EP4CE15E22C7 - 200 MHz FPGA, 15,408 LEs | Altera
MPN: EP4CE15E22C7 ✗ Son Kullanım ZamanıEP4CE15E22C7 Genel Bakış
A field-programmable gate array is a programmable digital semiconductor whose logic and interconnect resources are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, alongside complex programmable logic devices and system-on-chip programmable logic. The Cyclone IV E family provides configurable logic, memory and fixed I/O resources for embedded control, communications, signal processing and general-purpose digital systems.
Principal verified features include 15,408 cells or logic elements, 516,096 embedded memory bits, 81 I/O and a 200 MHz maximum frequency. One retrieved technical listing also reports 47 logic cells or logic blocks, while the official-distributor result identifies the device as a 15,408-cell FPGA. Because the supplied sources use inconsistent terminology for resource counts, engineers should verify the exact architecture and usable-resource definition in the manufacturer Cyclone IV E handbook before compiling a design.
The 1.2 V supply supports modern low-voltage digital cores, while the 144-pin exposed-pad package provides a substantial lead set for external memory and interfaces. Designers must follow the exact pin assignments, power-up requirements and exposed-pad connection specified by the manufacturer because those details are absent from the supplied search excerpts. Configuration programming, I/O standards, bank voltages and timing constraints also require confirmation from official design documentation.
Typical uses include industrial control, embedded instrumentation, communications gateways, digital logic prototyping and medium-complexity signal-processing systems. The 200 MHz headline frequency is a device attribute rather than a guarantee that every user design will close at 200 MHz; actual performance depends on architecture, timing constraints, I/O paths and tool support.
PCB implementation should preserve the package outline and 0.50 mm pitch, connect the exposed pad as directed, provide clean 1.2 V core decoupling and route high-speed interfaces with controlled impedance. Programming tool and bitstream compatibility should be validated before layout release.
This page consolidates verified distributor specifications, sourcing information and replacement-status guidance while explicitly separating supplied facts from unavailable pinout, pricing and compliance details.
Drop-in alternatifler için EP4CE15E22C7 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller EP4CE15E22C7 (aynı form faktörü ve ayağa oturma) — farklı olan Process Technology, Operating Temperature Range, Package, Speed Grade.
EP4CE15E22C7N
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EP4CE15E22C8N
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EP4CE15E22I7N
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
EP4CE15E22C7 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | Cyclone IV E field-programmable gate array (FPGA) |
| Logic Elements | 15,408 |
| Logic Cells / Logic Blocks | 47 |
| Embedded Memory | 504 Kb |
| Embedded Memory Bits | 516,096 bits |
| Maximum Operating Frequency | 200 MHz |
| I/O Count | 81 |
| Besleme Gerilimi | 1.2 V |
| İşletim Sıcaklığı Aralığı | 0°C to 85°C |
| Process Technology | 60 nm |
| Paket | 144-pin EQFP exposed pad |
| Package Body Size | 22 mm x 22 mm |
| Package Pitch | 0.50 mm |
| Pin Sayısı | 144 pins |
| Montaj Türü | Surface mount |
| Terminal Type | Gull wing |
| Package Shape | Square |
EP4CE15E22C7 square Pin Yapısı Kılavuzu
EP4CE15E22C7 (square paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: EP4CE15E22C7.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
EP4CE15E22C7 için uygundur 6 uygulamas: Industrial Control Logic, Communications Gateway, Digital Signal Acquisition, Programmable Instrumentation, Motor and Power-Control System, Embedded Processor Subsystem.
Industrial Control Logic
The EP4CE15E22C7 fits centralized industrial-control logic that benefits from 15,408 logic elements, 516,096 bits of embedded memory and as many as 81 I/O. Its stated 0°C to 85°C range is appropriate for ordinary commercial equipment, provided the enclosure does not require wider temperature grades. A practical design could place the FPGA beside sensors, actuator drivers and communication transceivers, then use a verified pin plan for control inputs, outputs and configuration. The 200 MHz device attribute supports moderate clocked logic, but it does not guarantee 200 MHz timing closure; engineers must constrain the actual control path and verify production timing. Toolchain compatibility and exposed-pad power construction are equally important before selecting the device.
Önerilen
Communications Gateway
The EP4CE15E22C7 can support protocol conversion, packet buffering and control-plane logic in a communications gateway when a design remains within 15,408 logic elements, 504 Kb of memory and 81 I/O. Parallel FPGA I/O can bridge a processor bus to serial PHY devices, while embedded memory can hold packet descriptors or buffering state. Its 1.2 V core operation fits contemporary digital power architecture, but every connected PHY may impose separate I/O voltage, timing and signal-integrity requirements that are absent from the supplied excerpts. Engineers should validate pin assignment, bank power, clock topology and timing closure in the applicable FPGA tools. The 200 MHz maximum should be treated as a device target rather than an unconditional interface rate.
