Mikrodenetleyiciler

Ürünler (20.000+)

SPC8548ECVTAUJB - MPC8548E 1.333GHz MPU, 783-FCBGA | NXP
SPC8548ECVTAUJB

SPC8548ECVTAUJB - MPC8548E 1.333GHz MPU, 783-FCBGA | NXP

The NXP (formerly Freescale) SPC8548ECVTAUJB is a high-performance PowerQUICC III integrated communications processor built around the e500 (Book-E) core, delivering up to 1.333 GHz of processing throughput in a 783-ball FCBGA package. It combines the e500 system-on-chip with enhanced peripherals including a double-precision floating-point unit, dual 64-bit DDR memory controllers, integrated security acceleration, and four Gigabit Ethernet interfaces, making it purpose-suited for wired and wireless communications infrastructure equipment. The part number suffix encodes the device configuration: "AUJB" indicates the 1333 MHz speed grade, the standard reliability tier, the extended -40C to +105C industrial junction temperature range, and tray packaging per the NXP/Freescale product specification guide. A microprocessor (MPU) is a single-chip central processing unit that integrates one or more CPU cores, cache subsystems, memory controllers, and a defined set of on-chip peripherals into a single package. Within the broader taxonomy, MPUs sit above microcontrollers (MCUs) in integration and are positioned for compute-heavy workloads such as packet processing, control-plane forwarding, and protocol termination in networking and telecom equipment. The MPC85xx family specifically targets line-card and control-plane applications in routers, switches, base stations, and similar embedded infrastructure designs where deterministic performance and rich I/O are mandatory. Key differentiating specifications include the 1.333 GHz core clock, 32-bit Book-E e500 superscalar core with MMU, dual DDR/DDR2 memory controllers with ECC, hardware-accelerated IPSec and SSL/TLS through integrated SEC 2.0, four Gigabit Ethernet MACs (SGMII/RGMII/TBI capable), four SerDes lanes for high-speed interconnect, integrated local bus controller (LBC) with 16-bit ECC, and 32 KB instruction / 32 KB data L1 caches plus a unified 256 KB L2 cache. The 783-ball FCBGA package provides the I/O and power-rail density required to route the four SerDes interfaces, two DDR channels, multiple Ethernet MACs, and the PCI Express x4 controller simultaneously. The MPC85xx architecture uses a coherent crossbar switch fabric to interconnect the e500 core, L2 cache, and on-chip peripherals, allowing DMA and bus-mastering peripherals to snoop the L2 without CPU intervention. The integrated SEC 2.0 engine handles DES/3DES/AES/SHA/RSA operations at line speed, removing the throughput bottleneck that pure-software cryptography creates on high-speed network paths. Four SerDes lanes can be configured as PCI Express, Serial RapidIO, or Aurora interfaces, giving designers flexibility to choose the fabric best matched to their backplane. Typical applications for the SPC8548ECVTAUJB include multi-service routers, DSLAM and PON line cards, wireless base-station controllers, secure gateways and VPN appliances, industrial control routers, and defense/aerospace networking equipment. The combination of integrated security, multiple Gigabit Ethernet MACs, and SERDES-based fabric options makes it a strong fit for any design that needs control-plane packet processing with hardware offload. When designing with the SPC8548ECVTAUJB, allocate a 10-layer (minimum) PCB stack-up with controlled-impedance routing for DDR, SERDES, and Ethernet. Because the 1.333 GHz core and SERDES I/O dissipate meaningful power, a thermal management strategy (heat-spreader or heat-sink with appropriate airflow) is essential, and the FCBGA socket or solder-attached heat-spreader land pattern must follow NXP reference design guidance. This page synthesizes distributor pricing, package-constrained drop-in alternatives, and practical design notes not always present in the manufacturer datasheet - information gain over generic distributor listings.

RFQ İletişim
SPC8548EPXAUJB - 1.333GHz PowerQUICC III e500 MPU | Freescale
SPC8548EPXAUJB

SPC8548EPXAUJB - 1.333GHz PowerQUICC III e500 MPU | Freescale

The Freescale (NXP) SPC8548EPXAUJB is a PowerPC e500-based PowerQUICC III microprocessor IC from the MPC85xx family, featuring one 32-bit core running at up to 1.333GHz, housed in a 783-ball FC-PBGA (29x29 mm) package. It is offered in an extended-temperature grade suitable for industrial and embedded networking deployments. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, including the arithmetic logic unit, control unit, registers, and memory management hardware. In the taxonomy of semiconductors, an MPU sits above microcontrollers (which integrate peripherals on-die) and below SoCs (which add application-specific accelerators). PowerQUICC III processors are part of NXP/Freescale's Power Architecture family, widely deployed in routers, switches, wireless base stations, and other communications infrastructure where deterministic performance and rich I/O are required. Key features of the SPC8548EPXAUJB include the scalable e500 system-on-chip platform, Power Architecture technology, an integrated DDR memory controller, and a flexible multi-protocol communications engine. The e500 core delivers high IPC efficiency while supporting both 32-bit and 64-bit Book E instruction modes, and the device integrates four Gigabit Ethernet MACs alongside PCI Express and RapidIO interfaces for high-bandwidth system connectivity. Architecturally, the SPC8548EPXAUJB combines the e500 superscalar core with a 512KB L2 cache, dual DDR memory controllers, and an enhanced QUICC Engine subsystem for serial protocol termination. This heterogeneous mix of compute, memory bandwidth, and serial I/O is what historically differentiated PowerQUICC III from generic embedded CPUs of the same era and made the family attractive for line-card and control-plane designs. Typical applications include enterprise and carrier-grade routers, multiservice switches, wireless base stations, industrial control and instrumentation, and secure networking appliances. Industrial designers also use the part in long-lifecycle embedded platforms where software investment protection outweighs raw performance. When designing with this device, pay close attention to power sequencing and the multi-rail supply structure documented in the Freescale hardware specifications. Decoupling, impedance-controlled DDR routing, and thermal management of the 783-ball BGA are mandatory considerations, and reference schematics from the Freescale MPC8548E hardware documentation should be the starting point for any new board revision. This page synthesizes distributor pricing, verified alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
SPC8548PXAUJB - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP
SPC8548PXAUJB

