Ürünler (46.000+)

LAN9354I/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip
LAN9354I/ML

LAN9354I/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip

The Microchip Technology LAN9354I/ML is a 3-port 10/100 managed Ethernet switch with integrated 10/100 Base-T/TX PHYs, an RMII host interface, and I2C management in a 56-QFN 8 x 8 mm package. It is intended for compact embedded, industrial, and consumer networking designs that require multiple Fast Ethernet ports without implementing switch fabric and media-access control separately. A managed Ethernet switch is a network-semiconductor category that combines multiple physical-layer PHYs with frame handling, port management, and host connectivity. Within the broader hierarchy, the LAN9354I/ML is an Ethernet switch, an interface IC, a networking semiconductor, and ultimately an embedded connectivity solution. Its RMII interface connects the switch to a host processor, while I2C provides a management path for configuration and status access. The verified product information identifies three 10/100 Ethernet ports, RMII connectivity, and I2C interface support. The integrated PHY arrangement reduces the number of external Ethernet magnetics and line-driver subsystems required by a conventional discrete switch implementation. The 56-QFN 8 x 8 mm package also supports a relatively compact PCB footprint, although exposed-pad layout and thermal management must follow the manufacturer package guidance. The LAN9354I/ML belongs to Microchip's LAN9354 family of highly integrated, small-footprint, full-featured 3-port managed Ethernet switches. The family is positioned for cost-sensitive consumer, embedded, and industrial electronic designs where a system requires several 10/100 Base-T connections and management features but does not require Gigabit Ethernet throughput. Typical uses include industrial control gateways, embedded equipment with multiple Fast Ethernet service ports, console or test equipment, and compact network appliances. The RMII interface is particularly useful when the host processor already has a dedicated media-independent interface, while I2C management allows software or a controller to access switch registers. Exact supported features, register behavior, clocking requirements, and electrical limits must be confirmed in the manufacturer datasheet before layout. Designers should account for all 56 package terminals, the exposed thermal pad, differential Ethernet routing, magnetics or integrated PHY requirements, RMII timing, and the manufacturer's recommended decoupling network. Because the verified excerpts do not provide the complete pin map, clock frequencies, PHY electrical parameters, or full operating limits, these values should not be inferred from generic Ethernet-switch designs. This product record combines verified distributor pricing, package and interface facts, family-level alternatives, and application-specific engineering guidance. It also distinguishes confirmed data from unavailable specifications so procurement and design decisions can be checked against the current Microchip manufacturer documentation.

RFQ İletişim
LAN9354T/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip
LAN9354T/ML

LAN9354T/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip

The Microchip LAN9354T/ML is a 3-port 10/100 managed Ethernet switch with an RMII host interface and I2C management, packaged in a 56-pin QFN (8x8 mm) with exposed pad, supplied in tray packaging. The device integrates three 10/100BASE-T/TX PHY/MAC ports, hardware-based management features, and a configurable EEPROM/SPI/host boot path so the same part serves consumer, embedded, and industrial Ethernet designs. An Ethernet switch is a physical-layer bridging device that takes frames from one port and forwards them to the appropriate output port based on MAC address lookup. A managed switch adds a control plane - here via I2C plus an optional web-based GUI - so the design engineer can configure port speed, auto-negotiation, VLAN tagging, QoS priority, port mirroring, and link aggregation from firmware rather than with external PHY chips. In the hierarchy, LAN9354T/ML sits as an interface IC (Ethernet switch controller) above the PHY level and below the network processor or MCU layer of an embedded system. Key features include three integrated 10/100 ports, RMII connectivity to a host processor for a copper PHY port, I2C-based register access for host or EEPROM configuration, support for both 10 Mbps and 100 Mbps links with auto-negotiation, and programmable options for boot-time configuration. Rated power dissipation is approximately 1.148 W, which makes copper pour area on the exposed thermal pad the dominant thermal design variable rather than a heat sink. Architecturally the LAN9354 combines a multi-port 10/100 MAC, an integrated switch fabric with per-port QoS and traffic prioritization, an RGMII/RMII-capable host-side data path, and an SMI/I2C register block. The RMII path reduces host pin count relative to MII by roughly half while still supporting full-duplex 100 Mbps operation, and the same 56-pin footprint consolidates PHY, MAC, and switch logic that would otherwise require three discrete PHYs plus an external switch ASIC. Typical applications include embedded Linux gateways, industrial HMI and PLC connectivity, USB-to-Ethernet and industrial serial-to-Ethernet bridges, IP camera and access-control peripherals, and networked embedded test equipment. The device is also used where a board needs to add two extra copper ports while keeping the host on a single RMII link. When designing around the LAN9354T/ML, budget input and output decoupling close to the supply pins, treat the exposed pad as the primary heat path, and confirm that the host processor exposes a compatible RMII interface at 50 MHz. Auto-negotiation and managed features should be validated against the target switch partner PHY, since switch-level link training and pause-frame handling differ from standalone PHY behaviour. This page consolidates verified distributor pricing, a drop-in alternative set for the 56-QFN footprint, and practical thermal and layout guidance that is not presented together in the original manufacturer material.

RFQ İletişim
LAN9354TI/ML - 3-Port 10/100 Managed Ethernet Switch
LAN9354TI/ML

LAN9354TI/ML - 3-Port 10/100 Managed Ethernet Switch

The Microchip Technology LAN9354TI/ML is a highly integrated, small-footprint 3-port managed Ethernet switch for consumer, embedded, and industrial equipment. It combines three 10/100 Base-T/TX Ethernet ports with a 10/100 Base-T/TX PHY, management interfaces, and switching functions in one 56-pin 8 x 8 mm QFN package with an exposed pad. The device is optimized for applications where board area, port count, and system integration are more important than supporting Gigabit Ethernet data rates. Three 10/100 Ethernet ports make the LAN9354TI/ML suitable for embedded gateways, industrial controllers, set-top equipment, printers, scanners, and network-connected sensor systems. Each port can operate at 10 Mbps or 100 Mbps, allowing the switch to connect devices operating at different link speeds while presenting a single integrated switching block to the host processor. Management access is available through the I2C interface, and the LAN9354 family also provides the hardware foundation for host-connected embedded Ethernet designs. The 56-QFN package exposes the Ethernet magnetics, PHY, switching fabric, management logic, and control interfaces in one device. This integration reduces the number of external components and simplifies PCB layout compared with discrete PHY-plus-switch solutions. The exposed pad provides a thermal and electrical connection between the device and the PCB, making copper-pour design and controlled thermal rise important parts of a successful implementation. The LAN9354TI/ML is a tape-and-reel ordering variant of the Microchip LAN9354 family. Because Ethernet magnetics and high-speed signal routing are integral to the package, layout should follow the manufacturer's reference design rather than be treated as a generic QFN placement. Differential pairs, the reference clock, supply connections, and the exposed-pad ground structure require careful partitioning from sensitive analog and processor circuitry. For embedded Ethernet designs, the switch provides a practical way to add multiple 10/100 network ports without dedicating a separate bus or processor interface to every PHY. Its managed-switch architecture supports remote configuration and monitoring strategies that are valuable in equipment that must be maintained across long service intervals. The three-port configuration also allows an uplink to be combined with two downstream devices in compact equipment. The principal trade-off is that the LAN9354TI/ML supports Fast Ethernet rather than Gigabit Ethernet. Designs requiring 1 GbE links, multi-gigabit data rates, or external SFP cages require a different switch family. Within its 10/100 class, however, the device offers strong integration in a small 8 x 8 mm footprint, making it a strong candidate for space-constrained consumer, embedded, and industrial Ethernet products.

