LM358N/NOPB - Dual 32V 1MHz Op Amp | Texas Instruments
MPN: LM358N/NOPB ✓ AktifLM358N/NOPB Genel Bakış
An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM358 family belongs to the broader amplifier IC hierarchy: operational amplifier → voltage-feedback amplifier → analog amplifier IC → semiconductor. Its two channels can amplify independent signals, making one package more economical than using two single-amplifier packages when PCB area, component count, or assembly cost matters.
Key features include two amplifiers in one package, a 32 V maximum supply rating, a 1 MHz gain-bandwidth product, and internal frequency compensation. Internal compensation removes the need for an external compensation network in the standard closed-loop configurations. The device is also designed for single-supply operation, which allows its input and output signals to be referenced to ground in many 5 V, 12 V, or 24 V systems. The PDIP-8 package supports through-hole assembly and hand rework.
The LM358N/NOPB belongs to TI's LMx58-N low-power dual operational amplifier family. Its architecture trades precision and speed for broad supply-voltage compatibility, low power consumption, and straightforward implementation. At a 1 MHz gain-bandwidth product, it is suitable for audio, control, sensing, and buffering functions rather than high-speed signal conditioning. Its differential-input structure supports amplifier, comparator-style, feedback-control, and signal-conditioning arrangements when operated within its common-mode and output-swing limitations.
Typical uses include DC motor and actuator feedback loops, industrial sensor interfaces, temperature and light sensor conditioning, audio preamplifier stages, active filters, sample-and-hold circuits, and low-frequency control systems. Two independent channels also support complementary functions such as sensing one input while amplifying another, or implementing a dual-stage signal-conditioning chain without adding another IC package.
Design should begin with a supply that remains below the 32 V maximum and includes adequate bypass capacitance near the power pins. Check input common-mode range and output-voltage swing at the selected load before closing the feedback loop. Because this is not a rail-to-rail device, the usable input and output range is not automatically equal to the full supply rails. Confirm stability, output-current demand, and thermal conditions with the component-specific limits in the LMx58-N datasheet.
This page combines manufacturer specifications, pin mapping, sourcing guidance, application analysis, and package-matched replacement options. It also distinguishes the genuine 8-pin PDIP alternatives from functional equivalents that require a different footprint, helping engineers make a PCB-safe decision before committing a replacement to production.
Drop-in alternatifler için LM358N/NOPB — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LM358N/NOPB (aynı form faktörü ve ayağa oturma) — farklı olan Supply Configuration, Package, Amplifier Count, Compensation, Input Type.
LM358AN/NOPB
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →RC4558N
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LM358N
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM358N
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LM2904N
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MM358N
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LM358N/NOPB Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Dual operational amplifier |
| Number of Amplifiers | 2 channels |
| Maximum Supply Voltage | 32 V |
| Gain-Bandwidth Product | 1 MHz |
| Supply Configuration | Single supply |
| Compensation | Internal frequency compensation |
| Paket | 8-pin PDIP |
| Montaj Türü | Through-hole |
LM358N/NOPB Pin Yapısı
| Pin 1 | OUT1 — Output of amplifier 1 |
| Pin 2 | IN1− — Inverting input of amplifier 1 |
| Pin 3 | IN1+ — Non-inverting input of amplifier 1 |
| Pin 4 | GND — Ground connection |
| Pin 5 | IN2+ — Non-inverting input of amplifier 2 |
| Pin 6 | IN2− — Inverting input of amplifier 2 |
| Pin 7 | OUT2 — Output of amplifier 2 |
| Pin 8 | V+ — Positive supply connection |
Tipik Uygulamalar
LM358N/NOPB için uygundur 6 uygulamas: Industrial Sensor Signal Conditioning, Audio Preamplifier, Motor and Actuator Feedback, Active Filter and Signal Conditioning, Power-Supply Monitoring, Portable Measurement and IoT Interfaces.
Industrial Sensor Signal Conditioning
The LM358N/NOPB fits industrial sensor interfaces that require two independent amplifier stages on a 12 V or 24 V supply. Its 32 V maximum supply provides useful design margin, and the 1 MHz gain-bandwidth product is more than adequate for common temperature, pressure, and position sensors operating at low-to-moderate frequencies. One channel can amplify the sensor output while the other provides buffering or level conditioning. Because the device is not rail-to-rail, the engineer must verify that the sensor output and amplified result remain inside the specified common-mode and output-swing limits.
Önerilen
Audio Preamplifier
The two channels in the LM358N/NOPB can implement a stereo audio preamplifier or a microphone and auxiliary-signal conditioning pair. The 1 MHz gain-bandwidth product supports audio-band amplification, while the internal compensation avoids an external stability network in conventional inverting and non-inverting configurations. A 12 V or 24 V implementation also places the device within its 32 V maximum supply. Output clipping and common-mode limits should still be evaluated at the intended signal level, because the amplifier does not provide rail-to-rail input or output operation.
Önerilen
Motor and Actuator Feedback
The LM358N/NOPB is suitable for low-frequency motor and actuator feedback loops because its 1 MHz gain-bandwidth product and internal compensation support straightforward closed-loop amplifier configurations. A 24 V industrial control supply remains below the device's 32 V maximum. Two channels can process a command signal and a feedback signal or provide error amplification in two related loops. The design must account for output-current demand, load capacitance, output swing, and stability when driving downstream circuitry rather than treating the bandwidth specification as a complete load-capability guarantee.
Önerilen
Active Filter and Signal Conditioning
The LM358N/NOPB can implement first-order active filters, amplifiers, and buffers in low-frequency measurement systems. Its dual-channel architecture reduces the number of packages needed when a signal must be filtered and then buffered or inverted. The 1 MHz gain-bandwidth product is well matched to audio and low-frequency industrial signals, while a single positive supply simplifies system power. Component tolerances, noise, output loading, and the amplifier's input and output limits should be evaluated during simulation to ensure useful gain and phase margin.
Önerilen
Power-Supply Monitoring
The LM358N/NOPB can monitor a power rail by comparing a divided reference against a sensed voltage and driving a status or control signal. Its 32 V maximum supply suits many 12 V and 24 V industrial rails, and the two channels can monitor positive and negative conditions or provide an additional buffered reference. Because it is a single-supply, non-rail-to-rail amplifier, the sensed range must be scaled to remain within the input common-mode region, while the monitor output must maintain adequate margin from the supply rails.
Önerilen
Portable Measurement and IoT Interfaces
The LM358N/NOPB is useful in compact measurement and IoT interface modules that require two low-frequency analog channels without an expensive precision amplifier. It can condition two sensor outputs, amplify a bridge signal, or buffer inputs before digitization. Operation from a single supply reduces board complexity, and the 1 MHz bandwidth is normally sufficient for slow sensor dynamics. Battery-powered designs must still examine total supply current, and sensor excitation or input bias requirements must be confirmed against the device's electrical characteristics.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LM358N/NOPB — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LM358AN/NOPB | RC4558N | LM358N | LM358N | LM2904N |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics | onsemi | onsemi |
| Package | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 |
| Number of Amplifiers | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
Ana Farklılayıcılar
- Two general-purpose amplifiers in one 8-pin PDIP (karşılaştırma:LM324KAPWR)
- Direct through-hole package compatibility (karşılaştırma:LM358N from STMicroelectronics)
- Single-supply general-purpose architecture (karşılaştırma:LM2902NSR)
- Lower channel count for focused dual-amplifier designs (karşılaştırma:LM324ANSR)
Tasarım Notları
Keep the supply below the 32 V maximum and place a bypass capacitor close to pin 8 and the ground connection at pin 4. Because the LM358 family is not rail-to-rail, calculate the required signal range against the actual supply voltage rather than assuming the inputs and outputs can reach either rail. Confirm that every operating condition, including supply tolerance, stays within the component limits.
Use the numbered 8-pin PDIP layout for both channels: OUT1, IN1−, IN1+, GND, IN2+, IN2−, OUT2, and V+. Maintain a common ground reference between the two channels and place input-return paths away from output and supply-current paths. A replacement is PCB-safe only when it uses the same PDIP footprint and the same functional pin assignments.
Do not treat the 1 MHz gain-bandwidth figure as permission to use arbitrarily high closed-loop gain with heavy capacitive loading. Check the feedback network, expected load, output-current demand, and output-swing requirements. Also verify input bias current when the source has high impedance, since bias-current error can dominate the signal even when the amplifier's voltage gain is correct.
Keep feedback components close to the relevant input and output pins and route both amplifier channels with short, low-loop-area paths. Grounding and decoupling should be arranged to minimize shared impedance between sensitive input channels and output or supply-return currents. For higher-frequency or precision requirements, evaluate whether the 1 MHz LM358N/NOPB performance is adequate before using more complex compensation or filtering.
Uyumluluk Bilgisi
No specific compliance declaration was identified in the referenced manufacturer or distributor information. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact orderable MPN before environmental qualification.