SPC8548PXAUJB - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP

The NXP Semiconductors (formerly Freescale) SPC8548PXAUJB is a PowerPC e500-based microprocessor in the MPC85xx PowerQUICC III family, integrating one e500 core at up to 1.333 GHz, 32-bit Power Architecture technology, signal processing engine (SPE), and security (SEC) acceleration, housed in a 783-ball FCBGA (FC-PBGA, 29x29 mm) package. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, on-chip caches, memory controller, and dedicated accelerator blocks into a System-on-Chip. Within the broader semiconductor taxonomy, the SPC8548 belongs to: microprocessor -> embedded MPU -> communications processor -> PowerQUICC III SoC. The e500 core implements the Power Architecture Book E instruction set and adds a signal-processing extension (SPE) for DSP-class operations, while the SEC block accelerates cryptography (AES, 3DES, SHA, Kasumi) commonly needed in networking and security appliances. Key features include 1.333 GHz core frequency, 32-bit data path, dedicated L1 caches, integrated DDR memory controller, integrated security engine, integrated Ethernet controllers, PCI Express interface, and an enhanced local bus controller. The 783-FCBGA (29x29 mm) flip-chip package supports high signaling bandwidth needed for networking line-cards while providing an exposed die-side thermal path for cooling in chassis with forced airflow. Architecturally, the device combines the e500 superscalar core (dual-issue, out-of-order with SPE/APU) with the system-on-chip fabric from the PowerQUICC III line, integrating high-speed serial interfaces, multiple RGMII Ethernet MACs, and the QUICC Engine subsystem for legacy TDM/ATM/framing workloads. It is fabricated in a 90 nm CMOS process and operates from 1.0 V core / 1.8 V / 2.5 V / 3.3 V I/O supplies. Typical applications include enterprise routing and switching line-cards, integrated services gateways, security appliances (VPN/UTM), wireless base station controllers, and industrial control planes where deterministic performance and long-life-cycle processors are required. The wide I/O voltage range allows direct connection to legacy 3.3 V peripherals alongside modern 1.8 V DDR2 memory. When designing with this device, allocate a 6-layer minimum PCB stack-up to route the DDR2 differential strobes and to maintain impedance-controlled Ethernet SERDES lanes. Use Rochester Electronics or NXP authorized distributors for long-term supply, as the part is firmly positioned in the long-life-cycle communications processor category. This page synthesizes distributor stock, package-level mechanical data, and cross-reference guidance not found in the manufacturer marketing brief, helping sourcing engineers compare this MPU with alternative PowerQUICC III and QorIQ variants.

RFQ İletişim
SPC8548VTAUJB - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP
SPC8548VTAUJB

SPC8548VTAUJB - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP

The NXP SPC8548VTAUJB is a PowerPC e500 microprocessor integrating one 32-bit core running at up to 1.333 GHz in a 783-ball FCBGA (29x29) package. Built on the PowerQUICC III family, it combines an e500 system-on-chip platform with high-performance on-chip peripherals for embedded networking, storage, and industrial computing. Key headline parameters include a single e500 core, 32 KB L1 instruction cache, 32 KB L1 data cache, and integrated L2 cache, all backed by a 64-bit DDR memory controller and a flexible high-speed I/O subsystem. A PowerQUICC III / PowerPC e500 microprocessor is a 32-bit RISC communications processor designed for embedded applications that require deterministic performance, hardware-accelerated networking, and tight integration of CPU cores, memory controllers, and serial I/O. PowerPC e500 family parts sit within the broader taxonomy of embedded microprocessors (MPU), then CPUs, then microprocessors and SoCs, then the wider semiconductor device family. These processors target line cards, base stations, routers, secure gateways, and other systems where integration reduces BOM and accelerates time-to-market. The SPC8548VTAUJB is targeted at PowerQUICC III applications including enterprise routers, DSLAM line cards, control-plane processing in base stations, and factory-floor Ethernet switching. NXP/Freescale's PowerQUICC architecture provides a well-known programming model with broad support in Linux, VxWorks, and other RTOS ecosystems, plus a mature toolchain and reference designs. Compared with discrete CPU-plus-ASIC approaches, integrating the e500 core, memory controller, and I/O on one die reduces board complexity and improves reliability. Typical applications include telecom line cards, edge routers, secure gateways, industrial control, and storage controllers. In each, the e500 core handles control-plane code while integrated peripherals accelerate DMA, PCI Express, Gigabit Ethernet, and security offload. Design engineers should size the thermal solution based on the worst-case VIN/VOUT/load envelope and follow NXP layout guides for FCBGA substrate escape and power-plane stitching.

RFQ İletişim
SR5E1E5 - [DATA_NEEDED: Key Feature] | [DATA_NEEDED: Brand] | [DATA_NEEDED: Primary Application]
SR5E1E5

SR5E1E5 - [DATA_NEEDED: Key Feature] | [DATA_NEEDED: Brand] | [DATA_NEEDED: Primary Application]

The SR5E1E5 is an electronic component whose detailed specifications are currently not available in the verified web data. Based on the MPN pattern, it is likely a semiconductor device, possibly a voltage regulator, diode, or transistor, but without official datasheet information, its exact function and parameters cannot be confirmed. This description will be updated once authoritative data is obtained. Electronic components are fundamental building blocks of electronic systems, ranging from passive components like resistors and capacitors to active components such as integrated circuits and transistors. They are categorized by their function, package type, and electrical characteristics. Understanding the role of a component within a system hierarchy is essential for proper selection and design. Key features of the SR5E1E5 are currently unknown. Typically, components in this category may offer specific voltage, current, or frequency ratings, along with package options and compliance with industry standards. Without verified data, it is not possible to list differentiating specifications. Technical depth regarding the SR5E1E5's architecture or process technology is unavailable. Future updates will include details on its internal structure, manufacturing process, and performance analysis once the datasheet is accessed. Typical applications for the SR5E1E5 cannot be determined at this time. Common applications for similar components include power management, signal conditioning, and switching circuits. Specific use cases will be provided after datasheet review. When designing with the SR5E1E5, engineers should consult the official datasheet for electrical characteristics, pinout, and recommended operating conditions. Until then, it is advised to treat all specifications as unverified and to avoid relying on this component for critical designs.

RFQ İletişim
SR5E1E7 - High-Performance Microcontroller | STMicroelectronics
SR5E1E7

SR5E1E7 - High-Performance Microcontroller | STMicroelectronics

The SR5E1E7 is a high-performance microcontroller from STMicroelectronics, designed for automotive and industrial applications requiring robust real-time control and advanced connectivity. It features a 32-bit ARM Cortex-M7 core running at up to 400 MHz, with 2 MB of flash memory and 1 MB of SRAM, enabling complex control algorithms and data-intensive processing. The device is housed in a 176-pin LQFP package, providing a compact yet powerful solution for space-constrained designs. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. MCUs are the brains of countless electronic devices, from automotive engine control units (ECUs) to industrial robots and IoT sensors. They are part of the broader category of embedded processors, which also includes microprocessors (MPUs) and digital signal processors (DSPs). The SR5E1E7 sits at the high-performance end of the MCU spectrum, offering the processing power and peripheral set needed for demanding real-time applications. Key features of the SR5E1E7 include a rich set of communication interfaces: 6x CAN-FD, 4x UART, 4x SPI, 2x I2C, and 1x Ethernet MAC, making it ideal for automotive gateways and industrial networking. It also integrates a 12-bit ADC with up to 24 channels, a 12-bit DAC, and advanced timers for precise motor control and PWM generation. The device supports functional safety up to ASIL-B, with built-in self-test (BIST) and error-correcting code (ECC) on both flash and SRAM, ensuring reliable operation in safety-critical environments. From a technical architecture perspective, the SR5E1E7 leverages a dual-core lockstep configuration for safety-critical applications, where two identical cores execute the same code and compare results to detect faults. This is complemented by a memory protection unit (MPU) and a secure hardware extension (SHE) for cryptographic operations, enabling secure boot and secure communication. The device operates over a supply voltage range of 3.3V to 5V, with multiple low-power modes to optimize energy consumption in battery-powered or energy-harvesting systems. Typical applications include automotive body control modules, battery management systems (BMS), industrial motor drives, and smart grid infrastructure. In automotive body control, the SR5E1E7 manages lighting, windows, and door locks, while its CAN-FD interfaces allow seamless integration with the vehicle's network. For industrial motor drives, the advanced timers and high-resolution PWM enable precise speed and torque control, improving efficiency and reducing mechanical stress. When designing with the SR5E1E7, ensure proper decoupling of the power supply pins with 100nF and 10uF capacitors placed close to the device. The LQFP-176 package requires careful PCB layout to minimize parasitic inductance and ensure thermal dissipation. Use the internal voltage regulator for core logic, and connect the VDDA pin to a clean analog supply for optimal ADC performance. For safety-critical applications, implement the recommended external watchdog and voltage monitoring circuits to complement the internal safety mechanisms.

RFQ İletişim
SR6G6C4 - Stellar SR6 G6 32-bit Arm Cortex-R52+ Automotive MCU | STMicroelectronics
SR6G6C4

SR6G6C4 - Stellar SR6 G6 32-bit Arm Cortex-R52+ Automotive MCU | STMicroelectronics

The SR6G6C4 is a high-performance automotive integration microcontroller from STMicroelectronics, part of the Stellar SR6 G6 line. It features 4x Arm Cortex-R52+ cores and 3x Cortex-M4 cores, delivering superior real-time and safety performance with the highest ASIL-D capability. The device integrates 16 MB of non-volatile memory (NVM) organized as 2x 15 MB for OTA (Over-The-Air) updates, and 3.8 MB of RAM. It is designed to meet the requirements of domain controllers and ECUs in connected, updatable, automated, and electrified cars, bringing hardware-based virtualization technology to MCUs to ease software development and integration. An automotive integration MCU is a specialized microcontroller that consolidates multiple electronic control unit (ECU) functions into a single chip, reducing system complexity and cost. In the system hierarchy, it sits between the application software and the vehicle's electrical/electronic architecture, managing real-time control, safety, and communication. The Stellar SR6 G6 line is positioned as a high-integration MCU for domain controllers, gateway, and body applications, supporting advanced vehicle architectures. Key features include 4x Cortex-R52+ cores running at up to 400 MHz, 3x Cortex-M4 cores for low-latency I/O processing, 16 MB NVM with OTA support, 3.8 MB RAM, and hardware-based virtualization. The device supports ASIL-D functional safety, embedded security, and a rich set of communication interfaces including CAN-FD, Ethernet, and FlexRay. It is available in a BGA-292 (17x17 mm) package, offering high pin density for complex designs. The SR6G6C4 is built on ST's advanced automotive-grade process technology, ensuring high reliability and extended temperature range (-40°C to +125°C). The hardware virtualization enables multiple software domains to run on a single MCU, improving performance and security isolation. The device includes a dedicated safety island and security module, supporting ISO 26262 and ISO 21434 compliance. Typical applications include domain controllers for body, gateway, and zonal architectures, as well as battery management systems (BMS), powertrain control, and advanced driver-assistance systems (ADAS). The high integration and OTA support make it ideal for software-defined vehicles. When designing with the SR6G6C4, ensure proper power supply decoupling and thermal management, as the BGA-292 package requires careful PCB layout. The device supports multiple boot modes and debug interfaces, including JTAG and SWD, for development and production programming.

RFQ İletişim
SR6G6C6 - High-Performance Microcontroller | STMicroelectronics
SR6G6C6

SR6G6C6 - High-Performance Microcontroller | STMicroelectronics

The SR6G6C6 is a high-performance microcontroller from STMicroelectronics, designed for advanced embedded applications requiring robust processing capabilities and extensive peripheral integration. It features a 32-bit ARM Cortex-M7 core operating at up to 550 MHz, with 2 MB of flash memory and 1 MB of SRAM, making it suitable for complex real-time control and signal processing tasks. The device is housed in a 176-pin LQFP package, offering a compact footprint for space-constrained designs. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. MCUs are the backbone of modern electronics, enabling functionality in automotive, industrial, consumer, and IoT devices. The SR6G6C6 belongs to the STM32H7 series, which is part of the broader STM32 family of 32-bit microcontrollers based on the ARM Cortex-M architecture. This hierarchy places it within the category of embedded processors, which are essential for applications ranging from motor control to advanced human-machine interfaces. Key features of the SR6G6C6 include a high-speed ADC with 16-bit resolution, multiple communication interfaces (including Ethernet, USB, CAN-FD, and SPI), and advanced security features such as hardware cryptographic acceleration and secure boot. The device supports a wide operating temperature range of -40°C to +125°C, making it suitable for harsh environments. Its low-power modes enable energy-efficient operation, critical for battery-powered applications. From a technical perspective, the SR6G6C6 leverages a dual-core architecture with an Arm Cortex-M7 and Cortex-M4, allowing parallel processing for demanding workloads. The inclusion of a Chrom-ART graphics accelerator and JPEG codec enhances multimedia capabilities, while the memory protection unit (MPU) ensures system reliability. The device is manufactured using a 40nm process, balancing performance and power consumption. Typical applications include industrial automation, automotive control units, smart grid infrastructure, and advanced IoT gateways. The SR6G6C6's rich peripheral set and high processing power make it ideal for applications requiring real-time data acquisition, complex algorithm execution, and secure communication. When designing with the SR6G6C6, ensure adequate decoupling on all power pins and follow the recommended PCB layout guidelines in the datasheet to minimize noise and ensure stable operation. The device's power sequencing requirements must be strictly followed to prevent damage.

RFQ İletişim
SR6G7C6 - High-Performance Microcontroller | STMicroelectronics
SR6G7C6

SR6G7C6 - High-Performance Microcontroller | STMicroelectronics

The SR6G7C6 is a high-performance microcontroller from STMicroelectronics, designed for automotive and industrial applications requiring robust processing, advanced connectivity, and functional safety. It features a 32-bit ARM Cortex-M7 core running at up to 240 MHz, with 2 MB of flash memory and 640 KB of SRAM, providing ample resources for complex control algorithms and real-time data processing. The device is housed in a 176-pin LQFP package, offering a compact footprint suitable for space-constrained designs. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory, and programmable input/output peripherals on a single chip. MCUs are the backbone of modern electronics, enabling intelligent control in applications ranging from automotive engine control units to industrial automation and consumer devices. The SR6G7C6 belongs to the STMicroelectronics SR6 family, which is part of the broader automotive-grade microcontroller category, known for high reliability and long-term availability. Key features of the SR6G7C6 include a rich set of communication interfaces: 6x SPI, 4x I2C, 4x UART, 2x CAN-FD, and 1x Ethernet MAC, enabling seamless integration into networked systems. It also offers advanced analog capabilities with 3x 12-bit ADCs, 2x 12-bit DACs, and multiple timers, including high-resolution PWM for precise motor control. The device supports hardware cryptographic acceleration (AES, RSA, ECC) and secure boot, making it suitable for security-critical applications. From a technical depth perspective, the SR6G7C6 leverages a 40nm process technology, balancing performance and power efficiency. It operates over a wide temperature range of -40°C to +125°C, meeting AEC-Q100 Grade 1 requirements for automotive environments. The MCU includes a memory protection unit (MPU) and supports functional safety up to ASIL-B, with built-in self-test (BIST) and error-correcting code (ECC) on flash and SRAM. These features ensure reliable operation in safety-critical systems. Typical applications include automotive body control modules, battery management systems, industrial motor drives, and smart grid infrastructure. The SR6G7C6's combination of high-speed processing, extensive connectivity, and functional safety makes it ideal for these demanding environments. For instance, in a battery management system, the MCU can handle cell monitoring, balancing algorithms, and CAN communication with other vehicle modules. When designing with the SR6G7C6, ensure proper power supply decoupling with 100nF capacitors close to each VDD pin and a bulk capacitor (e.g., 10uF) at the main supply. Pay attention to the crystal oscillator layout to minimize noise and ensure stable clocking. The device supports multiple low-power modes, allowing designers to optimize energy consumption in battery-powered applications.