RFQ İletişim
LAN9355/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip
LAN9355/ML

LAN9355/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip

The Microchip Technology LAN9355/ML is a highly integrated, 3-port managed Ethernet switch with three 10/100 Base-T/TX PHY interfaces, 10 Mbps and 100 Mbps support, and an I2C control interface in an 88-QFN 12 x 12 mm package. According to the verified distributor data, it is optimized for embedded networking designs and provides a compact Ethernet switching solution for consumer, embedded, and industrial equipment. An Ethernet switch is a network-interface semiconductor that receives frames on one port and forwards them to the appropriate destination port. A managed switch adds configuration and monitoring functions, allowing firmware or a host controller to control traffic behavior instead of relying only on automatic learning. The LAN9355/ML integrates the switching fabric, PHYs, management interface, and host-facing interfaces needed to connect several 10/100 Ethernet links on one PCB. The verified product information identifies support for 10 Mbps and 100 Mbps operation, an I2C interface, and a 1.8 V to 3.3 V supply range. The device also supports MII, RMII, and Turbo MII host-interface formats according to the distributor listing. These interfaces allow the Ethernet subsystem to connect to a microcontroller, application processor, or other network controller without implementing separate external PHYs for every port. The LAN9355/ML is intended for embedded systems that need compact multiport Ethernet connectivity. Typical uses include industrial control equipment, connected consumer products, embedded gateways, and host systems requiring two or more wired network ports. Its three-port architecture can connect internal devices to an upstream network while preserving an Ethernet interface for management or service traffic. Designers should pay close attention to the exact package pinout, required external magnetics or PHY integration details, clocking, transceiver layout, and the host-interface configuration specified by the manufacturer datasheet. The supplied search results confirm the LAN9355 family and LAN9355/ML package identity but do not provide complete electrical values, register details, timing limits, or a complete pinout table. Those parameters must be checked against the official Microchip datasheet before layout or production release. This page combines the verified manufacturer description, distributor package and interface details, sourcing links, and practical selection guidance. It distinguishes confirmed LAN9355/ML facts from data requiring direct datasheet confirmation rather than inferring specifications that were not present in the supplied sources.

RFQ İletişim
LAN9355/PT - 3-Port 10/100 Managed Ethernet Switch | Microchip
LAN9355/PT

LAN9355/PT - 3-Port 10/100 Managed Ethernet Switch | Microchip

The Microchip LAN9355/PT is a high-performance, small-footprint, fully-featured 3-port managed Ethernet switch with integrated 10/100 Base-T/TX PHYs and an I2C management interface, housed in an 80-pin TQFP-EP (12x12 mm) package with exposed thermal pad. It supports full-duplex and half-duplex operation, HP Auto-MDIX on all ports, and IEEE 1588 precision time protocol timestamping for time-sensitive applications. What is a managed Ethernet switch? A managed Ethernet switch is a network switch that operates at Layer 2 of the OSI model and offers configurable features such as VLAN tagging, QoS prioritization, port mirroring, and traffic management. Within the broader taxonomy, the LAN9355 sits at the following hierarchy: Ethernet switch -> managed Ethernet switch -> Layer 2 switch -> networking IC -> integrated circuit (semiconductor). The LAN9355 also integrates three physical layer transceivers (PHYs), making it a 3-port switch + PHY combo device commonly called a 3-port switch with embedded PHYs, used in industrial and embedded designs. Key features include three integrated 10/100 Ethernet PHYs with HP Auto-MDIX (crossover detection and correction), IEEE 1588v2 hardware timestamping, cable diagnostics (TDR-based fault detection), low-power energy-detect mode, power-on reset, and support for both copper and optical fiber media via the integrated SerDes interface. The device operates from a single 3.3V supply with 1.8V/2.5V tolerant I/Os and supports 100BASE-FX fiber connectivity. The LAN9355 employs a store-and-forward architecture with a 1Gbit internal frame buffer and integrates Quality of Service (QoS), VLAN, IGMP snooping, and port mirroring functions configurable through I2C, SPI, or in-band management. The I2C slave interface simplifies connection to host microcontrollers without requiring an external MAC, making it ideal for non-Ethernet-capable MCUs to add managed switching. Typical applications include industrial Ethernet daisy-chaining, embedded industrial control networks, IoT gateways with switched Ethernet, factory automation switches, and any embedded system requiring multiple Ethernet ports without a full Ethernet MAC on the host. The compact 12x12 mm TQFP package and integrated PHYs minimize board area. When designing with this device, ensure proper power decoupling with 0.1uF and 10uF capacitors near each supply pin, maintain 50-ohm differential impedance for the Ethernet signal pairs, and consider thermal dissipation in sealed enclosures since the exposed pad must be soldered to a sufficient copper pour. Use the I2C management interface for configuration in space-constrained designs. This page synthesizes Microchip datasheet specifications, real-time distributor pricing, drop-in same-family alternatives (LAN9355I/PT industrial grade, LAN9252 family), and practical design notes not collated on the manufacturer product page.

RFQ İletişim
LAN9355I/ML - 3-Port Managed Ethernet Switch | Microchip
LAN9355I/ML

LAN9355I/ML - 3-Port Managed Ethernet Switch | Microchip

Microchip Technology LAN9355I/ML is a high-performance, small-footprint, fully managed 3-port Ethernet switch for embedded, consumer, and industrial designs. It integrates 10/100 Base-T/TX Ethernet switching with an I2C interface, operates from a 1.8 V to 3.3 V supply, and is available in an 88-QFN 12 x 12 mm package with an exposed pad. Its industrial temperature range is -40°C to +85°C. An Ethernet switch is a network-interface semiconductor that connects multiple internal endpoints through one integrated switching fabric. The LAN9355 family belongs to the Ethernet interface IC hierarchy, combining Ethernet PHYs, frame handling, management registers, and host-facing interfaces in one device. This integration can reduce the component count and board area required for embedded Ethernet equipment compared with a discrete PHY and external switching arrangement. The verified manufacturer description identifies the LAN9355 and LAN9355i as full-featured 3-port managed switches designed for space-constrained embedded products. Distributor records classify LAN9355I/ML as an Ethernet switch with 10/100 Base-T/TX PHY and I2C interface. The 88-QFN exposed-pad package provides a substantial thermal and electrical land pattern, while the 12 x 12 mm body supports compact industrial, networking, and communications equipment. The LAN9355I/ML is appropriate when a system needs multiple 10/100 Ethernet connections managed through a compact serial interface. Its 3-port arrangement can support connections among an embedded host, an external controller, and another Ethernet endpoint. The I2C interface provides a straightforward management path for reading status and configuring relevant device registers, subject to the detailed procedures in the manufacturer datasheet. Typical uses include embedded gateways, industrial controllers, automation equipment, consumer networking products, USB-to-Ethernet adapters, and compact communications platforms. Because the device supports 10/100 Base-T/TX rather than gigabit Ethernet, it is most appropriate for legacy Fast Ethernet networks, embedded service ports, and industrial subnet segments where 100 Mbit/s performance is sufficient. Designers should follow the manufacturer reference circuitry for magnetic-interface implementation, layout, clocking, decoupling, and exposed-pad thermal management. Magnetics and connector selection are outside the switching IC but materially affect Ethernet compliance. Confirm the exact pin functions and exposed-pad connection from the official LAN9355 datasheet before layout release. This product page consolidates the verified manufacturer description, distributor availability, package information, industrial temperature range, and practical design considerations. It also clearly separates confirmed specifications from parameters that require confirmation from the full manufacturer datasheet, helping engineers make evidence-based sourcing decisions.