Önerilen
Digital Signal Acquisition
The EP4CE15E22C7 is suitable for digital acquisition and preprocessing when incoming parallel data can be captured, filtered or packed using its 15,408 logic elements and 516,096 embedded memory bits. An ADC interface could feed configurable logic for triggering, filtering or data packing before data reaches memory or a processor. The 81-I/O figure provides a clear boundary: a design must map required data, control, clock and status signals without assuming that every package pin is available for user I/O. The 200 MHz maximum can support demanding pipelines, though guaranteed throughput depends on the selected speed grade and timing closure. Board-level input synchronization, impedance control and clock jitter must be evaluated separately from the device headline frequency.
Önerilen
Programmable Instrumentation
The EP4CE15E22C7 can implement sequencing, timing, data formatting and control functions in programmable test and measurement equipment. Its 15,408 logic elements provide substantial configurable digital capacity, while 504 Kb of memory can support state machines, calibration tables or acquisition buffers. The stated 0°C to 85°C range suits many indoor instrument environments, but precision analog performance still depends on separate converters, references and layout. The FPGA should receive clean clocks, use controlled-impedance routes and establish deterministic reset and configuration behavior. Although the device is listed at a 200 MHz maximum frequency, each instrument timing closure must be verified under real constraints. Configuration storage and programming support must also be confirmed before schematic release.
Önerilen
Motor and Power-Control System
The EP4CE15E22C7 can implement digital control, fault handling and sequencing around a motor controller or digital power system when the logic fits within 15,408 elements and 81 I/O. It could combine PWM generation, current-position processing and supervisory communication, while 504 Kb of embedded memory supports control tables or diagnostic records. The FPGA is not a power semiconductor and does not replace gate drivers, current sensors or protection hardware. Critical outputs require deterministic timing and safe default states after reset or configuration loss. The 1.2 V core must be paired with verified I/O-bank supplies and level shifting, and the 200 MHz figure must not be confused with control-loop or PWM frequency. Exposed-pad layout and thermal performance require the official package guidance.
Önerilen
Embedded Processor Subsystem
The EP4CE15E22C7 can implement a soft-logic control core, peripheral bridge or real-time state machine around an external processor. Its programmable logic is useful for accelerating deterministic tasks while its embedded memory supplies dedicated data storage, and 81 I/O offers a substantial connection budget for local buses and control signals. The processor and FPGA must agree on reset, interrupt, clocking and bus-width conventions because no processor-specific reference design is present in the supplied excerpts. The 144-pin exposed-pad package also demands careful power-plane and via planning to limit resistance and inductance. Use synchronous interfaces with registered endpoints where practical, then verify timing at the actual 1.2 V core condition. The maximum 200 MHz frequency does not eliminate external bus timing limits.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: EP4CE15E22C7 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | EP4CE15E22C7N | EP4CE15E22C8 | EP4CE15E22I7N |
|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera |
| Package | 144-pin EQFP exposed pad | 144-pin EQFP exposed pad | 144-pin EQFP exposed pad | 144-pin EQFP exposed pad |
Ana Farklılayıcılar
- The verified target specification provides both resource capacity and a 200 MHz device headline in one 144-pin exposed-pad FPGA. (karşılaştırma:EP4CE15E22I7N)
- The exact C7 ordering code is the version for which the supplied retrieved data directly reports 15,408 cells and 200 MHz maximum frequency. (karşılaştırma:EP4CE15E22C8)
- The target combines 15,408 logic elements with 516,096 embedded memory bits and 81 I/O for medium-complexity programmable-logic designs. (karşılaştırma:EP4CE15E22C7N)
Tasarım Notları
Design the 1.2 V core rail from the manufacturer power-tree and package recommendations rather than inferring every supply from the search excerpts. Place required bulk and bypass capacitance at the associated power pins, maintain the recommended supply sequencing and verify the exposed-pad connection against official package data. Do not assume the exposed pad is automatically ground-connected because that information is absent from the supplied material.
Use the official 144-pin EQFP exposed-pad land pattern, 0.50 mm pitch and package body dimensions of 22 x 22 mm. Preserve solder-mask and thermal-via geometry from the manufacturer reference design, and route high-speed or sensitive signals away from power-conversion and clock-source regions. The generic library mapping for a 144-pin TQFP is used only because the exact exposed-pad drawing was not supplied; verify the footprint against the real package before fabrication.
Treat the reported 200 MHz as a device-level maximum rather than a guaranteed routed frequency. Register high-speed I/O where appropriate, control impedance for external interfaces and use clocking and timing constraints that match the real design. Configuration, reset and user I/O behavior should be validated together so that every external device sees a deterministic state during power-up and reconfiguration.
Do not approve EP4CE15E22C7N, EP4CE15E22C8 or EP4CE15E22I7N solely from the presence of similar family names. Decode the complete ordering code and compare guaranteed timing, temperature grade, I/O count, memory, voltage, package drawings and exposed-pad behavior. For any genuine replacement, also confirm that the existing bitstream, Quartus programming flow and production timing results remain acceptable.
Uyumluluk Bilgisi
The supplied search results do not provide verified compliance declarations for the EP4CE15E22C7. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified device, but no separate automotive qualification is established.
