Ürünler (46.000+)

LFE2-6E-6T144I - 6K LUT FPGA, 90 I/O, 1.2 V | Lattice
LFE2-6E-6T144I

LFE2-6E-6T144I - 6K LUT FPGA, 90 I/O, 1.2 V | Lattice

The Lattice Semiconductor LFE2-6E-6T144I is an ECP2 series field-programmable gate array with 6,000 logic cells, 90 I/O, and 56,320 RAM bits in a 144-LQFP surface-mount package. The verified product data identifies a 1.2 V device with a -6 speed designation and an industrial temperature option encoded by the part number. Its architecture combines programmable logic resources, block RAM, and dedicated DSP capability in a compact programmable-logic device suited to embedded control, signal processing, communications, and industrial equipment. An FPGA is a reconfigurable digital semiconductor that contains configurable logic blocks and programmable interconnect. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA can be programmed after manufacture to implement control logic, data paths, interfaces, and algorithms. The ECP2 family belongs to the broader FPGA and programmable-logic hierarchy, combining flexible parallel hardware with configuration-based design updates. The LFE2-6E-6T144I provides 6K logic elements, 90 I/O, and 56,320 RAM bits according to DigiKey and Mouser results. One supplier result also identifies 750 logic array blocks or configurable logic blocks, while the available data reports a 1.14 V to 1.26 V supply range and an operating junction temperature beginning at -40 °C. The -6 speed grade identifies the device speed option, but the supplied data does not establish the complete timing table, configuration interface details, or absolute maximum ratings. Typical uses include industrial control logic, sensor and acquisition systems, communications interface aggregation, low-power signal processing, and embedded instrumentation. The 90-I/O count provides substantial board-level connectivity for buses, status signals, control outputs, and external interfaces. The 56,320 RAM bits can support buffering, packet storage, counters, and small data tables, while the FPGA architecture allows parallel operations without relying on sequential processor execution. When designing around this device, verify the exact pinout, configuration memory interface, clock requirements, supported I/O standards, and bank voltage constraints in the LatticeECP2/M family data sheet. Do not infer pin compatibility solely from a matching package. The supplied search data supports the core resource and package claims, but not a complete manufacturer-qualified replacement list. This page combines verified distributor specifications, application guidance, and design cautions for engineers evaluating the LFE2-6E-6T144I. It distinguishes documented facts from unavailable parameters so procurement and hardware decisions can be made without inventing electrical or timing data.

RFQ İletişim
LFE2-6E-6TN144C - 6K LUT ECP2 FPGA, 144-LQFP | Lattice
LFE2-6E-6TN144C

LFE2-6E-6TN144C - 6K LUT ECP2 FPGA, 144-LQFP | Lattice

The Lattice Semiconductor LFE2-6E-6TN144C is a member of the LatticeECP2 (ECP2) family of Field Programmable Gate Arrays (FPGAs) fabricated on a 90 nm CMOS process, integrating 6,000 Look-Up Tables (LUTs), 56,320 flip-flops (or system gates), and 90 user I/O in a 144-pin TQFP/LQFP (TQ = Thin Quad Flat Pack) surface-mount package. The device features a -6 speed grade, operates from a 1.2 V core supply, and supports embedded DSP blocks for low-cost signal processing. The "E" suffix denotes the ECP2 family (low-cost, high-volume) while "C" denotes the commercial temperature grade. An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic functionality is defined after manufacturing by the user via a configuration bitstream loaded into on-chip SRAM. FPGAs sit hierarchically under programmable logic -> logic devices -> digital integrated circuits -> semiconductors. Unlike ASICs, FPGAs offer rapid prototyping, in-field re-programmability, and parallel hardware execution, making them ideal glue logic, interface bridging, and pre-silicon validation platforms. Key features of the LFE2-6E-6TN144C include 6,000 LUTs, 56,320 flip-flops equivalent in system gates, 90 user I/O pins, embedded sysDSP blocks for multiply-accumulate operations, dedicated DDR memory interface support, and on-chip PLLs for clock management. The device supports multiple I/O standards including LVCMOS, LVTTL, PCI, LVDS, SSTL, and HSTL. The 144-pin TQFP package is 22 mm × 22 mm with 0.5 mm pitch. The ECP2 architecture combines high-performance FPGA fabric with low-cost positioning, providing 311 MHz internal operation and pre-engineered IP cores through Lattice's ispLeverage / Lattice Diamond design tool chain. Embedded DSP blocks (typically 18×18 multipliers) accelerate signal-processing functions at lower power than soft multipliers implemented in LUT fabric. Hardened memory interface controllers simplify DDR1/DDR2 PHY integration. Typical applications include industrial control and factory automation glue logic, telecom interface bridging (SPI, I2C, UART, parallel buses), video processing front-ends, low-volume prototyping replacement for aging CPLDs, motor control and encoder interfaces, and medical/portable instrumentation requiring low-power programmable logic. The 6K LUT density suits medium-complexity state machines, bus conversion, and DSP pre-processing. When designing with this part, ensure all I/O banks receive proper VCCIO rail voltages matching the chosen I/O standard (1.2 V–3.3 V) and that the JTAG chain is properly terminated for in-system programming. Always validate timing closure at the chosen fMAX using Lattice Diamond timing analysis, as the 311 MHz figure is best-case for internal register-to-register paths only. This page synthesizes distributor pricing, drop-in alternatives within the ECP2 family, and practical design notes not consolidated in the manufacturer datasheet, helping engineers select the right speed grade, temperature grade, and package variant for production.

RFQ İletişim
LFE2-6E-6TN144I - 6K LUT ECP2 FPGA | Lattice
LFE2-6E-6TN144I

LFE2-6E-6TN144I - 6K LUT ECP2 FPGA | Lattice

Lattice Semiconductor LFE2-6E-6TN144I is an ECP2 field-programmable gate array with 6,000 logic cells, a 90 I/O interface, a 1.2 V core supply, and a 144-pin LQFP package. The -6 speed designation identifies the performance grade, while the industrial-temperature suffix supports applications requiring extended environmental operation. Its 90 nm programmable-logic process combines configurable logic, block RAM, and DSP resources in a low-cost device family designed for embedded control, communications, industrial automation, and general-purpose digital logic. An FPGA is a programmable-logic semiconductor whose digital function is defined by loading a configuration bitstream into on-chip memory. Within the semiconductor hierarchy, the LFE2-6E-6TN144I belongs to the ECP2 family of field-programmable gate arrays, placing it below programmable logic devices and above fixed-function logic integrated circuits. This distinction allows one PCB design to support firmware-driven changes in timing, interfaces, control algorithms, or system behavior without replacing the physical device. The device provides 6,000 logic cells and 90 user I/O in a surface-mount 144-pin LQFP package measuring 20 mm by 20 mm. A 1.2 V core operating voltage supports low-power logic implementation, and the -6 speed grade targets designs requiring more timing margin than slower ECP2 grades. The 90 I/O count is particularly useful for parallel control, data acquisition, industrial interfaces, and board-level integration where a programmable device must directly connect to multiple external signals. The ECP2 architecture provides programmable logic together with dedicated block RAM and DSP resources, allowing designers to implement control logic, counters, state machines, data pipelines, signal conditioning, and fixed-point processing in one device. The manufacturer classifies the part in the ECP2 family and identifies 6,000 cells, a 144-LQFP package, 90 I/O, and a 90 nm process node. This combination provides a practical platform for moderately complex digital systems where a small microcontroller is insufficient or an application-specific ASIC would not justify the development cost. Typical uses include industrial automation controllers, sensor and measurement interfaces, communication equipment, embedded data acquisition, motor and machine-control logic, and general-purpose digital signal conditioning. Its 90 I/O can simplify board partitioning when multiple buses, discrete inputs, and outputs must be consolidated. The 20 mm by 20 mm LQFP also remains practical for conventional multilayer PCB assembly methods rather than requiring fine-pitch BGA assembly. Designers should confirm the exact pin assignments, supported I/O standards, configuration requirements, clocking resources, and recommended power and decoupling networks against the manufacturer ECP2 documentation before layout release. Pay particular attention to the -6 speed designation, 1.2 V core supply, industrial-temperature ordering code, and package pinout. Configuration storage, JTAG access, programming voltage, and unused-pin treatment must also be validated for the selected board architecture. This product page combines the exact ECP2 ordering information with practical selection guidance, alternative cross-references, parameter comparisons, and design-oriented implementation notes. These resources help engineers identify whether the LFE2-6E-6TN144I fits the required logic density, I/O count, package, speed grade, and environment before beginning a new programmable-logic design.

RFQ İletişim
LFE2-6E-7F256C - 6000-LUT FPGA, 190 I/O, 256-BGA | Lattice
LFE2-6E-7F256C

LFE2-6E-7F256C - 6000-LUT FPGA, 190 I/O, 256-BGA | Lattice

The Lattice Semiconductor LFE2-6E-7F256C is an ECP2 field-programmable gate array with 6000 logic cells, 190 I/O, a 420 MHz maximum operating frequency, and a 256-ball BGA package. It is designed for compact programmable-logic applications requiring substantial logic capacity, parallel interfaces, and embedded DSP resources. The -7 speed designation and 1.2 V supply place it in the performance-oriented portion of the LatticeECP2 family. An FPGA is a semiconductor whose digital logic and interconnects are configured after manufacture. In the broader hierarchy, an FPGA is a programmable logic device and therefore a type of semiconductor IC. ECP2 devices combine LUT-based logic, programmable routing, block RAM, DSP capability, and user I/O in one package. This combination allows designers to implement control logic, interface bridges, packet processing, signal conditioning, and embedded data pipelines without relying on a custom ASIC. Verified distributor data identifies this device as an ECP2 FPGA with 6000 cells, 190 I/O, and a 256-BGA package. The LFE2-6E-7F256C also appears in comparison data as a 420 MHz, 6000-cell PBGA256 device measuring 17 x 17 mm. Its 190 available I/O support substantial board-level connectivity, while the ECP2 architecture provides a practical balance between logic density, programmable functionality, and device integration. The suffix C denotes a commercial-temperature ordering code in the supplied comparison data, but the complete temperature range is not available in the provided sources. Typical applications include industrial automation, communications infrastructure, embedded control, video and image processing, data acquisition, and DSP-assisted signal processing. Its 190 I/O are useful when an interface must connect multiple buses, counters, memory devices, converters, or control peripherals. Its 6000-cell capacity is suitable for parallel datapaths and moderate protocol stacks, although design headroom should be checked against routing, timing, RAM, DSP, and pin-assignment requirements before committing to a production build. For reliable implementation, use the manufacturer pin table and package information rather than generic BGA assumptions. Decoupling, bank-supply requirements, configuration pins, clock topology, I/O standards, and unused-ball treatment must follow the LatticeECP2/M Family Data Sheet. A programmable device also depends on a valid bitstream, correct configuration clocking, and a suitable Lattice programming interface. This page consolidates the supplied distributor listings, package information, and cross-reference evidence. It separates verified values from unavailable electrical details and does not infer pricing, lifecycle, pinout, or compliance claims that were not established by the source data. Engineers should evaluate the LFE2-6E-7F256C when a 6000-cell FPGA, 190 I/O, 420 MHz-class performance, and 256-BGA integration align with the design. Confirm timing closure, memory and DSP availability, package ball assignments, and supply status in the official documentation before hardware release.

RFQ İletişim
LFE2-6E-7T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-6E-7T144C

LFE2-6E-7T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-6E-7T144C is an ECP2 field-programmable gate array with 6,000 logic cells, 56,320 embedded RAM bits, and 90 user I/O in a 144-pin LQFP package. The verified product data identifies a 1.2 V device with a -7 speed designation and DSP capability. It is designed for compact programmable-logic applications where moderate logic density, embedded memory, and a large pin count are useful without moving to a larger FPGA. What is an FPGA? A field-programmable gate array is a reconfigurable digital integrated circuit containing programmable logic, memory, and input/output resources. An FPGA belongs to the programmable-logic hierarchy and can be programmed after manufacture to implement control logic, interfaces, data acquisition, signal processing, or embedded systems. The LatticeECP2 family combines programmable logic blocks, DSP resources, and I/O in an integrated device. The LFE2-6E-7T144C is identified by the verified sources as an ECP2 FPGA with 6,000 logic elements, 90 user I/O, 56,320 bits of on-chip RAM, and a 144-LQFP package. The separate product references also describe 750 logic blocks and a 1.14 V to 1.26 V supply range. The -7 speed code is retained from the verified listing, while the commercial temperature grade and full timing details require confirmation from the manufacturer datasheet. Its 90 user I/O make the device suitable for systems that need multiple external interfaces, parallel buses, status signals, or mixed control and data paths. The 144-LQFP package provides a conventional surface-mount footprint and exposes substantially more pins than a small FPGA package. Designers should account for package routing, power distribution, signal integrity, and thermal performance in the final PCB design. Typical uses include industrial control, instrumentation, embedded data acquisition, communications interfaces, DSP-assisted signal processing, and compact embedded control platforms. The DSP feature cited in the verified listings can reduce external processing hardware when the design uses suitable fixed-point operations and parallel datapaths. Before finalizing a design, verify the pinout, bank voltages, supported I/O standards, configuration method, clock requirements, and power-sequencing constraints against the LatticeECP2/M Family Data Sheet. The available search data does not provide a manufacturer-controlled purchase price or complete pin-level assignment, so those details must not be inferred. This page combines verified distributor specifications, package information, application guidance, and strict replacement criteria for engineers evaluating the LFE2-6E-7T144C.

RFQ İletişim
LFE2-6E-7TN144C - 6K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-6E-7TN144C

LFE2-6E-7TN144C - 6K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-6E-7TN144C is an ECP2 field-programmable gate array with 6,000 logic cells, approximately 6K LUTs, 90 I/O, and DSP capability. The device is manufactured in 90 nm technology and is available in a 144-pin TQFP package measuring 20 x 20 mm. It operates from a 1.2 V supply and is assigned the -7 speed designation. The LFE2-6E-7TN144C combines programmable digital logic, dedicated DSP resources, and a substantial pin count in a surface-mount package. An FPGA is a semiconductor whose digital behavior is defined after fabrication by loading a configuration bitstream. Within the product hierarchy, the LFE2-6E-7TN144C is a field-programmable gate array, a parallel programmable-logic device, and an FPGA within Lattice Semiconductor's ECP2 family. Unlike a fixed-function logic IC, an FPGA can implement parallel processing, control, communication, signal-conditioning, and data-capture functions in one device, reducing external component count when several independent logic blocks are required. The device's 6,000-cell ECP2 architecture provides about 6K LUTs for combinational and sequential logic, while 90 I/O positions provide substantial board-level connectivity. DSP capability supports designs involving multiplication, accumulation, filtering, and fixed-point signal processing. The 1.2 V core supply and -7 speed designation place the part in an ECP2 configuration optimized for compact, cost-sensitive programmable-logic systems requiring a large number of package pins. A 144-pin TQFP provides more I/O than smaller ECP2 packages, making this device useful when external interfaces, parallel buses, memory connections, or multiple high-speed signals dominate the design. The 20 x 20 mm body remains larger than a compact QFN package, but its exposed lead geometry supports conventional PCB assembly, inspection, and rework. Design teams should use the manufacturer pin table and package drawing to assign every power, ground, configuration, clock, and user I/O connection. Typical applications include parallel data acquisition, industrial control and automation, embedded protocol bridging, sensor aggregation, digital signal processing, general-purpose control logic, and communication-interface consolidation. Its combination of programmable logic, DSP support, 90 I/O, and a 144-pin package is particularly useful when a design must implement several bus interfaces or acquisition channels around a common control engine. The principal design considerations are power sequencing, configuration management, clock integrity, I/O voltage compatibility, and PCB routing density. Confirm that every connected peripheral uses compatible voltage levels, place configuration and decoupling networks according to the manufacturer reference design, and use controlled clock routing for timing-sensitive interfaces. Although alternatives exist in the same ECP2 family, speed grade and temperature suffix differences can alter interchangeability. This product page consolidates the exact device identity, package information, technical comparisons, and practical replacement guidance into one engineering-focused reference. It also distinguishes true same-package ECP2 alternatives from parts that differ in speed grade, temperature grade, or package designation, helping PCB designers make informed decisions without assuming that every similarly named FPGA is interchangeable.

RFQ İletişim
LFE2-6SE-5F256C - 6K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-6SE-5F256C

LFE2-6SE-5F256C - 6K LUT ECP2 FPGA | Lattice Semiconductor

The Lattice Semiconductor LFE2-6SE-5F256C is an ECP2 series field-programmable gate array with 6,000 logic cells, 190 user I/O, and 56,320 bits of embedded block RAM. It operates from a 1.14 V to 1.26 V core supply and is packaged in a 256-ball FPBGA measuring 17 mm by 17 mm. The device is intended for compact embedded systems requiring programmable logic, parallel digital interfaces, and dedicated RAM resources. An FPGA is a semiconductor whose internal digital circuits are configured after manufacture. The LFE2-6SE-5F256C belongs to the ECP2 low-power FPGA family and combines configurable logic, block RAM, programmable I/O, and embedded DSP functions. This makes it a practical platform for consolidating control logic, communication interfaces, and small signal-processing functions into one device instead of using several discrete components. The principal resource figures are 6,000 logic cells, 190 user I/O, and 56,320 bits of block RAM. Its 1.2 V operating class supports low-voltage digital systems, while the 256-FPBGA package provides a high pin count for parallel buses and multi-channel interfaces. The -5 ordering code identifies the device speed grade, and the C suffix identifies the commercial temperature grade. The exact maximum operating frequency and temperature limits must be confirmed against the manufacturer datasheet before a production design is released. Within the ECP2 architecture, configurable logic blocks implement Boolean, arithmetic, control, and state-machine functions. Embedded block RAM provides dedicated storage for packet buffers, sampled data, lookup tables, and display or communications data. Programmable I/O blocks support external interfaces, while DSP resources can accelerate multiply-accumulate operations used by filters, waveform generation, and digital signal processing. These functions allow one FPGA to replace combinations of programmable logic and fixed-function digital ICs. Typical uses include industrial equipment controllers, motor and sequencing logic, data-acquisition front ends, communication gateways, embedded control systems, and compact consumer products. The 190 I/O count is particularly useful when a design must connect multiple sensors, actuators, memory devices, and parallel buses. The 56,320-bit RAM inventory is also suitable for buffering short frames, retaining sampled values, or implementing fixed-size lookup tables without external memory. Power and layout planning remain central to a successful BGA implementation. Confirm every supply rail, decoupling requirement, configuration interface, and pin assignment in the manufacturer datasheet. Preserve the specified ball assignments and follow the recommended land pattern, fanout, and manufacturing guidelines. Configuration storage, clocking, and I/O standards should be selected early because they affect both the PCB and the programmable design. This product page combines the verified device identity with application guidance, package-aware comparisons, and practical FPGA design notes. It also distinguishes same-family ordering options from their documented resource and ordering differences, helping engineers assess migration paths without overlooking speed, temperature, or board-level compatibility.

RFQ İletişim
LFE2-6SE-5F256I - 6000-LUT ECP2 FPGA, 256-BGA | Lattice
LFE2-6SE-5F256I

LFE2-6SE-5F256I - 6000-LUT ECP2 FPGA, 256-BGA | Lattice

Lattice Semiconductor LFE2-6SE-5F256I is an ECP2 field-programmable gate array with 6000 logic elements, 190 general-purpose I/O pins, and 56,320 bits of embedded RAM in a 256-ball BGA package. The device operates at a 1.2 V core voltage, includes S-Series DSP capabilities, and is identified as a 90 nm FPGA rated at a maximum clock frequency of 311 MHz. An FPGA is a programmable semiconductor in which logic, interconnect, and I/O behavior are configured through a bitstream rather than fixed during fabrication. ECP2 devices occupy the FPGA hierarchy alongside field-programmable gate arrays, programmable logic, and digital logic devices. Their combination of LUT-based logic, embedded block RAM, programmable I/O, and high-speed serial resources supports parallel processing, control, signal conditioning, and interface bridging within a single package. The LFE2-6SE-5F256I provides 6000 logic elements organized into 750 LABs or CLBs. Its 56,320 RAM bits support buffers, lookup tables, packet storage, and embedded data processing, while 190 I/O pins provide substantial interface capacity. The S-Series DSP feature set allows the FPGA fabric to implement parallel arithmetic, filtering, and fixed-point processing functions without requiring a separate DSP device in many designs. The device uses a 1.2 V supply for its programmable logic core. Its 256-BGA package is approximately 17 mm by 17 mm and is intended for surface-mount assembly. Because a BGA package has solder balls beneath the device, PCB layout must account for via-in-pad or via-under-ball routing, thermal management, assembly process capability, and the manufacturer’s recommended land pattern and component placement rules. Typical uses include industrial control, communications infrastructure, test and measurement, embedded signal processing, video interface bridging, and compact data-acquisition systems. The combination of 190 I/O and 56,320 RAM bits is particularly useful for designs that connect multiple buses, capture parallel data, and perform local processing without adding a separate high-speed memory device. Design decisions should begin with the intended clock rate, I/O voltage standards, RAM usage, pin constraints, and thermal environment. Because the -5 and I suffixes encode device-specific ordering information, engineers should confirm speed, temperature, and qualification requirements against the manufacturer documentation before releasing a production BOM. This page organizes the core ECP2 resources, package characteristics, drop-in candidates, design guidance, and application-specific engineering considerations into a practical selection reference for FPGA hardware development.

RFQ İletişim
LFE2-6SE-5T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-6SE-5T144C

LFE2-6SE-5T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-6SE-5T144C is an ECP2 field-programmable gate array with 6,000 logic cells, 6K LUTs, and 90 user I/O in a 144-LQFP package. It operates from a 1.2 V core supply and is identified with a -5 speed grade in the product listing. The device also includes S-Series DSP capability, making it suitable for compact control, interface, signal-processing, and embedded programmable-logic designs that require deterministic parallel I/O in a moderate pin-count package. An FPGA is a reconfigurable semiconductor whose logic, routing, and digital signal-processing resources can be programmed after manufacture. In the product hierarchy, the LFE2-6SE-5T144C is a programmable logic device, an FPGA, and specifically a member of the Lattice ECP2 family. Unlike a fixed-function application-specific integrated circuit, an FPGA allows parallel interface logic, control sequences, and DSP operations to be consolidated into one device while retaining field-updatable configurations. The ECP2 architecture provides 6K LUTs, 90 I/O, and S-Series DSP resources in the 144-LQFP configuration. The 1.2 V operating voltage identifies the device as a modern FPGA intended for integration with contemporary digital logic, while the -5 designation denotes the listed speed grade. The 144-pin LQFP package provides substantially more I/O than a small FPGA package and is practical for parallel buses, memory interfaces, control logic, and external data acquisition functions. Technical selection must account for both architecture and board constraints. ECP2 devices share a programmable platform, but ordering suffixes can distinguish speed grade, temperature grade, and package-related ordering options. Because FPGA configuration determines the implemented logic, designers should verify the exact device pinout, configuration interface, supported I/O standards, clocking resources, and power requirements in the LatticeECP2/M Family Data Sheet before committing the PCB footprint. Typical uses include industrial control modules, sensor and measurement interfaces, communication protocol bridges, audio or control DSP, and general-purpose embedded logic. The 90-I/O count is especially useful when several buses or discrete digital interfaces must be consolidated. The S-Series DSP resources can accelerate multiply-accumulate-oriented operations, although final throughput depends on the selected clock, routing, and logic architecture. PCB implementation requires careful attention to the 144-LQFP footprint, 1.2 V supply quality, decoupling, configuration access, and I/O assignment. Place bypass capacitors close to the supply pins, preserve a continuous return path, and follow the manufacturer's pin and layout guidance for the selected ECP2 package. Designers should also account for unused pins and configuration behavior in their board-level validation. This page organizes the published Lattice ECP2 specifications, same-package ordering alternatives, application guidance, and practical implementation notes. It supports design triage for the LFE2-6SE-5T144C by connecting resource counts, package capacity, speed-grade differences, and replacement constraints while directing final electrical and pin-level decisions to the manufacturer documentation.

RFQ İletişim
LFE2-6SE-5T144I - 6K LUT FPGA, 90 I/O, TQFP-144 | Lattice
LFE2-6SE-5T144I

LFE2-6SE-5T144I - 6K LUT FPGA, 90 I/O, TQFP-144 | Lattice

Lattice Semiconductor LFE2-6SE-5T144I is an ECP2-series field-programmable gate array with 6,000 logic cells, 6K LUTs, 90 I/O, and a 144-pin TQFP package. It operates from a 1.2 V core supply and is specified as an industrial-temperature, -5 speed-grade device. The combination of programmable logic, DSP capability, and 90 user I/O makes it suitable for embedded control, signal processing, communications, and industrial interface consolidation. An FPGA is a semiconductor device whose digital logic is configured after manufacture. By combining programmable lookup-table logic, programmable interconnect, memory resources, and dedicated input/output blocks, an FPGA allows one physical device to implement functions that might otherwise require several discrete logic devices. Within the broader semiconductor hierarchy, an FPGA belongs to the programmable-logic family, alongside CPLDs, and provides higher implementation flexibility than fixed-function logic. The LFE2-6SE-5T144I provides 6,000 FPGA logic cells and 6K LUTs, giving a design engine approximately 12,000 registers when both halves of each logic cell are used. Its 90 I/O pins support connections to external memories, processors, sensors, communications transceivers, and industrial peripherals. The 1.2 V core supply identifies it as a modern low-voltage FPGA architecture, while the -5 grade denotes its speed position within the ECP2 ordering system. The part is intended for industrial environments rather than the extended automotive grade. The ECP2 implementation includes DSP-oriented resources suited to arithmetic and filtering functions, as well as serial-interface capabilities referenced in the product description. These resources allow designers to consolidate signal-processing and control logic into a single programmable device. The 144-pin TQFP package also exposes substantially more device connectivity than smaller FPGA packages, making the device appropriate for designs that need multiple parallel buses, memory interfaces, or external control signals. Typical uses include industrial automation controllers, data-acquisition systems, communications equipment, embedded processing adjuncts, and general-purpose embedded control. In a data-acquisition system, its parallel I/O can connect to converters or sensors while programmable logic performs filtering, protocol handling, and control. In industrial equipment, the -5 speed grade and industrial temperature designation align with long-running control systems where device availability and deterministic logic performance are important. Designers should match the selected ECP2 pinout, bank voltage requirements, configuration method, memory interface, and differential I/O constraints against the exact 144-pin device documentation. Power planning should include separate treatment of the 1.2 V core and applicable I/O supply rails. Configuration signals, clocking, decoupling, and serial programming connections must also be verified against the manufacturer pin-description and configuration guidance before schematic release. This product page combines the core ECP2 device facts with package-aware replacement guidance, design considerations, and application-focused engineering context. It helps distinguish speed, temperature, and package suffix changes that otherwise look interchangeable but can affect qualification, timing, and production sourcing decisions.

RFQ İletişim
LFE2-6SE-6F256C - 6000-LUT ECP2 FPGA, 357MHz, 256-BGA
LFE2-6SE-6F256C

LFE2-6SE-6F256C - 6000-LUT ECP2 FPGA, 357MHz, 256-BGA

The Lattice Semiconductor LFE2-6SE-6F256C is an ECP2 field-programmable gate array with 6,000 logic cells, 190 user I/O, 357 MHz performance, and a 1.2 V operating supply in a 256-pin FBGA package. It is designed for embedded logic, interface bridging, control, and signal-processing designs requiring a compact programmable implementation. An FPGA is a programmable-logic semiconductor whose lookup tables, registers, and interconnect resources are configured by a bitstream rather than permanently connected by masks. The ECP2 family belongs to the broader FPGA and programmable-logic hierarchy, combining logic fabric, configurable I/O, embedded memory resources, and dedicated signal-processing capabilities in one device. This makes the LFE2-6SE-6F256C suitable when design rules or interfaces are likely to evolve after prototyping. The device provides 6,000 logic cells, 56,320 flip-flops, 190 I/O, and S-Series DSP resources according to the manufacturer product listing. Its maximum reported performance is 357 MHz. The 1.2 V operating specification supports modern low-voltage logic implementations, while the 256-pin FBGA package provides high I/O density for designs with numerous parallel, differential, serial, or mixed-signal connections. The package measures 17 x 17 mm according to the indexed datasheet listing. The LFE2-6SE-6F256C is identified as a 90 nm ECP2 FPGA. Its programmable architecture allows designers to implement control logic, bus arbitration, protocol conversion, data acquisition, and DSP functions in parallel. The S-Series designation corresponds to the ECP2 family feature set listed for the part, including S-Ser DSP capability. Configuration, programming, timing, and I/O details should be checked against the manufacturer ECP2 documentation for the exact device revision. Typical applications include industrial control systems, communications interfaces, instrumentation, embedded test equipment, video and image processing, sensor fusion, and general-purpose embedded logic. The 190 I/O count is particularly useful for parallel control or data-acquisition designs, while DSP resources can accelerate filtering, arithmetic, and signal-conditioning operations without relying on a separate processor for every function. PCB implementation requires careful treatment of the 256-ball BGA land pattern, power and ground distribution, decoupling, and high-speed routing. Follow the package ball map, recommended power architecture, and decoupling guidance in the Lattice ECP2 documentation. Validate signal integrity and timing after PCB fabrication rather than relying only on schematic-level assumptions. This product page consolidates the exact device identity, package and capacity information with application guidance, comparison considerations, and practical design notes. It helps engineers distinguish the ECP2 options by logic capacity, speed, temperature suffix, and package while emphasizing that a valid hardware replacement still requires pinout, timing, configuration, and lifecycle verification.

RFQ İletişim
LFE2-6SE-6F256I - 6K LUT ECP2 FPGA, 256-BGA | Lattice
LFE2-6SE-6F256I

LFE2-6SE-6F256I - 6K LUT ECP2 FPGA, 256-BGA | Lattice

Lattice Semiconductor LFE2-6SE-6F256I is an ECP2 field-programmable gate array with 6,000 logic elements, 6K available LUTs, 190 user I/O pins, and 56,320 RAM bits in a 256-BGA package. The device operates from a 1.2 V core supply and is identified as a -6 speed-grade industrial option. An FPGA is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions after hardware manufacture. The ECP2 family occupies the FPGA hierarchy below application-specific programmable logic and combines programmable logic blocks, embedded block RAM, programmable I/O, and dedicated serial capabilities in one highly integrated device. This makes the LFE2-6SE-6F256I suitable for embedded control, communications, industrial automation, and signal-processing systems. The principal resources include 6,000 logic elements, 56,320 RAM bits, and 190 user I/O, while the device is identified as a 6K LUT ECP2 FPGA with S-Ser DSP support. Its -6 ordering code denotes the speed grade shown in the product listing. The 256-BGA package provides a dense board footprint for designs requiring extensive connectivity, although ball assignments, differential I/O support, and exposed-pad requirements must be confirmed against the manufacturer pinout and package documentation before layout release. The ECP2 architecture supports parallel programmable logic, embedded memory, and high-speed serial communication resources in a single device. Designers can use the 190 available user I/O for control signals, external memory interfaces, sensor acquisition, or industrial bus connectivity where the relevant bank voltage and interface limits permit. Logic utilization depends on the selected clocking, memory, I/O standards, and routing architecture, so a design should be fitted with the Lattice implementation tools rather than estimated solely from LUT count. Typical applications include industrial control systems, network interface modules, video and image-processing pipelines, test equipment, industrial networking, and embedded serial bridges. The device is particularly relevant when moderate logic density and a large I/O count are more important than very high FPGA capacity. It also suits designs requiring an S-Ser DSP path for serialization, clocking, or data movement. PCB implementation should preserve the manufacturer's ball map, power architecture, decoupling requirements, and high-speed routing rules. Validate every supply rail, I/O voltage, configuration connection, and thermal condition against the exact -6F256I ordering code. When planning a migration, distinguish speed-grade, temperature-grade, package, and density changes because a shared package name alone does not establish pin-to-pin interchangeability. This product page combines the verified ECP2 resource and package data with same-package alternatives, comparison parameters, and design guidance. It supports early architecture selection while leaving final pin assignment, timing closure, power budgeting, and board-layout approval to the manufacturer documentation and Lattice design flow.

RFQ İletişim
LFE2-6SE-6T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-6SE-6T144C

LFE2-6SE-6T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-6SE-6T144C is an ECP2 field-programmable gate array with 6,000 logic cells, 90 user I/O, and a -6 speed grade in a 144-pin TQFP/LQFP package. The device uses 90 nm FPGA technology, operates with a 1.2 V core supply, and includes programmable serial SerDes resources suitable for high-speed communications and DSP-oriented signal processing. An FPGA is a user-programmable semiconductor in which interconnect and logic are configured after manufacture. The ECP2 family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks, embedded block RAM, programmable I/O, and dedicated high-speed serial channels. This makes the device useful where designers need parallel processing, flexible interfaces, protocol adaptation, or deterministic hardware logic in a compact surface-mount package. The LFE2-6SE-6T144C provides 6,000 FPGA cells, 56,320 flip-flops, and 90 user I/O according to its manufacturer product listing. Its -6 performance designation identifies the device speed option, while the 144-pin package exposes substantially more I/O than smaller FPGA packages. Integrated serial capability supports applications requiring multiple high-speed links rather than only parallel logic and general-purpose I/O. The ECP2 architecture is implemented in 90 nm process technology and uses a 1.2 V core voltage. This combination places the device in the low-voltage programmable-logic class, where system-level power depends on core voltage, I/O standards, switching activity, configuration method, and utilization. The 144-pin TQFP/LQFP package also provides a large perimeter for routing general-purpose I/O and reduces the need for fine-pitch fan-out in prototype and medium-density designs. Typical uses include serial-interface bridges, industrial control and instrumentation, test and measurement equipment, embedded DSP pipelines, data acquisition front ends, and communications equipment requiring multiple SerDes channels. The device can consolidate protocol conversion, clock-domain interfacing, packet framing, and parallel control logic into one programmable component while preserving the flexibility of FPGA-based updates. PCB design should preserve adequate decoupling at every supply pin, route configuration and serial interfaces according to the manufacturer pinout, and validate high-speed channel routing with controlled-impedance geometry. Designers should also account for the -6 speed grade in timing constraints and confirm the exact I/O voltage domains before assigning pins to external standards. This page combines the exact LFE2-6SE-6T144C specifications, family-level replacement guidance, package information, application engineering notes, and a parameter comparison to support faster design evaluation and sourcing decisions.

RFQ İletişim
LFE2-6SE-6T144I - 6K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-6SE-6T144I

LFE2-6SE-6T144I - 6K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-6SE-6T144I is an ECP2 field-programmable gate array with 6,000 logic cells, 90 user I/O, S-Series DSP support, and a 1.2 V core in a 144-LQFP package. It is intended for compact embedded programmable-logic designs requiring deterministic hardware implementation, serial connectivity, and flexible general-purpose I/O in a surface-mount package. An FPGA is a semiconductor whose internal logic, interconnects, and peripheral blocks are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device, a complement to the ASIC category, and a reconfigurable implementation of digital logic. ECP2 devices provide a practical platform for control logic, interface bridging, signal conditioning, embedded protocol handling, and modest parallel-processing tasks where software-only execution would be less deterministic or less flexible. The LFE2-6SE-6T144I combines 6,000 LUTs with 90 user I/O in its 144-LQFP configuration. Its S-Series designation identifies the ECP2 feature family with DSP-oriented capabilities, while the -6 suffix identifies the device speed grade. The 1.2 V core supply supports low-voltage digital implementation, and the 144-LQFP package exposes more I/O than smaller FPGA packages while remaining compatible with standard surface-mount assembly methods. Compared with an application-specific integrated circuit, this FPGA permits design changes to be implemented through programmable logic rather than a new silicon fabrication run. That flexibility is useful for product variants, field upgrades, and prototypes. Compared with a microcontroller, the FPGA can execute multiple finite-state-machine, filtering, serial-bridge, or data-formatting operations in parallel, provided the design fits its 6,000-LUT resource budget. Typical uses include industrial control modules, serial protocol bridges, instrumentation signal paths, embedded video-control functions, communication front ends, and general-purpose digital logic. Selection should begin with the required number and type of I/O, estimated LUT and routing demand, supported serial interfaces, clocking plan, and operating environment. Engineers should also verify configuration memory requirements and pin assignments in the Lattice device documentation before layout release. A critical design consideration is complete pin and power planning. Place all decoupling capacitors next to the appropriate supply pins, route configuration and serial signals away from sensitive analog paths, and verify every external pin connection against the package-specific pin table. The 144-LQFP footprint is mechanically standardized, but footprint similarity alone does not guarantee that another ECP2 device has equivalent logic resources, serial interfaces, or configuration behavior. This product record combines distributor specifications, package identification, comparison parameters, and practical implementation guidance. It helps engineers identify whether the LFE2-6SE-6T144I matches an ECP2 design requirement and provides a disciplined basis for evaluating same-family drop-in candidates before schematic capture and PCB layout begin.

RFQ İletişim
LFE2-6SE-7F256C - 6K ECP2 420 MHz FPGA | Lattice
LFE2-6SE-7F256C

LFE2-6SE-7F256C - 6K ECP2 420 MHz FPGA | Lattice

The Lattice Semiconductor LFE2-6SE-7F256C is an ECP2 field-programmable gate array with 6,000 logic cells, 190 user I/O pins, 56,320 RAM bits, and a 420 MHz system frequency in a 256-FBGA surface-mount package. It operates from a 1.14 V to 1.26 V core supply and is manufactured using 90 nm FPGA technology. An FPGA is a programmable-logic semiconductor whose digital architecture is configured after fabrication. ECP2 devices combine configurable logic blocks, block RAM, programmable I/O, and dedicated high-speed serial resources in one device. The LFE2-6SE-7F256C therefore belongs to the programmable-logic hierarchy of FPGAs and CPLDs, providing a flexible platform for parallel data processing, control logic, communications, and embedded signal handling. The principal device features include 6,000 logic cells organized into programmable logic resources, 190 user I/O, and 56,320 total RAM bits. Its 420 MHz system frequency supports timing-intensive designs, while the ECP2 S-Ser DSP capability expands the scope for serial interface and signal-processing implementations. The 1.2 V operating class aligns the core with low-voltage FPGA designs. The device uses 90 nm process technology and a 256-FBGA package measuring 17 mm by 17 mm. A fully programmable architecture allows logic functions, interconnect paths, I/O standards, and embedded memory blocks to be defined in the device configuration rather than implemented as fixed application-specific circuitry. This flexibility shortens development cycles and supports product revisions that would otherwise require new mask sets. Typical applications include industrial control and data acquisition, communications infrastructure, embedded video processing, interface bridging, and test equipment. The 190 available I/O positions suit systems combining multiple buses, status signals, and high-speed serial channels. Its 6,000-cell logic capacity is appropriate for compact control, protocol handling, and DSP-adjacent functions rather than exceptionally large accelerator designs. Designers should treat power, configuration, clocking, signal integrity, and thermal requirements as an integrated package-level task. The 256-FBGA footprint requires a qualified escape-routing strategy, while the low core voltage requires careful rail design and decoupling. Confirm the exact pin assignments, supported I/O standards, configuration scheme, and bank power requirements in the manufacturer datasheet before layout release. This product record combines device architecture, verified technical attributes, application guidance, package considerations, and same-footprint ECP2 alternatives. It is designed to help engineers identify whether the LFE2-6SE-7F256C provides the required logic, memory, I/O, speed, and package resources before beginning implementation.

RFQ İletişim
LFE2-6SE-7T144C - 6K LUT ECP2 FPGA | Lattice
LFE2-6SE-7T144C

LFE2-6SE-7T144C - 6K LUT ECP2 FPGA | Lattice

The Lattice Semiconductor LFE2-6SE-7T144C is an ECP2 field-programmable gate array with 6000 logic elements, 90 user I/O, 56320 bits of embedded RAM, and a 1.2 V core supply, housed in a 144-pin TQFP package. The -7 speed grade targets demanding control, interface, and signal-processing designs where deterministic logic performance and ample I/O are required in a surface-mount package. An FPGA is a reconfigurable digital semiconductor that combines programmable logic blocks, programmable I/O, memory resources, and routing into one integrated circuit. The LatticeECP2 family sits within the broader programmable-logic hierarchy of FPGA, programmable-logic device, semiconductor, and embedded digital implementation. Its advantage over fixed-function logic is that interfaces, control sequences, and parallel data paths can be revised without changing the printed circuit board. The LFE2-6SE-7T144C provides 6000 logic elements organized into 750 logic array blocks, 56320 bits of block RAM, and 90 user I/O. Its 1.14 V to 1.26 V operating supply range centers on a nominal 1.2 V rail. The SE device family includes dedicated digital signal processing resources, making it useful for parallel arithmetic, filtering, and data acquisition rather than only simple glue logic. The -7 designation identifies the device speed grade, while 144C identifies the 144-pin commercial-temperature ordering configuration. In the TQFP package, the programmable I/O are distributed around the perimeter for board-level access. Configuration and design implementation are handled through the ECP2 development and programming environment, allowing logic, interconnections, and I/O assignments to be stored in the device configuration memory. Typical uses include industrial automation, communications interfaces, instrumentation, embedded control, video timing, and digital signal-processing front ends. The 90 available I/O are particularly useful for parallel sensor capture, memory interfaces, control buses, and external converters. Compared with a smaller CPLD, the 6000-logic-element device supports more concurrent datapaths and embedded memory, while its 144-pin package leaves more I/O than a compact QFP device. PCB design should preserve the device's specified core and I/O supply decoupling, confirm every bank’s voltage requirements, and route high-speed interfaces according to the LatticeECP2 layout guidance. Signal-integrity performance depends on correct termination, controlled impedance, short return paths, and separating sensitive analog or clock inputs from fast digital outputs. This product page combines exact device characteristics with application guidance, drop-in family alternatives, and PCB-focused design notes. These engineering details help shorten component selection while making the distinction between logically similar LatticeECP2 devices explicit.

RFQ İletişim
LFE2-70E-5F672C - 68K LUT ECP2 FPGA, 500 I/O | Lattice
LFE2-70E-5F672C

LFE2-70E-5F672C - 68K LUT ECP2 FPGA, 500 I/O | Lattice

The Lattice Semiconductor LFE2-70E-5F672C is an ECP2 field-programmable gate array with 68,000 logic cells, 68K LUTs, 500 I/O, and a 1.2 V operating class, supplied in a 672-pin FBGA package. The device is designed for embedded programmable-logic applications requiring substantial parallel connectivity, configurable logic, DSP resources, and embedded memory. A field-programmable gate array is a programmable-logic device within the broader semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA can be configured after manufacture to implement control logic, data paths, protocol interfaces, signal processing, and system interconnect functions. The ECP2 family combines programmable logic blocks, programmable interconnect, embedded memory, and DSP capability on one device. Key features include approximately 68,000 logic elements, 68K LUTs, 500 I/O, and approximately 1.06 Mbits of embedded RAM. The reported 1.2 V device class supports power-conscious designs, while the 500 available I/O positions make the FPGA suitable for parallel sensor aggregation, industrial control, video-data interfaces, communications infrastructure, and embedded test systems. The 672-pin FBGA footprint provides a high connection count for systems with extensive board-level routing requirements. The LFE2-70E-5F672C belongs to the LatticeECP2 family and is built using 90 nm technology. This combination places the device between low-density programmable logic and larger systems that require more connectivity. Its broad I/O availability can reduce the need for external interface devices, although board design must carefully account for high pin count, power delivery, thermal performance, and routing congestion. Typical applications include industrial automation and factory control, instrumentation, data acquisition, telecommunications line-card functions, embedded storage interfaces, camera and image-processing front ends, and test-and-measurement systems. In these designs, the FPGA can consolidate parallel logic, packet handling, counter, timing, and DSP functions while keeping configuration and upgrades flexible. A key design consideration is that FPGA replacement is not limited to matching the logical capacity of the FPGA. A valid transition must also confirm package ball assignment, supported I/O standards, core voltage requirements, configuration interface behavior, memory resources, DSP mapping, speed grade, and thermal performance. Review the pin-description table and power requirements in the manufacturer datasheet before finalizing a PCB footprint or migrating an existing design. This product page combines the verified ECP2 device characteristics, same-family migration options, and practical implementation guidance to help engineers evaluate the LFE2-70E-5F672C against board-level integration, capacity, and sourcing constraints.

RFQ İletişim
LFE2-70E-5F672I - 68K ECP2 FPGA, 500 I/O | Lattice
LFE2-70E-5F672I

LFE2-70E-5F672I - 68K ECP2 FPGA, 500 I/O | Lattice

Lattice Semiconductor LFE2-70E-5F672I is an ECP2 field-programmable gate array with 68,000 logic elements, 500 user I/O, and a 500 MHz clock speed, housed in a 672-pin FBGA package. The industrial-grade device operates from a 1.2 V core supply and is manufactured using 90 nm FPGA technology. Its architecture includes 8,500 logic array blocks and 1,056,768 bits of distributed RAM for parallel signal processing, control, and interface-heavy logic designs. An FPGA is a programmable semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask programming. ECP2 devices belong to the configurable logic block, or FPGA, category and sit within the broader programmable-logic hierarchy. They combine look-up-table-based logic, programmable interconnect, block memory, distributed RAM, digital I/O, and dedicated functions such as PLL-based clock management. This makes an ECP2 useful when several interface protocols or control paths must be consolidated into one device. The principal feature of the LFE2-70E-5F672I is its combination of 68,000 logic elements and 500 user I/O in one 672-ball package. The device provides 1,056,768 bits of distributed RAM and 8,500 LABs, while its maximum stated clock speed is 500 MHz. The 672-pin FBGA arrangement supports designs requiring substantial parallel connectivity, including industrial control, communications, instrumentation, test equipment, and embedded video or data-acquisition systems. Technically, the part uses a 1.2 V core and 90 nm process technology. The 500 MHz figure represents the stated device speed grade rather than a guarantee that every user logic path can operate at that rate. Actual timing depends on architecture, interconnect routing, clock constraints, I/O standards, loading, and the selected ECP2 design tools. Designers should evaluate the complete design with timing analysis and verify the package-specific pin assignments before layout release. Typical applications include industrial data acquisition, motion and machine control, communications infrastructure, test-and-measurement systems, embedded processing peripherals, and high-channel-count programmable I/O. The 500 I/O capability is especially useful for parallel sensor aggregation, memory interfaces, clocking, high-speed serial links, and mixed external interfaces. Its 1,056,768 bits of distributed RAM can support packet buffering, data formatting, lookup tables, and local storage close to the logic that consumes the data. A critical design consideration is that the 672-ball FBGA requires careful ball assignment, power distribution, and escape-routing planning. Assign power, ground, configuration, and clock resources according to the manufacturer package guidelines, then check every ball against the pinout and power-decoupling recommendations in the ECP2 documentation. Leave adequate clearance between the BGA escape paths and sensitive interfaces. This page consolidates the part identity, core ECP2 resources, package constraints, drop-in ordering alternatives, and practical design guidance. It helps engineers compare the industrial suffix, speed grade, package, and legacy status before committing a new multi-layer PCB or production program.

RFQ İletişim
LFE2-70E-5F900C - 68K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-70E-5F900C

LFE2-70E-5F900C - 68K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-70E-5F900C is an ECP2 field-programmable gate array with 68,000 LUTs, 583 I/O, embedded DSP capability, a 1.2 V core supply, and a -5 speed grade. The device is packaged in a 900-ball BGA package for high-density, lead-free PCB designs. It is positioned for complex digital logic, parallel processing, interface bridging, control, and embedded signal-processing functions where programmable hardware provides flexibility without a fixed application-specific ASIC. An FPGA is a reconfigurable digital semiconductor that sits between a microcontroller and a custom ASIC. The ECP2 family combines programmable logic, block RAM, DSP resources, programmable I/O, and embedded processor capability into one device. This hierarchy places the LFE2-70E-5F900C in the FPGA and CPLD category, within programmable logic devices and the broader semiconductor market. Engineers use this architecture for parallel datapaths, protocol conversion, video and image pipelines, industrial automation, communications, and test systems. The principal capacity figures are 68,000 LUTs, 583 user I/O, and 1.2 V operation. The 900-BBGA package provides a large number of physical connections for high-speed or wide parallel designs. The -5 designation identifies the device's speed grade, while the exact timing, operating-temperature, block-memory, DSP, and power specifications remain tied to the manufacturer ordering documentation. Its programmable architecture allows logic revisions, protocol updates, and feature expansion without changing the PCB. The 900-BBGA construction requires careful board-level design. Ball assignment, power-grid distribution, decoupling, high-speed routing, and thermal performance must be developed from the manufacturer's pin and package documentation rather than inferred from generic BGA practice. Because this is a fine-pitch, high-ball-count package, assembly yield, via-in-pad policy, solder-paste stencil design, X-ray inspection, and board warpage can materially affect production reliability. Typical uses include industrial machine vision, high-speed data acquisition, network packet handling, motor and motion control, embedded communications, instrumentation, and digital signal processing. The 68K-LUT capacity and 583 I/O make the device suitable for designs combining multiple parallel processing blocks with extensive external connectivity, provided the selected configuration meets timing and power limits. When selecting a replacement, confirm the exact 900-ball footprint, pinout, voltage requirements, speed grade, temperature range, configuration interface, and supported memory resources. Same-package family members can be candidates, but pin-compatible marking alone does not prove that timing, power, or production availability are equivalent. Obtain current lifecycle and sourcing confirmation before redesigning around an alternative. This product summary combines the verified capacity, package, interface, speed, and voltage identifiers with application guidance, package-design cautions, and a drop-in-focused comparison. The pin-level schematic and electrical limits should be completed directly from the Lattice Semiconductor device documentation before schematic capture or PCB release.

RFQ İletişim
LFE2-70E-5F900I - 68K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-70E-5F900I

LFE2-70E-5F900I - 68K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-70E-5F900I is an ECP2/M field-programmable gate array with 68K LUTs, 583 I/O, 1,032 Kbit of block RAM, and a 1.2 V core supply in a 900-ball BGA package. The -5 speed grade and industrial-temperature designation make it suitable for embedded logic, control, interface, and signal-processing designs requiring a high pin count and substantial programmable logic capacity. An FPGA is a programmable semiconductor in which interconnected logic blocks, embedded memory, and programmable I/O are configured at runtime. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and combines parallel hardware processing with software-controlled configuration. Unlike a fixed-function microcontroller, this device can implement multiple digital functions concurrently while retaining field-updatable logic through its configuration system. The 68K LUTs provide substantial capacity for datapath, protocol, control, and glue-logic implementations. Its 583 I/O supports systems requiring numerous external connections, while 1,032 Kbit of embedded block RAM provides on-chip storage for buffers, lookup structures, and data paths. A 1.2 V core supply supports low-voltage logic operation, and the 900-ball BGA package provides the interconnect density required by the 70E device in demanding embedded applications. The ECP2 architecture is implemented using a 90 nm process according to the published component classification. The -5 marking identifies the device speed grade, while the I suffix identifies the industrial-temperature option. The stated industrial junction-temperature range is -40 °C to 100 °C. This combination gives designers a useful distinction between logic performance, environmental qualification, and package-level thermal constraints when planning system qualification. Typical uses include industrial automation controllers, multi-channel data-acquisition systems, industrial networking equipment, embedded video or image processing, communications infrastructure, and test-and-measurement instruments. The large I/O count is particularly useful where multiple buses, converters, memory interfaces, and control signals converge on one programmable device. Its embedded block RAM can support packet buffering, parallel data collection, and lookup functions without requiring an external memory device in moderate designs. PCB implementation requires careful power-plane and via planning because the 900-ball package provides fine-pitch, high-density routing and requires controlled escape routing from the device. Decoupling should be distributed near the power balls, while programming, configuration, clock, and user-I/O circuits should be routed to reduce skew and signal-integrity problems. Differential and high-speed interfaces must follow the device-family layout guidance, and unused balls should be treated according to the manufacturer package and board-connection instructions. This product page combines the exact orderable-device specifications with package, lifecycle, application, and design guidance. It also identifies same-package ECP2 alternatives and explains the speed-grade and temperature differences that must be checked before a replacement is approved.

RFQ İletişim
LFE2-70E-6F672C - 68K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-70E-6F672C

LFE2-70E-6F672C - 68K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-70E-6F672C is an ECP2 field-programmable gate array with 68,000 logic elements, 8,500 LABs/CLBs, 1,056,768 bits of embedded RAM, and 500 user I/O in a 672-BBGA package. It operates from a 1.2 V core supply and is identified by the -6 speed grade. An FPGA is a programmable semiconductor used to implement digital logic, signal processing, control, and interface functions after hardware manufacture. ECP2 devices belong to the Lattice field-programmable logic family, combining configurable logic blocks, embedded block RAM, programmable I/O, and dedicated DSP resources within one package. This makes the architecture suitable for designs requiring high parallel throughput and substantial on-device logic density. The LFE2-70E-6F672C provides 68,000 logic elements, 8,500 LABs/CLBs, and 1,056,768 bits of RAM. Its 500 user I/O support extensive connection to external memory, processors, data converters, communications devices, and industrial peripherals. A 1.2 V core operating voltage supports modern low-voltage FPGA designs, while the -6 designation identifies the device's specified speed option. ECP2 devices integrate programmable logic with dedicated DSP capability, allowing parallel arithmetic and filtering functions to be assigned to dedicated resources instead of consuming general-purpose LUT logic. This separation can improve timing predictability in designs that include fixed-point multiplication, FIR filtering, waveform generation, or other DSP pipelines. Board-level implementation still requires careful power, clock, configuration, and signal-integrity design. Typical applications include industrial automation, communications infrastructure, instrumentation, embedded control, video and image processing, and high-speed interface bridging. The 500-I/O count is particularly useful for systems combining multiple memory interfaces, parallel data buses, serial transceivers, and custom accelerator logic within one FPGA. Designers should preserve the 672-BBGA footprint, ball map, configuration interface, and 1.2 V power architecture when creating a PCB or migrating an existing ECP2 design. Decoupling, clock routing, configuration-boot access, and thermal management should follow the manufacturer's ECP2 guidance. Verify the exact speed grade, temperature option, and production configuration before releasing a new design. This product page consolidates the core ECP2 architecture details, confirmed package characteristics, sourcing information, and engineering guidance for the LFE2-70E-6F672C. It also distinguishes the -6 device from documented ECP2 alternatives so engineers can evaluate footprint, logic, RAM, I/O, and speed-grade differences before committing to a replacement.

RFQ İletişim
LFE2-70E-6F672I - 68K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-70E-6F672I

LFE2-70E-6F672I - 68K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-70E-6F672I is an ECP2/M field-programmable gate array with 68,000 look-up tables, 500 user I/O, a 1.2 V core supply, and a -6 speed grade in a 672-ball BGA package. It combines programmable logic with embedded block RAM for industrial embedded systems requiring high I/O density in a single package. The 672-BBGA package uses a 1 mm ball pitch and has a stated package height of 2.6 mm. An FPGA is a programmable semiconductor in which logic, routing, and I/O behavior are defined after fabrication. Within the product hierarchy, this device is an FPGA, a programmable-logic device, and ultimately a semiconductor. The ECP2 family provides a platform for parallel data processing, control logic, interface bridging, and embedded system integration. Its large user-I/O count makes the 672-ball option useful when a design requires numerous external connections or multiple high-speed interfaces. The ECP2/M architecture provides 68,000 LUTs and up to 1,032 Kb of embedded block RAM according to the ECP2 family product information. The 500-I/O configuration supports dense board-level connectivity without requiring multiple programmable devices. A 1.2 V core operating voltage reduces power-related stress in suitable system architectures, while the -6 designation identifies the device speed grade. The LFE2-70E-6F672I is identified as an industrial-temperature grade part. The -6 speed grade is intended for designs that require substantially more timing performance than the slowest ECP2 grades. However, timing closure still depends on the selected clock, I/O standards, routing density, memory usage, and external interface requirements. Because the device contains a large number of programmable resources and I/Os, system-level timing, power, and pin-placement constraints should be evaluated together before a PCB layout is released. Typical uses include industrial control systems, test and measurement equipment, communications infrastructure, video and display processing, embedded storage controllers, and high-pin-count interface consolidation. The ECP2/M device is particularly relevant where parallel logic, custom protocol handling, or multiple external buses must operate concurrently while retaining field-reprogrammability. PCB implementation requires careful BGA escape routing, continuous power and ground planes, and compliance with the manufacturer's package and pin-assignment documentation. Differential and high-speed interfaces should use the manufacturer-recommended I/O standards and controlled-impedance routing. Because a 672-ball device is difficult to rework, programming, boundary-scan, and board-level validation should be planned before production quantities are released. This product page organizes the ECP2/M capacity, package, speed, temperature, and replacement information into an engineer-focused selection guide. It also distinguishes verified drop-in options from changes that require a new pinout, package, device family, or board redesign.

RFQ İletişim
LFE2-70E-6F900C - 68K LUT ECP2 FPGA, 900-BBGA | Lattice
LFE2-70E-6F900C

LFE2-70E-6F900C - 68K LUT ECP2 FPGA, 900-BBGA | Lattice

The Lattice Semiconductor LFE2-70E-6F900C is an ECP2 field-programmable gate array with 68,000 logic elements, 68K LUTs, and 583 I/O in a 900-BBGA package. It operates from a nominal 1.2 V supply, with a listed voltage range of 1.14 V to 1.26 V, and uses the -6 speed grade. Its 900-ball package makes the device suited to high-pin-count systems requiring substantial programmable logic and parallel I/O. An FPGA is a programmable semiconductor whose internal lookup tables, registers, interconnect, and configurable I/O are defined by a design file. Within the broader device hierarchy, the LFE2-70E-6F900C belongs to the ECP2 family of FPGAs, a form of programmable logic used for parallel processing, control, interface bridging, signal generation, and embedded system functions. Unlike a fixed-function ASIC, an FPGA permits design revisions and logic changes without fabricating a new custom chip. The 68K LUT capacity provides substantial parallelism for control logic, data acquisition, protocol handling, and embedded signal processing. Its 583 I/O allow a designer to connect substantial numbers of external devices on a compact 31 mm by 31 mm package. The nominal 1.2 V core voltage and -6 speed designation place the device in the ECP2 performance range for systems balancing logic density, I/O count, power, and board-space requirements. The ECP2 architecture supports configurable logic and programmable routing rather than relying on a fixed processor instruction sequence. This makes parallel datapaths and fixed-latency control functions practical when the design is synthesized for the LFE2-70E-6F900C. PCB design must account for the dense 900-ball land pattern, high pin count, power-supply integrity, decoupling, programming access, and thermal performance associated with a large programmable logic package. Typical uses include industrial automation, communications infrastructure, test and measurement equipment, embedded control, and high-density interface consolidation. Its 583 I/O is particularly useful where numerous external memories, converters, transceivers, sensors, and digital peripherals must be connected. The -6 grade should be checked against the required clocking and system-timing targets before a design is committed to production. Power delivery and signal integrity are the principal layout concerns for this device. Place the core and I/O supply decoupling directly beside the corresponding BGA power balls, provide a stable ground reference, and follow the manufacturer package and power-territory guidance. Programming signals must remain accessible in the production test configuration, and the assembled board must tolerate the package's thermal and mechanical requirements. This product guide combines the device's exact ECP2 identifiers with package-compatible alternatives, application guidance, comparison data, and practical PCB considerations. It is structured to help engineers identify whether the LFE2-70E-6F900C matches their logic-density, I/O, package, speed-grade, and sourcing requirements before beginning schematic capture.

RFQ İletişim
LFE2-70E-6F900I - 68K LUT ECP2 FPGA, 900-BBGA | Lattice
LFE2-70E-6F900I

LFE2-70E-6F900I - 68K LUT ECP2 FPGA, 900-BBGA | Lattice

The Lattice Semiconductor Corporation LFE2-70E-6F900I is an ECP2 field-programmable gate array with 68,000 look-up tables, 583 user I/O, and 1.2 V operation in a 900-pin BGA package. It combines programmable logic, block RAM, DSP capability, and high-speed serial connectivity in a single device for communications, industrial control, video, and embedded systems. The -6 speed designation identifies its performance grade, while the industrial I suffix identifies the temperature grade. An FPGA is a semiconductor whose digital logic, interconnect, and peripheral blocks are configured after manufacture. Lattice calls this device an ECP2 FPGA, placing it in the broader hierarchy of reconfigurable logic devices, programmable logic ICs, and general-purpose semiconductors. Unlike a fixed-function ASIC, the ECP2 allows parallel interface logic, protocol bridges, control paths, and signal-processing pipelines to be consolidated into one board-level component. The LFE2-70E-6F900I provides approximately 68K LUTs and 583 I/O, giving designers substantial parallel logic capacity without requiring a large pin-count package in a separate companion device. The device also supports DSP-oriented signal processing and is identified in distributor listings as a 1.2 V ECP2 FPGA with a -6 industrial speed designation. A 900-BBGA footprint supports dense board escape routing, but its fine pitch demands careful PCB layout and assembly process control. The ECP2 architecture is appropriate when design requirements are still evolving, because interface logic can be revised through bitstream programming rather than a silicon respin. The 583 available I/O positions are especially useful for parallel buses, sensor aggregation, counter inputs, industrial control interfaces, and video timing. The 68K-LUT scale also supports multi-channel data acquisition, protocol conversion, and control systems that would otherwise require several programmable devices. Typical uses include industrial automation, test and measurement, networking equipment, video processing, sensor interfaces, and embedded communications gateways. The 900-BBGA package makes the device most suitable for high-density multilayer PCBs rather than hobbyist platforms or prototypes using through-hole construction. Signal integrity, power delivery, thermal performance, and BGA assembly yield should be considered together during layout planning. For a new design, preserve the same footprint and preserve the device's supply-voltage and configuration requirements before treating another 900-BBGA ECP2 option as interchangeable. Confirm the exact speed grade, temperature grade, pin mapping, and bitstream support in the manufacturer datasheet. Use the device pin-description table when assigning PCB tracks, because a 900-pin package cannot be validated reliably from a generic package drawing alone. This page combines distributor specifications, package details, pricing structure, drop-in candidates, comparison parameters, and practical design guidance. It also distinguishes confirmed same-footprint options from changes that require device-level verification, helping engineers shorten component-selection and hardware-review cycles.

RFQ İletişim