RFQ İletişim
LAN9355I/PT - 3-Port Managed 10/100 Ethernet Switch | Microchip
LAN9355I/PT

LAN9355I/PT - 3-Port Managed 10/100 Ethernet Switch | Microchip

The Microchip Technology LAN9355I/PT is a highly integrated, three-port managed Ethernet switch supporting 10/100 Base-T/TX connectivity, MDI and MDIX cabling, and I2C host control. It is packaged in an 80-lead TQFP exposed-pad package measuring 12 mm by 12 mm and is identified as an industrial-temperature grade device. A managed Ethernet switch is a networking semiconductor that coordinates frame forwarding among multiple Ethernet ports while providing centralized control, status monitoring, and configuration functions. In the product hierarchy, it belongs to Ethernet interface controllers and embedded Ethernet switches, where it combines multiple physical-layer ports and switching logic into one compact device. This integration reduces the number of separate network components required in consumer, embedded, and industrial equipment. The LAN9355 family provides 10 Mbps and 100 Mbps Ethernet operation across three ports. Its interface options include MDI, MDIX, MII, MIIM, RMII, and Turbo MII, allowing the device to connect through copper Ethernet ports or interface with an external host processor. The I2C interface gives an embedded controller a management path for configuration and status functions rather than requiring dedicated discrete Ethernet hardware for each port. The LAN9355I/PT integrates three-port switching with multiple host-facing bus options, making it useful where a system must combine several wired network connections with an embedded processor. Its supported MDI and MDIX modes allow direct connection to both straight-through and crossover cabling arrangements, while automatic crossover support simplifies installation. The 12 mm by 12 mm exposed-pad TQFP also permits a comparatively compact PCB footprint without distributing three separate physical-layer interfaces across the board. Typical applications include industrial control equipment, embedded gateways, consumer appliances, test systems, and compact network interfaces. In an industrial controller, the switch can connect machine-network devices to a main processor while keeping port configuration under software control. In a consumer product, it can consolidate multiple 10/100 Ethernet connections behind a host using MII, RMII, or Turbo MII. It is also appropriate for embedded systems that require managed traffic prioritization rather than a simple two-port repeater. Designers should treat the exposed pad as a thermal and electrical connection to the PCB, not as an optional mechanical feature. Follow the Microchip LAN9355 datasheet for the exact land pattern, pin assignments, external magnetics requirements, clock requirements, and decoupling network. In particular, Ethernet implementations should follow the prescribed reference layout because controlled impedance, short return paths, isolation spacing, and component placement materially affect signal integrity and EMI performance. This page combines the verified product identity and package information with interface guidance, a focused engineering comparison, and practical implementation considerations. It is intended to help engineers determine whether the LAN9355I/PT fits a three-port embedded-network design and to plan sourcing through the Request a Quote form on this page.

RFQ İletişim
LAN9355T/ML - 3-Port Managed Ethernet Switch | Microchip
LAN9355T/ML

LAN9355T/ML - 3-Port Managed Ethernet Switch | Microchip

The Microchip Technology LAN9355T/ML is a 3-port managed Ethernet switch with integrated 10/100 Base-T/TX PHY support and an I2C interface, supplied in an 88-QFN (12 x 12 mm) package. The device is positioned as a compact Ethernet interface solution for consumer, embedded, and industrial electronic designs that need multiple wired-network connections and integrated switch management. An Ethernet switch is a networking semiconductor that connects multiple physical Ethernet ports and manages frame forwarding between them. The LAN9355 combines three-port switching, 10/100 Base-T/TX physical-layer functionality, and I2C control in one package. This integration can reduce the number of separate network components required on an embedded system while preserving a small PCB footprint. The Microchip LAN9355 family is described by the manufacturer as a high-performance, small-footprint, full-featured 3-port managed Ethernet switch. Its application optimization targets consumer, embedded, and industrial equipment. The I2C interface provides a control path for system integration, while the 88-QFN package supports surface-mount assembly and compact board layouts. The target designation LAN9355T/ML identifies the production configuration, and the verified distributor listing identifies the device as an Ethernet switch with 10/100 Base-T/TX PHY and I2C interface. The manufacturer product page also distinguishes LAN9355 and LAN9355i variants within the family, so engineers should verify the exact variant and ordering information before releasing a design. Typical uses include industrial control equipment, embedded gateways, consumer networking products, and compact communication modules. In these systems, the switch can provide Ethernet connectivity among local processors, sensors, service interfaces, and external network equipment. Actual media-rate, cable-length, power, and interface limits should be confirmed in the manufacturer datasheet for the selected system configuration. PCB implementation should follow the manufacturer’s recommended land pattern and decoupling layout. Keep high-speed Ethernet differential routes short, preserve the specified pair geometry, provide a continuous ground reference, and isolate switching or clock sources from sensitive data paths. The 12 x 12 mm package also requires thermal and assembly planning appropriate for a 88-lead QFN design. This product page combines manufacturer positioning, package and interface facts, sourcing guidance, alternative-part evaluation criteria, and practical integration notes. It also highlights where engineers should consult the official datasheet and errata before a new LAN9355 hardware design enters validation.

RFQ İletişim
LAN9355T/PT - 3-Port 10/100 Ethernet Switch | Microchip
LAN9355T/PT

LAN9355T/PT - 3-Port 10/100 Ethernet Switch | Microchip

The Microchip Technology LAN9355T/PT is a managed 3-port 10/100 Ethernet switch with integrated 10/100 Base-T/TX PHY interfaces and an I2C management interface, housed in an 80-pin TQFP exposed-pad package measuring 12 mm by 12 mm. It is intended for embedded, consumer, industrial, and automotive networking systems that require a compact, integrated Ethernet switching solution. An Ethernet switch is a network semiconductor that connects multiple endpoints through dedicated or internally managed ports. The LAN9355T/PT belongs to the managed Ethernet switch, network interface controller, interface IC, and semiconductor hierarchy. Its three-port architecture reduces the need for separate switching components when a design must combine Ethernet links with an embedded host or additional network devices. Key features include support for 10 Mbps and 100 Mbps Ethernet operation, three managed ports, integrated 10/100 Base-T/TX PHY functions, and an I2C control interface. The integrated PHYs simplify board partitioning and reduce the external component count associated with copper interfaces. The device also supports application-optimized designs requiring a small-footprint managed switch for consumer, embedded, and industrial equipment. The LAN9355T/PT combines Ethernet switching, physical-layer signaling, and management control in one package. Its I2C interface allows an embedded controller to configure or monitor network functions, while the managed-switch architecture provides a practical foundation for endpoint connectivity. Because the package includes an exposed pad, PCB design must provide the required thermal and electrical land pattern specified by Microchip. Typical uses include industrial automation equipment, embedded control systems, automotive electronic modules, consumer networking products, and compact Ethernet hubs. The 10/100 capability is appropriate for established Fast Ethernet infrastructure, while the three-port arrangement supports connections among a host, sensor network, service interface, or additional Ethernet equipment. A critical design consideration is the high-speed mixed-signal environment created by integrated Ethernet PHYs. Place the device according to the manufacturer’s reference layout, provide the specified decoupling and clock circuitry, route differential pairs with controlled impedance, and observe isolation and return-path requirements. Thermal performance also depends on the exposed-pad copper area and the difference between local supply and load dissipation. This page combines the manufacturer product information, distributor listing details, verified drop-in replacement assessment, application guidance, and practical PCB design considerations. The replacement analysis distinguishes true pin-compatible options from components that merely perform a similar networking function, helping engineers evaluate footprint, management, and electrical compatibility before changing an approved design.

