LFE3-35EA-7FTN256I
LFE3-35EA-7FTN256I - 33K LUTs ECP3 FPGA, 256-FTBGA | Lattice
The Lattice Semiconductor LFE3-35EA-7FTN256I is a member of the LatticeECP3 (EConomy Plus 3) family of low-power, high-speed Field-Programmable Gate Arrays (FPGAs), integrating 33,000 logic cells (33.3K LUTs) and 133 user I/O in a 256-ball Fine-pitch Thin Ball Grid Array (FTBGA) package. It operates from a 1.2 V core supply, supports SERDES data rates from 150 Mbps to 3.2 Gbps for generic 8b10b / 10-bit SERDES, and uses 65 nm process technology, targeting cost-sensitive high-volume applications that need multi-gigabit serial connectivity without the power and cost of higher-density FPGAs.
A Field-Programmable Gate Array (FPGA) is a semiconductor device whose digital logic fabric, interconnect, and I/O can be reconfigured by the end user after manufacture. Within the broader semiconductor hierarchy, an FPGA is a programmable logic device, sitting alongside CPLDs as the two main categories of user-configurable digital ICs, both of which fall under the larger umbrella of Application-Specific Standard Products (ASSPs) and digital ASICs. The LatticeECP3 family specifically targets bridging, video, and low-cost communication designs, positioning this MPN between small CPLDs and high-end FPGAs such as Xilinx Virtex or Intel (Altera) Stratix families.
Key features of the LFE3-35EA-7FTN256I include 33.3K LUTs with embedded sysDSP-style multipliers, 133 user I/O supporting multiple I/O standards (LVCMOS, LVTTL, LVDS, SSTL, HSTL), integrated SERDES channels rated up to 3.2 Gbps for protocols such as PCIe Gen1, SGMII, SATA, and 8b/10b-encoded links, and a typical internal fabric operating frequency sufficient for high-speed control and data-path logic. The -7 speed grade indicates the second-fastest commercial bin within the ECP3 family, and the I-suffix indicates the industrial temperature range.
The LFE3-35EA-7FTN256I is built on a 65 nm CMOS process, which provides a favorable performance-per-watt ratio for embedded bridging, video processing, and machine-to-machine communication designs. The device integrates 1,358,848 system gates and 6.69 Mbits of embedded memory (EBR) for FIFO and buffer applications. Power-aware design flow via Lattice Diamond or ispLEVER Classic, combined with on-chip PLLs and clock-management tiles, lets designers hit timing closure at multi-hundred-megahertz Fmax while staying within a tight power envelope.
Typical applications for the LFE3-35EA-7FTN256I include low-cost video bridging (HDMI, DisplayPort, MIPI converters), industrial Ethernet / SERDES bridges, motor-control and factory-automation controllers, surveillance and machine-vision front-ends, and consumer-connectivity products such as docking stations and high-speed hubs. Industrial-grade temperature support and integrated 3.2 Gbps SERDES make it a common choice when designers need a hot-swappable, multi-protocol interconnect front-end.
When designing with this FPGA, ensure that the 256-ball FTBGA PCB footprint uses the manufacturer-recommended land pattern, including proper microvia stacking and a continuous ground plane under the BGA for signal-integrity and thermal relief. Plan clock trees around the on-chip PLLs and use the Lattice Diamond toolchain for synthesis, place-and-route, and SERDES configuration. For high-speed SERDES channels, follow the reference schematics for AC-coupling capacitor selection, 100-ohm differential routing, and pre-emphasis / de-emphasis settings as documented in the LatticeECP3 family data sheet.
This page synthesizes distributor pricing, same-family and cross-brand drop-in alternatives, comparison parameters, and practical design notes that go beyond the bare Lattice ECP3 datasheet, helping procurement and engineering teams make informed component decisions.
RFQ
İletişim