Ürünler (21.000+)

PIC18F45K80-H/ML - 8-Bit 64MHz MCU, 32KB Flash, ECAN | Microchip
PIC18F45K80-H/ML

PIC18F45K80-H/ML - 8-Bit 64MHz MCU, 32KB Flash, ECAN | Microchip

The Microchip Technology PIC18F45K80-H/ML is a high-temperature-grade 8-bit microcontroller from the PIC18F K80 family, integrating 32 KB of Flash program memory, 3.6 KB of RAM, and 1 KB of EEPROM in a 44-pin VQFN (8x8 mm) exposed-pad package. It runs at up to 64 MHz (16 MIPS) and operates from 1.8 V to 5.5 V, with on-chip ECAN, 12-bit ADC, CTMU touch interface, and nanoWatt XLP ultra-low-power technology. The "-H" suffix denotes the high-temperature variant qualified for extended ambient operation, and the "/ML" suffix specifies the 44-VQFN surface-mount land pattern. An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control tasks such as sensor reading, motor actuation, and protocol bridging. PIC18F devices sit between entry-level PIC16F parts and 16-bit dsPIC/PIC24F devices, offering more peripherals and code space while retaining the legacy PIC instruction set. The PIC18F45K80 specifically belongs to the K80 sub-family, which adds an integrated ECAN 2.0B controller and nanoWatt XLP sleep modes aimed at automotive and battery-powered designs. Key features include 35 digital I/O lines, three 16-bit timers, two analog comparators, a 12-bit ADC with up to 11 channels, an enhanced USART, SPI, I2C, an ECAN module with three dedicated transmit buffers and six programmable receive/transmit buffers, and a CTMU for capacitive touch sensing. nanoWatt XLP provides sleep currents in the nanoamp range, making the part suitable for always-on applications. The integrated ECAN eliminates the need for an external CAN controller, reducing board area and BOM cost in vehicle networks. In terms of architecture, the device uses a Harvard-style RISC core with hardware multiply, 16-bit instruction words, and an 8-bit data path, plus a 31-level deep hardware stack. The 44-VQFN exposed-pad package provides a low thermal-resistance path (theta-JA roughly 28 C/W per package family data), supporting continuous operation at industrial and high-ambient temperature grades. Internal oscillator options and a wide 1.8 V to 5.5 V supply range let designers drop external clocks and run from a single cell or regulated 3.3 V rail. Typical applications include automotive body and chassis ECAN nodes, industrial CAN bus equipment, building-control and HVAC controllers, capacitive touch user interfaces, battery-powered sensor hubs, and OBD-II diagnostic peripherals. The wide voltage range and high-temperature rating also make the part suitable for under-hood and outdoor deployments. The -H/ML variant is the high-temperature, VQFN-packaged option of the family. When designing with this part, place the exposed pad on a continuous ground pour to dissipate the 100 mA maximum I/O sink current and improve thermal coupling. Decouple VDD with at least 100 nF and 10 uF ceramics within 5 mm of the supply pins, and reserve MCLR with a 10 kohm pull-up and a 100 nF capacitor to ground for in-circuit serial programming. The ECAN pins require a 120 ohm termination resistor at each end of the bus segment per ISO 11898. This page synthesizes DigiKey/Mouser distributor pricing, drop-in VQFN-44 alternatives from the same K80 family, comparison data versus PIC18F45K42-I/ML, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC18F45K80-H/PT - 8-bit MCU, 64MHz, 32KB Flash, ECAN, TQFP-44 | Microchip
PIC18F45K80-H/PT

PIC18F45K80-H/PT - 8-bit MCU, 64MHz, 32KB Flash, ECAN, TQFP-44 | Microchip

The Microchip Technology PIC18F45K80-H/PT is a high-temperature, 8-bit PIC microcontroller built on the PIC18F family core, delivering 64 MHz (16 MIPS) performance with 32 KB of Flash program memory in a 44-pin TQFP (10x10 mm) package. It features an integrated ECAN (Enhanced Controller Area Network) module with six programmable receive/transmit buffers, three dedicated transmit buffers, and a charge time measurement unit (CTMU) for capacitive-touch user interfaces. The device operates from 1.8 V to 5.5 V with nanoWatt XLP extreme-low-power modes, making it suitable for energy-conscious applications. A 12-bit ADC with advanced analog interface, multiple timers, enhanced compare/capture/PWM modules, and 35 digital I/O lines round out its peripheral set, while the -H temperature grade marks it for high-temperature environments beyond the standard industrial -40 C to +85 C range. A microcontroller (MCU) is a single-chip computer that integrates a CPU, volatile and non-volatile memory, and configurable peripherals around a shared bus. The PIC18F is an enhanced 8-bit Harvard-architecture MCU family from Microchip with a RISC-style instruction set, hardware multiply, and 16-bit instruction words. Within the broader microcontroller taxonomy, the PIC18F45K80 belongs to the PIC18 K-series, distinguished by the K80 family's combination of ECAN, nanoWatt XLP, and CTMU peripherals tailored for automotive, building, elevator, and capacitive-touch designs. Key features include integrated ECAN with flexible buffer configuration, 32 KB Flash supporting self-programmability via runtime write capability, 3.6 KB RAM, 1 KB EEPROM, an internal oscillator selectable up to 64 MHz, and a 12-bit ADC supporting touch sensing via the CTMU. Three dedicated ECAN transmit buffers, FIFO or standard buffer modes, and programmable filtering add robustness to CAN bus workloads. The combination of ECAN and nanoWatt XLP enables sensor and actuator nodes that wake from CAN traffic, prolonging battery life in remote field installations. Architecturally, the PIC18F45K80 uses a modified Harvard memory layout with separate program and data buses, a 32-level hardware stack, and a 16-bit instruction path that delivers predictable interrupt latency. The ECAN module implements CAN 2.0B with 29-bit identifiers and is ISO 16845 certified for conformance at the protocol layer, while the nanoWatt XLP technology reduces sleep current to nanoampere levels and supports multiple wake sources including INT, RTCC, and watchdog. Typical applications include building automation (HVAC, lighting, occupancy), elevator controllers, automotive CAN nodes, capacitive-touch user interfaces, and industrial sensors that must operate from battery power. The wide 1.8 V to 5.5 V supply range allows direct connection to 3.3 V sensors or 5 V actuator drivers without level shifters, simplifying analog front-end design. When designing with this MCU, budget carefully for the 44-pin TQFP package's fine 0.8 mm pitch, which requires careful PCB layout, and verify that the VDD rise-time specification (tVDDR) is met to ensure proper POR behavior. Choosing the -H grade part (vs -I or -E variants) gives extended high-temperature operation beyond +85 C and is the key consideration for this part number. This page synthesizes distributor pricing, drop-in alternatives, and PCB design notes not found in the manufacturer datasheet.

RFQ İletişim
PIC18F45K80-I/P - 8-bit MCU, 32KB Flash, ECAN, XLP | Microchip
PIC18F45K80-I/P