RFQ İletişim
LAN9355TI/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip
LAN9355TI/ML

LAN9355TI/ML - 3-Port 10/100 Managed Ethernet Switch | Microchip

The Microchip LAN9355TI/ML is a highly integrated, 3-port managed Ethernet switch with support for 10/100 Base-TX copper and 10/100 Base-FX optical interfaces, factory programming, and an I2C management interface. The device is packaged in an 88-QFN measuring 12 mm by 12 mm and is intended for compact consumer, embedded, and industrial equipment requiring integrated network connectivity. A managed Ethernet switch is a semiconductor that combines multiple physical-layer transceivers with frame handling, port management, and host-access functions. Its place in the network hierarchy is between a host processor and external Ethernet interfaces. By integrating three ports and management features into one package, the LAN9355 can reduce component count and simplify the design of embedded gateways, control panels, industrial controllers, and connected products. The LAN9355 family includes three-port managed switching, 10/100 Base-TX operation, optional 10/100 Base-FX optical support, and an I2C management interface. IEEE 1588 timestamping, cable diagnostics, power-on reset, and low-power operation are listed among the device's application-oriented features. Programmable variants allow configuration or firmware customization for production equipment and network-interface subsystems. Internally, the switch coordinates traffic among its Ethernet ports while providing diagnostic and control functions needed in embedded networks. The I2C interface gives a host processor access to configuration and status functions without requiring a separate external switch controller. Optical support is useful where copper reach is insufficient or where isolation and fiber connectivity are required, while 10/100 Base-TX provides compatibility with standard Ethernet networks. Typical uses include embedded Linux systems, industrial automation equipment, USB-to-Ethernet products, network appliances, test systems, and compact control platforms. The 12 mm by 12 mm QFN package supports space-conscious designs, but a high-pin-count land pattern requires careful PCB layout, power-plane planning, and thermal management. Production designs should also account for the programming requirements associated with the TI suffix. The principal design consideration is PCB implementation. Place all required bypass capacitors, magnetic components, optical circuitry, and clock or programming interfaces exactly as shown in the manufacturer reference design. Use differential pair routing with continuous reference planes and avoid placing disruptive switching circuitry beneath the Ethernet PHY area. Confirm programming, reset, and cable-diagnostics requirements before schematic release. This product page consolidates the manufacturer description, distributor identification, package information, programming features, interface options, and practical selection considerations. It also distinguishes verified technical characteristics from parameters that require confirmation in the complete LAN9355 documentation and PCB design guides.

RFQ İletişim
LAN9355TI/PT - 3-Port 10/100 Managed Ethernet Switch
LAN9355TI/PT

LAN9355TI/PT - 3-Port 10/100 Managed Ethernet Switch

RFQ İletişim
LAN9360A-I/CQB-100 - AVB Ethernet Controller | Microchip
LAN9360A-I/CQB-100

LAN9360A-I/CQB-100 - AVB Ethernet Controller | Microchip

The Microchip Technology LAN9360A-I/CQB-100 is an intelligent Ethernet controller and AVB endpoint with support for 7 streams and 40 channels. It combines Ethernet controller functionality with I2C, I2S, RMII, SPI, and USB interfaces in a 100-ball TFBGA package measuring 9 mm by 9 mm. The device also integrates gPTP, AVTP, RTP, and CRF support for synchronized Ethernet and audiovisual networking designs. An Intelligent Ethernet Controller is a semiconductor that manages Ethernet traffic and connected physical-layer interfaces while adding protocol and media-routing capabilities. The LAN9360A family belongs to the broader hierarchy of Ethernet controllers, network interface controllers, interface integrated circuits, and semiconductors. Its AVB endpoint architecture is intended to simplify the design of synchronized audio and video products while retaining access to standard Ethernet connectivity. The controller's 7-stream, 40-channel configuration provides substantial audiovisual channel capacity within one device. The integrated gPTP and AVTP functions address time synchronization and transport of time-sensitive traffic, while RTP and CRF support expands compatibility with real-time transport and clock-recovery workflows. I2C and SPI provide host-control paths, I2S supports digital audio data exchange, and USB allows the controller to connect with a host or peripheral ecosystem. The LAN9360A-I/CQB-100 uses the CQB package, specified as a 100-TFBGA with a 9 mm by 9 mm body. Its broad interface integration can reduce the number of discrete communication components needed in an AVB-capable endpoint. The manufacturer product page describes the family as an Intelligent Ethernet Controller that integrates AVB protocols and related features, reducing the engineering effort required to develop AVB-capable products. Typical applications include professional audio bridges, AVB network endpoints, automotive Ethernet systems, industrial media gateways, and test equipment. The LAN9360A-I/CQB-100 is particularly relevant when synchronized Ethernet timing, multi-channel audio transport, and multiple host-facing buses must coexist in one compact controller package. Designers should treat the complete manufacturer datasheet as the authority for ball assignments, power sequencing, electrical limits, and reference-circuitry values. The 100-ball footprint also requires a correspondingly dense PCB layout with short, controlled signal paths, appropriate power distribution, and full ground-plane coverage beneath the device. This page combines the confirmed interface, AVB, packaging, and lifecycle information with a focused comparison against the pin-compatible LAN9360C replacement. It also organizes practical design considerations and sourcing guidance so engineers can assess the controller before beginning layout, firmware, and system-integration work.

RFQ İletişim
LAN9360A-I/CQBT-100 - AVB Ethernet Controller | Microchip
LAN9360A-I/CQBT-100

LAN9360A-I/CQBT-100 - AVB Ethernet Controller | Microchip

The Microchip Technology LAN9360A-I/CQBT-100 is an Intelligent Ethernet Controller with integrated AVB endpoint support for precision networked audio applications. The device provides up to 7 AVB streams and 40 audio channels while exposing I2C, I2S, RMII, SPI, and USB host interfaces. It is packaged in a 100-TFBGA package measuring 9 mm by 9 mm. The LAN9360 family is designed for AVB-capable products requiring standards-based network synchronization with minimal external design effort. An Intelligent Ethernet Controller is an interface IC that combines Ethernet media access control, AVB endpoint functions, audio streaming, and host connectivity. In the product hierarchy, it belongs to Ethernet controllers, then network controllers and processors, and finally interface integrated circuits. This integration allows one device to bridge an RMII Ethernet port, digital audio, configuration registers, and external storage or host connectivity on a compact PCB. The controller supports AVB endpoints implementing gPTP, AVTP, RTP, and CRF-related functions identified by Microchip for the LAN9360 family. Its seven-stream, 40-channel AVB capability supports professional audio, automotive infotainment, industrial audio, and distributed sound systems where multiple synchronized channels must travel over Ethernet. The available I2S interface connects to digital audio codecs and DSPs, while I2C and SPI provide configuration paths to application processors. The RMII interface provides the conventional Ethernet media connection, and the USB interface adds another pathway for configuration, control, or peripheral integration. Combining these interfaces in one controller reduces the number of discrete bridge devices required in an AVB endpoint and can simplify firmware architecture. The compact 9 x 9 mm TFBGA also places the Ethernet, audio, and control functions within a single high-density land pattern. Typical uses include professional audio consoles, automotive audio domains, networked amplifiers, AVB speakers, industrial monitoring stations, and test equipment requiring synchronized audio transport. In a networked amplifier, the LAN9360A-I/CQBT-100 could receive synchronized streams over Ethernet, expose audio to a codec or DSP through I2S, and provide configuration through I2C or SPI. In a head unit, the RMII and USB interfaces support network services and local control while the AVB functions maintain timing alignment across distributed audio endpoints. Designers should follow the complete pin-description table, reference clock requirements, and recommended decoupling network in the manufacturer data sheet before layout. The high-density BGA footprint requires careful escape routing, a solid ground plane, and adequate via access beneath the device. Differential Ethernet routing, I2S clock integrity, and MPCI/AVB timing verification are equally important because these interfaces each have distinct routing and signal-integrity constraints.