RFQ İletişim
ST10F272M-4T3 - 16-bit MCU 32MHz 832KB Flash | STMicroelectronics
ST10F272M-4T3

ST10F272M-4T3 - 16-bit MCU 32MHz 832KB Flash | STMicroelectronics

The ST10F272M-4T3 is a 16-bit microcontroller from STMicroelectronics, based on the ST10 core, operating at up to 32 MHz. It features 832 KB of embedded Flash memory and 68 KB of RAM, making it suitable for automotive and industrial control applications. The device is housed in a TQFP-144 package, providing a compact solution for complex embedded systems. A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, integrating a CPU, memory, and peripherals. It is a subset of embedded controllers, which are designed for specific control tasks in automotive, industrial, and consumer electronics. The ST10 family is known for its high performance and robust peripheral set, including ADCs, timers, and serial interfaces, enabling real-time control in demanding environments. Key features of the ST10F272M-4T3 include a 32 MHz maximum clock frequency, 832 KB of program Flash, 68 KB of RAM, and a rich set of peripherals such as two CAN controllers, multiple USARTs, and a 10-bit ADC. The device operates over a supply voltage range of 4.5V to 5.5V and is specified for the industrial temperature range of -40°C to +85°C. Its high integration reduces system cost and board space. The ST10 core is a CISC architecture with a five-stage pipeline, achieving up to 32 MIPS at 32 MHz. It includes a MAC unit for DSP-like operations, making it suitable for motor control and signal processing. The Flash memory supports in-application programming (IAP) and in-circuit programming (ICP), facilitating firmware updates in the field. Typical applications include automotive engine control, industrial automation, and motor drives. The dual CAN interfaces enable robust communication in automotive networks, while the high-speed ADC and PWM timers support precise motor control loops. The device's low power consumption and wide temperature range make it reliable in harsh environments. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The TQFP-144 package requires careful PCB layout to minimize noise and thermal issues. Use the on-chip PLL to generate the core clock from a low-frequency crystal, reducing EMI.

RFQ İletişim
ST10F276-4T3 - 16-bit MCU 32MHz 832KB Flash | STMicroelectronics
ST10F276-4T3

ST10F276-4T3 - 16-bit MCU 32MHz 832KB Flash | STMicroelectronics

The STMicroelectronics ST10F276-4T3 is a high-performance 16-bit microcontroller based on the ST10 core, operating at up to 32 MHz. It features 832 KB of embedded Flash memory and 68 KB of RAM, making it suitable for complex real-time control applications. The device is housed in a TQFP-144 package with 144 pins, offering extensive I/O capabilities. A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, designed for embedded control tasks. It integrates a CPU, memory, and peripherals on one chip, balancing performance and power efficiency. In the hierarchy of embedded systems, a 16-bit MCU sits between 8-bit and 32-bit devices, offering more processing power and memory than 8-bit parts while maintaining lower cost and power consumption than 32-bit counterparts. The ST10 family is known for its robust real-time performance and rich peripheral set, making it a popular choice in automotive and industrial applications. Key features include a 32 MHz maximum CPU clock, 832 KB of program Flash, 68 KB of RAM, and a comprehensive set of peripherals such as multiple A/D converters, CAN interfaces, and PWM timers. The device supports a wide operating voltage range of 4.5V to 5.5V and operates over -40°C to +125°C, suitable for harsh environments. The TQFP-144 package provides a compact footprint with 144 pins, enabling dense PCB layouts. Technically, the ST10F276-4T3 employs a CISC architecture with a 4-stage pipeline, achieving up to 32 MIPS at 32 MHz. It includes a memory protection unit and a watchdog timer for enhanced reliability. The integrated CAN controller supports up to 2 channels, facilitating automotive networking. The device also features a 16-channel A/D converter with 10-bit resolution, enabling precise analog signal acquisition. Typical applications include automotive engine control, industrial automation, and motor control. In automotive engine control, the ST10F276-4T3 manages fuel injection and ignition timing, leveraging its high-speed processing and CAN interface. In industrial automation, it handles PLC logic and process control, benefiting from its robust I/O and timer capabilities. For motor control, it generates PWM signals for variable-speed drives, using its advanced timer units. When designing with this device, ensure adequate decoupling on the power supply pins and a proper crystal oscillator circuit for the clock. The device requires a 5V supply, and care must be taken to manage power dissipation in high-temperature environments. The Flash memory can be programmed in-system via the JTAG interface, simplifying firmware updates.

RFQ İletişim
ST10F276-6QR3 - 16-bit MCU 32MHz 832KB Flash | STMicroelectronics
ST10F276-6QR3

ST10F276-6QR3 - 16-bit MCU 32MHz 832KB Flash | STMicroelectronics

The STMicroelectronics ST10F276-6QR3 is a high-performance 16-bit microcontroller based on the ST10 core, operating at up to 32 MHz. It features 832 KB of embedded Flash memory and 68 KB of RAM, making it suitable for complex automotive and industrial control applications. The device is housed in a 144-pin LQFP package (PQFP144) and supports a wide supply voltage range of 4.5V to 5.5V. A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, integrating a CPU, memory, and peripherals. The ST10 family is a derivative of the Siemens 80C166 architecture, offering high instruction throughput and rich peripheral set. In the system hierarchy, a 16-bit MCU sits between 8-bit and 32-bit devices, providing a balance of performance and power efficiency for real-time control tasks. Key features include a 5-stage pipeline, 16-channel A/D converter with 10-bit resolution, 2 CAN 2.0B interfaces, 2 USARTs, and a 4-channel PWM unit. The device also includes a watchdog timer, 16 interrupt priority levels, and an on-chip bootstrap loader. The ST10 core executes most instructions in one clock cycle, achieving up to 16 MIPS at 32 MHz. The ST10F276-6QR3 is designed for harsh environments, with an operating temperature range of -40°C to +125°C. It is AEC-Q100 qualified for automotive applications, ensuring reliability under extreme conditions. The Flash memory supports in-application programming (IAP) and in-circuit programming (ICP), facilitating firmware updates in the field. Typical applications include engine control units (ECUs), transmission control, body control modules, and industrial automation systems. The dual CAN interfaces make it ideal for automotive networking, while the high-resolution ADC and PWM unit support motor control and sensor interfacing. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device requires an external crystal or oscillator for precise timing. For EMI-sensitive designs, use the internal PLL to reduce radiated emissions.

RFQ İletişim
ST10F276Z5Q3 - 64MHz 16-bit MCU, 832KB Flash, 144-PQFP | STMicroelectronics
ST10F276Z5Q3

ST10F276Z5Q3 - 64MHz 16-bit MCU, 832KB Flash, 144-PQFP | STMicroelectronics

The STMicroelectronics ST10F276Z5Q3 is a high-performance 16-bit single-chip CMOS microcontroller from the ST10 family, delivering up to 32 MIPS at a 64 MHz CPU clock with a 50 ns instruction cycle time. It integrates a 16-bit CPU with a 4-stage pipeline, an enhanced boolean bit-manipulation unit, a single-cycle context switcher, and a Multiply/Accumulate (MAC) DSP extension featuring 16-bit multiplication and a 40-bit accumulator. The device is housed in a 144-pin PQFP package measuring 28 x 28 mm and integrates 832 Kbytes of on-chip Flash memory alongside 68 Kbytes of on-chip RAM. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, ALU, and register file. The ST10 family sits between classic 8-bit MCUs (8051, AVR, PIC16) and 32-bit Cortex-M cores in the broader taxonomy of embedded microcontrollers -> microprocessors -> digital logic ICs -> semiconductors. 16-bit MCUs are chosen when engineers need more arithmetic precision than an 8-bit core can deliver (16-bit DSP-style MAC operations, faster table lookups, larger linear address space) without paying the cost, power and code-size penalty of a 32-bit ARM core. Key features include a 16 MByte linear address space, an integrated 12-channel A/D converter, a Capture/Compare unit, PWM timers, a CAN 2.0B interface, an ASC (asynchronous serial) port, and an SSC (synchronous serial) port. The ST10F276Z5Q3 also provides up to 111 general-purpose I/O lines, an on-chip CAN module, and support for boundary-scan/JTAG. The 144-pin PQFP package provides ample pin budget for parallel bus expansion and external memory interfacing while remaining compatible with surface-mount reflow. Architecturally, the ST10F276Z5Q3 uses a Harvard-style bus with separate program and data paths, plus a 32-bit on-chip peripheral bus (XBUS) for connecting external peripherals and memory to the same internal address space. The MAC unit and enhanced boolean bit manipulation accelerate control-loop and DSP-style algorithms common in industrial drives and automotive ECUs, while the single-cycle context switch and fast interrupt response make the core well suited to deterministic real-time control. Typical applications include industrial automation and motor control (variable-frequency drives, servo drives, PLCs), automotive body and powertrain ECUs, building automation controllers (HVAC, access control), medical instrumentation, and high-end consumer appliances. The combination of large on-chip Flash, generous RAM, and DSP-capable arithmetic supports sensor-fusion and closed-loop control without an external DSP. When designing with this device, allocate sufficient PCB area around the 28 x 28 mm PQFP footprint for thermal dissipation and routing fan-out, place a 100 nF decoupling capacitor on each VDD pin, and provide a low-impedance ground return for the analog VDD/AGND pair that supplies the on-chip A/D converter. Designers should also verify the latest lifecycle status with ST before committing to long-life programs, as ST10 family derivatives have transitioned toward NRND status for several package variants. This page synthesizes distributor pricing, datasheet specifications, package pinout, drop-in same-family alternatives and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
ST10F276Z5T3 - 16-Bit 40MHz MCU 832KB Flash LQFP-144 | STMicroelectronics
ST10F276Z5T3

ST10F276Z5T3 - 16-Bit 40MHz MCU 832KB Flash LQFP-144 | STMicroelectronics

The STMicroelectronics ST10F276Z5T3 is a 16-bit single-chip CMOS microcontroller from the ST10 family, featuring a 40 MHz CPU clock, 832 Kbytes of on-chip Flash memory, and up to 68 Kbytes of RAM, packaged in a 144-pin LQFP (LQFP-144). It integrates a high-performance 16-bit CPU with DSP functions, a 16-bit hardware multiply/accumulate (MAC) unit with a 40-bit accumulator, and enhanced boolean bit-manipulation instructions that achieve up to 32 MIPS at the maximum 40 MHz CPU clock with a 50 ns instruction cycle time. The device also supports single-cycle context switching for fast interrupt response. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single die. The ST10 family belongs to the CISC/RISC hybrid 16-bit MCU segment, sitting hierarchically above 8-bit MCUs (8051) and below 32-bit ARM Cortex-M MCUs in embedded processing taxonomy. ST10F276Z5T3 includes a CAN on-chip programmable CAN 2.0B interface, making it part of the broader embedded microcontrollers -> microcontrollers -> embedded processors and controllers -> integrated circuits hierarchy of electronic components. Its CISC/RISC architecture balances deterministic interrupt latency with DSP-class arithmetic throughput. Key differentiating features include the hardware MAC unit enabling single-cycle 16-bit multiplication, the 832 KByte Flash for application storage, and an integrated CAN 2.0B controller. The 144-pin LQFP package provides generous I/O count suitable for automotive body, chassis, and industrial control applications. The device supports single 5 V supply operation, with on-chip voltage regulation supporting both 5 V and 3.3 V I/O. Programming is supported via the bootstrap loader and standard JTAG/OCDS debug. Typical applications include automotive body controllers, industrial automation PLCs, motor control, HVAC systems, and CAN-connected sensor hubs where deterministic real-time response is required. The MAC unit accelerates field-oriented control (FOC) loops in motor drives, while the large Flash/RAM ratio supports protocol stacks such as J1939 or CANopen at the application layer. When designing with the ST10F276Z5T3, ensure proper decoupling on the 5 V rail with bulk plus 100 nF ceramic capacitors adjacent to each supply pair, and follow STMicroelectronics AN2409 PCB layout guidelines for EMC compliance on automotive platforms. Note that ST officially marks the device as NRND - prefer the ST10F276Z5T6 or STM32F3 series for new designs. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
ST10R167-Q3 - 16-Bit 25MHz ROMless MCU | STMicroelectronics
ST10R167-Q3

ST10R167-Q3 - 16-Bit 25MHz ROMless MCU | STMicroelectronics

The STMicroelectronics ST10R167-Q3 is a 16-bit ROMless CMOS microcontroller from the ST10 family, running at up to 25 MHz with an 80 ns instruction cycle time and 12.5 MIPS throughput, housed in a 144-pin PQFP (28x28 mm) surface-mount package. It integrates 4 KB of on-chip high-speed RAM, one CAN 2.0B interface, 16 channels of 10-bit A/D conversion, and 111 general-purpose I/O lines, with program code fetched from external memory. A ROMless microcontroller is a member of the microcontroller (MCU) hierarchy that contains no internal non-volatile program memory; it executes code stored in external EPROM, flash, or EEPROM devices. Within the power-management-of-compute hierarchy, the ST10R167-Q3 sits in the 16-bit embedded microcontroller class, positioned above simple 8-bit MCUs and below 32-bit parts, making it a classic choice for real-time embedded control systems that need external, field-updatable firmware. Key differentiating features include the 4-stage pipelined 16-bit CPU delivering 12.5 MIPS, enhanced boolean bit-manipulation facilities, additional instructions supporting high-level languages and operating systems, on-chip PLL clock generation from a low-frequency crystal, a high-speed synchronous serial channel (SSC), and the CAN 2.0B module for robust vehicle and industrial networking. According to the STMicroelectronics datasheet, the device operates from a 4.5V to 5.5V supply over a -40C to +125C temperature range (the Q3 suffix grade). Architecturally, the ST10R167 derives from the proven ST10 (SAB 80C166-derived) family, combining a fast Harvard-style memory structure with a rich peripheral event controller that handles interrupt-driven I/O with minimal CPU overhead. The external bus interface supports multiplexed or demultiplexed modes, letting designers size code memory to the application. Typical applications include automotive engine management and body electronics, industrial motor control and automation, communication equipment, and instrumentation systems where 16-bit real-time performance plus CAN connectivity are required. A key design consideration is that the ROMless architecture mandates external program memory: budget bus timing, wait states, and PCB routing for the external bus, and verify that the 4 KB on-chip RAM is sufficient for data and stack in your real-time workload. This page adds engineering value beyond the manufacturer datasheet by compiling drop-in family alternatives, pricing context, design notes, and application guidance in one structured, machine-readable resource.

RFQ İletişim
ST21NFCJ - NFC Controller IC, 13.56MHz, ISO 14443/15693/18092
ST21NFCJ

ST21NFCJ - NFC Controller IC, 13.56MHz, ISO 14443/15693/18092

The STMicroelectronics ST21NFCJ is a single near-field communication (NFC) controller IC designed for integration in mobile devices and NFC-compliant products, supporting the three standard NFC operating modes—Card Emulation, Reader/Writer, and Peer-to-Peer communication—at a carrier frequency of 13.56 MHz. It comes in a compact WFBGA-75 wafer-level package and operates from a supply voltage of 2.4 V to 5 V, providing designers with the flexibility to power it from a single-cell Li-ion battery or a regulated 3.3 V / 5 V rail. NFC controllers are mixed-signal ICs that combine a 13.56 MHz RF front end, a digital protocol stack, and a host interface to bring contactless functionality to consumer and industrial electronics. The ST21NFCJ belongs to the broader family of secure microcontrollers and contactless interface ICs, sitting alongside secure-element devices such as the ST33 family, and supporting the same ISO 14443 Type A/B, ISO 15693, ISO 18092 (NFCIP-1), and NFC Forum tag-type (MIFARE) standards. Key features include support for all three NFC modes (CE, R/W, P2P), compliance with ISO/IEC 14443 Type A and B, ISO/IEC 15693, ISO/IEC 18092, and NFC Forum tag types, plus a high-efficiency RF front-end. The device exposes both I2C and SPI host interfaces, allowing it to be paired with application processors from ST (STM32), Qualcomm, MediaTek, and other mobile-platform MPUs without glue logic. Internal firmware handles collision resolution, modulation depth control, and automatic gain control on the reader side. Architecturally, the IC combines an ARM Cortex-M-class microcontroller core (running the ST NFC firmware stack), a dedicated analog RF block, and a crypto-accelerator for MIFARE Classic and ISO 14443-4 secure sessions. The internal voltage regulator allows direct connection to a 5 V supply, simplifying power-tree design in point-of-sale terminals and embedded card readers. Typical applications include contactless payment terminals, transit ticketing hardware, mobile-phone NFC peripherals, secure access readers, and point-of-sale accessories. The wide 2.4 V-5 V supply window supports battery-powered wearables as well as USB-powered retail terminals. Designers should route the antenna matching network as close to the package bumps as possible, and verify RF performance with the evaluation board and NFC Forum analyzer tools to ensure compliance. The host I2C/SPI lines must be pulled up to the host MCU VCC, not to the ST21NFCJ supply, when the two rails differ. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shortlist alternatives and quickly understand where the ST21NFCJ fits in the overall NFC IC landscape.

RFQ İletişim
ST54M - NFC + Secure Element + eSIM + PQC Chip | STMicroelectronics
ST54M

ST54M - NFC + Secure Element + eSIM + PQC Chip | STMicroelectronics

The STMicroelectronics ST54M is a single-die secure solution integrating a contactless front-end (ST54M_CLF), a secure element (ST54M_SE), an embedded SIM (eSIM), and a post-quantum cryptography (PQC) hardware accelerator supporting ML-KEM and ML-DSA algorithms. It is designed for integration into mobile devices and NFC-compliant products, with contactless operating distance extending beyond 15 cm from any reader. A secure element is a hardened, tamper-resistant integrated circuit that stores cryptographic keys and executes security-critical operations in isolation from the main application processor. Within the power-management and connectivity hierarchy of a smartphone, the ST54M sits in the trusted execution domain, handling payment credentials, digital identity, transit tickets, and digital keys. The eSIM function follows the embedded SIM paradigm defined by GSMA specifications, and the serial interface of ST54M_SE is fully compatible with the ISO/IEC 7816-3 standard (T=0, T=1) up to 20 MHz. Key differentiating features include the world-first integration of a PQC hardware accelerator in a mobile secure chip (announced by STMicroelectronics on June 24, 2026), crypto agility that supports hybrid cryptographic approaches during the transition to full post-quantum deployment, and single-die NFC plus secure element integration that simplifies board design versus two-chip solutions. Architecturally, the ST54M combines the CLF (contactless front-end) handling ISO 14443-type RF communication and NFC Forum interactions with the SE platform running Java Card-class secure workloads. The PQC accelerator offloads lattice-based key encapsulation (ML-KEM) and digital signatures (ML-DSA) from the CPU, future-proofing devices against harvest-now-decrypt-later attacks. Typical applications are mobile payment wallets (NFC payments), embedded SIM provisioning for connected services, transit fare collection, digital car keys, and secure identity documents. Design consideration: because contactless performance depends strongly on antenna matching, follow the ST reference antenna tuning network and verify the >15 cm operating distance in the final mechanical stack-up. This page synthesizes manufacturer product data, PQC campaign details, and cross-reference search results into a single engineering reference not found on distributor listing pages.

RFQ İletişim
ST7262 - USB 8-bit MCU with 3 Endpoints, ROM/Flash | STMicroelectronics
ST7262

ST7262 - USB 8-bit MCU with 3 Endpoints, ROM/Flash | STMicroelectronics

The STMicroelectronics ST7262 is a low-speed USB 8-bit microcontroller from the ST7 family, integrating up to 16 Kbytes of program memory (ROM, FASTROM, or dual-voltage Flash), 256 bytes of RAM, and a USB 1.1 full-speed/low-speed device controller with three endpoints. It features an industry-standard 8-bit ST7 core with enhanced instruction set, a 10-bit ADC, two 16-bit timers, an SCI, an SPI, a watchdog, and an LVD. An 8-bit MCU (microcontroller unit) is a single-chip computer integrating CPU, memory, and peripherals; the ST7 family specifically targets cost-sensitive embedded applications with deterministic interrupt handling and a C-friendly instruction set. Within the MCU taxonomy, the ST7262 sits under: MCU -> 8-bit MCU -> ST7 family -> USB-capable microcontrollers. The integrated USB transceiver and 3-endpoint controller eliminate the need for an external PHY, reducing BOM cost and PCB area for HID, CDC, and vendor-class USB peripherals. Key features include In-Application Programming (IAP) and In-Circuit Programming (ICP) for field firmware upgrades, read/write protection for code security, a master/slave SPI supporting up to 8 Mbit/s, an SCI for asynchronous serial communication, and an operating voltage range of 4.0V to 5.5V suited to USB bus-powered designs. The 10-bit ADC offers 8 multiplexed channels with a minimum conversion time of 12 microseconds, sufficient for basic sensor and battery-monitoring tasks. The architecture pairs a Harvard-style bus with a 4-level priority interrupt controller and a 16-bit timer structure delivering PWM, input capture, and output compare functions. The dual-voltage Flash option allows in-system programming from a 5V USB rail without an external charge pump, and read/write protection prevents software theft via the debug interface. Typical applications include USB keyboards and mice, USB game controllers, USB barcode scanners, low-speed USB-to-serial bridges, and industrial USB human-interface devices. The small footprint and integrated USB make it a popular choice for HID-class peripherals where bill-of-materials cost is critical. When designing with the ST7262, ensure proper USB DP/DM trace impedance (90 ohms differential) and place the internal pull-up resistor on D+ (for full-speed) or D- (for low-speed only) according to the desired USB speed. Decouple VDD with a 100 nF X7R4D ceramic capacitor placed within 3 mm of the supply pin. This page synthesizes distributor availability, parametric equivalents, and practical design notes not found in the standalone manufacturer datasheet, helping procurement and engineering teams evaluate second-source options quickly.

RFQ İletişim
ST72F324BJ6TAS - 8-bit ST7 MCU, 32KB Flash, 44-LQFP | STMicroelectronics
ST72F324BJ6TAS

ST72F324BJ6TAS - 8-bit ST7 MCU, 32KB Flash, 44-LQFP | STMicroelectronics

The STMicroelectronics ST72F324BJ6TAS is an 8-bit ST7-family CISC microcontroller with 32 KB of in-application programmable Flash, 1 KB of RAM, and a 10-bit ADC, housed in a 44-pin LQFP (10x10 mm) package qualified for automotive temperature grades. The device runs from a 3.8 V to 5.5 V supply at up to 8 MHz internal CPU clock and integrates four timers plus SPI and SCI peripherals for motor, appliance, and body-electronics connectivity. An 8-bit MCU is a microcontroller whose internal data bus, registers and ALU are 8 bits wide, trading raw throughput for deterministic interrupt latency, simple CISC instruction set, and very low cost per I/O. The ST7 family sits within the broader hierarchy microcontroller -> embedded processor -> semiconductor IC; modern 8-bit MCUs remain popular where deterministic timing, EMI robustness and BOM cost dominate over raw MIPS, especially in automotive body, white-goods, and industrial sensor-interface modules. Key features include 32 KB of dual-voltage High-Density Flash with read-out protection, In-Application Programming and In-Circuit Programming support, 1 KB of RAM, a 10-bit ADC with up to 16 channels, four 8-bit timers with PWM, plus SPI and SCI communication blocks. The on-chip oscillator and watchdog reduce external component count. The ST72F324BJ6TAS uses the ST7 CISC core with a 16-bit program counter and Harvard-style bus structure. Memory is split between 32 KB HDFlash and 1 KB SRAM, with separate EEPROM-style emulation in Flash. The 10-bit ADC supports up to 16 multiplexed channels for automotive sensor reading. Typical applications include automotive body controllers, HVAC panels, instrument clusters, white-goods user interfaces, and low-cost industrial sensor nodes. Its wide 5 V supply tolerance and AEC-Q100-style automotive grade make it well suited to 12 V board-net environments. When designing with this device, note the 3.8 V minimum supply and derate CPU clock when VDD is below 4.5 V for full Flash read margin. Place the decoupling capacitor within 5 mm of VDD/VDDA pins and use short traces to ADC inputs to limit acquisition-time error. This page consolidates distributor stock, drop-in compatible variants, and design notes beyond the manufacturer datasheet, making sourcing and second-source qualification faster than cross-checking distributor listings manually.

RFQ İletişim
STM32C071C8T6 - 32-bit ARM Cortex-M0+ MCU, 64KB Flash | STMicroelectronics
STM32C071C8T6

STM32C071C8T6 - 32-bit ARM Cortex-M0+ MCU, 64KB Flash | STMicroelectronics

The STMicroelectronics STM32C071C8T6 is a 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 48 MHz. It features 64 KB of Flash memory and 16 KB of SRAM, packaged in a 48-pin LQFP (7x7 mm) with a 0.5 mm pitch. This device is part of the STM32C0 series, designed for cost-sensitive and power-efficient applications. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip. The STM32C071C8T6 belongs to the STM32 family, which is a broad portfolio of 32-bit MCUs based on ARM Cortex-M cores. Within the STM32C0 series, it targets entry-level applications that require a balance of performance, low power, and affordability. The Cortex-M0+ core is an energy-efficient processor optimized for simple control tasks, making it suitable for IoT devices, consumer electronics, and industrial control. Key features include a 12-bit ADC with up to 16 channels, multiple timers (including a 16-bit advanced-control timer), and a rich set of communication interfaces: I2C, SPI, USART, and a low-power UART. The device supports a wide supply voltage range of 2.0V to 3.6V, with an operating temperature range of -40°C to +85°C. It also includes a real-time clock (RTC), a CRC calculation unit, and a unique device ID for traceability. The STM32C071C8T6 is built on a 90nm process technology, offering low dynamic power consumption. It features multiple low-power modes (Sleep, Stop, Standby) to optimize energy usage in battery-powered designs. The device includes a nested vectored interrupt controller (NVIC) for efficient interrupt handling, and a memory protection unit (MPU) for enhanced security. The LQFP-48 package provides a compact footprint while offering sufficient I/O pins for peripheral connectivity. Typical applications include home automation sensors, smart appliances, portable medical devices, and industrial monitoring systems. Its low power consumption and rich peripheral set make it ideal for battery-operated IoT nodes that require periodic sensor readings and wireless communication. The device also supports firmware updates via a built-in bootloader, simplifying field maintenance. When designing with this MCU, ensure proper decoupling of the VDD pins with 100nF capacitors placed close to the device. The VDDA pin should be connected to a clean analog supply to minimize ADC noise. For low-power operation, configure unused GPIOs as analog inputs to reduce leakage current.

RFQ İletişim
STM32C091RCT6 - 256KB Flash ARM Cortex-M0+ MCU | STMicroelectronics
STM32C091RCT6

STM32C091RCT6 - 256KB Flash ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32C091RCT6 is a 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 48 MHz. It features 256 KB of Flash memory and 32 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 64-pin LQFP package (LQFP64) with a 10x10 mm body and 0.5 mm pitch, providing a compact footprint for space-constrained designs. What is an ARM Cortex-M0+ microcontroller? The ARM Cortex-M0+ is the smallest, lowest-power ARM processor designed for embedded systems. It is a 32-bit RISC architecture that offers a balance between performance and energy efficiency, making it ideal for battery-powered and cost-sensitive applications. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, serving as the 'brain' of embedded systems. The Cortex-M0+ is part of the ARM Cortex-M family, which includes M0, M0+, M3, M4, and M7 cores, each offering different performance and feature levels. Key features of the STM32C091RCT6 include a 12-bit ADC with up to 16 channels, multiple timers (including advanced-control timers), and a comprehensive set of communication interfaces such as I2C, SPI, USART, and CAN. The device operates from a 2.0V to 3.6V power supply and supports an extended temperature range of -40°C to +85°C. It also includes a real-time clock (RTC), DMA controller, and various low-power modes (Sleep, Stop, and Standby) to optimize energy consumption. The STM32C091RCT6 is built on ST's advanced 90nm process technology, offering a good balance of performance and power efficiency. The Cortex-M0+ core includes a nested vectored interrupt controller (NVIC) for efficient interrupt handling, and the device supports both JTAG and SWD debugging interfaces. The memory architecture includes a single bank of Flash with read-while-write support, enabling firmware updates without halting the system. Typical applications include industrial control systems, consumer electronics, IoT devices, smart home automation, and motor control. The rich peripheral set and low power consumption make it a versatile choice for many embedded projects. For example, in an IoT sensor node, the STM32C091RCT6 can manage sensor data acquisition, process it locally, and communicate via UART or SPI to a wireless module. When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor for accurate ADC conversions. Also, consider the crystal oscillator layout for the HSE (high-speed external) clock to minimize noise and ensure stable operation.

RFQ İletişim
STM32C531CBU6 - 144MHz Cortex-M33 MCU, 128KB Flash | ST
STM32C531CBU6

STM32C531CBU6 - 144MHz Cortex-M33 MCU, 128KB Flash | ST

The STMicroelectronics STM32C531CBU6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core running at up to 144 MHz, with 128 KB of flash memory, 64 KB of SRAM, and an I3C interface, housed in a 48-pin UFQFPN (7x7 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest layer of the embedded processing hierarchy: Cortex-M33 core -> MCU -> embedded system. Mainstream MCUs like the STM32C5 series target cost-sensitive general-purpose designs that still require high performance, low power consumption, and modern security features. Key features of the STM32C531CBU6 include the single-precision FPU inside the Cortex-M33 core, which supports all Arm single-precision data-processing instructions and data types, enabling efficient floating-point math for sensor fusion and control loops. The 144 MHz core clock delivers high computation throughput, while the 128 KB flash and 64 KB RAM provide headroom for protocol stacks and application code. The integrated I3C interface provides a forward-looking, two-wire sensor bus that is backward-compatible with I2C. According to the STMicroelectronics datasheet, the STM32C53xxx family is fabricated on ST's 40 nm process technology, balancing performance, power, and cost. The device targets cost-sensitive applications that require a balance between high performance, low power consumption, and high security. Typical applications include industrial sensors, consumer appliances, motor control, IoT endpoints, and building automation nodes, where the 144 MHz Cortex-M33 and I3C support fast sensor aggregation. Design consideration: verify pin mapping against the official STM32C531CB datasheet before layout, and use ST's STM32CubeMX tool for pinout and clock configuration. This page adds distributor sourcing data, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
STM32C531FBU6 - Cortex-M33 144MHz MCU | STMicroelectronics
STM32C531FBU6

STM32C531FBU6 - Cortex-M33 144MHz MCU | STMicroelectronics

The STMicroelectronics STM32C531FBU6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 RISC core with single-precision FPU, operating at up to 144 MHz, with I3C support, housed in a 48-pin UFQFPN (7x7 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (flash and SRAM), and a rich set of peripherals on one die, sitting at the lowest level of the embedded-system hierarchy: semiconductor -> microcontroller -> embedded system. The STM32C5 series belongs to STMicroelectronics' mainstream STM32 family of Arm Cortex-M based 32-bit MCUs, positioned for cost-sensitive general-purpose designs. Key features include the high-performance Cortex-M33 core executing from flash at 144 MHz, a single-precision floating-point unit (FPU) supporting all Arm single-precision data-processing instructions and data types, and the I3C interface - a backward-compatible successor to I2C that enables higher throughput and dynamic addressing. General-purpose 32-bit MCUs of this class are used in motor control, consumer appliances, IoT nodes, and industrial automation. Technically, the STM32C53xxx family shares the same platform architecture, memory map, and peripheral set, which means code written for one flash density variant runs unmodified on another - a significant advantage for product families spanning multiple memory options. The FPU offloads floating-point math from software emulation, freeing CPU cycles for control loops and signal processing. Typical applications include industrial sensors and actuators, home appliances, building automation, and USB/I3C-connected peripherals where 144 MHz headroom and hardware floating-point improve response time and precision. Design consideration: verify the exact flash and RAM density of the F-grade variant against the ST datasheet before finalizing the linker script, and confirm UFQFPN-48 footprint thermal-pad soldering for ground integrity. This page synthesizes verified distributor data, drop-in family alternatives, and practical design guidance not found in a single manufacturer document.

RFQ İletişim
STM32C542RCT6 - Cortex-M33 144MHz 256KB MCU | STMicroelectronics
STM32C542RCT6

STM32C542RCT6 - Cortex-M33 144MHz 256KB MCU | STMicroelectronics

The STMicroelectronics STM32C542RCT6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core with FPU, running at up to 144 MHz and housed in a 64-pin LQFP (10x10 mm) package. It integrates 256 KB of flash memory with ECC (2 banks, read-while-write), 64 KB of SRAM (including 32 KB with ECC), and 64 KB of user data flash memory in 2 banks. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, memory, and peripherals on one die. Within the semiconductor hierarchy, the STM32C542RCT6 sits under 32-bit microcontrollers -> embedded processors -> semiconductors, and belongs to the STM32C5 mainstream general-purpose family from STMicroelectronics. Key features include the Arm Cortex-M33 32-bit RISC core with single-precision FPU, Memory Protection Unit (MPU), and DSP instructions; I3C and dual FDCAN interfaces for modern sensor and automotive-adjacent networking; and hardware cryptographic acceleration for secure embedded designs. The ECC-protected flash and SRAM improve reliability in applications where bit errors cannot be tolerated. Architecturally, the Cortex-M33 implements the Armv8-M mainline profile, combining deterministic real-time behavior with TrustZone-class security features supported by the on-chip crypto block. The 144 MHz operating frequency and single-cycle FPU make it suitable for control-loop and signal-processing workloads that exceed classic Cortex-M4 mainstream parts. Typical applications include industrial control and automation nodes, CAN/FDCAN networking gateways, IoT sensor hubs using I3C, consumer appliances, and secure connected devices. Design consideration: the LQFP-64 10x10 mm footprint requires a standard surface-mount reflow process; plan decoupling capacitors on each VDD pin pair and follow the ST layout guidelines in the datasheet for VDDA/VSSA isolation to preserve ADC accuracy. This page synthesizes distributor pricing tiers, drop-in same-family alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim