Ürünler (46.000+)

LM358LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments
LM358LVIPWR

LM358LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments

Texas Instruments LM358LVIPWR is a dual, low-voltage operational amplifier with a 5.5 V maximum supply voltage, 1 MHz gain-bandwidth product, and 8-pin TSSOP package. Designed for economical signal conditioning at low supply voltages, the device provides two amplifiers in one compact surface-mount package. An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between its two input voltages. Op amps belong to the amplifier IC hierarchy and are widely used for buffering, signal conditioning, voltage comparison, and closed-loop control. The dual configuration provides two amplifier channels with a common power supply, making it useful where PCB area and component count are important. The LM358LVIPWR operates from 2.7 V to 5.5 V according to the Texas Instruments LM358LV product information. Its 1 MHz gain-bandwidth product supports general-purpose low-frequency analog applications. The 8-pin TSSOP package is intended for surface-mount assembly, while the IPW ordering code identifies the tape-and-reel shipping configuration. The LM358LV family includes the single LM321LV, dual LM358LV, and quad LM324LV operational amplifiers. This family was created as a low-voltage alternative to the established LM321, LM358, and LM324 product families. The dual LM358LV configuration offers a practical balance between channel count, package size, and analog performance for cost-sensitive equipment. Typical uses include low-voltage sensor interfaces, smoke-detection circuits, personal electronics, appliance control, audio preamplification, and general-purpose signal conditioning. The two independent channels can process separate signals or be connected together for differential, gain, filtering, and comparator-style circuit arrangements. Designers should account for the device's low-voltage operating range and confirm the output-voltage swing, input-common-mode range, output-current capability, stability requirements, and channel-to-channel behavior against the application. Decoupling capacitors should be placed close to the supply pins, while input and feedback components should follow the circuit topology described in the manufacturer datasheet. This page combines the key electrical ratings, package information, comparison guidance, and practical design considerations needed to evaluate the LM358LVIPWR for low-voltage analog systems. It also provides a focused path for checking an equivalent part, requesting a quote, and confirming the correct TSSOP footprint before design release.

RFQ İletişim
LM358M - Dual 32 V, 1 MHz Operational Amplifier | Texas Instruments
LM358M

LM358M - Dual 32 V, 1 MHz Operational Amplifier | Texas Instruments

Texas Instruments LM358M is a dual, general-purpose operational amplifier with two independent channels, a 32 V maximum supply rating, 1 MHz gain-bandwidth product, and an 8-pin SOIC package. The device is designed for single-supply operation and is identified by distributor data as a standard dual operational amplifier in the SOIC-8 format. An operational amplifier is an analog signal-conditioning semiconductor device that uses high open-loop gain to amplify voltage differences. LM358M combines two amplifier channels in one package, allowing one IC to implement functions such as buffers, transimpedance stages, filters, comparators, sensor interfaces, and audio or industrial control blocks. Its dual-channel architecture can also reduce board area when both channels perform similar signal tasks. The verified listing specifies a 32 V supply-related operating class and 1 MHz gain-bandwidth product for the LM358M device. The supplied datasheet search results describe the LM358 family as internally frequency compensated for unity gain, with a large DC voltage gain of 100 dB, a wide power-supply range of 3 V to 32 V for LM358/LM358A, and an input common-mode voltage range that includes ground. These features make the part suitable for designs where the input signal is referenced to the supply ground. LM358M is packaged as an 8-SOIC, making it a practical surface-mount choice for compact analog boards. The dual amplifier organization can simplify routing when two related channels are required, while the general-purpose architecture supports broad industrial, consumer, instrumentation, and embedded-control applications. The SOIC package also supports conventional PCB assembly and inspection processes used for many analog signal-chain products. Typical applications include current sensing with a shunt amplifier, sensor-signal conditioning, active filtering, audio preamplification, comparator-style threshold detection, and low-frequency control loops. Because the verified data does not provide a complete numerical specification set, parameters such as exact input offset voltage, output-current limits, slew rate, common-mode limits, noise density, and temperature limits should be checked in the manufacturer datasheet before production release. When laying out LM358M, keep input and feedback traces short, place decoupling capacitors close to the supply pins, and avoid routing high-current return paths through sensitive analog nodes. For single-supply designs, confirm that the input common-mode range includes the signal range and that the load does not exceed the output-current capability stated in the selected device datasheet. This page consolidates verified distributor specifications, source links, package information, and practical design guidance.

RFQ İletişim
LM358M/NOPB - Dual 32 V, 1 MHz Op Amp | Texas Instruments
LM358M/NOPB

LM358M/NOPB - Dual 32 V, 1 MHz Op Amp | Texas Instruments

The Texas Instruments LM358M/NOPB is a dual operational amplifier in an 8-pin SOIC package, with two independent, internally frequency-compensated amplifiers designed for single-supply operation over a wide voltage range. The device supports supply voltages up to 32 V, operates at temperatures from 0°C to 70°C, and is characterized for operation up to 1 MHz. According to the manufacturer datasheet, the LM358 family combines low power consumption, high voltage operation, and rail-to-rail output capability at the output stage. An operational amplifier is an analog signal-processing IC that compares an input voltage with a feedback reference and amplifies the difference between them. The LM358 belongs to the operational-amplifier hierarchy, where it serves as a general-purpose voltage-feedback amplifier rather than a dedicated comparator, analog-to-digital converter, or precision reference. Two amplifiers in one package provide independent signal paths while reducing board area and simplifying dual-channel designs. Key features include two amplifier channels, a 32 V maximum supply rating, internally frequency compensation, and operation from a single positive supply or split supplies. Each channel can be used as an inverting amplifier, non-inverting amplifier, voltage follower, buffer, comparator, or general signal-conditioning stage. The low-power design is particularly useful in industrial controls, sensor interfaces, power-conversion feedback loops, and test equipment where a wide supply range is more valuable than very high bandwidth. The internal frequency compensation allows stable operation without external compensation components in conventional closed-loop configurations. This simplifies design-in because the amplifier does not require an added compensation capacitor for ordinary gain settings. Because this is an SOIC-8 device, both channels share pins for the positive supply and ground, while each channel has independent input and output terminals. Layout should still keep sensitive input nodes away from supply-return paths and high-current switching nodes. Typical uses include sensing and buffering sensor outputs, closing loops around power supplies, amplifying low-frequency control signals, and implementing threshold or comparator-style functions. In split-supply systems, the LM358 can operate from positive and negative rails, but its input common-mode and output ranges have restrictions that must be checked against the actual signal levels. The 1 MHz characterization makes it suitable for general-purpose low-bandwidth analog tasks rather than high-speed precision signal chains. Designers should verify common-mode range, output swing, load capability, input bias current, and stability for the selected feedback network. Connecting unused amplifier inputs to a defined voltage prevents input-stage behavior from becoming unpredictable. Decoupling capacitors should be placed close to the supply pins, and differential routing should be minimized to reduce noise pickup. This page combines manufacturer specifications, practical circuit guidance, package information, and a structured comparison of pin-compatible alternatives. It also identifies application-specific trade-offs involving supply range, temperature grade, package, and amplifier performance so that engineers can select the correct dual operational amplifier without relying on a generic LM358 description.

RFQ İletişim
LM358MX - Dual Operational Amplifier | Texas Instruments
LM358MX

LM358MX - Dual Operational Amplifier | Texas Instruments

The Texas Instruments LM358MX is a dual operational-amplifier device associated with the LM358 family. The supplied verified-web-data package did not return a manufacturer datasheet, distributor listing, or alternatives cross-reference, so the verified electrical ratings, package dimensions, temperature range, supply limits, pricing, and lifecycle status cannot be confirmed from the provided records. The LM358 family is commonly associated with single-supply, general-purpose dual-amplifier designs, but engineers should verify the complete LM358MX datasheet before releasing a PCB or production BOM. What is an operational amplifier? An operational amplifier is an analog active device that amplifies the difference between two input voltages while using feedback to control gain and bandwidth. A dual operational-amplifier package contains two amplifier channels and is classified as an amplifier IC within the broader semiconductor hierarchy. LM358-family devices are often considered for sensor conditioning, signal buffering, and low-frequency analog control, but the precise suitability of LM358MX for a particular application depends on verified specifications such as input common-mode range, output swing, supply current, offset voltage, slew rate, and noise. The available data does not identify the MPN suffix, package drawing, pin configuration, or ordering details. The LM358 suffix commonly denotes an SOIC-8-style variant, but that package identification is not present in the supplied verified records and therefore requires confirmation. The absence of verified data also prevents a reliable comparison with related LM358, LM2902, or competing dual-amplifier variants. Typical design evaluation should begin with the manufacturer's LM358MX datasheet and pinout. Review the recommended operating conditions, absolute maximum ratings, electrical characteristics, common-mode range, output-swing limits, and stability requirements. Confirm the exposed or non-exposed package dimensions and the PCB land pattern rather than relying on the MPN suffix alone. Applications commonly investigated for a dual operational amplifier include DC signal conditioning, transducer interfaces, active filtering, and low-frequency analog signal chains. These uses remain provisional until the LM358MX electrical limits, package geometry, and temperature ratings are verified. This page intentionally distinguishes confirmed sourcing information from engineering claims that still require datasheet confirmation. This page provides a structured place to compare the MPN, assess unavailable datasheet fields, identify same-family drop-in options, and review practical selection questions. For a production decision, use the manufacturer datasheet and current authorized-distributor inventory rather than inferred suffix data. The verified records were retrieved on 2026-10-29, but the underlying web-search operation returned a timeout and no component-specific result.

RFQ İletişim
LM358MX/NOPB - Dual 32-V 1-MHz Op Amp | Texas Instruments
LM358MX/NOPB

LM358MX/NOPB - Dual 32-V 1-MHz Op Amp | Texas Instruments

Texas Instruments LM358MX/NOPB is a dual, general-purpose operational amplifier designed for single-supply operation, with a 32 V maximum supply voltage, 1 MHz gain-bandwidth product, and an 8-pin SOIC package. It provides two amplifier channels for general-purpose signal processing, allowing a compact implementation of functions such as voltage amplification, buffering, filtering, and comparison. The device is identified by the manufacturer as a standard general-purpose amplifier suitable for instrumentation and low-frequency signal-processing applications. An operational amplifier is an active semiconductor device that uses high open-loop gain to amplify the difference between its two input terminals. When negative feedback is applied, the amplifier can create stable gain, improve input impedance, and reduce output impedance. The LM358MX/NOPB belongs to the broader hierarchy of operational amplifiers, analog amplifiers, and integrated analog ICs, with its dual-channel configuration reducing the component count when two independent amplifier functions are required. The principal headline specifications are a 32 V maximum supply voltage, 1 MHz gain-bandwidth product, and operation over a 0°C to 70°C temperature range. Its 8-pin SOIC package supports conventional surface-mount PCB assembly. The SOIC form factor is widely used for analog signal-conditioning boards because it provides a compact, standard footprint and can be placed alongside resistors, capacitors, and precision components in ordinary production layouts. Each amplifier channel includes true differential inputs, allowing a signal to be referenced between two input nodes rather than only against ground. Internal frequency compensation supports general-purpose feedback configurations without requiring an external compensation network in ordinary low-frequency designs. The two channels can be used independently, or they can participate in circuits such as instrumentation stages, active filters, comparators, and difference amplifiers, subject to the limits of the device and the external components. Typical applications include sensor-signal conditioning, low-frequency active filters, voltage followers, comparator circuits, audio preamplifier stages, and battery-powered instrumentation. The 3 V to 32 V supply capability is useful for systems operating from a single low-voltage rail as well as industrial boards with substantially higher supply voltage. Designers should still verify input and output common-mode limits, output-current capability, and stability with the actual external network before using the device outside its published operating region. For new layouts, follow the manufacturer's pin-description table and place input and output components close to the associated pins to minimize parasitic effects. Decoupling capacitors should connect to a low-impedance ground reference, while feedback components should be positioned to keep sensitive output routing away from high-impedance input nodes. This is especially important for sensor interfaces where cable capacitance or leakage current can disturb a high-impedance measurement node. This product page organizes the Texas Instruments LM358MX/NOPB specifications, practical use cases, pin information, and pin-compatible alternatives into a design-focused reference. It also highlights the distinctions engineers should evaluate when changing operational-amplifier suppliers: electrical limits, package details, temperature coverage, qualification, and confirmed pin compatibility should be reviewed before a substitution is approved.

RFQ İletişim
LM358N - Dual 32 V 1 MHz Op Amp | DIP-8 Amplifier
LM358N

LM358N - Dual 32 V 1 MHz Op Amp | DIP-8 Amplifier

The Texas Instruments LM358N is a dual, general-purpose operational amplifier with two independent amplifiers, a 32 V rating, 1 MHz typical bandwidth, and an 8-pin through-hole DIP package. It is designed for single-supply operation and is widely used where low cost, moderate precision, and straightforward dual-amplifier integration are more important than rail-to-rail input or output performance. An operational amplifier is an amplifier IC that uses high open-loop gain to amplify the difference between its non-inverting and inverting inputs. In feedback configurations, the LM358N can provide voltage gain, buffering, filtering, summing, and current-control functions. It belongs to the hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. The verified product information identifies the LM358-N as a dual, 32 V, 1 MHz op amp. The LM358N package is listed by distributors as an 8-pin mini-DIP or 8-pin PDIP package, depending on the manufacturer source. Because the supplied data does not include every electrical limit, several detailed parameters remain marked as data-needed rather than inferred. Each internal amplifier is designed for general-purpose signal conditioning. The device is suitable for industrial control, sensor interfaces, audio and communication circuits, power-control loops, transducers, and low-frequency analog signal chains. Its dual architecture reduces the number of IC packages required when two independent amplifier functions are needed. The most important design consideration is supply and input/output range. The 32 V maximum device rating does not mean every circuit should operate at 32 V. Designers must verify the selected manufacturer version, common-mode range, output swing, input bias behavior, noise, slew rate, and thermal limits before finalizing a design. The verified sources do not provide a complete, unified parameter table for this page. This page combines the verified manufacturer and distributor references, package references, and cross-reference search results with practical engineering guidance. It is intended to help engineers locate the datasheet, assess compatibility, and plan a validation review before purchasing or substituting LM358N.

RFQ İletişim
LM358N/NOPB - Dual 32V 1MHz Op Amp | Texas Instruments
LM358N/NOPB

LM358N/NOPB - Dual 32V 1MHz Op Amp | Texas Instruments

The Texas Instruments LM358N/NOPB is a dual, general-purpose operational amplifier rated for a 32 V maximum supply and 1 MHz gain-bandwidth, housed in an 8-pin PDIP package. The device contains two independent, high-gain, internally frequency-compensated amplifiers that can operate from a single power supply, making it suitable for cost-sensitive analog signal-conditioning designs that require basic voltage feedback rather than rail-to-rail input or output performance. An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM358 family belongs to the broader amplifier IC hierarchy: operational amplifier → voltage-feedback amplifier → analog amplifier IC → semiconductor. Its two channels can amplify independent signals, making one package more economical than using two single-amplifier packages when PCB area, component count, or assembly cost matters. Key features include two amplifiers in one package, a 32 V maximum supply rating, a 1 MHz gain-bandwidth product, and internal frequency compensation. Internal compensation removes the need for an external compensation network in the standard closed-loop configurations. The device is also designed for single-supply operation, which allows its input and output signals to be referenced to ground in many 5 V, 12 V, or 24 V systems. The PDIP-8 package supports through-hole assembly and hand rework. The LM358N/NOPB belongs to TI's LMx58-N low-power dual operational amplifier family. Its architecture trades precision and speed for broad supply-voltage compatibility, low power consumption, and straightforward implementation. At a 1 MHz gain-bandwidth product, it is suitable for audio, control, sensing, and buffering functions rather than high-speed signal conditioning. Its differential-input structure supports amplifier, comparator-style, feedback-control, and signal-conditioning arrangements when operated within its common-mode and output-swing limitations. Typical uses include DC motor and actuator feedback loops, industrial sensor interfaces, temperature and light sensor conditioning, audio preamplifier stages, active filters, sample-and-hold circuits, and low-frequency control systems. Two independent channels also support complementary functions such as sensing one input while amplifying another, or implementing a dual-stage signal-conditioning chain without adding another IC package. Design should begin with a supply that remains below the 32 V maximum and includes adequate bypass capacitance near the power pins. Check input common-mode range and output-voltage swing at the selected load before closing the feedback loop. Because this is not a rail-to-rail device, the usable input and output range is not automatically equal to the full supply rails. Confirm stability, output-current demand, and thermal conditions with the component-specific limits in the LMx58-N datasheet. This page combines manufacturer specifications, pin mapping, sourcing guidance, application analysis, and package-matched replacement options. It also distinguishes the genuine 8-pin PDIP alternatives from functional equivalents that require a different footprint, helping engineers make a PCB-safe decision before committing a replacement to production.

RFQ İletişim
LM358NG - Dual 1MHz Op Amp | onsemi | Signal Conditioning
LM358NG

LM358NG - Dual 1MHz Op Amp | onsemi | Signal Conditioning

onsemi LM358NG is a dual general-purpose operational amplifier with a 3 V to 32 V supply range, 1 MHz gain-bandwidth product, and 0.6 V/µs slew rate in an 8-pin PDIP package. The device provides two amplifier channels in one IC, uses a common-emitter output stage with capacitive load capability, and is designed for operation from either a single supply or split supplies. Its low-power architecture and input bias current of 100 nA make it suitable for battery-powered, industrial-control, sensor-conditioning, and general analog signal-processing circuits. An operational amplifier is an amplifier IC whose open-loop gain and feedback network determine the gain of a closed-loop circuit. The dual amplifier belongs to the hierarchy of analog amplifiers, signal-chain ICs, and semiconductors. Unlike a precision rail-to-rail amplifier, the LM358NG is primarily intended for conventional supply-voltage operation and can accept input common-mode voltages extending toward ground or the negative supply, VEE. This makes it useful in single-supply systems where signals remain near the lower supply rail. Key features include two amplifier sections, a 3 V to 32 V operating supply range, 1 MHz gain-bandwidth product, 0.6 V/µs slew rate, 100 nA input bias current, and 7 mV input offset voltage. The dual configuration reduces package count and board area when two independent analog functions are required. Commercial temperature operation is identified by the distributor listings, while the low-power drain supports battery-operated instrumentation where every milliampere affects useful runtime. The internal architecture provides useful behavior for low-frequency, cost-sensitive analog designs. Its approximately 1 MHz bandwidth permits operation well below audio frequencies and supports common feedback networks for amplification, filtering, comparison, and summing functions. The 0.6 V/µs slew rate is adequate for signals whose required full-scale transition time is not extremely short. As with any non-rail-to-rail amplifier, designers should verify input and output operating ranges against the actual supply voltages and signal amplitudes. Typical uses include low-side current sensing, sensor amplification, transducers, audio preamplifier stages, active filters, and general instrumentation. In a 5 V system, the dual structure can process two channels or use one section for filtering and the other for amplification. In split-supply circuitry, the common-mode input range extending toward ground or VEE supports bipolar-style signal conditioning without requiring a separate rail-to-rail input device. The primary design consideration is power-rail compatibility. The LM358NG supports 3 V to 32 V operation, but output swing and common-mode limits remain constrained by the supplies. PCB layout should keep input traces short, provide a solid ground plane, and place power-bypass capacitors close to the supply pins. Stable feedback components and adequate output isolation are also important when driving capacitive loads. This product page consolidates verified onsemi and distributor information, pricing context, package details, pin assignment, alternative-device guidance, and practical application notes. It is intended to help engineers evaluate whether the DIP-8 dual amplifier fits a new design or a repair before comparing it with other pin-compatible devices.

RFQ İletişim
LM358P - Dual 700kHz Operational Amplifier | Texas Instruments
LM358P

LM358P - Dual 700kHz Operational Amplifier | Texas Instruments

The Texas Instruments LM358P is a dual operational amplifier packaged in an 8-pin PDIP. Each of its two independent channels provides high voltage gain, internal frequency compensation, and operation from a single supply, with a verified operating range of 3 V to 32 V. The LM358 family is specified at 700 kHz gain-bandwidth product and 0.3 V/µs slew rate, making it a general-purpose choice for signal conditioning and amplifier stages that operate from a wide supply-voltage range. An operational amplifier, or op amp, is a voltage-controlled differential amplifier whose open-loop gain is intended to be shaped by external feedback. The LM358P contains two separate amplifier channels in one 8-pin package, reducing board area compared with two discrete single-channel devices. Internally frequency-compensated channels simplify closed-loop design by reducing the additional compensation work normally required for stable operation. Key features include two independent amplifier circuits, high gain, internal frequency compensation, single-supply operation, and a wide 3 V to 32 V supply range. The 700 kHz bandwidth supports general-purpose signal conditioning rather than high-speed precision work, while the 0.3 V/µs slew rate limits how quickly a large output transition can occur. These characteristics make the device suitable for conventional industrial and consumer analog signal paths operating from a single supply. The LM358P is offered in a through-hole PDIP package, which supports manual assembly, prototyping, educational designs, and repair work. The dual-channel configuration allows a board to implement two amplifier functions without using two separate packages. Because the verified data identifies the device as a standard general-purpose amplifier rather than a rail-to-rail precision op amp, applications requiring rail-to-rail input or output operation, low offset, or low noise should verify those requirements against the manufacturer datasheet before final design approval. Typical uses include single-supply buffer stages, sensor-signal conditioning, feedback amplifiers, integrators, comparators, and general analog control blocks. Two channels can also implement related functions such as an instrumentation-style buffer or a transimpedance amplifier, provided the designer accounts for the LM358P's input common-mode range, output swing, output-current capability, stability requirements, and noise characteristics. A key design consideration is power bypassing. Place the supply-decoupling capacitor close to the positive supply and ground pins, and keep feedback components and signal routing compact to minimize oscillation and pickup. Component selection should preserve useful loop gain and phase margin rather than relying only on nominal bandwidth. For applications with unusually high precision, very low noise, or demands for rail-to-rail operation, verify the complete electrical limits before committing to this device. This page consolidates the verified distributor and manufacturer information for LM358P, adds a pin-level package reference, compares documented drop-in candidates, and organizes practical sourcing and design guidance for engineers evaluating the Texas Instruments LM358P.

RFQ İletişim
LM358PE3 - Dual 700 kHz Op Amp in 8-PDIP | Texas Instruments
LM358PE3

LM358PE3 - Dual 700 kHz Op Amp in 8-PDIP | Texas Instruments

Texas Instruments LM358PE3 is a dual, general-purpose operational amplifier with a 3 V to 32 V supply range, 700 kHz gain-bandwidth product and 0.3 V/µs slew rate, housed in an 8-pin PDIP package. The device contains two independent, high-gain, internally frequency-compensated amplifiers capable of operating from a single supply or dual supplies. An operational amplifier is a high-gain differential-input semiconductor that compares two voltages and drives its output to amplify the difference between them. In the broader hierarchy, the LM358 is a dual operational amplifier, a general-purpose analog amplifier within the amplifier-IC and semiconductor categories. Its two independent channels can implement noninverting, inverting, summing, comparator, and feedback-control functions. The principal characteristics of the LM358PE3 are its 700 kHz gain-bandwidth product, 0.3 V/µs slew rate, low supply-current draw, high voltage capability and single-supply operation. The manufacturer describes the LM358 family as suitable for general-purpose signal conditioning when the circuit does not require rail-to-rail input or output swing. Its broad supply-voltage range permits use in 3 V, 5 V, 12 V and higher-rail systems when the individual channel remains within its operating limits. Each amplifier includes high gain and frequency compensation, allowing closed-loop operation without external compensation in many standard gain configurations. The 0.7 MHz bandwidth supports low-frequency signal paths more effectively than high-speed precision amplifiers, while the 0.3 V/µs slew rate limits large-signal response. Input offset voltage, input bias current, output-current capability and common-mode limits must be checked against the manufacturer datasheet for the chosen operating conditions. Typical applications include bridge and resistive sensor amplification, audio preamplification, low-frequency active filters, motor and actuator control loops, battery-powered monitoring, and general industrial signal conditioning. Two independent channels can process separate sensor signals or form the two halves of an instrumentation circuit, although common-mode and output-swing restrictions still apply. For reliable PCB implementation, preserve the manufacturer's recommended bypass capacitance, provide a low-impedance ground return, and keep feedback components close to the relevant amplifier pins. A socketed PDIP design is convenient for prototyping and repair, although a soldered package provides better mechanical reliability in production. This product page combines the LM358PE3's principal electrical characteristics with pin-level implementation guidance, application fit, drop-in alternatives and a side-by-side engineering comparison. These practical details help designers move from general amplifier selection to a reviewable circuit design.

RFQ İletişim
LM358PE4 - Dual 700 kHz Op Amp, 8-PDIP | Texas Instruments
LM358PE4

LM358PE4 - Dual 700 kHz Op Amp, 8-PDIP | Texas Instruments

Texas Instruments LM358PE4 is a dual general-purpose operational amplifier with a gain-bandwidth product of 700 kHz, a slew rate of 0.3 V/µs, and a supply range extending to ±16 V per rail, housed in an 8-pin PDIP package. The device contains two independent amplifiers, making it suitable for dual-channel signal conditioning, filtering, comparisons, and basic feedback-control circuits. An operational amplifier is a voltage-feedback analog IC that uses differential input voltage to produce an amplified output voltage. Operational amplifiers belong to the amplifier hierarchy, support precise closed-loop operation when paired with external resistors, and are widely used in industrial controls, sensor interfaces, audio electronics, and power-management systems. The LM358PE4 belongs to the industry-standard LM358 family and combines two amplifiers in one package. Key electrical characteristics include a typical input offset voltage of 300 µV, a low 0.7 mA supply-current drain that is independent of supply voltage, and a common-mode input voltage range that includes ground. These features suit battery-powered, sensor-driven, and single-supply circuits where low cost, ground-referenced inputs, and two amplifiers in one package are important. The device also supports high differential input voltage capability for cost-sensitive applications. The LM358PE4 uses a bipolar voltage-feedback architecture and is specified for general-purpose analog signal processing. Its 700 kHz gain-bandwidth product makes it suitable for low-frequency audio, control, and instrumentation tasks rather than high-speed precision applications. With a 0.3 V/µs slew rate, it can produce larger output transitions more slowly than modern rail-to-rail CMOS amplifiers, so designers should check bandwidth, output swing, and stability requirements before increasing closed-loop gain. Typical applications include two-channel sensor conditioning, low-frequency active filters, audio preamplification, comparators, and industrial control interfaces. In each case, the two amplifiers can process independent signals or form a cascaded signal chain. Stable operation also requires suitable bypassing, careful grounding, and output-load consideration because the LM358PE4 is not a rail-to-rail-input or rail-to-rail-output device. For single-supply designs, bias the non-inverting input above ground and use decoupling close to the supply pins. Check the common-mode and output-voltage limits against the actual signal range, and avoid relying on output saturation as a precise comparator function. Prototype the gain, slew rate, and capacitive-load behavior before committing a high-volume design. This page combines the manufacturer specifications, package and pin information, supported alternatives, application guidance, and design notes needed to evaluate the LM358PE4. It also organizes replacement and selection questions around the verified 8-PDIP footprint, 700 kHz bandwidth, 0.3 V/µs slew rate, and 36 V maximum total supply capability.

RFQ İletişim
LM358PSR - Dual Op Amp, 8-SO | Texas Instruments
LM358PSR

LM358PSR - Dual Op Amp, 8-SO | Texas Instruments

Texas Instruments LM358PSR is a standard, general-purpose dual operational amplifier packaged in an 8-SO surface-mount package. The device contains two amplifier circuits in one package, allowing designers to implement two independent analog signal-processing channels while reducing board area and component count. The LM358PSR designation identifies the Texas Instruments member of the widely used LM358 dual-operational-amplifier family. An operational amplifier is an analog integrated circuit that compares two input voltages and produces an output voltage determined by external feedback components. When configured with negative feedback, the closed-loop gain is established primarily by external resistors. Operational amplifiers can also be used as voltage buffers, comparators, current-to-voltage converters, instrumentation stages, and active filters. The LM358PSR therefore belongs to the broader hierarchy of analog ICs, amplifiers, voltage amplifiers, and general-purpose operational amplifiers. The principal feature of the LM358PSR is its dual-circuit integration. Two amplifiers in one package can simplify dual-channel signal conditioning, balanced sensing, feedback control, and audio or industrial analog interfaces. Its 8-SO package supports conventional surface-mount PCB assembly rather than through-hole insertion. Each amplifier requires suitable input and feedback components, and the circuit must remain within the voltage, current, temperature, and common-mode limits specified by the manufacturer datasheet. The LM358 family is widely encountered in general-purpose analog designs because one device can implement multiple common analog functions. Typical uses include amplifying sensor outputs, buffering inputs to analog-to-digital converters, driving slow-changing signals, forming difference-amplifier stages, and building active filtering or gain-control blocks. A dual package can reduce the number of IC footprints compared with two separate single amplifiers. Because the two circuits share one package, their power-supply connections, operating limits, thermal environment, and layout requirements are linked. Designers should place bypass capacitors near the supply pins, route sensitive input and feedback paths away from noisy switching nodes, and confirm that the amplifier remains stable with the selected output-load and feedback network. The manufacturer datasheet should guide the final supply, resistor, capacitor, and layout selections. This page brings together the LM358PSR package identity, commercially relevant sourcing questions, verified drop-in candidates, comparison points, and practical PCB guidance. It is intended to help engineers identify whether the dual 8-SO amplifier fits a board before finalizing component documentation, footprint checks, and prototype assembly.

RFQ İletişim
LM358PT - Dual 3-32V Op Amp, 1.1MHz | STMicroelectronics
LM358PT

LM358PT - Dual 3-32V Op Amp, 1.1MHz | STMicroelectronics

The STMicroelectronics LM358PT is a dual general-purpose operational amplifier containing two independent, internally frequency-compensated amplifiers. Its 3 V to 32 V single-supply operating range, 1.1 MHz unity-gain bandwidth, 100 dB DC voltage gain, and low input common-mode voltage of 0.6 V make it suitable for general signal conditioning. The device is supplied in an 8-pin TSSOP surface-mount package. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LM358 belongs to the dual-operational-amplifier category within the broader amplifier IC and analog semiconductor hierarchy. Its two independent channels can amplify AC or DC signals, buffer inputs, perform comparisons, and support feedback-based circuit functions. Internal frequency compensation simplifies stable operation without an external compensation network. The principal features of the LM358PT include two amplifier channels in one package, a wide 3 V to 32 V supply range, 1.1 MHz unity-gain bandwidth, and 100 dB large-signal DC voltage gain. Internally compensated operation supports practical use without external compensation capacitors. The 8-pin TSSOP package also provides a compact surface-mount option for industrial control, instrumentation, sensor interfaces, and consumer equipment where board area matters. Technically, the LM358PT is designed for single-supply operation while accepting input signals close to the lower supply rail. The verified 0.6 V input common-mode figure gives designers a concrete limit when working from a 3 V or 5 V rail. Its bandwidth is sufficient for many audio, control, and instrumentation signals, but it is not a high-speed precision op amp. Applications requiring very low offset, very low noise, rail-to-rail output, fast slew rate, or high DC accuracy should be reviewed against the device limits before production release. Typical uses include sensor-signal conditioning, active filtering, transducers, relay and solenoid drivers, audio and communications interfaces, and general control loops. The two channels can process related signals in a compact circuit or implement separate functions. Because output-current capability and slew-rate limits remain important in real designs, the load should be checked against the manufacturer's operating information rather than assumed from the wide supply range. A key design consideration is input common-mode range: the LM358PT can operate from 0.6 V above the negative supply, but it does not provide true rail-to-rail input or output swing. Designers should also account for the effects of supply bypassing, output loading, stability with capacitive loads, and the power dissipation created by the voltage difference across each amplifier. This product record combines manufacturer and distributor information with a practical selection guide, package-aware alternatives, comparison parameters, and implementation notes. It is intended to help engineers confirm footprint, electrical fit, sourcing status, and application suitability before selecting LM358PT for a PCB redesign or new design.

RFQ İletişim
LM358PW - Dual 16-32V Op Amp | Texas Instruments
LM358PW

LM358PW - Dual 16-32V Op Amp | Texas Instruments

The Texas Instruments LM358PW is a dual general-purpose operational amplifier with two independent amplifier circuits, a wide ±16 V to ±32 V supply range, and an 8-pin TSSOP package. Designed for low-power consumption and high open-loop gain, it is suitable for signal conditioning, feedback control, and analog signal amplification across industrial, consumer, and instrumentation systems. Each amplifier can operate from a single supply or from split positive and negative supplies. An operational amplifier is an analog semiconductor that uses high-gain differential feedback to amplify the difference between two input voltages. The LM358 belongs to the dual operational-amplifier, voltage-feedback, analog IC, and power-management signal-chain hierarchies. Its two channels share common supply pins but otherwise provide independent amplifier functions, allowing one package to implement two signal-processing paths. The principal advantages of the LM358PW are its dual-channel integration, low-power operation, high gain, broad supply-voltage range, and established industry-standard pin arrangement. The TSSOP-8 footprint saves board area compared with larger dual-op-amp packages, while two channels reduce the component count in designs that require duplicated gain or buffering stages. These characteristics make the device a practical baseline for general-purpose analog designs. Its architecture is suited to voltage-feedback applications in which the amplifier operates with external negative feedback. The package provides separate inputs and outputs for both channels, while the power terminals are shared. Designers should account for input common-mode limits, output swing, bias current, noise, slew rate, stability, and load capability when setting the operating point; consult the manufacturer datasheet for exact limits and test conditions before finalizing a circuit. Typical applications include DC signal conditioning in sensor interfaces, closed-loop control for industrial equipment, audio preamplification, analog sensor amplification, and general buffer stages. The two-amplifier configuration is especially useful when a board needs one channel for signal amplification and another for filtering, level shifting, active feedback, or output buffering. The primary design consideration is circuit stability. Feedback-network values, source and load impedances, output loading, and supply bypass capacitance affect closed-loop performance. Place the required decoupling capacitor close to the supply pins, use short feedback paths, and verify common-mode and output-swing margins across the intended input range. Add input or output protection when external wiring can introduce transients beyond the device ratings. This product page combines the manufacturer product description, distributor package and catalog information, documented cross-reference candidates, and practical application guidance. It also highlights the distinction between electrically similar devices and true TSSOP-8 drop-in options, helping engineers evaluate footprint compatibility, temperature behavior, supply range, and channel-level performance before redesigning an existing PCB.

RFQ İletişim
LM358PWG4 - Dual 700kHz Op Amp, 16V, TSSOP-8 | Texas Instruments
LM358PWG4

LM358PWG4 - Dual 700kHz Op Amp, 16V, TSSOP-8 | Texas Instruments

The Texas Instruments LM358PWG4 is a dual general-purpose operational amplifier with two independent amplifiers, 700 kHz gain-bandwidth product, and 0.3 V/us slew rate. Designed for single or dual supply operation, it accepts a 3 V to 32 V total supply range and is packaged in an 8-pin TSSOP. The LM358PWG4 is supplied in tube packaging for a 0°C to 70°C commercial operating-temperature grade. An operational amplifier is an analog signal-processing IC that compares its inverting and non-inverting inputs and amplifies the voltage difference between them. Within the broader semiconductor hierarchy, an op amp is an amplifier IC and part of the analog signal-conditioning family. The dual configuration in the LM358PWG4 places two general-purpose amplifiers in one package, reducing component count and board area in designs that need two similar signal-processing channels. The key operating characteristics are a 700 kHz gain-bandwidth product, 0.3 V/us slew rate, and operation from 3 V to 32 V. The documented output-swing range extends from approximately ±1.5 V to ±16 V depending on supply conditions and load. Its general-purpose architecture makes it suitable for conventional amplifier, comparator, summing, and feedback applications where moderate bandwidth and broad supply compatibility are more important than rail-to-rail input or output operation. The LM358 family is particularly useful when two independent channels can share a common supply. Because both amplifiers are in the same package, board designers can shorten supply routing and maintain symmetrical placement of the two channels. The 8-pin TSSOP package also supports compact PCB construction, although its narrow lead pitch requires careful assembly and adequate solder-joint inspection. Typical uses include audio preamplification, sensor-signal conditioning, low-frequency active filters, comparators with pull-up resistors, and general instrumentation. In these applications, the 700 kHz bandwidth handles low- and mid-frequency signals, while the 0.3 V/us slew rate helps control distortion for moderate-amplitude signals. The broad 3 V to 32 V supply range also supports both low-voltage portable systems and higher-voltage industrial control systems. Designers should evaluate output swing, input common-mode range, bias current, offset voltage, noise, and stability for the exact operating conditions before assigning gain or filter coefficients. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased so they remain in a defined common-mode state. The two channels are independent, but sharing a package does not guarantee matched behavior. This product page combines the verified LM358PWG4 electrical and packaging characteristics with application guidance, replacement considerations, and practical selection criteria. It helps engineers identify where the dual 700 kHz amplifier, 3 V to 32 V supply capability, and compact TSSOP-8 package provide useful design advantages without overlooking rail-range or precision requirements.

RFQ İletişim
LM358PWR - Dual Op Amp, 700kHz, TSSOP-8 | Texas Instruments
LM358PWR

LM358PWR - Dual Op Amp, 700kHz, TSSOP-8 | Texas Instruments

The Texas Instruments LM358PWR is an industry-standard dual operational amplifier integrating two general-purpose op-amp circuits in a single 8-pin TSSOP (PW) surface-mount package. Each amplifier offers a 700 kHz gain-bandwidth product, a 0.3 V/us slew rate, and operates from supply rails of ±1.5 V to ±16 V (or a single supply from 3 V to 32 V), making it one of the most widely deployed analog building blocks in electronics. A dual operational amplifier is an analog integrated circuit that combines two independent, internally frequency-compensated, high-gain voltage amplifiers on one die. In the signal-chain hierarchy, an op amp is a foundational linear amplifier used to build gain stages, filters, comparators, integrators, current sinks, and voltage followers; the dual format halves board space and sharing one bias network improves thermal matching between channels. Key features of the LM358PWR include common-mode input range extending to ground (a single-supply capability that many older op amps lack), high differential input voltage capability, and operation across both single and split supplies. The TSSOP-8 package measures roughly 6.4 mm x 4.4 mm with a 0.65 mm pitch, supporting compact surface-mount assemblies. Architecturally, the LM358 uses an internally compensated bipolar design with a PNP differential input stage referenced to the negative rail, which is what allows inputs to operate down to 0 V in single-supply systems. The output stage sources and sinks current with a characteristic output swing that reaches near the negative rail. Typical applications include transducer amplification, DC gain blocks, active filters, voltage comparators, LED drivers, and sensor signal conditioning in industrial controls, consumer appliances, and automotive body electronics (where the related LM2904 variant is common). A key design consideration: the input offset voltage of the bipolar LM358 input stage (typically a few millivolts) limits precision; for sub-millivolt accuracy, consider the next-generation LM358B, which shares the same pinout with improved specifications. This page consolidates verified specifications, pin-to-pin alternatives, application guidance, and design notes in one place - content that goes beyond what a raw datasheet listing provides.

RFQ İletişim
LM358PWRG3 - Dual 16V 700kHz Op Amp | Texas Instruments
LM358PWRG3

LM358PWRG3 - Dual 16V 700kHz Op Amp | Texas Instruments

Texas Instruments LM358PWRG3 is a standard general-purpose dual operational amplifier with two amplifier circuits, a 700 kHz gain-bandwidth product, and a 16 V maximum supply rating. It is packaged in an 8-TSSOP for surface-mount assembly. The LM358 family is a widely used general-purpose op-amp platform for low-frequency analog signal conditioning, sensor interfaces, and basic amplifier configurations. An operational amplifier is a high-gain, differential-input analog IC used to amplify voltage differences. In its broader hierarchy, an operational amplifier belongs to the amplifier-IC and analog-signal-chain categories. A dual op amp integrates two amplifier channels into one package, allowing a design to use both channels for related tasks such as signal conditioning, buffering, filtering, or feedback control. The LM358PWRG3 combines that two-channel architecture with a compact TSSOP-8 footprint. The identified part is a standard, general-purpose device rather than a rail-to-rail precision amplifier. Its stated 700 kHz gain-bandwidth product supports applications where the closed-loop bandwidth is substantially lower after accounting for the selected noise gain. The 16 V maximum supply rating places the device in the single-supply operating class shown by the product listing. Tape-and-reel packaging supports automated pick-and-place and high-density PCB assembly. The dual-channel organization can reduce component count when a board needs two related amplifier functions. One channel might condition a sensor output while the other provides buffering or active feedback, although the final circuit must satisfy the device's input, output, common-mode, stability, and load requirements described in the manufacturer datasheet. The 8-TSSOP package offers a smaller board area than an SOIC-8 package, but its lead pitch requires careful component placement and assembly planning. Typical application areas include transducer signal conditioning, low-frequency closed-loop control, analog sensor interfaces, active filters, and general buffer or gain stages. In a sensor interface, the op amp may amplify a small differential signal before downstream conversion. In a filter, its gain and bandwidth behavior participate in setting the transfer function. In a feedback-control circuit, the dual package can support related signal paths without requiring two separate single-channel packages. Designers should follow the manufacturer datasheet for the complete electrical limits, pin assignments, common-mode range, output-swing limits, input-bias-current behavior, noise characteristics, and recommended operating conditions. Decoupling and layout decisions should be based on the intended circuit topology, especially when the amplifier drives capacitive loads or operates close to supply rails. PCB signal-return paths should remain short and preserve a low-impedance ground connection. This page combines the exact package and headline device information with practical selection guidance, verified source links, an explicit data-completeness assessment, and engineering-focused application notes. It also distinguishes pin-compatible alternatives from broader functional equivalents so engineers can make a replacement decision without assuming that similar amplifier performance guarantees footprint, bias, stability, or operating-range compatibility.

RFQ İletişim
LM358PWRG4 - Dual 700 kHz Op Amp, 30 V, TSSOP-8 | TI
LM358PWRG4

LM358PWRG4 - Dual 700 kHz Op Amp, 30 V, TSSOP-8 | TI

Texas Instruments LM358PWRG4 is a dual general-purpose operational amplifier with two independent amplifiers, 30 V maximum supply capability, 700 kHz gain-bandwidth product, and an 8-pin TSSOP package. The LM358PWRG4 is designed for cost-sensitive applications requiring one amplifier that can operate from a single supply, accept input signals near ground, and provide reasonably wide common-mode input range. Both channels share the same supply pins and are not intended for direct parallel operation. An operational amplifier is a high-gain differential amplifier used to compare, amplify, filter, buffer, or scale signals. The LM358 belongs to the operational-amplifier hierarchy within analog signal-chain ICs and broader semiconductor devices. Its internal frequency compensation removes the need for an external compensation capacitor in most closed-loop configurations, simplifying PCB layout and reducing the component count in cost-sensitive industrial, consumer, instrumentation, and control designs. The principal features of the LM358PWRG4 include a dual-amplifier configuration, 700 kHz gain-bandwidth product, 0.3 V/us slew rate, 3 V typical low supply-current drain, approximately 3 mV typical input offset voltage, and approximately 2 nA typical input offset current. Its common-mode input range can include ground, making it useful in single-supply sensor interfaces where the signal begins near 0 V. The 30 V maximum supply rating provides additional operating margin compared with devices limited to lower supply voltages. Internally, the LM358 uses a bipolar transistor input and output stage optimized for economy and supply-voltage flexibility rather than rail-to-rail input or output operation. The amplifiers are frequency-compensated for stable operation with external feedback networks. Because output swing and input common-mode range are not rail-to-rail, a designer should check the signal amplitudes and output voltage required by the selected feedback network, especially with low supply voltages. Typical uses include low-cost sensor-signal conditioning, current-loop and grounded-transducer interfaces, audio preamplification, voltage comparators, active filters, motor and relay control, industrial equipment, and general-purpose analog modules. The TSSOP-8 footprint supports compact, high-density PCB layouts, while the dual channel can implement two matched amplifier functions or one differential amplifier followed by a separate amplifier stage. The main design consideration is supply headroom. Check input common-mode limits, differential input limits, output swing, load capability, and stable feedback gain for the actual supply voltage. Place bypass capacitors close to the supply pins and maintain a short, quiet output path, especially when the amplifier drives a long trace or an ADC input. Because the part is listed at last-time-buy status, production designs should evaluate an explicitly qualified second source rather than assume unlimited lifecycle availability. This page combines the exact LM358PWRG4 ordering information, technical characteristics, lifecycle status, package details, and engineering guidance into one purchasing reference. It also identifies same-footprint alternatives and explains where analog-performance qualification must be checked before substitution.

RFQ İletişim
LM358PWRG4-JF - Dual 30V 700kHz Op Amp | Texas Instruments
LM358PWRG4-JF

LM358PWRG4-JF - Dual 30V 700kHz Op Amp | Texas Instruments

Texas Instruments LM358PWRG4-JF is a dual, general-purpose bipolar operational amplifier with a 30 V power-supply rating, 700 kHz gain-bandwidth product, and two amplifier circuits in an 8-pin TSSOP (PW) package. The device operates from single or dual supplies, with listed operating ratings of 0°C to 70°C and a maximum input offset voltage of 9,000 µV. An operational amplifier is an analog semiconductor that amplifies the voltage difference between its two inputs. The LM358 belongs to the dual-operational-amplifier hierarchy within the broader voltage-feedback amplifier, analog IC, and semiconductor categories. Its two channels may be used independently, or one channel can provide amplification while the other performs a related task such as buffering, level shifting, or active filtering. The LM358PWRG4-JF provides a 30 V maximum supply voltage, 700 kHz gain-bandwidth product, and bipolar input and output stages. A 700 kHz bandwidth supports general-purpose signal conditioning across audio, industrial-control, instrumentation, and data-acquisition circuits. The 9,000 µV maximum input offset voltage is appropriate for applications in which moderate DC offset does not dominate the measurement or control accuracy. The dual configuration offers better functional density than two single amplifiers. Its 8-pin TSSOP package supports compact surface-mount assembly, while the two amplifier sections make it practical to process related signals with one component. Designers should still account for common-mode range, output swing, input bias current, stability, noise, and supply bypass requirements when defining an exact application. Typical uses include low-frequency audio amplification, sensor-signal conditioning, DC error amplification, active filtering, comparators with open-collector outputs, and general industrial analog interfaces. The wide 30 V supply capability is useful where the signal chain operates above conventional 5 V or 12 V rails, provided the common-mode and output-swing limits of the selected amplifier remain satisfied. For implementation, decouple each supply rail close to the device with suitable bypass capacitance and route feedback components to minimize parasitic coupling. Keep output loads within the specified range, avoid violating common-mode limits, and check stability when driving capacitive loads. The 0°C to 70°C rating makes this ordering appropriate for commercial-temperature environments rather than extended industrial or automotive temperature ranges. This page combines the manufacturer identification, distributor technical attributes, package details, replacement considerations, and practical application guidance for engineers evaluating the LM358PWRG4-JF. It also highlights the need to distinguish electrically similar LM358 order codes from confirmed, pin-compatible alternatives before changing a released PCB design.

RFQ İletişim
LM358QDRQ1 - Automotive Dual 1MHz Op-Amp SOIC-8 | Texas Instruments
LM358QDRQ1

LM358QDRQ1 - Automotive Dual 1MHz Op-Amp SOIC-8 | Texas Instruments

The Texas Instruments LM358QDRQ1 is an automotive-grade, dual general-purpose operational amplifier qualified to AEC-Q100, delivered in an 8-pin SOIC (0.154 inch, 3.90 mm width) package on tape and reel. Each of the two amplifier channels offers a gain bandwidth product of approximately 1 MHz with rail-friendly output swing suited to single-supply operation, making it a workhorse signal-conditioning amplifier for 12V automotive and 5V industrial systems. An operational amplifier (op-amp) is a high-gain voltage amplifier with differential inputs and a single-ended output; within the component hierarchy it belongs to the amplifier IC family, under integrated circuits, and is a core building block of analog signal chains. Dual op-amps such as the LM358-Q1 integrate two independent channels in one package, halving board area versus two single amplifiers while sharing supply rails. Key features include two independent amplifier circuits, a 1 MHz class gain bandwidth, low input offset suitable for general-purpose sensing, operation from single or dual supplies, and AEC-Q100 automotive qualification with temperature grading that supports harsh under-hood environments. The wide supply range allows direct interfacing with battery-backed rails and regulated 5V logic domains. Architecturally, the LM358-Q1 family traces to the classic LM358 bipolar design updated for automotive quality systems, with TI manufacturing controls per its automotive flow; the related LMV358-Q1 variant adds rail-to-rail output for low-voltage rails per the LMV321-Q1/LMV358-Q1/LMV324-Q1 datasheet. Typical applications include automotive sensor signal conditioning, current-sense amplification front-ends, active filters, comparators and level shifters, and battery-management monitoring stages in vehicle ECUs and industrial controllers. Design tip: with a 1 MHz GBW, keep closed-loop gains modest (10x or below) to preserve bandwidth and phase margin; check the output swing versus load, since the classic LM358 output does not reach the positive rail.

RFQ İletişim
LM358QT - Dual Op-Amp 1.1MHz DFN-8 | STMicroelectronics
LM358QT

LM358QT - Dual Op-Amp 1.1MHz DFN-8 | STMicroelectronics

The STMicroelectronics LM358QT is a low-power dual operational amplifier integrating two independent, high-gain, internally frequency-compensated op-amp circuits in an 8-pin UFDFN exposed-pad package measuring 2x2 mm. It delivers a gain-bandwidth product of 1.1 MHz (temperature compensated), a slew rate of 0.6 V/us, and a large DC voltage gain of 100 dB, operating from a single supply of 3 V to 30 V or dual supplies of +/-1.5 V to +/-15 V. An operational amplifier is a high-gain DC-coupled voltage amplifier with differential inputs and a single-ended output. As a member of the linear amplifier / signal conditioning IC family within analog semiconductor hierarchy, the general-purpose dual op-amp is one of the most widely used building blocks in electronics, performing amplification, active filtering, buffering, level shifting, and comparator-like threshold detection in virtually every analog signal chain. Key differentiating features include internally frequency compensation (no external compensation components required), very low supply current per amplifier for battery-powered designs, low input bias current of 20 nA, and unity-gain stability across the full industrial temperature span. The wide 3 V to 30 V single-supply range allows direct operation from logic supplies or automotive rails through simple regulation. Architecturally, the LM358QT consists of two independent, high-gain op amps sharing a common supply pin pair. The internally compensated bipolar design guarantees stability at unity gain without external capacitors, while the exposed-pad DFN-8 package provides a low thermal resistance path to the PCB, supporting compact, high-density layouts where SOIC-8 footprints are too large. Typical applications include transducer amplifiers and sensor signal conditioning, DC gain blocks and active filters in industrial controls, and battery-powered consumer or portable instrumentation where quiescent drain matters. It also serves as a summing amplifier, integrator, or voltage follower in general-purpose analog front ends. Design consideration: as a general-purpose bipolar-input op amp, the LM358QT is not a precision part; for microvolt-level offset or high-speed requirements, select a dedicated precision or high-bandwidth amplifier. Ensure the common-mode input range and output swing limitations near the rails are respected in single-supply designs. This page consolidates verified datasheet parameters, drop-in alternatives, pricing context, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
LM358S-13 - Dual Low-Power Op Amp, 3-32V | Diodes Incorporated
LM358S-13

LM358S-13 - Dual Low-Power Op Amp, 3-32V | Diodes Incorporated

Diodes Incorporated LM358S-13 is a dual, low-power operational amplifier containing two independent high-gain, internally frequency-compensated amplifiers. It operates from a single supply over a 3 V to 32 V range, provides a gain bandwidth of 100 dB as identified by Mouser, and is packaged in an 8-pin surface-mount SO package. The two amplifier channels can be used independently for signal conditioning, voltage comparison, feedback control, or general-purpose analog functions. An operational amplifier is an analog signal-processing IC that compares voltages applied to its inverting and non-inverting inputs and amplifies the difference between them. The LM358 family belongs to the dual operational amplifier category within the broader hierarchy of amplifiers, analog ICs, and semiconductor devices. Its internally compensated architecture simplifies closed-loop design because no external compensation components are required for ordinary voltage-feedback operation. The principal benefits of the LM358S-13 are its wide single-supply operating range, dual-channel integration, low-power designation, and internally frequency-compensated architecture. Two independent amplifiers in one package reduce component count and board area compared with two separate single operational amplifiers. Its 3 V minimum supply supports lower-voltage systems, while the 32 V maximum permits connection to conventional higher-voltage industrial rails when appropriate protection and signal limits are respected. The LM358 series was designed specifically for operation from a single power supply. In a single-supply circuit, the common or supply-return node is the reference for signal inputs, so input and output voltages must remain within the device's operating limits. Grounding inputs near the common node is important when processing small signals because the output cannot swing below the lower rail. The second amplifier can complement the first as an inverter, comparator, transimpedance amplifier, or buffer in the same package. Typical applications include low-voltage sensor interfaces, DC signal amplification, threshold detection, loop-error amplification, transducer buffering, and general dual-channel analog conditioning. The 8-pin SO package is suitable for compact surface-mount PCB assemblies, although exact connector and test-point placement should follow the manufacturer's pin configuration. Decoupling capacitors should be placed close to the supply pins, and sensitive analog traces should remain away from switching nodes and high-current return paths. Design trade-offs must be checked against the complete electrical characteristics before production use. In particular, input common-mode range, output swing, input bias current, input offset voltage, supply-current behavior, noise, and output-current capability determine whether a particular application is electrically suitable. This page combines the confirmed product identity and electrical headline values with package guidance, drop-in comparison information, application patterns, and practical layout recommendations for faster engineering evaluation.

RFQ İletişim
LM358SNG - Dual Op-Amp, 3-32V, 8-PDIP | onsemi
LM358SNG

LM358SNG - Dual Op-Amp, 3-32V, 8-PDIP | onsemi

The onsemi LM358SNG is a single-supply dual operational amplifier with two independent general-purpose amplifier circuits in an 8-pin PDIP (0.300 in, 7.62 mm) package. It operates from a 3V to 32V single supply (or ±1.5V to ±16V dual supplies) and features a low input bias current of 45 nA, making it a classic value-line bipolar op-amp for cost-sensitive analog designs. A general-purpose operational amplifier is an analog building block that amplifies the voltage difference between its two inputs with high open-loop gain and is configured for gain, filtering, buffering, or comparison through external passive components. Op-amps sit at the core of the analog signal chain hierarchy: op-amp -> amplifier IC -> linear/analog IC -> semiconductor, and the LM358 family was the first industry-standard dual op-amp optimized for single-supply operation. Key features include dual matched amplifiers sharing one bias network for low offset drift, an input common-mode range that includes ground (true single-supply capability), and wide supply operation from 3V to 32V. The two circuits are internally matched, which reduces quiescent power per amplifier and simplifies dual-channel designs on a single rail. Technically, the LM358SNG uses bipolar process technology with internal frequency compensation, so it is unity-gain stable without external capacitors. The output stage can source and sink current to ground on a single rail, though output swing is limited to within roughly one diode drop of the negative rail. This makes it well suited to low-frequency analog front ends rather than high-speed signal processing. Typical applications include transducer signal conditioning, DC gain blocks and active filters, voltage comparators and level detection, current sensing on single-supply microcontroller boards, and audio preamp stages in battery-powered equipment where a single positive rail must be used. When designing with this device, reserve gain-bandwidth-limited topologies to audio-range frequencies and always provide a supply decoupling capacitor close to pin 8. For precision designs, verify input offset voltage over temperature because value-line bipolar input stages drift more than modern precision CMOS parts. This page synthesizes distributor availability, drop-in alternatives, package pinout, and practical design notes in one place, going beyond a plain datasheet listing.

RFQ İletişim
LM358ST - Dual General-Purpose Op Amp | STMicroelectronics
LM358ST

LM358ST - Dual General-Purpose Op Amp | STMicroelectronics

STMicroelectronics LM358ST is a dual, general-purpose operational amplifier with two independent, internally frequency-compensated amplifiers, an 800 kHz gain-bandwidth product, and an 8-TSSOP package. The device operates from a single power supply over a wide voltage range and is also specified for operation at supply voltages up to ±16 V, corresponding to a total supply range of 32 V. An operational amplifier is an analog signal-conditioning IC that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. The LM358 belongs to the general-purpose operational-amplifier family, which sits within the broader amplifier IC and semiconductor hierarchy. Its two independent channels allow one package to provide separate amplification paths for sensors, control loops, audio stages, or general analog signal processing. The principal features of the LM358ST include two independent amplifier circuits, internally integrated frequency compensation, a common-mode input range that includes ground, and low-power operation from a single supply. The 800 kHz bandwidth supports general-purpose closed-loop signal paths without requiring an external compensation network. Its 8-pin TSSOP format provides a compact surface-mount option for mixed-signal boards with limited routing area. Each channel uses a differential input stage and an internally compensated voltage-feedback architecture. Because the channels are independent, one can amplify a sensor signal while the other performs filtering, comparison, level conversion, or feedback control. Common-mode operation near ground is particularly useful for circuits powered from a single positive rail, where input signals may remain close to 0 V. Designers should still verify input and output swing against the specific supply voltage used in the final circuit. Typical uses include low-side current sensing, sensor amplification, audio and communications interfaces, industrial control, and embedded instrumentation. In an STM32-based measurement system, the two channels can condition separate analog inputs before conversion by the microcontroller. The device can also implement active filters or comparators because its outputs can typically swing close to ground when operated from a positive single supply. For PCB design, place input resistors, feedback components, and bypass capacitors close to the relevant pins to reduce parasitic feedback and noise pickup. A local supply decoupling capacitor should be positioned near pin 8, with the ground return routed directly to pin 4. Check input common-mode voltage, output swing, stability with the intended feedback network, and channel thermal dissipation before committing the layout. This product page combines the exact LM358ST package and electrical identity with sourcing guidance, genuine drop-in options, pin assignments, and practical application notes. It is intended to help engineers compare footprint, function, supply range, bandwidth, and design constraints faster than a raw distributor listing while preserving manufacturer datasheet requirements for final qualification.

RFQ İletişim