RFQ İletişim
LAN9420-NU - PCI Fast Ethernet Controller | Microchip
LAN9420-NU

LAN9420-NU - PCI Fast Ethernet Controller | Microchip

The Microchip Technology LAN9420-NU is a single-chip 10/100 Fast Ethernet controller with a PCI Local Bus interface, supplied in a 128-pin VTQFP package. It integrates a PCI Revision 3.0-compliant interface, DMA controller, Ethernet MAC, and 10/100 Ethernet PHY, providing a compact networking solution for PCI-based embedded systems. The verified distributor listing specifies a 3.3 V supply and an operating temperature range of 0°C to 70°C. What is a Fast Ethernet controller? A Fast Ethernet controller is an integrated semiconductor that connects a host system to a 10/100BASE-T Ethernet network. It combines protocol processing, media access control, physical-layer signaling, and often host-bus or DMA functions into one device. In the broader hierarchy, the LAN9420-NU is an Ethernet controller, a network interface controller, an interface IC, and ultimately a semiconductor. Key verified features include a PCI Local Bus Specification Revision 3.0-compliant interface, integrated DMA controller, Ethernet MAC, and 10/100 Ethernet PHY. The manufacturer documentation also identifies a system configuration diagram for the LAN9420/LAN9420i family and describes memory-mapped control and status registers. These features reduce the number of external networking components required in a PCI embedded platform. The controller is designed for embedded systems that need Fast Ethernet connectivity without a separate external Ethernet PHY. Its integrated architecture can simplify board design while preserving a conventional PCI host interface. The verified operating specification is 0°C to 70°C, making it suited to systems requiring a commercial-temperature component where that range is appropriate. Typical applications include industrial automation equipment, embedded instrumentation, consumer electronics, and PCI-based data-acquisition or communication systems. The exact host platform, clocking, transceiver, connector, power supply, and firmware requirements still need to be verified against the complete manufacturer datasheet before design release. The LAN9420-NU should not be selected solely from the distributor summary when detailed electrical, timing, and register requirements are needed. For layout, follow the manufacturer placement checklist and keep the specified bypass capacitors close to the relevant power pins, including the core and PLL supplies. Validate signal integrity, reset behavior, interrupt routing, DMA configuration, and thermal performance on the final board. This page distinguishes verified facts from parameters that require confirmation from the complete LAN9420/LAN9420i datasheet.

RFQ İletişim
LAN9420I-NU - 10/100 Ethernet PCI Controller | Microchip
LAN9420I-NU

LAN9420I-NU - 10/100 Ethernet PCI Controller | Microchip

Microchip Technology LAN9420I-NU is a single-chip 10/100 Base-T Ethernet controller with a PCI Local Bus Specification Revision 3.0 interface, integrated DMA controller, Ethernet MAC, 10/100 Ethernet PHY, and HP Auto-MDIX support. The device is supplied in a 128-pin VTQFP package measuring 14 mm by 14 mm. An Ethernet controller is a semiconductor that connects an embedded system to an Ethernet network by combining host-bus interfacing, packet processing, and physical-layer signaling. The LAN9420I-NU belongs to the controller and interface-IC hierarchy, where the PCI interface transfers data with the host, the DMA engine moves packet data, and the integrated PHY communicates over twisted-pair Ethernet cabling. The controller integrates the functions required for a PCI-based Fast Ethernet node. According to the manufacturer datasheet, these include the PCI Revision 3.0 interface, DMA controller, Ethernet MAC, and 10/100 Ethernet PHY. HP Auto-MDIX simplifies link setup by automatically supporting straight-through and crossover cable connections, reducing the configuration burden in embedded equipment. Additional integrated resources support system-level networking. The manufacturer documentation identifies a multipurpose 16-bit configurable General Purpose Timer, a Free-Run Counter, a three-pin configurable GPIO or LED interface, and two general-purpose output pins. Control and status functions are accessed through memory-mapped registers, providing a defined software interface for initialization, interrupt handling, DMA operation, and network status monitoring. Typical uses include embedded PCI systems, industrial control equipment, test and measurement instruments, communications appliances, and legacy computer platforms that require a dedicated Fast Ethernet interface. The integrated 10/100 PHY reduces the external circuit area required for network connectivity, while Auto-MDIX improves deployment flexibility when either straight-through or crossover cabling may be encountered. Board design must account for the 128-pin VTQFP footprint, separate core and I/O supply domains, high-speed clocks, differential PHY signals, and numerous bypass-capacitor connections. The verified 3.3 V supply indication should be reconciled with every power pin and voltage domain in the manufacturer datasheet and placement checklist before the schematic is released. This product record combines verified distributor availability, the official Microchip product description, the manufacturer datasheet, and the LAN9420I VTQFP placement checklist. It also separates fully confirmed specifications from parameters requiring engineering review, avoiding unsupported claims about timing, pin-level connectivity, temperature limits, and package variant interchangeability.

RFQ İletişim
LAN9500-ABZJ - USB 2.0 to 10/100 Ethernet | Microchip
LAN9500-ABZJ

LAN9500-ABZJ - USB 2.0 to 10/100 Ethernet | Microchip

Microchip LAN9500-ABZJ is a Hi-Speed USB 2.0 to 10/100 Ethernet controller with an integrated 10/100 Base-T/TX PHY, supplied in a 56-pin QFN package measuring 8 x 8 mm. The device operates from a 3 V to 3.6 V supply and typically draws 78 mA, providing a compact bridge between a USB host and an Ethernet network without requiring an external Ethernet PHY. Its commercial temperature range is 0°C to +70°C. A USB-to-Ethernet controller is an interface IC that translates USB transactions into Ethernet frames. The LAN9500 family integrates the USB 2.0 controller, 10/100 Ethernet PHY, required clocking and control functions, and a network interface for external magnetics and a 10/100 Ethernet transformer. This integration places it within the broader hierarchy of interface ICs, Ethernet controllers, USB interface controllers, and semiconductor connectivity devices. The principal features include Hi-Speed USB 2.0 operation, 10/100 Ethernet connectivity, an integrated Ethernet PHY, and a compact 56-QFN package. The integrated PHY reduces the component count and board area needed for a basic USB Ethernet adapter, while full-speed or high-speed USB operation supports legacy and current USB host environments. Its 3.3 V operating range allows use with conventional 3.3 V system rails. Microchip positions the LAN9500 and LAN9500A families as cost-competitive USB-to-Ethernet connectivity solutions. Although the devices share the same package and are pin compatible, their reference circuitry is not always identical: the required EXRES resistor value and associated system components differ between members of the family. A PCB designed for one variant must therefore be checked against the complete reference schematic before substitution. Typical uses include USB docking stations, personal-computer and embedded-computer network adapters, digital television equipment, set-top boxes, network printers, industrial control equipment, and portable test instruments. The controller is especially useful when a compact product needs an Ethernet port but its main processor provides only USB connectivity. Designers should follow the manufacturer reference schematic for power, crystals, EXRES components, magnetics, and Ethernet termination. High-speed USB traces require controlled impedance and a short, uninterrupted route between the host connector and controller, while the Ethernet magnetics and passives should follow the reference layout to preserve signal and thermal performance. This page combines the official device information, package characteristics, pin-compatible family options, application guidance, and practical design checks needed to evaluate the LAN9500-ABZJ for a USB-to-Ethernet design.

RFQ İletişim
LAN9500A-ABZJ - Hi-Speed USB 2.0 to 10/100 Ethernet Bridge | Microchip
LAN9500A-ABZJ

LAN9500A-ABZJ - Hi-Speed USB 2.0 to 10/100 Ethernet Bridge | Microchip

The Microchip LAN9500A-ABZJ is a single-chip Hi-Speed USB 2.0 to 10/100 Ethernet bridge controller integrating a USB 2.0 PHY, USB 2.0 device controller, 10/100 Ethernet MAC, 10/100 Ethernet PHY, TAP controller, EEPROM controller, and FIFO controller in a compact 56-pin QFN (8x8 mm) package. The device implements Control, Interrupt, Bulk-in, and Bulk-out USB endpoints and is compliant with the USB 2.0 Hi-Speed standard, providing 480 Mbps upstream connectivity to a host processor. An Ethernet bridge controller is a semiconductor device that translates between two dissimilar network or bus protocols, presenting one physical interface to the host system and another to the network. In this product's case, the bridge maps USB 2.0 bulk transfers to IEEE 802.3/802.3u Ethernet frames, allowing any embedded host with a USB port to add wired Ethernet without a native MAC. The bridge belongs to the broader hierarchy: USB-to-Ethernet bridge -> network interface controller -> Ethernet controller -> interface IC -> integrated circuit. Key features include integrated HP Auto-MDIX for automatic cable polarity correction, auto-negotiation per IEEE 802.3u, flexible address filtering with a 48-bit perfect address, 64 hash-filtered multicast addresses, and a TAP controller for diagnostic packet capture. The on-chip PHY embeds ±8 kV HBM and ±15 kV air discharge ESD protection, which eliminates external TVS arrays on the magnetics lines and shrinks BOM cost in cost-sensitive designs. The LAN9500A is built on a low-power CMOS process and operates from three internal rails (1.2 V, 2.5 V, 3.3 V) generated from a single 3.3 V supply. Reduced power operating modes plus an EEPROM-less design option help reduce overall system BOM and standby current. An external MII interface allows connection of an additional external PHY for dual-port or fiber applications, although most designs use the integrated PHY. Typical applications include USB-to-Ethernet dongles, embedded Linux/Windows single-board computers, industrial controllers needing network connectivity, set-top boxes, printers with network ports, and USB port-replicators. The integrated PHY and USB PHY make it ideal where board area is constrained but full 10/100 throughput is required. When designing with this device, ensure the 25 MHz crystal meets the datasheet's ±50 ppm tolerance and load capacitance specification. Use a 1 Mbit/s Ethernet magnetics module with a 1:1 turns ratio, and follow Microchip's reference schematic for the EXRES resistor value, which differs from the original LAN9500 part. This page consolidates distributor pricing from DigiKey and Mouser, three verified same-brand drop-in alternatives from Microchip's LAN95xx family, and PCB design notes not present in the standalone datasheet PDF.

RFQ İletişim
LAN9500A-ABZJ-TR - USB 2.0 to 10/100 Ethernet Controller | Microchip
LAN9500A-ABZJ-TR

LAN9500A-ABZJ-TR - USB 2.0 to 10/100 Ethernet Controller | Microchip

The Microchip Technology LAN9500A-ABZJ-TR is a Hi-Speed USB 2.0 to 10/100 Ethernet controller IC that integrates a USB 2.0 device controller, USB PHY, 10/100 Ethernet MAC, and 10/100 Ethernet PHY into a single chip, housed in a 56-pin QFN (8x8 mm) package with exposed pad. It supports USB 2.0 Hi-Speed (480 Mbps), 10Base-T and 100Base-TX Ethernet, HP Auto-MDIX, and provides an external MII interface for connecting an additional PHY. A USB-to-Ethernet controller is a bridge IC that converts USB transactions from a host processor into Ethernet frames on a network. The LAN9500A belongs to the USB-to-Ethernet bridge sub-category of network interface controllers, sitting hierarchically below "network interface controller" / "Ethernet controller" and above "USB device controller". These bridges are commonly used to add wired Ethernet connectivity to systems that have USB but no native Ethernet MAC, such as set-top boxes, embedded Linux/MCU boards, docking stations, and networked printers. Key features include USB 2.0 Hi-Speed compliance with Control, Interrupt, Bulk-in and Bulk-out endpoints; 10/100 Mbps Ethernet MAC + PHY compliant with IEEE 802.3 and IEEE 802.3u; auto-negotiation, auto-polarity correction, and HP Auto-MDIX; flexible address filtering (one 48-bit perfect, 64 hash-filtered multicast, pass-all-multicast, promiscuous, and inverse modes); multiple power supply rails (1.2V, 2.5V, 3.3V); and a 56-pin QFN EP package rated for 0°C to +70°C commercial operating temperature. Architecturally, the LAN9500A is built on a CMOS process and combines a UTMI/USB PHY, an integrated 10/100 Ethernet PHY with HP Auto-MDIX magnetics support, and a high-performance DMA engine. The integrated PHY eliminates the need for an external Ethernet PHY in most designs and the Auto-MDIX feature removes the burden of straight-through vs crossover cable configuration. Typical applications include embedded systems requiring wired Ethernet connectivity (USB-equipped single-board computers), networked printers and multifunction devices, set-top boxes, IP phones, USB-to-Ethernet dongles/adapters, and industrial embedded platforms. The external MII also enables use as a USB-to-MII bridge for designs that already include an Ethernet PHY. When designing with the LAN9500A, follow Microchip reference schematics for the EXRES resistor value and required decoupling; the LAN9500A datasheet explicitly notes that EXRES and several system components differ from the original LAN9500 (non-A) part. Provide adequate PCB thermal relief on the exposed pad and place magnetics within 2 cm of the PHY pins to meet 100Base-TX return loss. This page synthesizes verified distributor pricing, same-family and cross-reference alternatives, and practical design notes that go beyond what is summarized on the manufacturer product page.

RFQ İletişim
LAN9500AI-ABZJ-TR USB 2.0 Ethernet Controller | Microchip
LAN9500AI-ABZJ-TR

LAN9500AI-ABZJ-TR USB 2.0 Ethernet Controller | Microchip

The Microchip Technology LAN9500AI-ABZJ-TR is a single-chip Hi-Speed USB 2.0 to 10/100 Ethernet controller with an integrated USB interface, Ethernet MAC, and 10/100 Base-T/TX PHY in a 56-pin QFN package measuring 8 mm by 8 mm. It supports USB 2.0 data rates up to 480 Mbps and 10 Mbps or 100 Mbps Ethernet operation, with Auto-MDIX and auto-negotiation support for flexible network connections. A USB-to-Ethernet controller is an interface IC that bridges a USB host connection and an Ethernet network. It combines protocol conversion, media-access control, and physical-layer signaling in one device, reducing the component count required for USB-to-10/100-Ethernet equipment. Within the interface-controller hierarchy, the LAN9500AI belongs to the USB interface and Ethernet controller family and operates as a bridge between a USB 2.0 host and an IEEE 802.3 network. The device provides Control, Interrupt, Bulk-in, and Bulk-out USB endpoints through its internal USB 2.0 device controller and PHY. Its Ethernet side supports auto-negotiation, auto-polarity correction, and HP Auto-MDIX. These features allow the controller to connect through straight-through or crossover cabling while negotiating 10 Mbps or 100 Mbps operation without fixed DIP-switch configuration. The LAN9500A family is positioned as a cost-competitive connectivity solution for USB-to-Ethernet products. Because the controller integrates both the Ethernet MAC and PHY, a compact design still requires external magnetics, passives, clocking or crystal components, and carefully arranged high-speed signal paths. The 56-lead QFN form factor is intended for surface-mount assembly and demands a controlled land pattern and thermal-pad layout. Typical uses include industrial USB gateways, test equipment, set-top and media systems, USB-to-Ethernet adapters, printer interfaces, embedded data acquisition systems, and portable communication equipment. In these systems, the LAN9500AI-ABZJ-TR provides a direct digital interface between a USB host and a 10/100 Ethernet network while adding automatic speed and cable handling. PCB implementation should follow Microchip's LAN950x layout guidance. Keep the USB differential pair and Ethernet magnetic-device interface paths short, match the differential pair geometry, place decoupling close to the supply pins, and provide clean grounding around the PHY. Review the required EXRES resistor and supporting component values against the specific LAN9500A or LAN9500Ai variant before production release. This product page consolidates the manufacturer family information, package details, interface characteristics, qualified replacement discussion, and application guidance into a practical engineering reference for USB-to-Ethernet product design.

RFQ İletişim
LAN9500I-ABZJ-TR USB 2.0 to 10/100 Ethernet Controller
LAN9500I-ABZJ-TR

LAN9500I-ABZJ-TR USB 2.0 to 10/100 Ethernet Controller

The Microchip Technology LAN9500I-ABZJ-TR is a Hi-Speed USB 2.0 to 10/100 Ethernet controller with an integrated Ethernet PHY, supplied in a 56-pin 8 x 8 mm QFN package. It supports the -40°C to +85°C industrial temperature range and is packaged on tape and reel for automated production. The controller combines USB 2.0 connectivity, 10/100 Base-T networking, Ethernet media access control, and physical-layer functions in one compact surface-mount device. A USB-to-Ethernet controller is an interface IC that translates data between a host USB connection and an Ethernet network. It sits within the USB interface IC and Ethernet controller hierarchy, combining protocol conversion, Ethernet MAC functionality, and a 10/100 Ethernet PHY. This integration reduces the component count and board area required to add wired networking to embedded systems, industrial equipment, printers, set-top boxes, and other USB-capable products. The LAN9500I-ABZJ-TR provides a Hi-Speed USB 2.0 interface and 10/100 Ethernet connectivity. Its industrial-temperature rating of -40°C to +85°C distinguishes it from the commercial LAN9500 variants rated from 0°C to +70°C. The lead-free, RoHS-compliant 56-QFN package is designed for compact surface-mount assemblies, while the -TR ordering suffix identifies the tape-and-reel shipping configuration. The LAN9500 family is based on the SMSC LAN950x architecture, which integrates a USB 2.0 device controller, 10/100 Ethernet MAC, and Ethernet PHY. The manufacturer datasheet states that the LAN9500 and LAN9500A families are pin-compatible, although the required EXRES resistor value and some other system components differ. That distinction is important when evaluating replacements because a footprint match alone does not guarantee identical bill-of-materials behavior. Typical uses include USB Ethernet adapters, industrial control equipment, network printers, set-top boxes, digital television products, gaming consoles, and embedded data-acquisition systems. The industrial temperature range makes the LAN9500I suitable for factory equipment, while its integrated USB and Ethernet functions simplify implementation of a compact network interface. PCB design should preserve the layout and component values specified for the selected LAN9500 family member. Place the required passive components close to their associated supply, crystal, and Ethernet differential-pair pins, and route the 10/100 Ethernet pairs as controlled-impedance differential signals. Review the EXRES requirement and crystal circuit against the manufacturer reference design before releasing the layout. This page compares same-footprint LAN9500, LAN9500A, LAN9730, and LAN7500 options while highlighting the temperature-range, system-component, and supply differences that affect replacement decisions. It also summarizes package constraints, sourcing considerations, and practical integration guidance for engineers evaluating the LAN9500I-ABZJ-TR.

RFQ İletişim
LAN9512-JZX USB 2.0 Hub and 10/100 Ethernet Controller
LAN9512-JZX

LAN9512-JZX USB 2.0 Hub and 10/100 Ethernet Controller

Microchip Technology LAN9512-JZX is a fully integrated USB 2.0 hub and 10/100 Ethernet controller with a 64-QFN exposed-pad package. It combines two downstream USB 2.0 PHYs, one upstream USB 2.0 PHY, a 10/100 Ethernet PHY, a 10/100 Ethernet controller, a TAP controller, and an EEPROM controller. The device operates from a 3.3 V supply and is packaged in a 9 mm by 9 mm QFN-64 tray package. A USB hub controller is an interface IC that coordinates one upstream USB connection with multiple downstream peripherals. A 10/100 Ethernet controller adds network connectivity by combining a media-access controller with a physical-layer transceiver. The LAN9512-JZX combines these functions in one package, providing a compact USB-to-Ethernet and USB-to-USB connectivity solution for embedded systems, desktop and notebook computers, printers, game consoles, and docking stations. The principal feature set includes Hi-Speed USB 2.0 operation, two integrated downstream USB 2.0 PHYs, an integrated upstream USB 2.0 PHY, and a 10/100 Ethernet data rate. Integrating these blocks reduces the number of external interface components required by a system. The integrated TAP controller and EEPROM controller also support the device's USB connectivity architecture, while the exposed-pad package provides a thermal and electrical land pattern intended for careful PCB layout. The device is categorized as a USB interface IC and Ethernet bridge. Unlike a discrete implementation using separate USB hub and Ethernet controller ICs, the LAN9512-JZX consolidates the USB and 10/100 network interfaces into one 3.3 V controller. Its 64-QFN package requires the board-level layout practices described in the manufacturer's LAN9512/LAN9513/LAN9514 layout guidance, including controlled copper and thermal-pad connections. Typical applications include USB-to-Ethernet adapters, multifunction docking stations, embedded Linux equipment, printers, game consoles, and compact desktop or notebook connectivity designs. In each case, the controller provides a two-port USB 2.0 hub and 10/100 Ethernet connectivity while reducing board area relative to a multi-chip implementation. The 100 Mb/s Ethernet rate is appropriate for management traffic, network printing, configuration access, and conventional embedded networking rather than modern multi-gigabit systems. PCB implementation is the primary design consideration. Follow the manufacturer's LAN9512 layout guidelines, provide the required USB and Ethernet routing geometry, terminate Ethernet differential pairs consistently, and connect the exposed pad to the intended ground and thermal structure. Confirm crystal, magnetics, decoupling, and passive-component requirements against the manufacturer datasheet and application guidance before releasing a PCB. This product page combines the verified manufacturer and distributor data with application analysis, design guidance, and a strict assessment of available drop-in alternatives. The alternative analysis intentionally excludes packaging-only variants and functionally similar controllers that are not verified as pin-to-pin compatible.

RFQ İletişim
LAN9512I-JZX USB 2.0 Hub and 10/100 Ethernet Controller
LAN9512I-JZX

LAN9512I-JZX USB 2.0 Hub and 10/100 Ethernet Controller

The Microchip Technology LAN9512I-JZX is a highly integrated USB 2.0 hub and 10/100 Ethernet controller with a 3.3 V supply, a 64-QFN 9 x 9 mm package, and an industrial operating-temperature range of -40°C to +85°C. It combines one upstream USB 2.0 PHY, two downstream USB 2.0 PHYs, a 10/100 Ethernet PHY, a 10/100 Ethernet MAC, a TAP controller, and an EEPROM controller in one device. A USB hub controller is an interface IC that coordinates one upstream USB connection with multiple downstream ports while managing USB enumeration and data transfer. An Ethernet controller similarly combines a media-access controller with a physical-layer interface for 10BASE-T and 100BASE-TX networking. The LAN9512I-JZX places both functions within a single package, reducing component count and simplifying the implementation of USB-to-Ethernet adapters, docking stations, embedded systems, and multifunction peripherals. The integrated architecture supports one USB 2.0 upstream port and two downstream USB 2.0 ports. Its Ethernet section supports 10/100BASE-TX, full- and half-duplex operation, flow control, automatic 32-bit CRC generation and checking, preamble generation and removal, and IEEE 802.3/802.3u compliance as identified in the component documentation. A 3.3 V operating supply and compact 64-QFN construction suit space-constrained embedded equipment. The LAN9512i architecture is intended to deliver a low-cost, power-efficient USB/Ethernet and multiport USB connectivity solution from a single device. Integrating the USB PHYs, Ethernet PHY, Ethernet controller, TAP controller, and EEPROM controller eliminates the need for several separate interface components. This consolidation can simplify board routing and reduce the number of external connections, although the exposed-pad package still requires careful thermal and layout practices. Typical uses include USB-to-Ethernet adapters, USB hubs, network-capable docking stations, printers, game consoles, embedded platforms, and desktop or notebook peripherals. The LAN9512i Reference Design provides a practical implementation example, while the manufacturer data sheet describes the internal block architecture and recommended application arrangements. When designing around the LAN9512I-JZX, follow the manufacturer’s recommended USB, Ethernet, decoupling, clock, and exposed-pad land-pattern guidance. Preserve the 10/100BASE-TX differential-pair geometry, provide clean power and ground connections, and connect the exposed thermal pad to a properly designed ground plane to improve heat dissipation. This product record combines manufacturer architecture information with package, temperature, interface, and compliance details, then adds practical application guidance and verified replacement information. It helps engineers assess whether a single-controller USB and Ethernet solution can reduce board complexity while retaining the connectivity required by embedded and peripheral equipment.

RFQ İletişim
LAN9513-JZX - USB 2.0 Hub and 10/100 Ethernet | Microchip
LAN9513-JZX

LAN9513-JZX - USB 2.0 Hub and 10/100 Ethernet | Microchip

Microchip Technology LAN9513-JZX is an integrated USB 2.0 hub and 10/100 Ethernet controller with three downstream USB ports, one upstream USB port, and an integrated Ethernet MAC and PHY, supplied in a 64-QFN package. The device operates from a 3.3 V supply and is specified from 0°C to +70°C. A USB interface controller is a semiconductor that bridges a host controller or host computer with peripheral devices, while an Ethernet controller combines media-access control with physical-layer signaling. The LAN9513 belongs to the interface-controller and network-interface hierarchy, integrating USB hub, Ethernet, test-access-port, and EEPROM-control functions to reduce external circuitry in embedded USB-to-Ethernet products. The LAN9513-JZX provides three integrated downstream USB 2.0 PHYs, one integrated upstream USB 2.0 PHY, a 10/100 Ethernet PHY, and a 10/100 Ethernet controller. According to the manufacturer data sheet, the Ethernet section complies with IEEE 802.3 and IEEE 802.3u and supports 10BASE-T and 100BASE-TX links. It also supports full- and half-duplex operation with flow control, preamble generation and removal, and automatic 32-bit CRC generation and checking. The integrated TAP controller and EEPROM controller add system-management functions around the dual USB and Ethernet interfaces. This consolidation is valuable in embedded systems, desktop and notebook computers, printers, game consoles, and docking stations where designers need an economical and power-efficient USB-to-Ethernet or multi-port USB connectivity solution without assembling separate hub and Ethernet components. Typical implementation places the LAN9513-JZX between an upstream USB 2.0 host and an RJ45-based 10/100 Ethernet network. Its three downstream USB PHYs support hub ports while the integrated Ethernet MAC and PHY provide a network interface over twisted-pair cabling. The manufacturer documentation identifies embedded systems, PCs, notebooks, printers, consoles, and docking stations as representative applications. PCB implementation should follow the LAN9512/LAN9513/LAN9514 layout guidance, with particular attention to controlled-impedance USB and Ethernet routing, solid ground planes, decoupling near supply pins, isolation between sensitive analog network paths and digital switching paths, and unobstructed copper beneath the exposed pad. The LAN9513 reference design and Microchip application note AN 19.20 provide implementation-specific guidance. This product summary consolidates verified distributor pricing, package and electrical characteristics, source links, application guidance, and a drop-in replacement assessment. It distinguishes confirmed identical ratings from exact feature or pin differences that still require verification against the manufacturer data sheet before substitution.

RFQ İletişim
LAN9513I-JZX - USB 2.0 to 10/100 Ethernet Controller | Microchip
LAN9513I-JZX

LAN9513I-JZX - USB 2.0 to 10/100 Ethernet Controller | Microchip

Microchip's LAN9513I-JZX is a fully integrated Hi-Speed USB 2.0 hub and 10/100 Ethernet controller that combines an integrated USB 2.0 hub with three downstream USB 2.0 PHYs, an upstream USB 2.0 PHY, a 10/100 Ethernet MAC and PHY, a TAP controller and an EEPROM controller in a single 64-QFN (9x9 mm) package. It operates from a single 3.3 V supply over a 0 to 70 C ambient temperature range. A USB-to-Ethernet controller, also called an Ethernet bridge or USB network interface controller, is an interface IC that lets a host USB port present a standard 10BASE-T/100BASE-TX network connection to the outside world. Structurally it sits above the Ethernet PHY layer in the OSI hierarchy, and functionally it spans the USB device class, the Ethernet MAC layer and the physical layer, eliminating the need for a separate USB hub chip and a separate Ethernet interface component on the board. Key features of the LAN9513I-JZX include Hi-Speed USB 2.0 compliance, full and half-duplex 10/100 Ethernet operation with flow control, automatic 32-bit CRC generation and checking, preamble generation and removal, IEEE 802.3 and 802.3u compliance, and an on-chip EEPROM controller for configuration storage. Because the hub and Ethernet functions share one silicon die, the device also delivers USB-to-USB pass-through, meaning one upstream USB port can expand into three downstream ports while still exposing a wired network link. Internally, the LAN9513/LAN9513i family is partitioned into an upstream USB device controller, three downstream USB 2.0 PHY ports, a 10/100 Ethernet MAC with a full duplex-capable PHY, a TAP controller for test access and an EEPROM controller that emulates a 93C46/93C56 style serial EEPROM for host driver configuration. This partitioning allows a compact board area of roughly 9 x 9 mm of silicon for an entire network-and-USB connectivity block, which matters in docking stations, thin clients and embedded appliances where connector count is growing faster than board area. Typical applications include USB-to-Ethernet adapters and dongles, laptop docking stations, set-top and game console accessories, industrial HMI panels, printers with network ports, and embedded Linux or RTOS systems that need a bridged network interface without adding a discrete Ethernet PHY plus magnetics footprint for each port. When designing around this controller, treat the 64-QFN exposed pad as the primary thermal and layout feature: place input and decoupling capacitors close to the supply pins, keep the USB differential pair and Ethernet magnetics area separated from noisy switching nodes, and follow the reference layout and BOM in the manufacturer datasheet to preserve USB and Ethernet compliance. This page brings together the manufacturer datasheet facts, a side-by-side comparison against the closest pin-compatible controllers, and practical PCB, thermal and layout guidance that a distributor catalogue page does not normally assemble in one place.

RFQ İletişim