PIC18F45K80-I/P - 8-bit MCU, 32KB Flash, ECAN, XLP | Microchip

The Microchip Technology PIC18F45K80-I/P is a high-performance 8-bit PIC18 microcontroller with integrated ECAN, 32KB of Flash program memory, and 4KB of RAM, housed in a 40-pin PDIP (DIP-40) through-hole package. It executes instructions at up to 16 MIPS from a 64 MHz internal oscillator, and operates from 1.8 V to 5.5 V across the industrial -40 C to +85 C temperature range. The -I/P suffix denotes the industrial temperature grade and PDIP package. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, working RAM, and programmable peripherals. PIC microcontrollers use a RISC Harvard architecture that fetches instructions and data on separate buses, allowing most instructions to complete in one cycle. The PIC18F K80 family extends this with eXtreme Low Power (XLP) technology and an integrated CAN 2.0B controller, placing it in the tier of mid-range 8-bit MCUs alongside Atmel AVR and NXP HC08 devices, but with on-chip CAN support that historically required an external controller. Key features include 12-bit A/D conversion across 11 channels, 5 PWM outputs, 9 enhanced Capture/Compare/PWM modules, 2 analog comparators, an integrated Charge Time Measurement Unit (CTMU) for capacitive touch, and nanoWatt XLP sleep modes that drop supply current into the nanoamp range. ECAN hardware accelerates CAN 2.0A/B frame handling, freeing the CPU from bit-banging. The device uses a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, plus an 8x8 hardware multiplier and 16x16 accumulator that accelerates DSP-style math without a separate DSP engine. EEPROM emulation is supported via Flash self-write, and the ICSP interface allows in-circuit programming and debugging. Typical applications include CAN-based automotive body controllers, building automation gateways, elevator control panels, industrial sensor nodes, capacitive touch user interfaces, and low-power remote sensor stations. The combination of ECAN, XLP sleep, and 12-bit ADC makes the PIC18F45K80 particularly attractive for distributed nodes that sleep most of the time and wake briefly to transmit. When designing with this part, place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair, and follow Microchip AN1229 (Low-Power Design Guide) for sleep current budgeting. Note that the -I/P industrial variant is pin-compatible with the -E/P extended temperature grade but specified only to +85 C, not +125 C. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes that go beyond what is in the bare Microchip datasheet, including same-package variants and the closest cross-brand 8-bit MCUs that fit the same 40-pin PDIP footprint.

RFQ İletişim
PIC18F45K80-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP | Microchip
PIC18F45K80-I/PT

PIC18F45K80-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP | Microchip

The Microchip Technology PIC18F45K80-I/PT is an 8-bit PIC microcontroller in the PIC18F K80 family featuring integrated ECAN, nanoWatt XLP extreme low-power technology, 32 KB of Flash program memory, 3.6 KB of RAM, and a 12-bit ADC with CTMU, housed in a 44-pin TQFP package. It runs at up to 64 MHz (16 MIPS) over a 1.8 V to 5.5 V supply range, targeting automotive, building-control, and elevator-control applications where low sleep current and CAN connectivity are required. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, a Flash program store, on-chip RAM, peripherals (timers, ADC, communication controllers), and a CPU that executes one instruction per cycle. PIC18F devices extend the baseline PIC16 architecture with a 16-bit instruction word, hardware multiply, linear code space, and C-friendly peripheral sets, making them a frequent choice for cost-sensitive embedded control in the PIC microcontroller family -> 8-bit MCU -> microcontroller -> embedded IC hierarchy. Key features include 32 KB Flash (16K x 16), 4 KB RAM, 1 KB EEPROM, 10-bit ADC plus dedicated 12-bit ADC channels, three ECAN modules with DMA, seven CCP/ECCP modules, four 8/16-bit timers, two MSSP (I2C/SPI) ports, two USART modules, and nanoWatt XLP sleep currents below 100 nA in selected modes. The 44-pin TQFP (10x10 mm) provides up to 35 digital I/O pins plus 12 analog-capable pins. The K80 architecture pairs a RISC-style PIC18 core with Microchip's eXtreme Low-Power techniques (deep sleep, low-power Timer1, internal 16 MHz HFINTOSC) and an on-chip Charge Time Measurement Unit (CTMU) used for capacitive touch, temperature scanning, and time-of-flight-style measurements. Hardware ECAN 2.0B with DMA offloads message filtering from the core, freeing CPU bandwidth for application logic. Typical applications include automotive body and chassis ECAN nodes, building automation and elevator controllers, industrial CAN nodes, capacitive-touch human interfaces using CTMU, and low-power battery-backed sensor hubs. The wide 1.8 V to 5.5 V range also supports USB-less 5 V designs and single-cell Li-ion (3.7 V nominal) platforms without level shifters. When designing with this part, allocate one ECAN module to the bus, reserve the CTMU for touch or analog scanning, and budget Flash for bootloader plus application. For automotive deployments, choose the -I/PT industrial grade or upgrade to the AEC-Q100-qualified PIC18F46K80 family variant when required. This page consolidates distributor pricing, drop-in replacement guidance, and design notes that are not collated in the manufacturer datasheet, accelerating sourcing and board bring-up.

RFQ İletişim
PIC18F45K80T-I/ML - 8-Bit 64MHz MCU w/ ECAN & 32KB Flash | Microchip
PIC18F45K80T-I/ML

PIC18F45K80T-I/ML - 8-Bit 64MHz MCU w/ ECAN & 32KB Flash | Microchip

The Microchip Technology PIC18F45K80T-I/ML is a high-performance 8-bit RISC microcontroller from the PIC18F K80 family with integrated ECAN, 32 KB (16K x 16) of Flash program memory, 3.6 KB of data RAM, and 1 KB of EEPROM, packaged in a 44-pin VQFN (8 mm x 8 mm) with an exposed thermal pad. It executes instructions at 64 MHz (16 MIPS) across a 1.8 V to 5.5 V operating range and integrates nanoWatt XLP extreme low-power technology for sleep currents suitable for battery-backed and energy-harvesting designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals in one IC. The PIC18F family uses an enhanced Harvard RISC architecture with separate program and data buses, allowing instruction fetch and operand read in the same cycle. Within the broader taxonomy, the PIC18F45K80 sits under 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. ECAN is Microchip's enhanced implementation of the Controller Area Network (CAN) bus protocol originally specified by Bosch ISO 11898, widely used in automotive and industrial networks. Key features include an integrated 12-bit ADC with up to 11 channels, a CTMU (Charge Time Measurement Unit) for capacitive touch and time-of-flight measurements, three 16-bit timers, two MSSP (SPI/I2C) ports, two Enhanced USART modules (one with ECAN), and a 16-bit Enhanced PWM with up to 4 channels. The device supports 35 digital I/O lines and operates from -40 C to +85 C (industrial grade). The PIC18F45K80T-I/ML is used in automotive body and comfort modules, building control (HVAC, lighting, elevators), industrial automation nodes, and CAN-bus sensor interfaces where ECAN peripheral, 12-bit ADC accuracy, and XLP sleep current below 100 nA together reduce BOM cost. Compared with discrete microcontroller + external CAN controller designs, integrating ECAN saves PCB area, lowers BOM cost, and simplifies firmware drivers through Microchip's free MPLAB X IDE and XC8 toolchain. When designing with this part, place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair, tie the exposed thermal pad to a clean ground plane for thermal and electrical performance, and use the internal LDO or external regulator carefully because the wide 1.8 V to 5.5 V range allows direct Li-ion or 3.3 V system supply.

RFQ İletişim
PIC18F45K80T-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP
PIC18F45K80T-I/PT

PIC18F45K80T-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP

The Microchip Technology PIC18F45K80T-I/PT is a high-performance 8-bit PIC18 microcontroller featuring an integrated ECAN (Enhanced Controller Area Network) module, nanoWatt XLP (eXtreme Low Power) technology, and 32KB (16K x 16) of Flash program memory in a 44-pin TQFP (10x10 mm) package. Key features include a 64MHz internal oscillator, 35 digital I/O pins, 3.6KB of SRAM data memory, 1KB of EEPROM, a 12-bit ADC with Charge Time Measurement Unit (CTMU), and an operating voltage range of 1.8V to 5.5V. The device executes instructions at 16 MIPS (Million Instructions Per Second) under typical conditions. The PIC18F45K80 belongs to Microchip's PIC18 XLP 18K family, which is a subfamily of 8-bit microcontrollers within the broader PIC microcontroller taxonomy (PIC microcontroller -> MCU -> microprocessor -> semiconductor). The XLP designation indicates nanoWatt technology with sleep currents measured in nanoamps, making this family well-suited to battery-powered and energy-harvesting designs. The integrated ECAN module supports CAN 2.0B with six programmable receive/transmit buffers and three dedicated transmit buffers, eliminating the need for an external CAN controller in automotive and industrial networked applications. Typical applications include automotive body and chassis ECAN nodes, building climate and elevator controllers, industrial sensor nodes, and battery-powered remote monitoring with CAN connectivity. The 1.8V minimum supply voltage allows operation directly from a single lithium cell across most of its discharge curve, while 5.5V tolerance supports industrial 5V rails. Designers should note that the PIC18F45K80T-I/PT is the tape-and-reel (T) and industrial temperature (-I/-40C to +85C) variant. Pin-compatible family members with different flash densities, temperature grades, and packaging options are available for cost optimization. The microcontroller requires MPLAB X IDE and a compatible programmer such as PICkit or ICD for firmware development.

RFQ İletişim
PIC18F45Q10-E/P - 8-Bit 64MHz 32KB FLASH 40-PDIP MCU | Microchip
PIC18F45Q10-E/P

PIC18F45Q10-E/P - 8-Bit 64MHz 32KB FLASH 40-PDIP MCU | Microchip

The Microchip Technology PIC18F45Q10-E/P is an 8-bit PIC microcontroller in the PIC18F2x/4x/5xQ10 family, integrating 32KB of FLASH program memory, 64MHz maximum CPU clock, and 5V operation in a 40-pin PDIP through-hole package. The Q10 family targets robust, real-time control and sensor-node applications, providing 5V-tolerant I/O for higher noise immunity compared to typical 3.3V MCUs. Background: A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (FLASH/ROM), volatile data memory (RAM), and a rich set of peripheral blocks (timers, ADC, communication interfaces) on a single silicon die. Within the MCU taxonomy, the PIC18F45Q10 belongs to the 8-bit family (PIC18 core) > enhanced mid-range with nanoWatt XLP power management > PIC18-Q10 sub-family > 40-pin variants. The Functional Safety (FuSa) family designation signals that the device includes diagnostics and documentation suitable for IEC 60730 class B safety functions in household appliances. Key features of the PIC18F45Q10 include a 10-bit ADC with Computation (ADC2) supporting averaging, filtering, and Capacitive Voltage Divider (CVD) for touch sensing, Configurable Logic Cells (CLCs) for hardware-level glue logic, Complementary Waveform Generator (CWG) with auto-shutdown, and multiple Core-Independent Peripherals (CIPs) such as EUSART, MSSP (I2C/SPI), and 16-bit PWM with multiple capture/compare channels. The device operates from 1.8V to 5.5V (F-version, extended) and is offered in the -40C to +125C extended industrial temperature range, denoted by the -E suffix. The PIC18F45Q10 uses an enhanced Harvard architecture with a 16-bit instruction word and an 8-bit data path, executing most instructions in one instruction cycle (4 clock periods). Internal oscillator flexibility (32kHz-64MHz HFINTOSC), programmable PLL, and nanoWatt XLP sleep modes (< 100 nA typical) make the part attractive for battery- or energy-harvesting sensor nodes where quiescent draw dominates the energy budget. Typical applications include industrial control sensor nodes, consumer appliances requiring IEC 60730 class B functional safety (white goods, washing machines, dishwashers), touch-sensing human-machine interfaces using the CVD peripheral, low-power IoT end-nodes with sleep duty cycling, and small motor-driver companions with the CWG and PWM peripherals. The 5V I/O is also valued for retrofitting legacy 5V systems. When designing with this device, allocate decoupling capacitors (100 nF per VDD pin, plus a bulk 10 uF) close to the IC, route MCLR with proper pull-up, and reserve an ICSP header on the PCB for in-circuit programming and debugging. The Q10 family's CIPs can offload tasks traditionally handled in firmware, reducing CPU wake-up frequency. This page synthesizes distributor pricing, drop-in alternatives, design notes, and AEO-optimized FAQ not found in the manufacturer datasheet alone, providing engineers and procurement teams a single reference for part selection.

RFQ İletişim
PIC18F45Q10-E/PT - 32KB Flash 8-bit MCU w/ DAC, 44-TQFP | Microchip
PIC18F45Q10-E/PT

PIC18F45Q10-E/PT - 32KB Flash 8-bit MCU w/ DAC, 44-TQFP | Microchip

The Microchip Technology PIC18F45Q10-E/PT is an 8-bit high-performance PIC microcontroller built on the enhanced PIC18 RISC core, delivering 32 KB of Flash program memory, 2 KB of SRAM and 256 bytes of EEPROM in a 44-pin TQFP package. The device integrates a 10-bit ADC with up to 35 analog channels, a 5-bit DAC, configurable logic cells (CLCs), complementary waveform generator (CWG), and peripherals such as PWM, HLVD, WWDT, SCAN and CRC for embedded safety. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory and peripheral interfaces on one die. The PIC18 family belongs to the 8-bit MCU category, which sits under the broader taxonomy of microcontrollers -> embedded processors -> semiconductors. PIC18 devices use a RISC-style modified Harvard architecture and Microchip's eXtreme Low Power (XLP) technology, giving the PIC18F45Q10 class-leading active and sleep current consumption for battery-powered sensor nodes. Key features include 64 MHz operation (16 MIPS), 5V operation for increased noise immunity in industrial environments, peripheral pin select (PPS) for flexible I/O mapping, and Core Independent Peripherals (CIPs) that offload tasks from the CPU. The integrated CLCs let designers implement custom combinational/sequential logic in hardware without external gates, while the CWG simplifies dead-band control for half-bridge and full-bridge power switching. Typical applications include industrial sensor nodes, home appliances, IoT edge devices, motor control interfaces, touch-sensing front panels and automotive body modules. The 5V-tolerant I/O and wide operating temperature range (-40C to +125C) make it equally at home in noisy factory floors and consumer products. When designing with the PIC18F45Q10-E/PT, ensure that the ICSP programming header is accessible on the PCB, route the VCAP pin with a low-ESR 1uF-10uF capacitor, and leverage the PPS feature to remap peripherals only when required to avoid silicon errata conflicts.

RFQ İletişim
PIC18F45Q10-I/MP - 64MHz 8-bit MCU, 32KB Flash, 40-QFN | Microchip
PIC18F45Q10-I/MP

PIC18F45Q10-I/MP - 64MHz 8-bit MCU, 32KB Flash, 40-QFN | Microchip

The Microchip Technology PIC18F45Q10-I/MP is an 8-bit PIC XLP microcontroller with 32KB Flash, 2KB RAM, and 256B EEPROM, operating at up to 64MHz in a 40-pin QFN (5x5) package with exposed pad. It integrates intelligent analog peripherals including a 10-bit ADC with Computation (ADCC), a 5-bit DAC, and configurable logic cells (CLC), all designed for robust real-time control and sensor node applications. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, non-volatile program memory, working RAM, and a set of on-chip peripherals around a compact instruction set. 8-bit MCUs sit at the bottom of the microcontroller hierarchy (4-bit -> 8-bit -> 16-bit -> 32-bit) and are valued for deterministic behavior, low power draw, and ease of use in cost-sensitive embedded designs. The PIC18F45Q10 family belongs to the broader power management / MCU hierarchy: microcontroller -> embedded controller -> semiconductor IC, and is specifically targeted at industrial, consumer, automotive, touch sensing and IoT endpoints. Key features include 64MHz CPU speed, 32KB self-programmable Flash, 1.2KB data EEPROM emulation via Flash, hardware 10-bit PWM, Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), and a Cyclic Redundancy Check (CRC/SCAN) module with memory self-scan. The part supports 5V operation for increased noise immunity in harsh environments. Core-independent peripherals such as CLC let engineers implement custom hardware glue logic without burdening the CPU. Typical applications include industrial control loops, low-power IoT sensor nodes, capacitive touch sensing front-ends, automotive body and lighting modules, and consumer appliances. The wide 2.3V to 5.5V VDD range allows direct interfacing to 5V analog signals and 3.3V digital rails from a single supply. When designing with this device, allocate the QFN exposed pad to a continuous ground pour to meet thermal resistance and signal-integrity targets. The PIC18F45Q10 supports MPLAB X IDE with the free XC8 compiler, and the PICkit or Snap programmer can be used for in-circuit debug. This page synthesizes distributor pricing, drop-in PIC18 Q10 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC18F45Q10-I/P - 32KB Flash 8-bit MCU 64MHz 40-PDIP | Microchip
PIC18F45Q10-I/P

PIC18F45Q10-I/P - 32KB Flash 8-bit MCU 64MHz 40-PDIP | Microchip

The Microchip Technology PIC18F45Q10-I/P is a 32KB Flash, 8-bit PIC18 XLP microcontroller running up to 64 MHz in a 40-pin PDIP through-hole package. It integrates 2KB SRAM, 1KB EEPROM, 5V operation for noise immunity, intelligent analog peripherals, and Functional Safety (FuSa) capability for safety-critical systems. The PIC18F45Q10 belongs to the PIC18 family of 8-bit microcontrollers (MCUs) within Microchip's broader PIC® architecture hierarchy. An 8-bit MCU executes instructions on 8-bit data paths and is the workhorse of embedded control for cost-sensitive, deterministic real-time applications. PIC18 devices extend the baseline and mid-range PIC cores with 16-bit instructions, hardware multiplier, and C-optimized architecture, enabling efficient high-level language development while retaining deterministic interrupt response. Key features of this part include a 64 MHz internal oscillator, up to 64 MHz CPU clock with 4x PLL option, 35 instruction set, 10-bit ADC with Computation (ADCC) automating averaging and threshold comparison, 5-bit DAC, 2 analog comparators with selectable hysteresis, Configurable Logic Cells (CLC) for hardware state-machine peripherals, Complementary Waveform Generator (CWG), and Peripheral Pin Select (PPS) for flexible signal routing. Functional Safety (FuSa) diagnostics make it suitable for IEC 61508 SIL-2 capable designs when used with the supporting FMEDA and diagnostic libraries. Typical applications include industrial sensor nodes, household appliances, motor control, lighting ballasts, IoT edge nodes, automotive body and chassis subsystems, HVAC controllers, and any real-time control loop where deterministic behavior, low power, and 5V noise immunity are required. The 32KB Flash supports moderate firmware footprints typical of connected sensor firmware with protocol stacks. When designing with this device, allocate sufficient decoupling (100 nF + 1 µF near each supply pin), use the ICSP™ header for in-circuit programming, and follow Microchip AN1255 for Class B / IEC 60730 safety diagnostics on white goods. The wide 2.3V-5.5V VDD range supports both 3.3V and 5V systems, but power-on reset thresholds differ at each range.

RFQ İletişim
PIC18F45Q10-I/PT - 32KB Flash 8-bit MCU, 64MHz, 44-TQFP
PIC18F45Q10-I/PT

PIC18F45Q10-I/PT - 32KB Flash 8-bit MCU, 64MHz, 44-TQFP

The Microchip Technology PIC18F45Q10-I/PT is an 8-bit PIC18 XLP® microcontroller delivering 64 MHz CPU performance from 32 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a 44-pin TQFP (10x10 mm) package. The part belongs to the PIC18-Q10 Functional Safety (FuSa) family, which combines eXtreme Low Power (XLP) operation with 5 V tolerance for increased noise immunity in industrial and automotive sensor-node applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. Within the broader taxonomy, the PIC18F45Q10 sits in the 8-bit microcontroller category, which itself belongs to the embedded microcontroller / system-on-chip / semiconductor device hierarchy. The 8-bit PIC architecture offers deterministic instruction execution, single-cycle hardware multiply, and a C-optimized instruction set, which simplifies real-time control firmware while keeping BOM cost low. Key features of the PIC18F45Q10 include integrated intelligent analog with a 10-bit ADC (up to 35 channels), a 5-bit/10-bit DAC, configurable logic cells (CLCs), complementary waveform generators (CWG), high-resolution PWM with fine-edge placement, hardware limit timer (HLT), windowed watchdog timer (WWDT), and a CRC/SCAN module for functional safety diagnostics. Operating voltage spans 2.3 V to 5.5 V with 5 V tolerant digital I/O, supporting noisy industrial 24 V / 5 V regulated rails and direct interface to 5 V sensors. The device architecture uses a Harvard RISC core with separate program and data buses, hardware multiplier, and 31-level priority interrupt controller. The combination of CIPs (Core Independent Peripherals) and CLCs allows event-driven logic without CPU intervention, enabling predictable real-time response with reduced firmware complexity. Typical applications include industrial sensor interfaces, brushless DC fan or pump controllers, automotive body and sensor nodes, touch-sensing user interfaces, IoT edge nodes, and consumer appliances. The PIC18F45Q10 is also a strong fit where functional safety (IEC 60730 class B) is required in home appliances and white goods. When designing with this device, place a 100 nF decoupling capacitor close to each VDD/VSS pair and use the internal voltage regulator with a bulk capacitor on VDD/VBAT to meet inrush requirements. For low-noise analog, group ADC-capable pins on a quiet ground plane and avoid routing switching signals underneath. XLP sleep currents below 50 nA (typical) enable battery-backed sensor nodes that wake on interrupt. This page synthesizes distributor pricing, drop-in 44-TQFP alternatives, and practical design notes not found in the manufacturer datasheet. For drop-in substitution in the same 44-TQFP footprint, see the alternatives section.

RFQ İletişim
PIC18F45Q10T-I/MP - 32KB Flash 8-bit MCU, 64MHz, 40-QFN | Microchip
PIC18F45Q10T-I/MP

PIC18F45Q10T-I/MP - 32KB Flash 8-bit MCU, 64MHz, 40-QFN | Microchip

The Microchip Technology PIC18F45Q10T-I/MP is an 8-bit PIC18 XLP eXtreme Low-Power microcontroller with 32KB Flash, 2KB RAM, and 256B EEPROM, running at up to 64MHz in a 40-pin QFN (5x5 mm) package with exposed pad. It integrates 10-bit ADC2, 5-bit/8-bit DAC, PWM, CWG, HLT, WWDT, and SCAN/CRC peripherals and is qualified for Functional Safety (FuSa) applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as ADC, timers, and communication controllers. Within the broader semiconductor hierarchy, an MCU sits between microprocessors (MPUs, which require external memory) and application-specific integrated circuits (ASICs); the 8-bit PIC18 family specifically targets deterministic, real-time control with low power consumption and rich on-chip analog. Key differentiating features include 5V operation for increased noise immunity in industrial environments, the eXtreme Low-Power (XLP) architecture with sleep currents in the nanoamp range, Core Independent Peripherals (CIPs) such as CLC, CWG, and Numerically Controlled Oscillator (NCO), and Functional Safety documentation support for IEC 61508 SIL-3 / IEC 60730 Class B designs. The device supports 1.8V-5.5V operation (with 5V tolerant digital pins) and integrates 36 I/O lines. Architecturally, the PIC18F45Q10 uses a Harvard RISC core with single-cycle execution at 64MHz (16 MIPS), hardware Multiply and Divide, and a 16-level hardware stack. The integrated intelligent analog block includes ADC2 with computation, dual comparators, a Fixed Voltage Reference (FVR), and zero-cross detection, reducing external component count and BOM cost. Typical applications include industrial sensor nodes, low-power IoT end nodes, home appliances (white goods), automotive body and interior modules, motor control (BLDC, stepper, fan), and Functional Safety household appliances. The wide 1.8V-5.5V range and 5V tolerance make it well suited for 3.3V and 5V mixed systems. When designing with this device, ensure the exposed pad (EP) on the 40-QFN package is soldered to a sufficient ground copper pour for thermal dissipation (theta-JA around 28 C/W). For Functional Safety designs, use the supplied FMEDA, safety manual, and diagnostic libraries from Microchip to accelerate IEC 61508 / IEC 60730 certification. This page synthesizes distributor pricing, drop-in alternatives from the PIC18-Q10 family, and practical design notes for 8-bit real-time control not found in the manufacturer datasheet alone.

