Ürünler (46.000+)

LAN9513-JZX - USB 2.0 Hub and 10/100 Ethernet | Microchip
LAN9513-JZX

LAN9513-JZX - USB 2.0 Hub and 10/100 Ethernet | Microchip

Microchip Technology LAN9513-JZX is an integrated USB 2.0 hub and 10/100 Ethernet controller with three downstream USB ports, one upstream USB port, and an integrated Ethernet MAC and PHY, supplied in a 64-QFN package. The device operates from a 3.3 V supply and is specified from 0°C to +70°C. A USB interface controller is a semiconductor that bridges a host controller or host computer with peripheral devices, while an Ethernet controller combines media-access control with physical-layer signaling. The LAN9513 belongs to the interface-controller and network-interface hierarchy, integrating USB hub, Ethernet, test-access-port, and EEPROM-control functions to reduce external circuitry in embedded USB-to-Ethernet products. The LAN9513-JZX provides three integrated downstream USB 2.0 PHYs, one integrated upstream USB 2.0 PHY, a 10/100 Ethernet PHY, and a 10/100 Ethernet controller. According to the manufacturer data sheet, the Ethernet section complies with IEEE 802.3 and IEEE 802.3u and supports 10BASE-T and 100BASE-TX links. It also supports full- and half-duplex operation with flow control, preamble generation and removal, and automatic 32-bit CRC generation and checking. The integrated TAP controller and EEPROM controller add system-management functions around the dual USB and Ethernet interfaces. This consolidation is valuable in embedded systems, desktop and notebook computers, printers, game consoles, and docking stations where designers need an economical and power-efficient USB-to-Ethernet or multi-port USB connectivity solution without assembling separate hub and Ethernet components. Typical implementation places the LAN9513-JZX between an upstream USB 2.0 host and an RJ45-based 10/100 Ethernet network. Its three downstream USB PHYs support hub ports while the integrated Ethernet MAC and PHY provide a network interface over twisted-pair cabling. The manufacturer documentation identifies embedded systems, PCs, notebooks, printers, consoles, and docking stations as representative applications. PCB implementation should follow the LAN9512/LAN9513/LAN9514 layout guidance, with particular attention to controlled-impedance USB and Ethernet routing, solid ground planes, decoupling near supply pins, isolation between sensitive analog network paths and digital switching paths, and unobstructed copper beneath the exposed pad. The LAN9513 reference design and Microchip application note AN 19.20 provide implementation-specific guidance. This product summary consolidates verified distributor pricing, package and electrical characteristics, source links, application guidance, and a drop-in replacement assessment. It distinguishes confirmed identical ratings from exact feature or pin differences that still require verification against the manufacturer data sheet before substitution.

RFQ İletişim
LAN9513I-JZX - USB 2.0 to 10/100 Ethernet Controller | Microchip
LAN9513I-JZX

LAN9513I-JZX - USB 2.0 to 10/100 Ethernet Controller | Microchip

Microchip's LAN9513I-JZX is a fully integrated Hi-Speed USB 2.0 hub and 10/100 Ethernet controller that combines an integrated USB 2.0 hub with three downstream USB 2.0 PHYs, an upstream USB 2.0 PHY, a 10/100 Ethernet MAC and PHY, a TAP controller and an EEPROM controller in a single 64-QFN (9x9 mm) package. It operates from a single 3.3 V supply over a 0 to 70 C ambient temperature range. A USB-to-Ethernet controller, also called an Ethernet bridge or USB network interface controller, is an interface IC that lets a host USB port present a standard 10BASE-T/100BASE-TX network connection to the outside world. Structurally it sits above the Ethernet PHY layer in the OSI hierarchy, and functionally it spans the USB device class, the Ethernet MAC layer and the physical layer, eliminating the need for a separate USB hub chip and a separate Ethernet interface component on the board. Key features of the LAN9513I-JZX include Hi-Speed USB 2.0 compliance, full and half-duplex 10/100 Ethernet operation with flow control, automatic 32-bit CRC generation and checking, preamble generation and removal, IEEE 802.3 and 802.3u compliance, and an on-chip EEPROM controller for configuration storage. Because the hub and Ethernet functions share one silicon die, the device also delivers USB-to-USB pass-through, meaning one upstream USB port can expand into three downstream ports while still exposing a wired network link. Internally, the LAN9513/LAN9513i family is partitioned into an upstream USB device controller, three downstream USB 2.0 PHY ports, a 10/100 Ethernet MAC with a full duplex-capable PHY, a TAP controller for test access and an EEPROM controller that emulates a 93C46/93C56 style serial EEPROM for host driver configuration. This partitioning allows a compact board area of roughly 9 x 9 mm of silicon for an entire network-and-USB connectivity block, which matters in docking stations, thin clients and embedded appliances where connector count is growing faster than board area. Typical applications include USB-to-Ethernet adapters and dongles, laptop docking stations, set-top and game console accessories, industrial HMI panels, printers with network ports, and embedded Linux or RTOS systems that need a bridged network interface without adding a discrete Ethernet PHY plus magnetics footprint for each port. When designing around this controller, treat the 64-QFN exposed pad as the primary thermal and layout feature: place input and decoupling capacitors close to the supply pins, keep the USB differential pair and Ethernet magnetics area separated from noisy switching nodes, and follow the reference layout and BOM in the manufacturer datasheet to preserve USB and Ethernet compliance. This page brings together the manufacturer datasheet facts, a side-by-side comparison against the closest pin-compatible controllers, and practical PCB, thermal and layout guidance that a distributor catalogue page does not normally assemble in one place.

RFQ İletişim
LAN9514-JZX - 4-Port USB 2.0 Hub, 10/100 Ethernet | Microchip
LAN9514-JZX

LAN9514-JZX - 4-Port USB 2.0 Hub, 10/100 Ethernet | Microchip

The Microchip Technology LAN9514-JZX is a highly integrated USB 2.0 hub and 10/100 Ethernet controller providing four USB ports and one Ethernet connectivity option in a 64-pin QFN package. It operates from a 3.3 V supply and is specified for a 0 °C to +70 °C temperature range. The LAN9514-JZX combines USB hub and Ethernet functionality for embedded systems, desktop PCs, notebook PCs, printers, game consoles, and docking stations. A USB hub controller is a semiconductor that expands one host USB connection into multiple peripheral connections while managing USB traffic and device attachment. The LAN9514 belongs to the interface-controller hierarchy that connects USB and Ethernet interfaces to an embedded host. Its integrated USB 2.0 hub and Ethernet MAC/PHY provide a compact connectivity solution without requiring separate USB hub and network-interface components. The LAN9514-JZX supports high-speed USB 2.0 operation, four USB hub ports, and 10BASE-T and 100BASE-TX networking through an integrated Ethernet PHY. Full- and half-duplex operation with flow control is supported, while automatic preamble generation and removal and 32-bit CRC processing support reliable Ethernet frame handling. IEEE 802.3 and 802.3u compliance is identified in the provided device information. The controller is designed to consolidate USB-to-USB and USB-to-Ethernet connectivity in compact embedded equipment. Its 3.3 V operating supply supports integration into conventional embedded, industrial, and consumer electronic systems. The integrated 10/100 PHY removes a separate Ethernet transceiver from the host-side design, reducing component count while preserving standard Ethernet frame support. Typical uses include USB docking stations, desktop and notebook connectivity, printers, game consoles, and embedded platforms that need both peripheral expansion and wired networking. In a docking station, the hub manages multiple USB peripherals while the Ethernet controller provides a 10/100 network connection. In an embedded controller, it can expose USB storage or communications peripherals alongside a wired Ethernet interface. Designers should use the manufacturer reference schematic and the complete pinout from the official datasheet when assigning power, ground, USB, Ethernet, clock, and control pins. The 64-pin QFN requires careful exposed-pad thermal management and short high-frequency connections. Magnetic Ethernet components, crystal support, decoupling, and the required layout details must be implemented according to the manufacturer reference design. This product page combines the verified manufacturer and distributor information with practical integration considerations, package-aware alternatives, and an explicit comparison of known LAN9514-family variants. It is intended to help engineers locate the datasheet, evaluate sourcing conditions, and determine whether a same-package replacement preserves the required USB hub and Ethernet functions.

RFQ İletişim
LAN9514I-JZX - USB 2.0 Hub and 10/100 Ethernet | Microchip
LAN9514I-JZX

LAN9514I-JZX - USB 2.0 Hub and 10/100 Ethernet | Microchip

The Microchip Technology LAN9514I-JZX is a highly integrated USB 2.0 hub and 10/100 Ethernet controller with USB 2.0, Ethernet MAC, Ethernet PHY, four downstream USB PHYs, an upstream USB PHY, a TAP controller, and an EEPROM controller integrated into a 64-QFN exposed-pad package measuring 9 x 9 mm. An Ethernet controller is a semiconductor that connects a computer or embedded system to an Ethernet physical layer. In this case, the LAN9514I-JZX combines a USB-to-Ethernet bridge with a four-port Hi-Speed USB hub. This integration gives a compact USB connectivity solution for systems that need one upstream USB connection, multiple USB peripherals, and a wired 10/100 network interface without implementing separate controllers on the main board. The device supports Hi-Speed USB 2.0 operation and 10BASE-T and 100BASE-TX networking. Its integrated Ethernet controller complies with IEEE 802.3 and IEEE 802.3u, supports full- and half-duplex operation, and includes flow control. The USB side provides four downstream ports through the integrated downstream PHYs, while the upstream USB PHY connects the device to a host controller. The LAN9514I-JZX is intended to operate from a 3.3 V supply, with a 1.8 V interface option identified in the device specifications. The industrial-temperature designation distinguishes this version from the standard LAN9514-JZX. The LAN9514I-JZX supports an ambient temperature range of -40°C to +85°C, whereas the standard LAN9514-JZX is specified from 0°C to +70°C. Both use the same 64-pin lead-free QFN package, but the wider temperature range makes the LAN9514I-JZX more appropriate for industrial equipment, networking appliances, printers, docking stations, and embedded systems operating beyond commercial temperature limits. Typical uses include USB-to-Ethernet adapters, multifunction docking stations, industrial control panels, network-attached peripherals, embedded Linux systems, and desktop or notebook connectivity products. A single upstream USB port can support attached USB peripherals while the Ethernet interface provides a stable wired connection to a local network. This reduces board area and component count compared with separate USB hub and Ethernet controller devices. The principal design consideration is power and signal integrity around the exposed-pad package. Follow the manufacturer datasheet for the 64-pin connection, pin assignment, decoupling requirements, clocking, magnetic-component interface, and exposed-pad land pattern. Keep high-speed USB and Ethernet routing away from noisy power-conversion stages, provide the specified local bypass capacitance, and use a controlled-impedance layout to preserve USB 2.0 and 10/100 Ethernet signal quality. This product page combines the LAN9514I-JZX device functions, verified package and temperature details, application guidance, compatibility boundaries, and practical design notes to support faster engineering evaluation and sourcing decisions.

RFQ İletişim
LAN9730-ABZJ - USB 2.0 to 10/100 Ethernet | Microchip
LAN9730-ABZJ

LAN9730-ABZJ - USB 2.0 to 10/100 Ethernet | Microchip

The Microchip Technology LAN9730-ABZJ is a single-chip USB 2.0 HSIC to 10/100 Ethernet controller with integrated 10BASE-T and 100BASE-TX PHY in a 56-pin QFN exposed-pad package. It supports 10 Mbps and 100 Mbps operation, operates from 1.2 V and 3.3 V supplies, and includes JTAG debugging, USB wake-up, power-on reset, programmable LED indication, and a low-power mode. The controller is designed for embedded systems, set-top boxes, PVRs, USB port replicators, and test instrumentation. An Ethernet controller is an interface IC that connects a host or embedded processor to an Ethernet physical layer. In this product, the LAN9730 combines an HSIC USB interface, Ethernet controller, and 10/100 PHY in one package. This integration reduces the number of external components required for USB-to-Ethernet connectivity while preserving support for the broad USB driver ecosystem available for high-speed inter-chip interfaces. The LAN9730-ABZJ uses USB 2.0 signaling to transfer data between an external USB host and the Ethernet network. Its integrated PHY supports 10BASE-T and 100BASE-TX, while the listed operating range of 0°C to +70°C targets commercial-temperature equipment. The 56-pin QFN-EP, 8 mm by 8 mm construction supports compact embedded and industrial designs requiring a surface-mount Ethernet interface. Its integrated feature set simplifies board design and firmware support. JTAG provides a dedicated hardware debug connection, USB wake-up allows the system to respond to network-related remote activity, and power-on reset provides a defined initialization point. Programmable LED indication supports link, activity, or speed-status reporting, while low-power mode helps reduce energy consumption when the network function is not required. Typical deployments include USB-to-Ethernet adapters in embedded Linux systems, network connectivity for set-top boxes and personal video recorders, industrial equipment requiring a compact Ethernet port, USB port replicators, and Ethernet-based test and measurement instruments. The device is particularly suitable when an embedded USB host needs a cost-conscious 10/100 Ethernet connection without using a larger host-side interface. The main layout consideration is the exposed thermal pad and the high-speed HSIC and Ethernet differential routing. Place the controller close to its HSIC host device, follow the reference design for high-speed trace geometry, provide clean power and ground connections, and route Ethernet pairs according to the manufacturer’s differential-pair layout guidance. Use the manufacturer LAN9730 reference design as the basis for component placement, decoupling, and PHY implementation. This page combines package, interface, feature, comparison, and design information to support component selection and PCB implementation. It also distinguishes confirmed substitutes from alternatives that require application-specific review, helping engineers avoid treating functionally similar USB-to-Ethernet devices as unconditional drop-in replacements.

RFQ İletişim
LAN9730-ABZJ-TR - USB 2.0 to 10/100 Ethernet | Microchip (Tape & Reel)
LAN9730-ABZJ-TR

LAN9730-ABZJ-TR - USB 2.0 to 10/100 Ethernet | Microchip (Tape & Reel)

The Microchip Technology LAN9730-ABZJ-TR is a single-chip USB 2.0 HSIC to 10/100 Ethernet controller with integrated 10BASE-T and 100BASE-TX PHY in a 56-pin QFN exposed-pad package. It supports 10 Mbps and 100 Mbps operation, operates from 1.2 V and 3.3 V supplies, and includes JTAG debugging, USB wake-up, power-on reset, programmable LED indication, and a low-power mode. The controller is designed for embedded systems, set-top boxes, PVRs, USB port replicators, and test instrumentation. An Ethernet controller is an interface IC that connects a host or embedded processor to an Ethernet physical layer. In this product, the LAN9730 combines an HSIC USB interface, Ethernet controller, and 10/100 PHY in one package. This integration reduces the number of external components required for USB-to-Ethernet connectivity while preserving support for the broad USB driver ecosystem available for high-speed inter-chip interfaces. The LAN9730-ABZJ-TR uses USB 2.0 signaling to transfer data between an external USB host and the Ethernet network. Its integrated PHY supports 10BASE-T and 100BASE-TX, while the listed operating range of 0°C to +70°C targets commercial-temperature equipment. The 56-pin QFN-EP, 8 mm by 8 mm construction supports compact embedded and industrial designs requiring a surface-mount Ethernet interface. Its integrated feature set simplifies board design and firmware support. JTAG provides a dedicated hardware debug connection, USB wake-up allows the system to respond to network-related remote activity, and power-on reset provides a defined initialization point. Programmable LED indication supports link, activity, or speed-status reporting, while low-power mode helps reduce energy consumption when the network function is not required. Typical deployments include USB-to-Ethernet adapters in embedded Linux systems, network connectivity for set-top boxes and personal video recorders, industrial equipment requiring a compact Ethernet port, USB port replicators, and Ethernet-based test and measurement instruments. The device is particularly suitable when an embedded USB host needs a cost-conscious 10/100 Ethernet connection without using a larger host-side interface. The main layout consideration is the exposed thermal pad and the high-speed HSIC and Ethernet differential routing. Place the controller close to its HSIC host device, follow the reference design for high-speed trace geometry, provide clean power and ground connections, and route Ethernet pairs according to the manufacturer’s differential-pair layout guidance. Use the manufacturer LAN9730 reference design as the basis for component placement, decoupling, and PHY implementation. This page combines package, interface, feature, comparison, and design information to support component selection and PCB implementation. It also distinguishes confirmed substitutes from alternatives that require application-specific review, helping engineers avoid treating functionally similar USB-to-Ethernet devices as unconditional drop-in replacements.

RFQ İletişim
LAN9730I-ABZJ-TR - USB 2.0 to 10/100 Ethernet Bridge | Microchip
LAN9730I-ABZJ-TR

LAN9730I-ABZJ-TR - USB 2.0 to 10/100 Ethernet Bridge | Microchip

The Microchip Technology LAN9730I-ABZJ-TR is a single-chip USB 2.0 to 10/100 Ethernet port bridge with USB interface integration, a 56-QFN surface-mount package, and an 8 mm by 8 mm body size. It provides a compact connectivity solution for embedded systems, set-top boxes, PVRs, USB port replicators, and test instrumentation. The LAN9730i is the industrial-temperature-range option in the LAN9730 family. A USB-to-Ethernet controller is an interface IC that bridges a USB host connection and a 10/100 Base-T Ethernet network. It integrates the digital controller, USB interface, Ethernet MAC, and 10/100 Ethernet PHY into one device, reducing component count and simplifying the hardware design compared with a discrete USB controller and Ethernet transceiver arrangement. This integration places the LAN9730I-ABZJ-TR within the hierarchy of network interface controllers, interface ICs, and semiconductors. The device supports USB 2.0 connectivity and 10/100 Ethernet operation in one 56-QFN package. Its principal engineering benefits are compact board area, fewer external interface components, and support for common embedded connectivity platforms. The integrated USB-to-Ethernet function is particularly useful where an existing USB host must provide network access without adding a separate Ethernet controller and physical-layer transceiver. The LAN9730/LAN9730i family uses a High-Speed Inter-Chip, or HSIC, interface between the USB and Ethernet functional sections according to the manufacturer documentation. This partitioned architecture supports a dedicated high-performance path between the USB controller and Ethernet blocks while allowing the physical-layer magnetics to remain external to the IC. The LAN9730i designation identifies the industrial-temperature-range option intended for applications requiring operation across a wider environmental range than the standard LAN9730 variant. Typical applications include embedded Linux systems, set-top boxes, personal video recorders, USB port replicators, industrial equipment, and Ethernet-enabled test instruments. It is especially relevant when a product already exposes USB but must present a standard 10/100 Ethernet connection to a network. The integrated bridge reduces routing and component count, although designers must still implement the Ethernet magnetics, isolation requirements, and connector path correctly. For layout, place the HSIC and USB differential traces as controlled-impedance routes and keep the Ethernet magnetics close to the PHY connections. Power, decoupling, clock, and high-speed signal paths require careful partitioning according to the manufacturer reference design. Review the LAN9730/LAN9730i datasheet and databook for the complete pin description, recommended application circuit, exposed-pad thermal requirements, and supported operating limits. This page organizes the verified package, protocol, application, lifecycle, and sourcing information for the LAN9730I-ABZJ-TR while adding application guidance, comparison context, and design-focused selection criteria for engineers evaluating USB-to-Ethernet connectivity.

RFQ İletişim
LC4032B-5T44C - 32-Macrocell 400MHz CPLD | Lattice
LC4032B-5T44C

LC4032B-5T44C - 32-Macrocell 400MHz CPLD | Lattice

The Lattice Semiconductor LC4032B-5T44C is a 3.3V, 2.5V, or 1.8V in-system-programmable SuperFAST high-density PLD with 32 macrocells, a maximum operating frequency of 400MHz, and a propagation delay of 2.5ns. It is supplied in a 48-pin TQFP package, making it suitable for compact systems that require reconfigurable glue logic, interface control, clock distribution, and protocol bridging. A complex programmable logic device, or CPLD, is a programmable logic device that combines nonvolatile configuration storage with a structured array of macrocells. In the hierarchy of programmable logic devices, a CPLD sits above simple programmable logic arrays and provides deterministic timing, repeated in-system programming, and logic capacity suitable for consolidating multiple small fixed-logic functions. The LC4032B family supports 32 macrocells and up to 80 product terms per output, according to the supplied manufacturer-family search result. The principal performance features are a 400MHz maximum operating frequency, 2.5ns propagation delay, support for as many as four global clock pins, and programmable clock-polarity control. The device can operate with 3.3V, 2.5V, or 1.8V supply rails, allowing integration into systems with mixed voltage requirements. Its in-system-programmable architecture supports configuration updates without removing the device from a circuit. The LC4032B implementation uses an electrically erasable programmable nonvolatile memory architecture for persistent configuration, avoiding external configuration PROM. Global clock resources support high-speed synchronous logic, while distributed product-term logic provides flexible combinational and registered functions. These resources are relevant in control-plane designs where a small FPGA may be excessive but fixed logic would be costly to revise. Typical uses include bus-interface decoding, display and keypad control, industrial control modules, peripheral glue logic, data acquisition systems, communications equipment, and FPGA or processor companion logic. The 48-pin TQFP provides a practical balance between routing access, thermal performance, and board-space requirements. Designers should verify the exact pin assignments, supported I/O standards, AC timing values, and configuration requirements against the manufacturer datasheet before layout. Decoupling, ground-plane continuity, clock routing, and unused-pin treatment are particularly important in high-speed CPLD designs, even when the logic function appears simple. This page combines verified device identity, family-level performance information, sourcing links, practical design guidance, and qualified comparison context that is not consolidated on a standard distributor listing.

RFQ İletişim
LC4032B-5T44I - 32 Macrocell 5 ns CPLD | Lattice
LC4032B-5T44I

LC4032B-5T44I - 32 Macrocell 5 ns CPLD | Lattice

The Lattice Semiconductor LC4032B-5T44I is an in-system-programmable complex programmable logic device with 32 macrocells, a 5 ns speed grade, and a 44-TQFP package. The verified distributor description identifies it as a SuperFAST high-density PLD supporting 3.3 V, 2.5 V, and 1.8 V operation. It combines programmable logic, nonvolatile configuration storage, and deterministic I/O in one device, making it suitable for compact control, interface, and signal-generation systems. The -5 suffix denotes the stated 5 ns speed grade, while -T44I identifies the 44-pin industrial-temperature ordering configuration. A CPLD is a user-programmable digital logic device that stores a logic configuration in nonvolatile memory. In the semiconductor hierarchy, a CPLD belongs to programmable logic devices and uses interconnected macrocells to implement Boolean and sequential functions. Compared with a software-driven processor, an LC4032B implementation can execute fixed logic immediately after configuration, while compared with a small FPGA it is organized around a simpler macrocell architecture suited to compact glue logic. The verified LC4032B data identifies 32 macrocells, 5 ns timing, and a 44-TQFP package as the principal selection parameters. The family description also supports 3.3 V, 2.5 V, and 1.8 V operating environments. In-system programmability permits a design to be configured or updated through its programming path without removing the package from production equipment, provided the board meets the device's stated electrical and pin requirements. Typical uses include industrial control interfaces, peripheral bus decoding, data acquisition front ends, programmable instrument logic, communication-interface conditioning, and embedded control functions. Its fixed nonvolatile configuration supports repeatable startup behavior because no firmware-driven configuration sequence is required for established logic. Design work should begin with the manufacturer datasheet because macrocell capacity, dedicated pins, supported I/O standards, timing, power behavior, and programming requirements are not completely characterized by the provided search results. Confirm that every external signal, supply rail, pull state, and programming connection matches the exact datasheet before releasing a PCB. This page consolidates the verified distributor identification, available source links, package details, and engineering-selection context. It also distinguishes confirmed facts from missing specifications so procurement and design teams can assess fit without relying on unsupported inferred values.

RFQ İletişim
LC4032B-5T48C - 32-Macrocell 400 MHz CPLD | Lattice
LC4032B-5T48C

LC4032B-5T48C - 32-Macrocell 400 MHz CPLD | Lattice

The Lattice Semiconductor LC4032B-5T48C is an ispMACH 4000B complex programmable logic device with 32 macrocells, a maximum operating frequency of 400 MHz, and a 2.5 ns propagation delay. It is supplied in a 48-pin TQFP package and supports in-system programmable SuperFAST high-density PLD applications. The verified device description also identifies the family as a blend of the ispLSI 2000 and ispMACH 4A architectures, combining programmable logic density with high-speed operation. An ispMACH 4000B CPLD is a programmable logic device in the broader semiconductor hierarchy of complex programmable logic devices, field-programmable logic arrays, and programmable digital logic. It is used when a design requires deterministic programmable logic, system-level integration, and in-system programming rather than a fixed application-specific standard product. The LC4032B-5T48C is appropriate for control logic, interface logic, signal conditioning, glue logic, and embedded control functions that require more integration than a simple programmable logic array while retaining flexible field programmability. Key verified features include 32 macrocells, a 400 MHz maximum operating frequency, and 2.5 ns propagation delay. The family description states that the device is a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. The product search data also identifies the device as the ispMACH 4032B 2.5 V version. The combination of programmable logic density and high maximum frequency supports compact designs that need fast combinational and sequential logic while preserving post-assembly programmability. The device belongs to the Lattice ispMACH 4000 family, which combines two established Lattice architectures according to the retrieved product description. This architecture can be useful for designs that need programmable pin assignment, logic implementation, timing control, and system integration. Designers should evaluate the complete TQFP pinout, power rails, clocking, I/O standards, and timing requirements against the manufacturer datasheet before finalizing a PCB or production configuration. Typical applications include industrial control and automation, embedded interface logic, communication equipment, test and measurement systems, and general-purpose digital control. Its 400 MHz maximum operating frequency is relevant to control-path and data-path blocks, while its 32 macrocells provide a moderate logic capacity for consolidating multiple fixed-logic functions into one programmable device. The LC4032B-5T48C can reduce discrete logic count when the design is stable enough to implement in a CPLD. When designing with the LC4032B-5T48C, verify the exact TQFP pin assignment, supply requirements, I/O compatibility, and programming configuration from the official manufacturer documentation. The verified search results provide a genuine manufacturer-linked datasheet reference and distributor listings, but they do not provide a complete verified pin table or current unit-price values. Those details must therefore be confirmed before release to manufacturing or use in a live procurement decision. This product data page combines verified source links, manufacturer-family positioning, identified electrical highlights, package information, and engineering-oriented design guidance. It also distinguishes confirmed information from fields that require direct datasheet review, helping engineers evaluate the LC4032B-5T48C for high-speed programmable-logic designs without treating unverified assumptions as specifications.

RFQ İletişim
LC4032B-5T48I - 400MHz 32-Macrocell CPLD | Lattice
LC4032B-5T48I

LC4032B-5T48I - 400MHz 32-Macrocell CPLD | Lattice

The Lattice Semiconductor LC4032B-5T48I is an in-system-programmable, SuperFAST high-density PLD with 32 macrocells, a maximum operating frequency of 400 MHz, and a 2.5 ns propagation delay. It is offered in a 48-lead TQFP package and supports 3.3 V, 2.5 V, and 1.8 V operation, making it suited to compact, high-speed control and interface logic. A complex programmable logic device, or CPLD, is a programmable digital integrated circuit that combines nonvolatile logic storage, configurable macrocells, and programmable interconnect resources. A CPLD occupies the hierarchy between basic programmable array logic and more complex programmable systems. Its electrically erasable configuration allows a finished PCB to be programmed or reprogrammed without replacing the device. The LC4032B family is positioned for fast deterministic logic. Verified source data identifies up to four global clock pins, programmable clock-polarity control, and as many as 80 product terms per output. These features allow multiple clock domains, registered control logic, bus arbitration, address decoding, and interface bridging to be consolidated in one configurable device. In-system programmability also supports production programming, field upgrades, and design revisions after PCB assembly. The -5 speed designation corresponds to the verified maximum frequency of 400 MHz and propagation delay of 2.5 ns. The industrial suffix identifies the ordering variant, but exact junction-temperature limits, current consumption, and absolute maximum ratings were not included in the supplied verified records and are therefore not inferred here. Designers should use the manufacturer datasheet for timing constraints, pin states, power-up behavior, AC/DC limits, and programming requirements before release to production. Typical uses include industrial control, communication interfaces, test equipment, data acquisition, peripheral control, and compact high-speed logic blocks. At 32 macrocells, the device is most appropriate for moderate-density designs where deterministic timing, simple integration, and in-system reconfiguration are more valuable than the routing capacity and register resources of a large FPGA. The primary design consideration is timing closure. External interfaces should be assigned to pins with compatible standards, clock and reset distribution must follow the datasheet topology, and unused pins must remain in their specified safe states. Timing constraints should be applied to the actual tool version and design because device speed, interconnect paths, product-term routing, and registered or combinational assignments determine final system performance. This page combines the verified device summary, source links, structured technical specifications, application guidance, and honest replacement analysis. It also separates confirmed facts from missing parameters so procurement and engineering teams can identify what must be checked in the manufacturer documentation before PCB release.

RFQ İletişim
LC4032C-5T44C - 400MHz SuperFAST CPLD | Lattice Semiconductor
LC4032C-5T44C

LC4032C-5T44C - 400MHz SuperFAST CPLD | Lattice Semiconductor

Lattice Semiconductor LC4032C-5T44C is a 32-macrocell, in-system-programmable SuperFAST CPLD in a 44-pin TQFP package. It supports 3.3 V, 2.5 V, and 1.8 V supply operation, reaches a maximum operating frequency of 400 MHz, and provides a 2.5 ns propagation delay. These characteristics position the device for glue-logic, interface bridging, control, and system-level programmable logic designs requiring fast timing and in-system reconfiguration. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines configurable logic blocks and programmable interconnect. In the product hierarchy, a CPLD belongs to programmable logic devices alongside FPGAs. Unlike mask-programmed logic, a CPLD can be configured by the end user after manufacture. The LC4032C belongs to Lattice's ispMACH 4000 family, described in the manufacturer datasheet as a blend of the ispLSI 2000 and ispMACH 4A architectures. The device provides 32 macrocells and up to 80 product terms per output. It includes up to four global clock pins with programmable clock polarity control, enabling deterministic clock distribution across compatible logic functions. The -5 speed designation corresponds to the cited 400 MHz maximum operating frequency, while the C suffix identifies the 1.8 V-capable version within the family's 3.3 V, 2.5 V, and 1.8 V supply options. The 44C package suffix identifies the 44-pin TQFP physical configuration. In-system programmability permits configuration over the board's programming interface, useful for manufacturing, field updates, and designs that need programmable logic behavior without changing external components. The verified source describes the device as an ispMACH 4032B with 32 macrocells. Exact pin assignments, bank voltage limits, absolute maximum ratings, and package dimensions must be checked against the manufacturer datasheet before schematic sign-off or PCB release. Typical applications include bus-interface adapters, peripheral controllers, arbitration and decode logic, data-format conversion, industrial control modules, instrumentation front ends, and FPGA glue logic. Its 2.5 ns propagation delay is valuable where combinational decisions must settle rapidly, while the 400 MHz ceiling supports demanding clocked logic when board-level timing budgets allow. Design with this CPLD using the manufacturer pinout and timing constraints. Account for configuration pins, dedicated ground and power pins, decoupling, signal integrity, and programming-interface access. Because its logic performance is highly dependent on routing and architecture, treat the maximum frequency as a device-family headline rather than a guaranteed system-level frequency without timing verification. This page consolidates the verified distributor listing, family-level performance data, package identity, practical implementation notes, and replacement analysis. It is intended to help engineers evaluate the LC4032C-5T44C and distinguish exact same-package variants from options requiring different footprints, speed grades, temperature grades, or programming-system validation.

RFQ İletişim
LC4032C-5T44I - 32-Macrocell 400MHz CPLD | Lattice
LC4032C-5T44I

LC4032C-5T44I - 32-Macrocell 400MHz CPLD | Lattice

The Lattice Semiconductor LC4032C-5T44I is a 3.3V/2.5V/1.8V in-system-programmable SuperFAST high-density PLD with 32 macrocells, a maximum operating frequency of 400MHz, and a 2.5ns propagation delay. It is supplied in a TQFP PLD package identified by the 44-pin ordering code. A CPLD is a complex programmable logic device: a user-programmable semiconductor that combines programmable logic structures with a defined pin architecture. Within the broader FPGA & CPLD category, a CPLD is generally selected when deterministic timing, in-system programmability, compact logic integration, and a straightforward package are more important than the very high logic density of an FPGA. The LC4032C belongs to Lattice's ispMACH 4000 family and supports 3.3V, 2.5V, and 1.8V supply options. The verified device data identifies up to four global clock pins with programmable clock polarity control, routing to as many as 80 physical outputs. Its -5 speed designation is associated with the published 400MHz maximum operating frequency and 2.5ns propagation-delay class. The -5T44I ordering information identifies the package and industrial-temperature ordering variant, although the exact numeric temperature limits and package dimensions were not supplied in the verified excerpts. The LC4032C-5T44I is useful for control logic, bus decoding, state machines, interface glue, clock-domain-adjacent control functions, and general-purpose signal processing that benefits from deterministic CPLD timing. In-system programming allows a board to be configured or reconfigured without removing the device, supporting production programming, field updates, and logic revisions when the system architecture is designed for it. Designers should preserve the device's documented power, clock, programming, and decoupling requirements from the full LC4032C datasheet. Treat every clock distribution, output enable, and I/O standard as a timing-constrained path, and verify unused pins, signal integrity, and power sequencing before release. Because only verified excerpts were supplied, exact I/O counts, memory details, supply-current limits, temperature range, and package dimensions remain marked for data completion rather than being inferred. This page combines verified product facts, sourcing evidence, application guidance, and replacement constraints. It deliberately avoids unverified cross-brand claims: the supplied web results confirm the device and its family characteristics but do not establish a qualified, pin-compatible replacement in the same TQFP package.

RFQ İletişim
LC4032C-5T48C - 32-Macrocell 5ns CPLD | Lattice
LC4032C-5T48C

LC4032C-5T48C - 32-Macrocell 5ns CPLD | Lattice

The Lattice Semiconductor LC4032C-5T48C is a 32-macrocell complex programmable logic device with a listed 5 ns speed grade, supplied in a 48-pin TQFP package. The verified distributor records identify it as a super-fast high-density PLD/CPLD and expose the ordering code LC4032C-5T48C-ND for procurement. The package combines programmable combinational and registered logic with nonvolatile configuration retention, making the device useful where control, decoding, interface adaptation, and fixed-format digital logic must be consolidated onto one programmable component. A CPLD is a user-programmable digital logic device that sits between fixed-function gate arrays and higher-end FPGAs in the broader semiconductor hierarchy. Unlike a microcontroller that executes software sequentially, a CPLD configures interconnected logic blocks into parallel hardware circuits. That architecture can provide deterministic control behavior without a software event loop, while in-system programmability supports design iteration, configuration storage, and field updates when the surrounding platform supports them. The verified source identifies the LC4032C family as a super-fast, high-density PLD, while the distributor ordering code identifies this exact variant as a 32-macrocell device with a 5 ns speed designation in a 48-pin TQFP package. Those are the only performance values confirmed in the supplied data. Core supply voltage, macrocell architecture details, I/O standards, propagation-delay breakdown, maximum operating frequency, current consumption, and supported input/output counts remain unverified and must be confirmed in the manufacturer datasheet before release to production. Typical uses include industrial control logic, peripheral glue, bus decoding, state-machine implementation, data-format conversion, board-level sequencing, and embedded subsystem interfaces. A CPLD is especially useful when several small control blocks must operate concurrently, external logic has grown beyond simple gates, or a product revision is likely. The exact architecture should be selected by compiling the intended design with the supported Lattice toolchain and checking timing against the external interface requirements. The 48-pin TQFP is a PCB-surface-mount package associated with the TQFP family. Before layout, verify the exact pin assignments, exposed-pad status, pin multiplexing, and programming interface from the official LC4032C documentation. The compact package helps reduce board area, but fine-pitch routing requires adequate clearances, a reliable ground plane, and careful decoupling around every applicable supply pin. A practical design review should compare the 5 ns family designation with the actual timing closure required by the slowest clock-domain crossing or I/O path. Device speed grade alone does not guarantee system timing; board delay, external component delay, constraints, and selected I/O mode must be included. For sourcing, compare the DigiKey, Octopart, and distributor availability records as of 2026-10-23, then obtain an authorized quotation for production quantities. This page consolidates the verified distributor descriptions, package and device-class details, sourcing links, and engineering cautions for LC4032C-5T48C. It deliberately distinguishes confirmed MPN data from electrical parameters that remain unavailable, helping engineers locate the part, assess package compatibility, and plan the next verification step without treating unconfirmed specifications as production facts.

RFQ İletişim
LC4032C-5T48I - 400MHz 32-Macrocell ISP CPLD | Lattice
LC4032C-5T48I

LC4032C-5T48I - 400MHz 32-Macrocell ISP CPLD | Lattice

The Lattice Semiconductor LC4032C-5T48I is a 3.3V/2.5V/1.8V in-system programmable SuperFAST high-density PLD with 32 macrocells, a 400MHz maximum operating frequency, and a 2.5ns propagation delay in a TQFP package. The device combines programmable logic, in-system programmability, and high-speed timing in one reconfigurable semiconductor. A CPLD, or complex programmable logic device, is a user-programmable digital logic semiconductor within the broader FPGA and programmable-logic hierarchy. Its interconnected programmable logic blocks provide deterministic timing and flexible implementation of combinational and sequential functions. The LC4032C family is positioned for designs requiring high-density logic, compact integration, and field-reconfigurable control or interface functions. The verified LC4032C-5T48I listing identifies support for 3.3V, 2.5V, and 1.8V operation, up to four global clock pins, programmable clock polarity, and routing to 80 product-term outputs. The 400MHz maximum operating frequency and 2.5ns propagation delay make the device useful where logic timing margin matters. The -5 speed designation and industrial temperature suffix indicate the ordering variant, although detailed electrical limits require the manufacturer datasheet. Typical applications include system control, bus arbitration, protocol-interface glue logic, industrial automation, instrumentation, and embedded control. In a control design, the CPLD can consolidate fixed logic functions while retaining the option to update the configuration when board requirements evolve. In a timing-sensitive interface, the global-clock structure can help distribute registered logic across the device. PCB design should preserve the manufacturer-recommended package footprint and verify every power, ground, clock, and I/O connection against the datasheet pinout. Designers should also account for configuration-control timing, unused pins, supply sequencing, and the specified operating voltage. Programming files, pull resistors, clock requirements, and I/O standards must be checked in the applicable device documentation before release to production. This page consolidates verified manufacturer and distributor references for LC4032C-5T48I, highlights the 32-macrocell and 400MHz positioning, and separates documented facts from parameters requiring engineering confirmation. It is intended to support component identification, sourcing, and design review rather than replace the complete Lattice datasheet.

RFQ İletişim
LC4032V-5T44C - 32-Macrocell 400 MHz CPLD | Lattice
LC4032V-5T44C

LC4032V-5T44C - 32-Macrocell 400 MHz CPLD | Lattice

Lattice Semiconductor LC4032V-5T44C is an in-system-programmable SuperFAST high-density CPLD built around the ispMACH 4000 architecture. The device provides 32 macrocells, supports 3.3 V, 2.5 V and 1.8 V operation, and reaches a maximum operating frequency of 400 MHz with a 2.5 ns propagation delay. It is supplied in a 44-pin TQFP package and is associated with up to 30 I/O in distributor specifications. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic arrays, and general-purpose input/output resources. Within the broader programmable-logic hierarchy, a CPLD sits between simple programmable logic arrays and field-programmable gate arrays. The LC4032V belongs to Lattice's ispMACH 4000 family, which blends the ispLSI 2000 and ispMACH 4A architectures and targets logic-intensive control, interface, and signal-processing designs. The LC4032V-5T44C provides up to four global clock inputs with programmable clock-polarity control. Its macrocell structure supports up to 80 product terms per output, giving designers additional logic depth when implementing control logic, bus arbitration, state machines, or data-routing functions. The 5 speed designation corresponds to the reported 2.5 ns propagation-delay grade, while the maximum operating frequency is listed as 400 MHz. In-system programmability allows the configuration memory to be programmed or updated through the device's programming interface, simplifying production programming and permitting field updates where the system architecture supports that workflow. The architecture combines configurable logic with dedicated I/O resources, making the device useful for consolidating discrete glue logic into a single programmable device while retaining deterministic timing behavior. Typical uses include industrial control and automation, embedded interface logic, communications control, test and measurement signal conditioning, and general-purpose logic consolidation. A design using this CPLD should preserve adequate routing and timing margin for the selected clock domain, especially when combinational paths approach the specified 2.5 ns delay. PCB planning must also follow the verified land pattern, power-decoupling requirements, and programming-interface recommendations in the manufacturer datasheet. This page distinguishes verified device facts from unavailable details rather than estimating missing electrical, thermal, package, and lifecycle information. The linked datasheet and distributor records should be consulted for authoritative pin assignments, absolute maximum ratings, AC timing, recommended operating conditions, and programming details before schematic capture or PCB release. The practical value of this product data lies in its consolidated comparison of the verified 400 MHz, 2.5 ns, 32-macrocell architecture, documented speed-grade alternatives, package identity, programming characteristics, and design constraints. It supports initial component selection while clearly identifying specifications that require confirmation from the original manufacturer documentation.

RFQ İletişim
LC4032V-5T44I - Fast 3.3V In-System CPLD | Lattice
LC4032V-5T44I

LC4032V-5T44I - Fast 3.3V In-System CPLD | Lattice

Lattice Semiconductor LC4032V-5T44I is an in-system programmable, high-density complex programmable logic device (CPLD) supporting 3.3 V, 2.5 V, and 1.8 V operation in a 44-pin TQFP surface-mount package measuring 10 mm by 10 mm. It is configured for 5 ns-class performance, uses an internal supply range of 3 V to 3.6 V, and is specified for an industrial junction-temperature range of -40 °C to 105 °C. A CPLD is a programmable-logic semiconductor that combines a non-volatile configuration architecture with deterministic timing and in-system programming. In the product hierarchy, this component belongs to the CPLD family within programmable logic, alongside FPGA and other programmable-logic devices. Its principal engineering advantage is that an existing PCB can be revised without replacing the device when the programmed logic or interface requirements change. The LC4032V-5T44I combines in-system programmability with support for three principal supply levels. The 5 ns speed designation identifies it for timing-sensitive logic implementations, while the 3.3 V, 2.5 V, and 1.8 V capability allows designers to connect it to mixed-voltage system interfaces. Its 44-pin TQFP package provides a standard surface-mount assembly option, and the specified -40 °C to 105 °C junction-temperature range supports industrial equipment. The device is part of Lattice Semiconductor’s SuperFAST high-density PLD family and is intended for designs requiring compact, deterministic programmable logic rather than a large FPGA. In-system programming supports design iteration and production programming without relying on a separate dedicated configuration device. The verified source data does not provide detailed macrocell, pin, timing, or power specifications, so those values should be confirmed in the complete Lattice Semiconductor datasheet before release. Typical uses include bus-interface logic, industrial control and automation, embedded system glue logic, communications-interface conditioning, and general-purpose PCB logic consolidation. The 44-pin TQFP package is particularly suitable for moderate-complexity designs where a fine-pitch BGA would complicate assembly and inspection. Designers should verify the complete pinout, supported I/O standards, recommended decoupling, configuration behavior, and AC timing specifications in the manufacturer datasheet. Because the verified excerpts do not expose the pin table, this product page does not infer individual pin assignments or provide a reconstructed pinout. This page combines the verified distributor and manufacturer-document links with same-family drop-in candidates, sourcing details, package information, pricing availability, and practical engineering guidance. It clearly separates documented facts from parameters that still require confirmation from the full manufacturer datasheet.

RFQ İletişim
LC4032V-5T48C - 3.3V 32 I/O 5ns CPLD | Lattice
LC4032V-5T48C

LC4032V-5T48C - 3.3V 32 I/O 5ns CPLD | Lattice

The Lattice Semiconductor LC4032V-5T48C is a 3.3 V, 32-macrocell complex programmable logic device with 32 user I/O pins, a 5 ns propagation delay, and in-system programmability in a 48-pin TQFP package. It belongs to the ispMACH 4000V family, combining a SuperFAST high-density architecture with nonvolatile configuration memory for deterministic logic implementation after power-up. A complex programmable logic device, or CPLD, is a programmable digital semiconductor used when a design requires more integration and routing flexibility than discrete gates but does not justify the resource and power cost of an FPGA. Within the product hierarchy, the LC4032V-5T48C is a CPLD, a programmable logic device, and ultimately a semiconductor. Its 32 macrocells and 32 user I/O pins make it suitable for consolidating interface control, decoding, bus arbitration, address translation, and general-purpose glue logic. The verified device information identifies a 5 ns propagation-delay grade, 3.3 V operation, 32 user I/O pins, and a 48-TQFP surface-mount package. Its in-system programming capability allows a board to be programmed or reconfigured without removing the device, which supports manufacturing test, field updates, and prototype development. The LC4032V designation identifies the 4000V-family device, while the -5 suffix identifies the stated 5 ns speed grade. The TQFP-48 package provides a conventional surface-mount footprint and a high pin count for external logic connections. Applications include peripheral interfacing, data acquisition systems, test equipment, industrial controllers, communication interfaces, and embedded control platforms where a compact CPLD can consolidate multiple decode and control functions. The Lattice ispMACH 4000V device can also be used as an interface between slower processors and higher-speed peripherals. Because this part is a programmable logic device rather than a hardwired standard IC, its exact I/O count, voltage ratings, timing boundaries, and operating-temperature limits must be confirmed against the applicable Lattice datasheet before schematic release. Designers should also verify the programming algorithm, pin assignments, supply requirements, and JTAG topology using the manufacturer's device documentation and software. When designing a board around the LC4032V-5T48C, follow the manufacturer's decoupling, programming-interface, signal-integrity, and unused-pin recommendations exactly. Treat every I/O as a configurable bank only after confirming its supported voltage and termination behavior in the specific speed and temperature grade. This page consolidates verified distributor data, same-family drop-in alternatives, package information, and design guidance. It also distinguishes documented facts from specifications that still require confirmation from the manufacturer datasheet, helping engineers qualify the part without relying on unverified memory-derived values.

RFQ İletişim
LC4032V-5T48I - 32-Macrocell 5 ns CPLD | Lattice
LC4032V-5T48I

LC4032V-5T48I - 32-Macrocell 5 ns CPLD | Lattice

Lattice Semiconductor LC4032V-5T48I is a 32-macrocell CPLD with a 5 ns propagation delay, 32 I/O pins, and two logic blocks in a TQFP-48 package. It supports 3.3 V, 2.5 V, and 1.8 V operation and an industrial junction-temperature range from -40°C to 105°C. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy, alongside FPGA and other non-volatile programmable IC families. CPLDs combine configurable logic and routing with a non-volatile configuration architecture, making them useful for implementing fixed control, interface, decoding, glue-logic, and state-machine functions without continuously reprogramming a flash-based configuration memory. The LC4032V-5T48I provides 32 macrocells, 32 user I/O pins, and two logic blocks according to the available product data. Its nominal 5 ns propagation delay is the principal timing figure for combinational designs. Multi-voltage operation at 3.3 V, 2.5 V, and 1.8 V allows the device to connect with logic operating at different voltage levels. The industrial temperature rating supports applications requiring operation from -40°C to 105°C at the junction. The device belongs to Lattice’s ispMACH 4000V high-density PLD family and uses in-system programmability. This capability supports configuration programming while the device is connected in its target circuit, reducing board-assembly steps and allowing production programming or field updates when the implementation architecture permits it. The five-pin speed grade and the T48 package identifier distinguish this ordering code from other members of the family. Typical uses include industrial control logic, communication-interface decoding, bus arbitration, peripheral interfacing, data-format conversion, embedded state-machine control, and compact logic consolidation. The 32 I/O count makes the device most appropriate for designs whose signal count and timing requirements fit within the macrocell and package resources of the LC4032V family. Designers should verify the complete pinout, supported I/O standards, input thresholds, output drive, configuration pins, and AC timing tables against the manufacturer datasheet before layout release. The available search data does not provide the individual pin assignments, so no pin names are inferred in this record. PCB design must also preserve the TQFP-48 footprint and provide suitable configuration and decoupling connections. This page consolidates the verified distributor, manufacturer-document index, and cross-reference information for the LC4032V-5T48I, then adds package-specific design guidance, procurement context, and an explicit assessment of where verified drop-in alternatives are unavailable. Pricing and detailed pin assignments remain marked for confirmation rather than being inferred.

RFQ İletişim
LC4032ZC-5M56C - 400MHz SuperFAST CPLD | Lattice Semiconductor
LC4032ZC-5M56C

LC4032ZC-5M56C - 400MHz SuperFAST CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4032ZC-5M56C is an in-system-programmable SuperFAST high-density complex programmable logic device with a maximum operating frequency of 400 MHz, 2.5 ns propagation delay, and a 56-ball CABGA package. It operates from 3.3 V, 2.5 V, or 1.8 V and is designed for logic implementations requiring fast deterministic routing and high I/O density. A complex programmable logic device, or CPLD, is a programmable semiconductor within the broader FPGA and programmable-logic hierarchy. Unlike a software-controlled processor, a CPLD executes fixed Boolean logic directly from its configuration memory. The ispMACH 4000Z architecture combines nonvolatile configuration with deterministic timing, making it useful for control logic, interface adaptation, protocol conversion, and signal processing functions that must operate predictably after power-up. The LC4032ZC-5M56C provides 400 MHz maximum operating frequency, 2.5 ns minimum propagation delay, and up to four programmable global clock pins with programmable clock polarity control. Its 32 user I/Os support connections to external digital systems, while the three supported supply levels allow the device to be integrated into designs operating at 1.8 V, 2.5 V, or 3.3 V. In-system programming supports configuration updates without removing the device from its circuit. The device belongs to Lattice Semiconductor's ispMACH 4000Z family of CMOS complex programmable logic devices. Its high-density architecture is intended for designs that need more logic capacity and I/O flexibility than basic GAL-type devices while retaining the straightforward programming model and deterministic behavior associated with CPLDs. The maximum frequency and propagation-delay figures represent performance capabilities that depend on the selected logic design and timing constraints. Typical applications include industrial control and automation, communication-interface logic, test and measurement equipment, embedded system peripheral expansion, and compact general-purpose logic consolidation. The 56-ball surface-mount package can also help reduce board area when its I/O and power requirements match the PCB land pattern. Signal integrity and power planning remain important at high clock rates. Designers should preserve the manufacturer's recommended decoupling configuration and use the pin description table when assigning the ball grid. PCB trace routing must account for the short distance between clock inputs, global clock networks, and general I/O banks. Because configuration storage is nonvolatile, the programmed logic remains available after power restoration, subject to normal power-up timing requirements. This page combines device specifications, package details, configuration guidance, comparison criteria, and application-oriented design notes. It also identifies package-compatible Lattice variants while clearly separating confirmed attributes from details that require verification in the manufacturer datasheet before a new PCB or replacement decision.

RFQ İletişim
LC4032ZC-5M56I - 400MHz 32-Macro-Cell CPLD | Lattice
LC4032ZC-5M56I

LC4032ZC-5M56I - 400MHz 32-Macro-Cell CPLD | Lattice

Lattice Semiconductor LC4032ZC-5M56I is an in-system programmable SuperFast high-density complex programmable logic device with 32 macro cells, 32 user I/Os, and a 49-pin CABGA package. It supports 1.8 V, 2.5 V, and 3.3 V supply operation, reaches a maximum operating frequency of 400 MHz, and is listed with a 2.5 ns propagation delay. The device also provides 192 MHz internal frequency and up to four programmable global clock pins. These characteristics position it for deterministic control, interface, glue-logic, and signal-routing tasks where reconfigurable logic is preferable to a fixed application-specific integrated circuit. A complex programmable logic device, or CPLD, is a programmable semiconductor in the FPGA and CPLD family. Unlike a mask-programmed logic device, a CPLD retains its programmed configuration in nonvolatile memory and can be reprogrammed during production, field updates, or in-system operation. Its architecture combines configurable logic blocks, programmable interconnect, input/output blocks, and global clock resources. This places it between simple fixed-logic devices and higher-capacity FPGAs in the broader programmable-logic hierarchy. Key features include 32 macro cells, 32 user I/Os, a 400 MHz maximum operating frequency, and a 2.5 ns stated propagation delay. The listed 192 MHz internal frequency provides a separate performance reference for the device architecture. Operation from 1.8 V through 3.3 V gives designers flexibility across low-voltage system rails, while four global clock pins support distributed clocking and multi-domain control logic. In-system programmability also allows configuration updates without removing the device from its operating environment. The combination of 32 macro cells and 32 user I/Os enables moderately complex control paths, bus arbitration, protocol bridging, state-machine implementation, and peripheral-interface logic. The 400 MHz headline frequency is relevant for timing-critical synchronous designs, although real system performance also depends on the selected architecture, external memory interface, input/output standards, clocking topology, and timing constraints used during implementation. The 2.5 ns propagation-delay figure should therefore be treated as a device-level reference rather than a guarantee for every routed path. Typical applications include industrial control and factory automation, communications-interface logic, instrumentation, consumer equipment, embedded control, and general-purpose prototype or production-programming boards. The device is especially useful when a design requires nonvolatile configuration, modest logic density, numerous user I/Os, and rapid implementation changes without moving to a larger programmable-logic device. PCB design should preserve the manufacturer's recommended power, ground, clock, and programmable-interface layout. Decoupling capacitors must be placed close to the appropriate supply pins, clock routes should remain short and controlled, and unused inputs should be assigned explicitly in the design tool. Programming-system compatibility, pin constraints, and the exact CABGA land pattern must be checked before the footprint is released for fabrication. This product record combines the exact LC4032ZC-5M56I configuration, package and timing characteristics, sourced replacement information, application guidance, and design-focused selection criteria. It supports engineers comparing programmable-logic capacity, voltage options, clock resources, and board-level replacement decisions before beginning schematic capture.

RFQ İletişim
LC4032ZC-5T48C - 32-Macrocell 1.8V CPLD | Lattice
LC4032ZC-5T48C

LC4032ZC-5T48C - 32-Macrocell 1.8V CPLD | Lattice

Lattice Semiconductor LC4032ZC-5T48C is a 32-macrocell CPLD with 32 I/O pins, a 5 ns propagation delay, and 250 MHz operating performance in a 48-pin TQFP surface-mount package. The device belongs to the ispMACH 4000Z high-density programmable logic device family and supports 1.8V operation with in-system programmability for configuration and board-level updates. A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a flexible interconnect structure. CPLDs occupy the practical middle ground between simple programmable logic devices and larger FPGAs. The LC4032ZC-5T48C therefore provides a compact implementation path for deterministic glue logic, control logic, interface adaptation, and system-level conditional functions. The principal device attributes include 32 macrocells, two logic blocks, 32 available I/O pins, a 1.7 V to 1.9 V internal supply range, and a 5 ns propagation-delay grade. Its 48-pin TQFP package measures 7 mm by 7 mm according to the product listing. In-system programmability allows a programmed design to be updated without removing the device, provided the board supplies the required programming interface and power sequencing. The ispMACH 4000Z architecture is intended for high-density programmable logic applications where a relatively small logic count and straightforward deterministic behavior are important. The -5 suffix identifies the 5 ns speed grade, while the ZC portion places the device in the 4000Z family. The device can operate from 3.3 V, 2.5 V, or 1.8 V supply arrangements as described in the family documentation, while the product listing identifies a 1.8 V operating specification for this exact orderable device. Typical uses include industrial control, communications infrastructure, peripheral interfacing, boot and sequencing logic, data acquisition, and embedded system support functions. The combination of 32 I/O pins and a compact 48-TQFP footprint can reduce the number of separate logic devices needed for modest but interconnected control requirements. Design engineers should also account for programming voltage, I/O standards, timing constraints, and unused-pin treatment. For PCB implementation, place the device according to the exact package drawing in the Lattice datasheet and route programming and configuration signals away from high-speed nets. Validate all timing paths against the selected 5 ns speed grade and ensure that unused inputs are terminated in a defined state. The exposed package perimeter provides easy assembly inspection, although land-pattern and solder-reflow details remain critical to manufacturing yield. This product page combines the device architecture, pin-compatible family options, application guidance, and engineering-focused comparison information. It also organizes sourcing questions around the XAIPART Request a Quote form, helping buyers evaluate lifecycle, availability, and exact MPN requirements without relying on generic CPLD selection assumptions.

RFQ İletişim
LC4032ZC-5T48I - 5 ns 32-MC CPLD | Lattice Semiconductor
LC4032ZC-5T48I

LC4032ZC-5T48I - 5 ns 32-MC CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4032ZC-5T48I is an in-system-programmable SuperFAST CPLD with 32 macrocells, a 5 ns speed grade, 32 user I/Os, and a 48-LQFP package. It operates across 1.8 V, 2.5 V, and 3.3 V supply choices, supports a maximum operating frequency of 400 MHz, and provides a 4.4 ns propagation delay. These characteristics position the device for density, timing, and interface requirements that exceed simple low-complexity PLD designs. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that converts digital logic descriptions into deterministic hardware. The ispMACH 4000 architecture combines programmable logic blocks, programmable interconnect, dedicated global-clock resources, and in-system programmability. Within the broader hierarchy, a CPLD is a programmable logic device, a digital IC, and a semiconductor used to implement glue logic, control functions, interfaces, and compact subsystem logic. Key features include four programmable global-clock pins, support for 1.8 V, 2.5 V, and 3.3 V operation, a 400 MHz maximum operating frequency, and up to 32 user I/Os. The 5 ns speed designation identifies the target propagation-delay class, while the 4.4 ns propagation-delay figure describes the device's stated logic timing. In-system programming allows a programmed configuration to be updated through the device interface without relying on a separate external programming fixture. The LC4032ZC-5T48I is intended for designs requiring a practical balance between logic density, pin count, and predictable timing. Its 32 macrocells provide more integration than basic GAL-type devices, while the dedicated global-clock resources simplify clock distribution across synchronous control logic. Multiple I/O arrangements around the package support parallel data paths, although the exact bank and voltage rules should be checked against the manufacturer's pin-description and electrical tables before PCB implementation. Typical applications include industrial control and instrumentation, communication-interface glue logic, test and measurement equipment, embedded system control, and general-purpose programmable interface logic. The device is particularly useful when a design requires more routing flexibility and deterministic control than a small combinational PLD but does not need the software toolchain and resource structure of an FPGA. The primary PCB consideration is correct voltage-compatible I/O assignment. Use the manufacturer pin-description table to identify power, ground, configuration, clock, and user-I/O functions before routing. Decoupling and signal-integrity practices should follow the datasheet's recommended power-network layout, with short return paths and deliberate handling of configuration pins to prevent unintended programming states. This product record combines device specifications, timing and density information, practical implementation guidance, and a package-matched comparison focused on engineering selection. It is intended to help designers identify the correct Lattice option, plan the footprint and power architecture, and confirm that a candidate replacement preserves the LC4032ZC-5T48I's essential electrical and timing constraints.

RFQ İletişim
LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor
LC4064B-10T44I

LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064B-10T44I is an ispMACH 4000B complex programmable logic device with 64 macrocells, four logic blocks, and a maximum propagation delay of 10 ns in a 44-pin TQFP package. It supports 1.8 V, 2.5 V, and 3.3 V in-system programming and provides 30 user I/O pins for compact programmable control, interface, and glue-logic designs. A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic structures, and user I/O in a single integrated circuit. Within the semiconductor hierarchy, the LC4064B belongs to the complex programmable logic device class, alongside FPGA and CPLD devices used to implement fixed digital functions that can be revised during development or field updates. The ispMACH 4000B architecture provides four logic blocks and 64 macrocells for moderate-density combinational and sequential logic. Its 10 ns speed designation supports interfaces and control functions operating above the timing range of slower legacy PLDs. Thirty I/O pins provide access to external buses, status signals, and control lines while keeping the device in a compact 44-TQFP package measuring 10 mm by 10 mm. Programming support for 1.8 V, 2.5 V, and 3.3 V systems enables integration with contemporary mixed-voltage logic. The manufacturer datasheet identifies the LC4064B-10T44I as an in-system programmable SuperFAST high-density PLD, making it suitable for designs where a small logic array must be updated without replacing the assembled board. Typical uses include industrial control logic, peripheral adapters, legacy bus conditioning, display and instrument interfaces, and compact embedded control systems. The 30 I/O count is particularly useful for bridge functions requiring several data, address, enable, and status signals without moving to a larger programmable-logic package. PCB design should preserve the package power and ground connectivity specified in the manufacturer datasheet and route programming signals away from sensitive clock or data paths. Because the public product information confirms the 44-terminal TQFP outline but does not reproduce the complete pin-description table, use the manufacturer pinout for every board-level assignment. This page combines the device architecture, package information, programming interfaces, pin-compatible family alternatives, comparison criteria, and practical application guidance needed to evaluate the LC4064B-10T44I for an existing programmable-logic design.

RFQ İletişim