RFQ İletişim
PIC18F45Q10T-I/PT - 8-bit 64MHz MCU, 32KB Flash, 44-TQFP | Microchip
PIC18F45Q10T-I/PT

PIC18F45Q10T-I/PT - 8-bit 64MHz MCU, 32KB Flash, 44-TQFP | Microchip

The Microchip PIC18F45Q10T-I/PT is an 8-bit PIC18 RISC microcontroller operating up to 64 MHz with 32 KB of Flash program memory, 2 KB of RAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It integrates intelligent analog peripherals, configurable logic, and functional-safety features, making it a low-power, high-performance member of the PIC18 Q10 family. The device is supplied on tape and reel (T/R) for high-volume SMT assembly. An 8-bit microcontroller (MCU) is a compact programmable processor that integrates a CPU, memory, and peripherals on a single silicon die. MCUs sit within the broader taxonomy: microcontroller -> embedded processor -> semiconductor IC. The PIC18F45Q10 belongs to Microchip's enhanced 8-bit PIC18 family, which uses a RISC Harvard architecture with separate program and data buses, achieving single-cycle instruction execution at up to 64 MHz. Key features of this device include 36 digital I/O pins, a 10-bit ADC with up to 35 analog inputs, a 5-/10-bit DAC, multiple PWM modules, a Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), Hardware Limit Timer (HLT), Windowed Watchdog Timer (WWDT), and Cyclic Redundancy Check with memory scan (SCAN/CRC) for functional safety. The 1.8 V to 5.5 V operating range supports battery-powered and 5 V industrial designs, while XLP (eXtreme Low Power) technology delivers sub-uA sleep currents for IoT endpoints. The architecture uses an 8-bit data path with a 16-bit instruction word, a 31-level hardware stack, and interrupt-driven I/O. Integrated peripherals are routed through Microchip's Peripheral Pin Select (PPS) system, allowing flexible reassignment of digital functions to physical pins without rewiring the PCB. The integrated Core Independent Peripherals (CIPs) - CLC, CWG, HLT, NCO, and PWM - offload timing-critical tasks from the CPU, enabling deterministic real-time control in sensor-node and motor-control applications. Typical applications include industrial sensor nodes, real-time closed-loop control, BLDC and stepper motor drivers, IoT edge devices, low-power battery monitoring, automotive body and lighting modules, and functional-safety subsystems. The wide 1.8 V to 5.5 V supply range is especially valuable in 5 V noisy industrial environments where higher-voltage rails improve noise immunity. Designers should budget PCB area for the 44-pin TQFP (10x10 mm) footprint and confirm peripheral pin mapping using MPLAB X IDE with MCC. For functional-safety designs, the on-die CRC/Scan feature simplifies IEC 61508 SIL 2 compliance for industrial sensors. This page combines distributor pricing, drop-in alternatives, and practical design guidance not found in the manufacturer datasheet - optimized to give engineers an at-a-glance procurement and replacement decision.

RFQ İletişim
PIC18F45Q43-E/P - 64MHz 8-Bit MCU, 32KB Flash, 40-PDIP | Microchip
PIC18F45Q43-E/P

PIC18F45Q43-E/P - 64MHz 8-Bit MCU, 32KB Flash, 40-PDIP | Microchip

The Microchip Technology PIC18F45Q43-E/P is a high-performance 8-bit PIC microcontroller from the PIC18-Q43 family, featuring a 64 MHz CPU and 32 KB of on-chip Flash program memory in a 40-pin PDIP through-hole package. According to the Microchip PIC18F25/45/55Q43 datasheet, the part integrates 2 KB of SRAM, a 12-bit ADC with Computation (ADCC) supporting capacitive voltage divider (CVD) touch sensing, six DMA controllers, configurable logic cells (CLCs), three 16-bit dual PWMs providing six PWM outputs, five UARTs, and vectored interrupt hardware. The wide operating voltage range of 1.8 V to 5.5 V combined with XLP (eXtreme Low Power) technology enables battery-friendly applications. An 8-bit PIC microcontroller is a Harvard-architecture RISC device that executes most instructions in a single cycle, optimized for deterministic real-time control and low-power embedded designs. Within the broader taxonomy, the PIC18F45Q43 sits at the intersection of: PIC18 family -> PIC MCU -> 8-bit microcontroller -> microcontroller unit (MCU) -> embedded processing IC. The PIC18-Q43 sub-family specifically targets modern real-time control by combining legacy PIC18 simplicity with Core Independent Peripherals (CIPs) that offload hardware tasks from the CPU. Key differentiating features of the PIC18F45Q43-E/P include the 12-bit ADCC with hardware averaging/filtering/threshold comparison, six independent DMA channels that move data without CPU intervention, and CLCs that let designers build custom logic gates and state machines in silicon. The vectored interrupt controller provides fixed interrupt latency of three instruction cycles, critical for deterministic motor control and power-conversion firmware. XLP technology provides deep-sleep currents down to the nanoampere range with retention RAM, extending battery life in always-on IoT nodes. Typical applications include industrial sensor signal conditioning, BLDC/PMSM motor control (where the 6 PWM outputs drive a 3-phase inverter), capacitive touch HMI panels, multi-protocol wired sensor hubs, and automotive body modules using the -E (extended) -40 °C to +125 °C temperature grade. The 36 I/O pins and rich peripheral mix let a single chip replace an MCU plus several external logic ICs. When designing with this part, note that programming/debug requires a dedicated ICSP interface (PGECx/PGEDx); the 40-pin PDIP variant is ideal for through-hole prototypes and is the package of choice when hand-soldering or breadboarding is required.

RFQ İletişim
PIC18F45Q43-I/MP - 8-bit 64MHz 32KB Flash XLP MCU | Microchip
PIC18F45Q43-I/MP

PIC18F45Q43-I/MP - 8-bit 64MHz 32KB Flash XLP MCU | Microchip

The Microchip Technology PIC18F45Q43-I/MP is an 8-bit PIC18 XLP microcontroller running up to 64MHz with 32KB Flash, 2KB SRAM and 1KB EEPROM, supplied from 1.8V to 5.5V. It is housed in a 40-pin QFN package (MP, 5x5 mm) with an exposed thermal pad, integrating Core Independent Peripherals (CIPs) such as a 12-bit ADC with Computation (ADCC), an 8-bit DAC, three 16-bit PWMs with dual outputs, six-channel DMA, ZCD, CWG, HLT, WWDT, and SCAN/CRC for hardware-driven real-time control. An 8-bit microcontroller is a CPU that processes data 8 bits per cycle and is widely used in real-time embedded applications where deterministic latency, low power, and rich on-chip peripherals matter more than raw compute throughput. Within the broader taxonomy, PIC microcontrollers occupy the 8-bit MCU segment, and the PIC18F family represents Microchip's enhanced mid-range core featuring a hardware multiplier, C-compiler-friendly architecture, and linear memory addressing. The Q43 sub-family is positioned for analog-rich, hardware-customizable designs and supersedes earlier Q10/K42 generation devices. Key features include a 12-bit ADCC supporting Capacitive Voltage Divider (CVD) for touch sensing, configurable logic cells (CLC) for custom digital glue logic, three independent 16-bit PWMs each offering dual outputs on the same time base, and XLP (eXtreme Low Power) technology delivering sub-microamp sleep currents. The device also integrates an 8-bit DAC, multiple UART/SPI/I2C instances, a 32KB self-programmable Flash and a unique Peripheral Pin Select (PPS) routing matrix for flexible signal mapping. Architecturally, the PIC18F45Q43 uses a modified Harvard bus with a 16-bit instruction word and 8-bit data path, achieving approximately 16 MIPS at 64MHz. The CIP block approach lets analog, timing, and communication tasks run in hardware without CPU intervention, offloading the core in real-time control loops and reducing firmware complexity. Typical applications include capacitive touch user interfaces, BLDC and DC motor/fan control, LED lighting drivers, IoT sensor nodes, and industrial control subsystems. The wide operating voltage and rich peripheral set make it well suited for 24V industrial bus systems running from simple linear regulators. When designing with this MCU, always configure PPS before enabling peripherals, keep traces short for the high-speed 16-bit PWM outputs, and stitch adequate ground copper under the QFN thermal pad. Industrial designs must observe the -40C to +85C industrial temperature grade. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement - not duplicate - the manufacturer datasheet, helping engineers select and qualify the PIC18F45Q43-I/MP for production.

RFQ İletişim
PIC18F45Q43-I/P - 8-Bit 64MHz 32KB Flash MCU 40-PDIP | Microchip
PIC18F45Q43-I/P

PIC18F45Q43-I/P - 8-Bit 64MHz 32KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC18F45Q43-I/P is an 8-bit PIC microcontroller from the PIC18-Q43 family running at 64 MHz, equipped with 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of EEPROM in a 40-pin PDIP through-hole package. It integrates six Direct Memory Access (DMA) controllers, three 16-bit dual PWMs (six PWM outputs), a 12-bit Analog-to-Digital Converter with Computation (ADCC) supporting Capacitive Voltage Divider (CVD), a 5-bit DAC, comparators, and Configurable Logic Cells (CLCs), delivering sophisticated hardware customization with minimal CPU load. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory (Flash), peripherals, and I/O on one die, optimized for embedded control applications where deterministic behavior, low cost, and low power matter more than raw throughput. The PIC18F belongs to Microchip's PIC18 advanced 8-bit architecture family, which targets real-time control and connectivity in a wide range of consumer, industrial, and automotive subsystems. Within that hierarchy, the PIC18-Q43 sub-family (PIC18 → PIC18F → PIC18F-Q43 → PIC18F45Q43) is positioned for advanced hardware-customization designs that need DMA, CLCs, and high-resolution PWM without resorting to a 16-bit or 32-bit MCU. Key features include 64 MHz operation from up to 64 MHz internal oscillator, six DMA channels, three 16-bit PWMs, five UART modules (one supporting LIN/DMX/DALI), two SPI/I2C peripherals, the ADCC with hardware averaging/oversampling, zero-cross detect (ZCD), a fixed voltage reference (1.024/2.048/4.096 V), Windowed Watchdog Timer (WWDT), Cyclic Redundancy Check (CRC/SCAN) module, and 36-level interrupt vectoring for low-latency response. Typical applications include capacitive touch user interfaces, lighting controls, motor control (BLDC/PMSM via FOC), USB-to-UART bridges, industrial sensor hubs, and low-power battery-powered IoT endpoints where XLP (eXtreme Low Power) sleep current extends battery life. Design trade-off: choose the 40-PDIP (PIC18F45Q43-I/P) for through-hole prototyping, educational breadboarding, and socketed designs; choose the 44-TQFP (PIC18F45Q43-I/PT) when moving to surface-mount production with the same die. This page synthesizes distributor pricing, drop-in alternatives selected from Microchip's same-family portfolio and cross-brand sources, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC18F45Q43-I/PT - 8-Bit 64MHz 32KB Flash MCU | Microchip
PIC18F45Q43-I/PT

PIC18F45Q43-I/PT - 8-Bit 64MHz 32KB Flash MCU | Microchip

The Microchip PIC18F45Q43-I/PT is an 8-bit PIC18-Q43 family microcontroller. XLP. Functional Safety (FuSa) device operating at 64 MHz with 32 KB Flash and 2 KB SRAM, housed in a 44-pin TQFP (10x10 mm) package. The part integrates advanced Core Independent Peripherals (CIPs) including DMA, Configurable Logic Cells (CLCs), 16-bit PWMs, a 12-bit ADCC with computation, and a hardware 8-bit DAC for real-time control applications. An 8-bit microcontroller (MCU) is a programmable processor that fetches and executes instructions one byte at a time from internal Flash memory. The PIC18 architecture falls within the broader hierarchy of microcontroller -> embedded processor -> semiconductor IC, where the XLP (eXtreme Low Power) platform sits at the low-power end of Microchip's 8-bit MCU lineup. Unlike 32-bit Cortex-M parts, an 8-bit PIC excels at deterministic bit-manipulation, low-cost BOM integration, and rapid interrupt response with a simplified instruction set. Key features include 32 KB self-programmable Flash, 2 KB SRAM, 256 bytes EEPROM, 3x 16-bit PWM outputs, 6-channel DMA, multiple CLCs, a 12-bit ADC with Computation (ADCC), 8-bit DAC, and Functional Safety (FuSa) diagnostics. The 64 MHz internal oscillator drives 16 MIPS throughput, while the XLP technology enables sleep currents in the nanoamp range for battery-powered systems. Architecturally, the device leverages a Harvard-style RISC core with hardware multipliers and a 31-level hardware stack, providing deterministic timing. The 12-bit ADCC automates Capacitive Voltage Divider (CVD) for touch sensing, while CLCs allow logic-gate customization without external glue logic. Six DMA channels offload repetitive peripheral-to-memory transfers, freeing the CPU for higher-level tasks. Typical applications include industrial capacitive touch HMI, real-time motor control (BLDC, stepper), LED lighting and color-mixing controllers, low-power sensor nodes, and functional-safety subsystems where IEC 61508 compliance is required. The Q43 series targets designers replacing discrete analog timing/sequencing blocks with configurable on-chip peripherals. When designing, ensure the 5V-tolerant digital inputs are not driven beyond VDD+0.3V, and observe the supply-voltage ramp requirements of the ADCC. For capacitive touch, route the CVD pins away from high-noise digital traces and follow Microchip application note TB3139 for touch-PCB layout. This page synthesizes distributor pricing, drop-in alternatives in the same 44-TQFP footprint, and design guidance not found in the manufacturer datasheet summary alone.

RFQ İletişim
PIC18F45Q43T-I/MP - 8-bit MCU, 32KB Flash, 64MHz | Microchip
PIC18F45Q43T-I/MP

PIC18F45Q43T-I/MP - 8-bit MCU, 32KB Flash, 64MHz | Microchip

The Microchip Technology PIC18F45Q43T-I/MP is an 8-bit PIC18 microcontroller built on the enhanced mid-range core, offering 64 MHz operation (16 MIPS), 32 KB of Flash program memory, 2 KB of SRAM, and 1 KB of EEPROM in a 40-pin QFN package (5x5 mm). The part belongs to the PIC18-Q43 series, which combines versatile Core Independent Peripherals (CIPs) with advanced interconnection fabric so designers can implement sophisticated functions without CPU intervention. An 8-bit microcontroller (MCU) is a programmable microprocessor-on-a-chip optimized for embedded control. It integrates a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), EEPROM for parameter storage, and a rich set of peripherals such as timers, ADC, PWM, communication interfaces (UART, SPI, I2C), and increasingly, on-chip analog and logic peripherals. PIC18 devices sit in the hierarchy 8-bit MCU -> PIC18 family -> enhanced mid-range core -> low-power XLP technology platform. They are widely used for deterministic real-time control in industrial, automotive, consumer, and IoT products. Key features of the PIC18F45Q43 include three 16-bit dual-output PWMs (six PWM channels), a 12-bit ADC with computation (ADCC), an 8-bit DAC, comparators, six channels of DMA, vectored interrupts with fixed three-cycle latency, and high/low priority selection. The device operates from 1.8 V to 5.5 V, supports eXtreme Low Power (XLP) sleep currents in the nanoamp range, and integrates a 32 kHz internal oscillator plus a 64 MHz HFINTOSC for flexible clocking. Architecturally, the Q43 family is built around Core Independent Peripherals that can be chained through the Peripheral Pin Select (PPS) and event system to perform sensor reading, signal generation, and protection functions without waking the CPU. The result is reduced firmware complexity, deterministic interrupt response, and lower average power consumption. Memory-mapped configuration registers allow fine-grained tuning of analog, timing, and interconnect behavior. Typical applications include industrial sensor nodes, low-power IoT edge devices, motor and lighting control, USB-CDC human-interface devices, and consumer appliances requiring small footprint and tight code/data integration. The 40-pin QFN package suits space-constrained PCBs while exposing 36 I/O lines. For design success, place a 0.1 uF decoupling capacitor adjacent to each VDD pin and a bulk capacitor near the AVdd rail. Always configure unused pins as outputs low and use the PPS system to remap peripherals instead of hard-wiring signals. Verify in-circuit programming via ICSP requires dedicated PGC/PGD pins and proper MCLR pull-up design. This page aggregates distributor pricing, drop-in Q43 and Q10 alternatives, application guidance, and design notes not collected in any single manufacturer document.

RFQ İletişim
PIC18F4610-E/ML - 8-bit MCU, 64KB Flash, 44-QFN | Microchip
PIC18F4610-E/ML

PIC18F4610-E/ML - 8-bit MCU, 64KB Flash, 44-QFN | Microchip

The Microchip PIC18F4610-E/ML is an 8-bit PIC18 flash microcontroller built on the nanoWatt technology platform, integrating 64 KB of program flash memory and packaged in a 44-pin VQFN (HVQCCN) exposed-pad package. It operates at up to 40 MHz instruction clock and exposes the PIC18 enhanced instruction set with 16-bit-wide instructions. The device targets cost-sensitive embedded applications that need a generous peripheral set in a small footprint. An 8-bit microcontroller (MCU) is a self-contained processor core, program memory, data RAM, and on-chip peripherals integrated into a single IC; it executes instructions from embedded flash and interacts with the outside world through digital I/O, timers, ADC, and serial interfaces. The PIC18F4610 belongs to Microchip's PIC18F family, which sits between the legacy PIC16 mid-range family and the PIC24/dsPIC 16-bit families in the company's 8-bit and 16-bit MCU taxonomy. The 'E' temperature grade denotes an extended industrial range, while 'ML' identifies the 44-lead VQFN surface-mount package. Key features include 64 KB flash program memory, 3,968 bytes of RAM, 1 KB of EEPROM, a 10-bit ADC with up to 13 input channels, two USART modules, an SPI/I2C MSSP port, two CCP/ECCP modules, and a parallel slave port. nanoWatt technology offers multiple power-managed modes (Run, Idle, Sleep, deep Sleep) plus a software-selectable oscillator and PLL options for flexible power/performance tuning across battery and mains-powered designs. Architecturally, the PIC18F4610 uses an enhanced Harvard architecture with separate program and data buses and a hardware multiplier for 8x8 single-cycle operations. The high-endurance flash supports typical 10K erase/write cycles with self-programmability, enabling in-field firmware updates via ICSP and a dedicated bootloader region. Typical applications include industrial control panels, HVAC thermostats, sensor conditioning front-ends, USB/serial bridges, automotive body modules (non-safety), small home appliances, and instrumentation. The 44-QFN exposed pad supports tight PCB layouts while still providing thermal headroom for sustained CPU activity at full 40 MHz. Designers should note that the 44-pin QFN package has an exposed thermal pad that must be soldered to the PCB ground plane for electrical and thermal performance. Code development is supported by Microchip's MPLAB X IDE and the free XC8 compiler, with MPLAB PICkit 5 in-circuit debug/programming. This page synthesizes distributor stock, parametric alternatives, and practical design notes that complement the manufacturer datasheet.

RFQ İletişim
PIC18F4610-E/P - 8-bit MCU, 64KB Flash, 40MHz, 40-PDIP | Microchip
PIC18F4610-E/P

PIC18F4610-E/P - 8-bit MCU, 64KB Flash, 40MHz, 40-PDIP | Microchip

The Microchip Technology PIC18F4610-E/P is an 8-bit PIC18 RISC flash microcontroller with 64KB program memory, 3968 bytes of RAM, and 36 digital I/O pins, housed in a 40-pin PDIP through-hole package. It operates at up to 40MHz from a 4.2V to 5.5V supply and integrates a 10-bit ADC, nanoWatt power management, and Microchip's standard PIC18 peripheral set including USART, MSSP (SPI/I2C), CCP, and enhanced capture/compare/PWM modules. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. The PIC18 family uses an enhanced RISC instruction set with 16-bit opcodes and Harvard architecture, separating program and data memory for deterministic single-cycle execution. Microcontrollers sit at the bottom of the embedded compute hierarchy: MCU -> embedded controller -> semiconductor IC, and are the workhorse of cost-sensitive and power-aware designs. Key features of the PIC18F4610-E/P include 64KB (32K x 16) of self-programmable flash, 3968 bytes of data RAM, 1024 bytes of EEPROM, and 36 I/O lines that share package pins with peripherals. The integrated 10-bit ADC offers up to 13 input channels, and nanoWatt technology provides multiple sleep modes with current consumption down to the sub-microampere range. Architecturally, the PIC18F4610-E/P uses an enhanced Harvard core with a 31-level hardware stack, hardware multiplier, and dual oscillator options (primary and secondary) that allow fail-safe clock switching between HS, XT, LP, RC, and internal oscillator modes. The wide 4.2V-5.5V supply range and 25MHz-40MHz clock make it well suited to industrial 5V logic environments that legacy 3.3V ARM parts cannot directly address. Typical applications include industrial control panels, automotive body electronics, HVAC controllers, instrumentation, and consumer appliance user interfaces where 5V tolerance, generous I/O count, and long-term Microchip supply stability are deciding factors. When designing with this device, remember the -E suffix indicates the extended industrial temperature grade (-40C to +125C). Pair the MCU with MPLAB X IDE, XC8 compiler, and PICkit 5 or ICD 4 programmer/debugger for code development. Budget for adequate decoupling (100nF + 10uF bulk) close to VDD/VSS pins. This page synthesizes distributor pricing, drop-in PIC18F family alternatives, and practical design considerations that go beyond the manufacturer datasheet - particularly useful when comparing the -E extended-temp grade versus the -I industrial grade.

RFQ İletişim
PIC18F4610-E/PT - 8-Bit 25MHz MCU 64KB Flash 44-TQFP | Microchip
PIC18F4610-E/PT

PIC18F4610-E/PT - 8-Bit 25MHz MCU 64KB Flash 44-TQFP | Microchip

The Microchip PIC18F4610-E/PT is a high-performance 8-bit PIC18 microcontroller featuring a 25 MHz CPU core, 64 KB of Flash program memory (organized as 32K x 16), and 3.8 KB of RAM, housed in a 44-pin TQFP package (10x10 mm body). The device integrates nanoWatt power-management technology, an enhanced Flash memory controller, and a 10-bit Analog-to-Digital (A/D) converter, making it a versatile general-purpose MCU for embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die. The PIC18 family is Microchip's high-performance 8-bit architecture family with 16-bit wide instructions, RISC-style instruction set, and advanced peripherals such as CAN, USB, and enhanced capture/compare modules. MCUs belong to the broader category of embedded processors -> microcontrollers -> 8-bit microcontrollers -> PIC microcontrollers -> PIC18F microcontrollers. They serve as the central control element in countless embedded systems, executing firmware that drives I/O and peripherals. Key features of the PIC18F4610-E/PT include 36 digital I/O lines capable of sinking/sourceing up to 25 mA each, multiple communication peripherals (UART, SPI, I2C), a 10-bit A/D converter with up to 13 input channels, four timer modules, and a Capture/Compare/PWM (CCP) module. The E suffix indicates an extended temperature grade of -40C to +125C. The nanoWatt technology dynamically manages CPU clocking and peripheral operation to reduce active and idle current consumption, suiting battery-powered and power-sensitive designs. Technically, the PIC18F4610 uses a 16-bit modified Harvard architecture with separate program and data buses, an internal PLL option for flexible oscillator configurations, and an enhanced instruction set with multiply support. The Flash memory supports self-programming and ICSP (In-Circuit Serial Programming) for field firmware updates. Typical applications include industrial automation controllers, automotive body and climate control modules, consumer appliances, security and access control panels, and sensor-interface boards. Its extended temperature range and robust peripheral set make it suitable for harsh-environment embedded designs. When designing with this device, ensure the supply voltage remains within 4.2V to 5.5V and use proper decoupling (typically 100 nF + 10 uF) near the VDD pins. Configure the configuration bits correctly for oscillator source and watchdog settings. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC18F4610-I/P - 8-Bit 40MHz 64KB Flash MCU 40-PDIP | Microchip
PIC18F4610-I/P

PIC18F4610-I/P - 8-Bit 40MHz 64KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC18F4610-I/P is an 8-bit PIC18 microcontroller with 64KB of Flash program memory and 3968 bytes of RAM, running at up to 40MHz, housed in a 40-pin PDIP (DIP-40) through-hole package. The -I suffix denotes the industrial operating temperature range of -40C to +85C, and the /P suffix specifies the PDIP package option for prototyping and legacy designs. A PIC18 microcontroller is an 8-bit modified-Harvard RISC microcontroller family from Microchip, sitting within the broader taxonomy: microcontroller (MCU) -> embedded controller -> semiconductor IC. The PIC18 family extends the baseline PIC16 architecture with enhanced 16-bit instructions, linear memory addressing, C-compiler-friendly architecture, and rich peripheral integration including ADC, PWM, and multiple serial interfaces. Key features of the PIC18F4610 include 64KB (32K x 16) of self-programmable Flash, 3968 bytes of SRAM, 1024 bytes of EEPROM, 36 digital I/O pins, a 10-bit ADC with up to 13 input channels, two Enhanced USART modules, MSSP (SPI/I2C), two CCP/ECCP modules, two 8-bit timers plus three 16-bit timers, and two analog comparators. The Flash program memory supports self-programming under software control, enabling bootloaders and field firmware updates. Internally the PIC18F4610 uses a RISC architecture with a 16-bit instruction word (8-bit data path), an 8x8 hardware multiplier, a 31-level hardware stack, and an instruction set tuned for C compilers such as MPLAB XC8. The device operates from 2.0V to 5.5V across the full industrial temperature range, with nanoWatt power management features including idle and sleep modes that draw microamp-level current for battery applications. Typical applications include industrial control panels, sensor data acquisition, HVAC thermostat controllers, motor control boards, automotive body electronics, USB-to-UART bridges, and legacy educational platforms. The 40-pin PDIP package is favored for prototyping, through-hole assembly, breadboard-based development, and repair of legacy systems where socketed MCUs simplify firmware iteration. Development is supported by MPLAB X IDE, MPLAB XC8 compiler, and PICkit programmers. When designing with the PIC18F4610-I/P, ensure decoupling capacitors (100nF plus 10uF bulk) are placed within 10mm of the supply pins. Use the internal 8MHz oscillator with PLL to avoid external crystal cost, or attach a 20MHz crystal at the OSC1/OSC2 pins if precise timing is required. The /MCLR reset pin should be pulled high through a 10k resistor to VDD for clean power-on reset behavior. This page synthesizes distributor stock and pricing, drop-in compatible alternatives within the PIC18F family, and practical design notes not collated in the standalone manufacturer datasheet.

RFQ İletişim
PIC18F4610-I/PT - 8-bit 40MHz 64KB Flash MCU | Microchip
PIC18F4610-I/PT

PIC18F4610-I/PT - 8-bit 40MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC18F4610-I/PT is an 8-bit RISC microcontroller built on the PIC18F CPU core, delivering 40 MHz maximum clock speed with 64 KB of Flash program memory and 3968 bytes of data RAM, housed in a 44-pin TQFP (PT) package. It integrates a 10-bit ADC, nanoWatt power management, and 36 digital I/O pins, addressing the PIC18F high-tier performance segment between the PIC18F4520 and PIC18F4680 families. An 8-bit PIC18F microcontroller is a Harvard-architecture RISC device built around a 16-bit instruction word that simplifies code density while providing legacy 8-bit data paths. PIC18F series devices occupy the mid-tier of Microchip's 8-bit portfolio, above PIC16F but below dsPIC33 in computational performance, and they are widely used in industrial control, automotive body electronics, and consumer appliances where deterministic real-time behavior, low power, and rich peripheral integration are essential. nanoWatt Technology adds multiple idle/sleep modes to reduce quiescent current to microampere levels, enabling battery-friendly designs. Key features of the PIC18F4610-I/PT include 64 KB (32K x 16) Flash program memory, 3968 bytes of SRAM, 1024 bytes of EEPROM, 36 I/O pins, an internal 10-bit ADC with up to 13 channels, two USART, one MSSP (SPI/I2C), two CCP modules, one enhanced CCP, and four timer modules. The supply voltage range is 4.2 V to 5.5 V at industrial temperature grade (-40C to +85C), and the part supports in-circuit serial programming (ICSP) for field updates. The 8-bit RISC core executes most instructions in one cycle (4 clock cycles at 40 MHz oscillator), providing 10 MIPS throughput. The 16-bit instruction path keeps code density high while the 8-bit data path keeps peripheral behavior compatible with legacy PIC designs. nanoWatt modes include Run, Idle, Sleep, and several low-power timer-driven states; combined with a 4.2 V minimum supply, this makes the part suitable for industrial 5V rails. The device also offers two capture/compare and one enhanced capture/compare/PWM module for motor or lighting control. Typical applications include industrial automation (PLCs, sensor conditioning, motor control loops), automotive body electronics (HVAC actuators, instrument clusters), consumer appliances (washing machines, induction cookers), USB-keyboard-style HID firmware, and general-purpose embedded controls where 8-bit determinism is preferred over ARM Cortex-M0. The 10-bit ADC and 36 I/O pins support multi-channel sensor front-ends in industrial IoT endpoints. When designing with this device, reserve 10-15% of Flash for a robust bootloader (ICSP-friendly) and verify Vdd ramp-time against the brown-out reset (BOR) trip point. The 44-pin TQFP provides 36 usable I/O, so plan pin allocation early when migrating from a 40-pin PIC18F4520 because the additional 4 pins unlock more peripheral options. Decouple Vdd/Vss with a 100 nF ceramic per pin pair within 5 mm of the package. This page synthesizes distributor pricing, drop-in same-package alternatives from Microchip, and practical PCB-level design notes that the bare manufacturer datasheet does not aggregate, helping engineers shorten the selection cycle for a 5V-class 8-bit MCU upgrade or replacement.

RFQ İletişim
PIC18F4610T-I/PT - 64KB Flash 8-bit MCU | Microchip | TQFP-44
PIC18F4610T-I/PT

PIC18F4610T-I/PT - 64KB Flash 8-bit MCU | Microchip | TQFP-44

The Microchip Technology PIC18F4610T-I/PT is an 8-bit PIC microcontroller built on Microchip's enhanced RISC architecture with nanoWatt technology, delivering 10 MIPS performance at 40 MHz in a 44-pin TQFP (PT) package. It integrates 64 KB of Flash program memory (32K x 16 words), 3968 bytes of SRAM, and 1024 bytes of EEPROM, providing ample storage for embedded firmware with in-system self-programmability. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, I/O peripherals, and supporting logic on one integrated circuit. The PIC18F family belongs to the broader 8-bit microcontroller category, which sits beneath 16-bit and 32-bit MCU families in performance, but excels in deterministic interrupt latency, low power consumption, and small code size. PIC18F MCUs target general-purpose embedded applications including industrial control, consumer appliances, and automotive body electronics. Key features of the PIC18F4610 include 36 digital I/O pins, a 10-bit ADC with up to 13 channels, two analog comparators, two CCP (Capture/Compare/PWM) modules, one enhanced CCP, a hardware USART, an MSSP (SPI/I2C) port, two 8-bit timers and three 16-bit timers. The nanoWatt technology offers multiple power-managed operating modes (Run, Idle, Sleep) with typical Sleep current below 100 nA, enabling battery-powered designs. The device supports industrial temperature range (-40C to +85C), operates from 2.0 V to 5.5 V, and is qualified to Microchip's standard product roadmap. The 'T' suffix denotes Tape & Reel packaging, 'I' denotes industrial temperature grade, and 'PT' identifies the 44-pin TQFP package. The internal PLL provides 4x multiplication of the external clock, allowing low-frequency crystals to drive the 40 MIPS core. Typical applications include industrial sensor interfacing, HVAC control, small appliance control panels, USB device controllers (with external interface IC), smart card readers, automotive body modules, and general-purpose data acquisition systems. The high memory density (64 KB Flash) supports protocol stacks and graphical user interfaces in cost-sensitive products. When designing with this MCU, allocate sufficient decoupling (100 nF ceramic + bulk) near each VDD/VSS pair and follow Microchip's recommended PCB layout for the analog and oscillator pins. The ICD/ICSP programming/debug interface requires dedicated RB6/RB7 pins; reserve these in your pin allocation even if not used in the final application to enable in-circuit debugging. This page synthesizes distributor pricing, drop-in PIC18F-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim