Mikrodenetleyiciler

Ürünler (20.000+)

STM32C562RET6 - 144MHz Cortex-M33 MCU, 512KB Flash | ST
STM32C562RET6

STM32C562RET6 - 144MHz Cortex-M33 MCU, 512KB Flash | ST

The STMicroelectronics STM32C562RET6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core running at up to 144 MHz, with 512 KB of flash memory and 128 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, forming the complete brain of an embedded system. Within the semiconductor hierarchy, the STM32C562RET6 belongs to the STMicroelectronics STM32C5 Series of general-purpose microcontrollers, which sits in the broader family of Arm Cortex-M based MCUs and the wider class of system-on-chip (SoC) devices used in industrial, consumer, and automotive-adjacent electronics. Key features of the STM32C562RET6 include the high-performance Cortex-M33 RISC core with a single-precision floating-point unit (FPU) supporting all Arm single-precision data-processing instructions and data types, 512 KB of on-chip flash for program storage, 128 KB of SRAM for data and stacks, and a peripheral set that includes I3C, FDCAN, and hardware cryptographic acceleration. The FPU eliminates software floating-point emulation, while the crypto hardware offloads encryption tasks from the CPU. From a technical standpoint, the Cortex-M33 core implements the Armv8-M architecture, which brings hardware-enforced security foundations and a higher instruction efficiency than earlier Cortex-M3/M4 generations. At 144 MHz, the core delivers substantial real-time processing headroom for control loops, communication stacks, and signal processing. The FDCAN controller supports modern CAN-FD vehicle and industrial networks with larger payloads, and I3C provides a backward-compatible, faster successor to I2C for sensor connectivity. Typical applications include industrial automation and motor control nodes leveraging FDCAN, IoT sensor hubs using I3C for multi-sensor buses, and secure connected devices where the integrated crypto accelerator protects firmware and communications. The 64-pin LQFP with 0.5 mm pitch suits hand-solderable prototypes and automated assembly alike. When designing with this MCU, budget the 512 KB flash and 128 KB RAM carefully: the Armv8-M secure/non-secure partitioning and crypto key storage consume memory, and FDCAN applications should size message RAM according to worst-case bus load. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with all core parameters verified against ST official sources as of 2026-10-18.

RFQ İletişim
STM32C591RET6 - Cortex-M33 144MHz 512KB MCU | STMicroelectronics
STM32C591RET6

STM32C591RET6 - Cortex-M33 144MHz 512KB MCU | STMicroelectronics

The STMicroelectronics STM32C591RET6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core with single-precision FPU, running at up to 144 MHz, with 512 KB of Flash memory and 256 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) package. It belongs to the STM32C5 series and adds the I3C interface for next-generation sensor connectivity. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, UARTs, SPI, I2C, and ADCs on one die. Within the semiconductor hierarchy, the STM32C591RET6 sits in the general-purpose MCU family -> ARM Cortex-M based microcontroller -> STM32 product line -> STMicroelectronics portfolio. MCUs like this one run deterministic real-time firmware for embedded control, sensing, and connectivity tasks that neither application processors nor simple 8-bit controllers handle as efficiently. Key features of the STM32C591RET6 include the high-performance Cortex-M33F core at 144 MHz with a single-precision floating-point unit supporting all Arm single-precision data-processing instructions and data types, a large 512 KB on-chip Flash for code storage, and 256 KB of SRAM for buffers and stacks. The integrated I3C interface provides backward-compatible I2C operation plus higher-throughput, lower-pin-count sensor communication, which is a differentiator versus older STM32 mainstream families. Architecturally, the STM32C59xxx devices are general-purpose members of the STM32C5 series, designed by STMicroelectronics as an upgrade path for mainstream designs. The Armv8-M based Cortex-M33 core brings improved instruction efficiency and security foundations compared with Cortex-M4, making the part suitable for modern connected products that need headroom for protocol stacks and signal processing. Typical applications include industrial automation nodes, consumer appliances, motor control and power-management boards, IoT sensor gateways using I3C, and embedded systems migrating from STM32F4/L4 mainstream parts that need more RAM and a security-oriented core. A key design consideration is verifying the LQFP-64 (10x10 mm) footprint and I3C bus pull-up requirements early in layout, since the 64-pin variant limits available GPIO and peripheral multiplexing versus 100-pin family members. This page synthesizes verified distributor data, pricing tiers, drop-in alternatives, and practical design notes beyond what a single datasheet page provides.

RFQ İletişim
STM32C593ZGT6 - 144MHz Cortex-M33 MCU 1MB Flash | ST
STM32C593ZGT6

STM32C593ZGT6 - 144MHz Cortex-M33 MCU 1MB Flash | ST

The STMicroelectronics STM32C593ZGT6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core running at 144 MHz, integrating 1 MB of flash memory, 256 KB of SRAM, and a rich peripheral set including I3C, Ethernet, and dual FDCAN, all packaged in a 144-pin LQFP (20 x 20 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of the embedded systems hierarchy: MCU -> embedded processor -> semiconductor device. The STM32C5 series belongs to STMicroelectronics' STM32 mainstream family, positioned for cost-sensitive general-purpose applications that still require modern connectivity and security features inherited from the higher-performance STM32 lines. Key features include the Arm Cortex-M33 32-bit RISC core with a single-precision floating-point unit (FPU) supporting all Arm single-precision data-processing instructions, up to 144 MHz operation, 1 MB (1M x 8) of on-chip flash for code and data storage, and 256 KB of SRAM for buffers and stacks. The peripheral complement - I3C for next-generation sensor interfaces, an Ethernet MAC for networked designs, and dual FDCAN controllers for automotive and industrial fieldbus - differentiates this part from lower-tier mainstream MCUs. According to the STM32C59xxx datasheet, the devices are general-purpose microcontrollers based on the high-performance Arm Cortex-M33 32-bit RISC core, with the FPU executing hardware-accelerated floating-point math for control algorithms, digital filtering, and sensor fusion. The Cortex-M33 architecture also brings Armv8-M security foundations, enabling TrustZone-class isolation features that legacy Cortex-M4 parts lack. Typical applications include industrial automation nodes using dual FDCAN fieldbus, networked IoT gateways leveraging the Ethernet MAC, and motor control or power-conversion systems exploiting the FPU at 144 MHz. The I3C interface supports modern sensor rings with lower pin counts than I2C/SPI combinations. When designing with the STM32C593ZGT6, budget flash and RAM headroom for the Ethernet stack, and verify pin multiplexing on the 144-LQFP footprint early, since the peripheral-rich die maps many functions onto shared pins. Development is supported by STM32Cube ecosystem tools and HAL libraries. This page synthesizes verified distributor listings, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
STM32C5A3ZGT6 - 144MHz Cortex-M33 MCU, 1MB Flash | ST
STM32C5A3ZGT6

STM32C5A3ZGT6 - 144MHz Cortex-M33 MCU, 1MB Flash | ST

The STMicroelectronics STM32C5A3ZGT6 is a general-purpose 32-bit microcontroller based on the Arm Cortex-M33 core with single-precision FPU, running at up to 144 MHz, with 1 MB of ECC-protected flash memory and 256 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest layer of the embedded processing hierarchy (MCU -> embedded processor -> application processor -> system-on-chip). Within the STM32 portfolio, the STM32C5 series sits in ST's mainstream general-purpose MCU family, positioned for cost-sensitive industrial and consumer designs that still require modern security and connectivity features. Key features of the STM32C5A3ZGT6 include a 1 MB flash with ECC and 2-bank read-while-write architecture, 256 KB SRAM of which 128 KB is ECC-protected, and a rich peripheral set highlighted by I3C, Ethernet MAC, and dual FDCAN controllers. An MPU (memory protection unit), DSP instructions, and cryptographic hardware acceleration round out the feature set, enabling functional partitioning and secure firmware upgrade schemes such as secure boot. Technically, the Cortex-M33 is an Armv8-M mainline core: the FPU supports all Arm single-precision data-processing instructions and data types, while the MPU enables privilege separation between application and bootloader code. Dual-bank flash with ECC supports live firmware updates without downtime, and the ECC-protected SRAM half reduces the risk of silent data corruption in electrically noisy industrial environments. Typical applications include industrial automation nodes and PLC I/O modules (dual FDCAN and Ethernet), building control and motor control systems leveraging the 144 MHz headroom, and connected IoT gateways that exploit I3C for modern sensor attachment. The large on-chip memory eliminates external flash in most designs, improving BOM cost and reliability. For design, note that the crypto-capable variant helps meet security requirements, but plan the power supply and clock tree early - Ethernet and FDCAN operation at 144 MHz demand clean decoupling across the 144-pin LQFP footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
STM32F030C6T6 - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics
STM32F030C6T6

STM32F030C6T6 - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics

The STMicroelectronics STM32F030C6T6 is a 32-bit ARM Cortex-M0 value-line microcontroller from the STM32F0 series, integrating a 48 MHz RISC core, 32 KB of embedded Flash, 4 KB of SRAM, and a rich set of peripherals in a 48-pin LQFP package (7x7 mm). It operates across a 2.4V to 3.6V supply range and is specified from -40C to +85C for industrial-grade use. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and programmable input/output peripherals on a single die. In the system hierarchy, an MCU is an embedded processor, which falls under the broader category of integrated circuits and semiconductors. The STM32F030C6T6 sits in the mainstream 32-bit segment, positioned above legacy 8-bit MCUs and below high-performance application processors, offering an economical entry point into the ARM Cortex-M ecosystem with deterministic real-time behavior. Key features of the STM32F030C6T6 include a 12-bit SAR ADC with up to 10 external channels, two 16-bit general-purpose timers plus one 16-bit advanced-control timer for PWM, a 32-bit real-time timer, and a 5-channel DMA controller. Communication interfaces comprise I2C, SPI, and USART, and the device exposes up to 39 GPIO pins. The integrated 4 MHz to 32 MHz external crystal oscillator and internal 8 MHz RC with PLL enable flexible clocking. Low-power Sleep, Stop, and Standby modes are supported for battery-powered designs. From a technical perspective, the Cortex-M0 core implements the ARMv6-M architecture with a 3-stage pipeline, delivering 0.9 DMIPS/MHz and supporting Thumb/Thumb-2 instruction subsets. The 32 KB Flash supports read-while-write, enabling in-field firmware upgrades without halting execution. A 96-bit unique device ID and a cyclic redundancy check (CRC) hardware unit assist in traceability and data integrity. The NVIC provides deterministic interrupt handling with configurable priority levels. Typical applications include industrial sensor interfaces, home automation nodes, consumer white goods, low-cost motor control, LED lighting drivers, and USB-to-UART bridges. The combination of timers, ADC, and DMA enables efficient closed-loop control, while the small LQFP-48 footprint supports compact PCB layouts. When designing with this device, decouple each VDD pin with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, and add a 4.7 uF bulk capacitor on the main rail. Configure the BOOT0 pin to select Flash, System memory (USART bootloader), or SRAM boot. The SWD interface requires only two pins (SWDIO/SWCLK) plus GND, simplifying in-circuit programming and debug. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F030C6T6.

USD $1,15 İletişim
STM32F030C6T6TR - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics (Tape & Reel)
STM32F030C6T6TR

STM32F030C6T6TR - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030C6T6TR is a 32-bit ARM Cortex-M0 value-line microcontroller from the STM32F0 series, integrating a 48 MHz RISC core, 32 KB of embedded Flash, 4 KB of SRAM, and a rich set of peripherals in a 48-pin LQFP package (7x7 mm). It operates across a 2.4V to 3.6V supply range and is specified from -40C to +85C for industrial-grade use. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and programmable input/output peripherals on a single die. In the system hierarchy, an MCU is an embedded processor, which falls under the broader category of integrated circuits and semiconductors. The STM32F030C6T6TR sits in the mainstream 32-bit segment, positioned above legacy 8-bit MCUs and below high-performance application processors, offering an economical entry point into the ARM Cortex-M ecosystem with deterministic real-time behavior. Key features of the STM32F030C6T6TR include a 12-bit SAR ADC with up to 10 external channels, two 16-bit general-purpose timers plus one 16-bit advanced-control timer for PWM, a 32-bit real-time timer, and a 5-channel DMA controller. Communication interfaces comprise I2C, SPI, and USART, and the device exposes up to 39 GPIO pins. The integrated 4 MHz to 32 MHz external crystal oscillator and internal 8 MHz RC with PLL enable flexible clocking. Low-power Sleep, Stop, and Standby modes are supported for battery-powered designs. From a technical perspective, the Cortex-M0 core implements the ARMv6-M architecture with a 3-stage pipeline, delivering 0.9 DMIPS/MHz and supporting Thumb/Thumb-2 instruction subsets. The 32 KB Flash supports read-while-write, enabling in-field firmware upgrades without halting execution. A 96-bit unique device ID and a cyclic redundancy check (CRC) hardware unit assist in traceability and data integrity. The NVIC provides deterministic interrupt handling with configurable priority levels. Typical applications include industrial sensor interfaces, home automation nodes, consumer white goods, low-cost motor control, LED lighting drivers, and USB-to-UART bridges. The combination of timers, ADC, and DMA enables efficient closed-loop control, while the small LQFP-48 footprint supports compact PCB layouts. When designing with this device, decouple each VDD pin with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, and add a 4.7 uF bulk capacitor on the main rail. Configure the BOOT0 pin to select Flash, System memory (USART bootloader), or SRAM boot. The SWD interface requires only two pins (SWDIO/SWCLK) plus GND, simplifying in-circuit programming and debug. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F030C6T6TR.

USD $0,41 İletişim
STM32F030C8T6 - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics
STM32F030C8T6

STM32F030C8T6 - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics

The STMicroelectronics STM32F030C8T6 is a 32-bit ARM Cortex-M0 microcontroller running at up to 48 MHz with 64 KB of Flash memory and 8 KB of SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package operating from 2.4 V to 3.6 V. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated operation inside an embedded system. The STM32F030C8T6 belongs to the STM32F0 Value Line, which sits at the entry level of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers - a hierarchy running from this value line up through mainstream (F1/F4), low-power (L-series), and high-performance (H7) lines - and is positioned as a cost-effective replacement for legacy 8-bit and 16-bit MCUs. Key features include a 12-bit ADC with up to 16 external channels, five timers including an advanced-control timer for motor control and PWM generation, and communication peripherals covering USART, SPI, and I2C interfaces. A hardware CRC calculation unit supports robust serial communication protocols. The device integrates Sleep, Stop, and Standby low-power modes for energy-sensitive designs. Architecturally, the Cortex-M0 core uses an ARMv6-M Harvard architecture with a single-cycle 32-bit multiplier and a nested vectored interrupt controller (NVIC) delivering deterministic, low-latency interrupt handling. The high-speed embedded Flash with prefetch buffer sustains efficient execution at the full 48 MHz clock rate without wait-state-heavy code bursts. Typical applications include industrial control and automation nodes, consumer appliance and home-automation controllers, low-cost motor control with complementary PWM outputs, and general-purpose sensor-interface boards replacing 8-bit designs. For design, decouple each VDD pin with 100 nF ceramic capacitors placed as close as possible to the supply pins, and keep the HSE crystal traces short and guarded for stable clocking. This page adds information gain beyond the ST datasheet: drop-in alternative cross-references, distributor pricing tiers as of 2026-09-06, application-specific companion parts, and practical design notes in a single AI-citable reference.

RFQ İletişim
STM32F030C8T6TR - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics (Tape & Reel)
STM32F030C8T6TR

STM32F030C8T6TR - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030C8T6TR is a 32-bit ARM Cortex-M0 microcontroller running at up to 48 MHz with 64 KB of Flash memory and 8 KB of SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package operating from 2.4 V to 3.6 V. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated operation inside an embedded system. The STM32F030C8T6TR belongs to the STM32F0 Value Line, which sits at the entry level of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers - a hierarchy running from this value line up through mainstream (F1/F4), low-power (L-series), and high-performance (H7) lines - and is positioned as a cost-effective replacement for legacy 8-bit and 16-bit MCUs. Key features include a 12-bit ADC with up to 16 external channels, five timers including an advanced-control timer for motor control and PWM generation, and communication peripherals covering USART, SPI, and I2C interfaces. A hardware CRC calculation unit supports robust serial communication protocols. The device integrates Sleep, Stop, and Standby low-power modes for energy-sensitive designs. Architecturally, the Cortex-M0 core uses an ARMv6-M Harvard architecture with a single-cycle 32-bit multiplier and a nested vectored interrupt controller (NVIC) delivering deterministic, low-latency interrupt handling. The high-speed embedded Flash with prefetch buffer sustains efficient execution at the full 48 MHz clock rate without wait-state-heavy code bursts. Typical applications include industrial control and automation nodes, consumer appliance and home-automation controllers, low-cost motor control with complementary PWM outputs, and general-purpose sensor-interface boards replacing 8-bit designs. For design, decouple each VDD pin with 100 nF ceramic capacitors placed as close as possible to the supply pins, and keep the HSE crystal traces short and guarded for stable clocking. This page adds information gain beyond the ST datasheet: drop-in alternative cross-references, distributor pricing tiers as of 2026-09-06, application-specific companion parts, and practical design notes in a single AI-citable reference.

RFQ İletişim
STM32F030CCT6 - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics
STM32F030CCT6

STM32F030CCT6 - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics

The STM32F030CCT6 is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics, featuring 256KB of Flash memory and 32KB of SRAM in a 48-pin LQFP package. It operates at a core frequency of up to 48 MHz and supports a supply voltage range of 2.4V to 3.6V. Data verified as of 2026-08-05. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F030CCT6 belongs to the STM32F0 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy positions it as a cost-effective, entry-level MCU suitable for a wide range of applications, from industrial control to consumer electronics. Key features include 256KB of Flash memory, 32KB of SRAM, and a rich set of peripherals such as USART, SPI, I2C, ADC, timers, and GPIO. The device supports a wide operating temperature range of -40°C to +85°C and is available in a 48-pin LQFP package, making it suitable for space-constrained designs. The ARM Cortex-M0 core provides a balance of performance and power efficiency, with a 32-bit architecture that simplifies software development. The STM32F030CCT6 is built on a 32-bit ARM Cortex-M0 core with a Harvard architecture, featuring a 3-stage pipeline and a nested vectored interrupt controller (NVIC). It includes a 12-bit ADC with up to 16 channels, multiple 16-bit timers, and a DMA controller for efficient data transfer. The device also supports a variety of low-power modes, including Sleep, Stop, and Standby, enabling energy-efficient operation in battery-powered applications. Typical applications include industrial control systems, motor control, consumer electronics, and IoT devices. The STM32F030CCT6 is well-suited for these applications due to its low cost, low power consumption, and comprehensive peripheral set. For example, in motor control, the advanced timers and ADC enable precise PWM generation and current sensing, while in IoT devices, the low-power modes extend battery life. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to the VDD pins. Additionally, configure the clock source appropriately, as the internal HSI oscillator provides a 8 MHz clock that can be used for cost-sensitive designs, while an external crystal can be used for higher accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers evaluating the STM32F030CCT6.

USD $1,48 İletişim
STM32F030CCT6TR - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics (Tape & Reel)
STM32F030CCT6TR

STM32F030CCT6TR - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics (Tape & Reel)

The STM32F030CCT6TR is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics, featuring 256KB of Flash memory and 32KB of SRAM in a 48-pin LQFP package. It operates at a core frequency of up to 48 MHz and supports a supply voltage range of 2.4V to 3.6V. Data verified as of 2026-08-05. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F030CCT6TR belongs to the STM32F0 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy positions it as a cost-effective, entry-level MCU suitable for a wide range of applications, from industrial control to consumer electronics. Key features include 256KB of Flash memory, 32KB of SRAM, and a rich set of peripherals such as USART, SPI, I2C, ADC, timers, and GPIO. The device supports a wide operating temperature range of -40°C to +85°C and is available in a 48-pin LQFP package, making it suitable for space-constrained designs. The ARM Cortex-M0 core provides a balance of performance and power efficiency, with a 32-bit architecture that simplifies software development. The STM32F030CCT6TR is built on a 32-bit ARM Cortex-M0 core with a Harvard architecture, featuring a 3-stage pipeline and a nested vectored interrupt controller (NVIC). It includes a 12-bit ADC with up to 16 channels, multiple 16-bit timers, and a DMA controller for efficient data transfer. The device also supports a variety of low-power modes, including Sleep, Stop, and Standby, enabling energy-efficient operation in battery-powered applications. Typical applications include industrial control systems, motor control, consumer electronics, and IoT devices. The STM32F030CCT6TR is well-suited for these applications due to its low cost, low power consumption, and comprehensive peripheral set. For example, in motor control, the advanced timers and ADC enable precise PWM generation and current sensing, while in IoT devices, the low-power modes extend battery life. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to the VDD pins. Additionally, configure the clock source appropriately, as the internal HSI oscillator provides a 8 MHz clock that can be used for cost-sensitive designs, while an external crystal can be used for higher accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers evaluating the STM32F030CCT6TR.

USD $1,48 İletişim
STM32F030F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
STM32F030F4P6

STM32F030F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

The STMicroelectronics STM32F030F4P6 is a value-line 32-bit Arm Cortex-M0 RISC microcontroller operating up to 48 MHz, with 16 KB Flash, 4 KB SRAM, and a 20-pin TSSOP package. Its 2.4 V to 3.6 V operating range and compact pin count suit embedded control, industrial automation, IoT, metering, and motor-control designs requiring low-cost embedded processing. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-control platform. In the hierarchy, the STM32F030F4P6 is an Arm Cortex-M0 microcontroller, an embedded processor, and a member of the STM32F0 family. The STM32F0 series combines a compact general-purpose architecture with timers, communication interfaces, and analog conversion functions for small control systems. The verified data identifies a high-performance 32-bit RISC core operating at 48 MHz, 16 KB Flash organized as 16K x 8, and 4 KB SRAM according to the distributor and datasheet search results. The device also includes 12-bit and 15-bit ADC capability as stated in the LCSC result, while the manufacturer page identifies enhanced peripherals and I/O resources. Power-on reset and power-down reset functionality is identified in the DigiChip result. The STM32F030F4P6 is appropriate for compact embedded systems where cost, simplicity, and low pin count matter more than high-speed connectivity or large memory capacity. Its Arm Cortex-M0 instruction set supports deterministic embedded control, while the 48 MHz clock provides a practical balance between processing capability and power efficiency. The 20-pin TSSOP package enables compact PCB layouts while supporting external peripherals and signal inputs. Typical uses include low-cost sensor nodes, simple industrial controllers, compact motor-control stages, digital meters, and connected IoT devices. Designers must ensure that the selected firmware, clock tree, peripherals, and board-level support devices match the STM32F030x4 device requirements. The exact pin function, electrical limits, peripheral configuration, and package dimensions should be confirmed against the STMicroelectronics datasheet. For a new design, the 48 MHz Cortex-M0 core and 16 KB Flash make the STM32F030F4P6 most suitable for small control loops and auxiliary processing rather than complex graphical or high-bandwidth workloads. The TSSOP-20 package also requires careful PCB escape routing and adequate pin-copper clearance during assembly. This page combines verified manufacturer and distributor information, source links, package details, engineering use cases, and replacement considerations to support component selection and sourcing. Because the supplied data does not include a complete verified pin table or all peripheral electrical limits, those fields are intentionally not guessed.

RFQ İletişim
STM32F030F4P6TR - 48MHz Cortex-M0 16KB MCU | STMicroelectronics (Tape & Reel)
STM32F030F4P6TR

STM32F030F4P6TR - 48MHz Cortex-M0 16KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030F4P6TR is a value-line 32-bit Arm Cortex-M0 RISC microcontroller operating up to 48 MHz, with 16 KB Flash, 4 KB SRAM, and a 20-pin TSSOP package. Its 2.4 V to 3.6 V operating range and compact pin count suit embedded control, industrial automation, IoT, metering, and motor-control designs requiring low-cost embedded processing. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-control platform. In the hierarchy, the STM32F030F4P6TR is an Arm Cortex-M0 microcontroller, an embedded processor, and a member of the STM32F0 family. The STM32F0 series combines a compact general-purpose architecture with timers, communication interfaces, and analog conversion functions for small control systems. The verified data identifies a high-performance 32-bit RISC core operating at 48 MHz, 16 KB Flash organized as 16K x 8, and 4 KB SRAM according to the distributor and datasheet search results. The device also includes 12-bit and 15-bit ADC capability as stated in the LCSC result, while the manufacturer page identifies enhanced peripherals and I/O resources. Power-on reset and power-down reset functionality is identified in the DigiChip result. The STM32F030F4P6TR is appropriate for compact embedded systems where cost, simplicity, and low pin count matter more than high-speed connectivity or large memory capacity. Its Arm Cortex-M0 instruction set supports deterministic embedded control, while the 48 MHz clock provides a practical balance between processing capability and power efficiency. The 20-pin TSSOP package enables compact PCB layouts while supporting external peripherals and signal inputs. Typical uses include low-cost sensor nodes, simple industrial controllers, compact motor-control stages, digital meters, and connected IoT devices. Designers must ensure that the selected firmware, clock tree, peripherals, and board-level support devices match the STM32F030x4 device requirements. The exact pin function, electrical limits, peripheral configuration, and package dimensions should be confirmed against the STMicroelectronics datasheet. For a new design, the 48 MHz Cortex-M0 core and 16 KB Flash make the STM32F030F4P6TR most suitable for small control loops and auxiliary processing rather than complex graphical or high-bandwidth workloads. The TSSOP-20 package also requires careful PCB escape routing and adequate pin-copper clearance during assembly. This page combines verified manufacturer and distributor information, source links, package details, engineering use cases, and replacement considerations to support component selection and sourcing. Because the supplied data does not include a complete verified pin table or all peripheral electrical limits, those fields are intentionally not guessed.

USD $0,38 Stokta
STM32F030K6T6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
STM32F030K6T6

STM32F030K6T6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F030K6T6 is a 32-bit Arm Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 32-pin LQFP package measuring 7 x 7 mm. It operates from a 2.4 V to 3.6 V supply and combines a compact general-purpose MCU platform with timers, a 12-bit ADC, and communication interfaces. The STM32F030K6 family targets cost-sensitive embedded systems requiring reliable control, data acquisition, and serial connectivity without a high pin count. A microcontroller is a semiconductor that integrates a processor core, memory, and peripherals into one integrated circuit. In the system hierarchy, this device is a microcontroller within the semiconductor category, while its Arm Cortex-M0 core provides a compact RISC architecture for embedded control. Compared with a general-purpose processor, the STM32F030K6T6 integrates the resources needed for real-time firmware execution, peripheral control, and low-power embedded operation on a single device. Key verified features include a 48 MHz maximum CPU frequency, 32 KB of Flash, 4 KB of SRAM, and a 12-bit ADC. The manufacturer describes the STM32F030x4, x6, x8, and xC devices as value-line Arm-based 32-bit MCUs with timers, ADC resources, communication interfaces, and 2.4 V to 3.6 V operation. The 32-LQFP package provides a practical surface-mount footprint for compact industrial and consumer equipment. The device is suitable for simple motor-control peripherals, sensor-hub controllers, compact instrument panels, communication modules, low-speed actuator controllers, and embedded measurement systems. Its 32 KB Flash and 4 KB SRAM fit moderate control loops, protocol stacks, and state machines, although applications requiring larger buffers or image storage should plan memory carefully. The 12-bit ADC supports analog measurements, while communication peripherals enable connection to sensors, displays, and external controllers. When designing a board, begin with the manufacturer datasheet for the complete pin, electrical, timing, and memory map. Provide a stable 2.4 V to 3.6 V supply, route decoupling close to the device, preserve the required reset and clock behavior, and validate unused pins according to the datasheet. Firmware compatibility and peripheral behavior must be checked against the exact STM32F030K6 variant rather than inferred from another STM32 family member. This product page combines verified distributor and manufacturer-source information with package-specific engineering guidance. It identifies the STM32F030K6T6 as the 32 KB, 48 MHz, 32-LQFP member of the STM32F0 value-line family and separates verified specifications from parameters that require design confirmation.

RFQ İletişim
STM32F030K6T6TR - 48MHz Cortex-M0 32KB MCU | STMicroelectronics (Tape & Reel)
STM32F030K6T6TR

STM32F030K6T6TR - 48MHz Cortex-M0 32KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030K6T6TR is a 32-bit Arm Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 32-pin LQFP package measuring 7 x 7 mm. It operates from a 2.4 V to 3.6 V supply and combines a compact general-purpose MCU platform with timers, a 12-bit ADC, and communication interfaces. The STM32F030K6 family targets cost-sensitive embedded systems requiring reliable control, data acquisition, and serial connectivity without a high pin count. A microcontroller is a semiconductor that integrates a processor core, memory, and peripherals into one integrated circuit. In the system hierarchy, this device is a microcontroller within the semiconductor category, while its Arm Cortex-M0 core provides a compact RISC architecture for embedded control. Compared with a general-purpose processor, the STM32F030K6T6TR integrates the resources needed for real-time firmware execution, peripheral control, and low-power embedded operation on a single device. Key verified features include a 48 MHz maximum CPU frequency, 32 KB of Flash, 4 KB of SRAM, and a 12-bit ADC. The manufacturer describes the STM32F030x4, x6, x8, and xC devices as value-line Arm-based 32-bit MCUs with timers, ADC resources, communication interfaces, and 2.4 V to 3.6 V operation. The 32-LQFP package provides a practical surface-mount footprint for compact industrial and consumer equipment. The device is suitable for simple motor-control peripherals, sensor-hub controllers, compact instrument panels, communication modules, low-speed actuator controllers, and embedded measurement systems. Its 32 KB Flash and 4 KB SRAM fit moderate control loops, protocol stacks, and state machines, although applications requiring larger buffers or image storage should plan memory carefully. The 12-bit ADC supports analog measurements, while communication peripherals enable connection to sensors, displays, and external controllers. When designing a board, begin with the manufacturer datasheet for the complete pin, electrical, timing, and memory map. Provide a stable 2.4 V to 3.6 V supply, route decoupling close to the device, preserve the required reset and clock behavior, and validate unused pins according to the datasheet. Firmware compatibility and peripheral behavior must be checked against the exact STM32F030K6 variant rather than inferred from another STM32 family member. This product page combines verified distributor and manufacturer-source information with package-specific engineering guidance. It identifies the STM32F030K6T6TR as the 32 KB, 48 MHz, 32-LQFP member of the STM32F0 value-line family and separates verified specifications from parameters that require design confirmation.

RFQ İletişim
STM32F030R - Cortex-M0 48MHz MCU, 64KB Flash, 64-LQFP | ST
STM32F030R

STM32F030R - Cortex-M0 48MHz MCU, 64KB Flash, 64-LQFP | ST

The STMicroelectronics STM32F030R is a value-line ARM Cortex-M0 32-bit RISC microcontroller operating at 48 MHz, integrating up to 64 KB of Flash memory and housed in a 64-pin LQFP package. Operating from a 2.4 V to 3.6 V supply, the device delivers 38.4 DMIPS while consuming only a few milliamps in run mode, making it a leading low-power option in the entry-level STM32 family. This particular variant is the STM32F030R8T6 (64-pin LQFP, 64 KB Flash, industrial -40C to +85C), one of the most widely adopted members of the STM32F030 series. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory (Flash for code, SRAM for data), and a rich set of programmable peripherals on a single die. The Cortex-M0 is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for cost-sensitive, deterministic embedded applications. Within the ST portfolio, the STM32F0 sits below the Cortex-M3/M4 STM32F1/F3 lines and above the 8-bit STM8, occupying the mainstream 32-bit entry point. The STM32F030 specifically targets cost-down designs that previously used 8/16-bit MCUs but now require 32-bit performance, USB-less connectivity, and ST's strong STM32 tool ecosystem (CubeMX, HAL, Standard Peripheral Library). Key features include a 12-bit 1 MSPS ADC with up to 16 channels, multiple 16-bit and 32-bit timers (including PWM, input capture, and quadrature encoder support), two I2C, two SPI (one I2S-capable), one USB 2.0 Full-Speed (device mode, on R8/C0/C8/CB parts), one CAN 2.0B (RC0/RC8 variants), and up to 55 GPIO. An integrated 8 MHz HSI RC oscillator with 1% accuracy and a 40 kHz LSI reduce external component count. The 64-LQFP package provides 64 pins at 10 mm x 10 mm body, including dedicated pins for BOOT0, NRST, OSC_IN/OSC_OUT, and full SWD debug. The architecture pairs a 3-stage pipeline Cortex-M0 core with a 32-bit AHB-Lite bus and a multi-channel DMA controller. The Nested Vectored Interrupt Controller (NVIC) handles up to 32 maskable interrupts with deterministic 16-cycle latency. A cyclic redundancy check (CRC) peripheral, two watchdogs (IWDG/WWDG), and a 7-channel DMA accelerate data movement without CPU overhead. Typical applications include consumer appliances (washing machines, induction cookers), industrial sensor hubs, USB HID peripherals, low-cost CAN nodes, smart meters, and home automation. The compact LQFP-64 footprint and 48 MHz clock headroom make it a common choice for migration paths from 8-bit PIC/AVR designs into the STM32 ecosystem. When designing with the STM32F030R, ensure each VDD/VDDA pin pair has a 100 nF decoupling capacitor placed within 2 mm of the pin, and consider the BOOT0 strap resistor for boot mode selection. The 64-LQFP package has limited thermal headroom at high ambient temperatures, so verify junction temperature under worst-case load. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application companion parts, and practical design notes drawn from multiple sources, including the official ST datasheet, DigiKey listings, and ST community resources - not found in any single source.

RFQ İletişim
STM32F030R8T6 - 64KB Flash ARM Cortex-M0 48MHz MCU | STMicroelectronics
STM32F030R8T6

STM32F030R8T6 - 64KB Flash ARM Cortex-M0 48MHz MCU | STMicroelectronics

The STMicroelectronics STM32F030R8T6 is a 32-bit ARM Cortex-M0 value-line microcontroller from the STM32F0 series, integrating 64KB of Flash memory and 8KB of SRAM in a 64-pin LQFP package rated for industrial temperature operation. It runs at a maximum core frequency of 48 MHz, supports a 2.4V to 3.6V supply voltage, and exposes 51 GPIO pins for flexible peripheral expansion in cost-sensitive embedded designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, volatile and non-volatile memory, and programmable I/O peripherals on a single silicon die. The STM32F030R8T6 belongs to the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, with its Cortex-M0 core positioning it in the entry-level, low-power tier that targets cost-sensitive applications replacing 8-bit/16-bit legacy MCUs. Key features include 64KB of Flash, 8KB of SRAM, an integrated 12-bit ADC with up to 16 channels, a 12-bit DAC, multiple 16-bit and 32-bit timers, two I2C, two SPI, and up to five USART interfaces, plus a hardware CRC calculation unit. The 64-pin LQFP package supports surface-mount assembly and provides generous analog and digital I/O for mixed-signal embedded boards. Architecturally, the device uses a 32-bit ARM Cortex-M0 core with single-cycle I/O access, achieving 0.9 DMIPS/MHz and supporting Thumb-2 instruction subsets for compact code density. Built-in peripherals include a real-time clock (RTC), DMA controller, and power-on reset/power-down reset (POR/PDR), with multiple low-power modes to extend battery runtime. The integrated 8 MHz HSI oscillator is factory-trimmed to within 1 percent accuracy, reducing the bill of materials for cost-driven designs. Typical applications include industrial control, consumer electronics, IoT edge nodes, home automation, motor control, and sensor interfaces. The wide peripheral set, small package, and low cost make it well suited to high-volume products where deterministic real-time response is required. When designing with this MCU, provide decoupling capacitors on every VDD pin (100 nF ceramic + 4.7 uF bulk), use the SWD interface for in-system programming and on-chip debug, and verify that the external crystal load capacitance matches the oscillator specification when an HSE source is required. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes beyond what the ST datasheet provides, delivering a consolidated reference for engineers evaluating the STM32F030R8T6.

USD $1,31 İletişim
STM32F030R8T6TR - 64KB Flash ARM Cortex-M0 48MHz MCU | STMicroelectronics (Tape & Reel)
STM32F030R8T6TR

STM32F030R8T6TR - 64KB Flash ARM Cortex-M0 48MHz MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030R8T6TR is a 32-bit ARM Cortex-M0 value-line microcontroller from the STM32F0 series, integrating 64KB of Flash memory and 8KB of SRAM in a 64-pin LQFP package rated for industrial temperature operation. It runs at a maximum core frequency of 48 MHz, supports a 2.4V to 3.6V supply voltage, and exposes 51 GPIO pins for flexible peripheral expansion in cost-sensitive embedded designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, volatile and non-volatile memory, and programmable I/O peripherals on a single silicon die. The STM32F030R8T6TR belongs to the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, with its Cortex-M0 core positioning it in the entry-level, low-power tier that targets cost-sensitive applications replacing 8-bit/16-bit legacy MCUs. Key features include 64KB of Flash, 8KB of SRAM, an integrated 12-bit ADC with up to 16 channels, a 12-bit DAC, multiple 16-bit and 32-bit timers, two I2C, two SPI, and up to five USART interfaces, plus a hardware CRC calculation unit. The 64-pin LQFP package supports surface-mount assembly and provides generous analog and digital I/O for mixed-signal embedded boards. Architecturally, the device uses a 32-bit ARM Cortex-M0 core with single-cycle I/O access, achieving 0.9 DMIPS/MHz and supporting Thumb-2 instruction subsets for compact code density. Built-in peripherals include a real-time clock (RTC), DMA controller, and power-on reset/power-down reset (POR/PDR), with multiple low-power modes to extend battery runtime. The integrated 8 MHz HSI oscillator is factory-trimmed to within 1 percent accuracy, reducing the bill of materials for cost-driven designs. Typical applications include industrial control, consumer electronics, IoT edge nodes, home automation, motor control, and sensor interfaces. The wide peripheral set, small package, and low cost make it well suited to high-volume products where deterministic real-time response is required. When designing with this MCU, provide decoupling capacitors on every VDD pin (100 nF ceramic + 4.7 uF bulk), use the SWD interface for in-system programming and on-chip debug, and verify that the external crystal load capacitance matches the oscillator specification when an HSE source is required. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes beyond what the ST datasheet provides, delivering a consolidated reference for engineers evaluating the STM32F030R8T6TR.

USD $1,31 İletişim
STM32F030RCT6 - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics
STM32F030RCT6

STM32F030RCT6 - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics

The STM32F030RCT6 is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics, featuring a 48 MHz CPU, 256 KB of Flash memory, and 32 KB of SRAM in an LQFP-64 package. It operates from a 2.4V to 3.6V supply and offers a rich set of peripherals including multiple USARTs, SPIs, I2Cs, ADCs, timers, and GPIOs. Data verified as of 2026-08-05. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. The STM32F030RCT6 belongs to the STM32F0 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy places it within the embedded processing domain, where it serves as the central control unit for applications ranging from industrial automation to consumer electronics. Key features include a 48 MHz ARM Cortex-M0 core, 256 KB Flash, 32 KB SRAM, and a comprehensive set of peripherals: 5 USARTs, 2 SPIs, 2 I2Cs, 1 12-bit ADC with up to 16 channels, 8 timers, and up to 51 GPIOs. The device supports a wide operating temperature range of -40°C to +85°C and is available in an LQFP-64 package, making it suitable for space-constrained designs. Technically, the STM32F030RCT6 is built on a 90nm process technology, offering a balance of performance and power efficiency. The ARM Cortex-M0 core is a low-power, high-efficiency processor designed for cost-sensitive applications. The device includes a nested vectored interrupt controller (NVIC), a SysTick timer, and a memory protection unit (MPU) for enhanced reliability. It also features a 12-bit ADC with hardware oversampling, enabling high-resolution analog measurements. Typical applications include industrial control systems, motor control, consumer electronics, IoT devices, and home automation. The rich peripheral set and large Flash memory make it ideal for applications requiring complex firmware and multiple communication interfaces. For example, in an industrial sensor node, the STM32F030RCT6 can interface with sensors via I2C or SPI, process data, and communicate over USART or CAN. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor for accurate ADC conversions. The BOOT0 pin must be configured correctly to select the boot mode, and the NRST pin should have an external pull-up resistor and a 100nF capacitor for reliable reset. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers evaluating the STM32F030RCT6 for their next design.

RFQ İletişim
STM32F030RCT6TR - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics (Tape & Reel)
STM32F030RCT6TR

STM32F030RCT6TR - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics (Tape & Reel)

The STM32F030RCT6TR is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics, featuring a 48 MHz CPU, 256 KB of Flash memory, and 32 KB of SRAM in an LQFP-64 package. It operates from a 2.4V to 3.6V supply and offers a rich set of peripherals including multiple USARTs, SPIs, I2Cs, ADCs, timers, and GPIOs. Data verified as of 2026-08-05. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. The STM32F030RCT6TR belongs to the STM32F0 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy places it within the embedded processing domain, where it serves as the central control unit for applications ranging from industrial automation to consumer electronics. Key features include a 48 MHz ARM Cortex-M0 core, 256 KB Flash, 32 KB SRAM, and a comprehensive set of peripherals: 5 USARTs, 2 SPIs, 2 I2Cs, 1 12-bit ADC with up to 16 channels, 8 timers, and up to 51 GPIOs. The device supports a wide operating temperature range of -40°C to +85°C and is available in an LQFP-64 package, making it suitable for space-constrained designs. Technically, the STM32F030RCT6TR is built on a 90nm process technology, offering a balance of performance and power efficiency. The ARM Cortex-M0 core is a low-power, high-efficiency processor designed for cost-sensitive applications. The device includes a nested vectored interrupt controller (NVIC), a SysTick timer, and a memory protection unit (MPU) for enhanced reliability. It also features a 12-bit ADC with hardware oversampling, enabling high-resolution analog measurements. Typical applications include industrial control systems, motor control, consumer electronics, IoT devices, and home automation. The rich peripheral set and large Flash memory make it ideal for applications requiring complex firmware and multiple communication interfaces. For example, in an industrial sensor node, the STM32F030RCT6TR can interface with sensors via I2C or SPI, process data, and communicate over USART or CAN. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor for accurate ADC conversions. The BOOT0 pin must be configured correctly to select the boot mode, and the NRST pin should have an external pull-up resistor and a 100nF capacitor for reliable reset. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers evaluating the STM32F030RCT6TR for their next design.

RFQ İletişim
STM32F031C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics
STM32F031C6T6

STM32F031C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F031C6T6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 32 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It is designed for compact embedded systems requiring efficient control processing, GPIO, timers, analog conversion, and serial connectivity. The device belongs to the STM32F0 entry-level microcontroller family and combines a RISC processor core with embedded memory and peripherals in one integrated circuit. An embedded microcontroller is a self-contained programmable controller used to monitor inputs, execute control logic, and drive outputs in products such as instruments, appliances, industrial modules, and communication equipment. The STM32F031C6T6 uses the ARM Cortex-M0 architecture, a compact processor core designed for low-complexity control tasks, while its operating frequency supports responsive software execution and peripheral activity. Verified distributor information identifies the part as a 32-bit, 48 MHz microcontroller with 32 KB Flash organized as 32K x 8. The STM32F031x4/x6 family is described by STMicroelectronics as incorporating the ARM Cortex-M0 core and high-speed embedded resources. The exact RAM size, ADC resolution, timer count, supply range, and package pin assignments are not provided in the supplied verified excerpts and are therefore marked as data needed below. Typical design uses include sensor conditioning, motor or actuator sequencing, digital control panels, low-cost communications, LED control, and general embedded products. Firmware should be developed with the STM32 toolchain and configured around the exact datasheet pinout and peripheral characteristics. Hardware design must preserve the package footprint and verify every signal, power pin, decoupling requirement, and exposed-pin connection against the manufacturer datasheet. This page combines verified manufacturer and distributor information with explicit data gaps rather than inventing electrical values. It is intended to support initial component selection, sourcing, and comparison while directing engineers to the official STMicroelectronics documentation for final design release. The information is current as of 2026-10-23.

RFQ İletişim
STM32F031G4U6 - 48MHz Cortex-M0 MCU 16KB Flash | STMicroelectronics
STM32F031G4U6

STM32F031G4U6 - 48MHz Cortex-M0 MCU 16KB Flash | STMicroelectronics

The STMicroelectronics STM32F031G4U6 is an ARM Cortex-M0 32-bit RISC microcontroller operating at up to 48 MHz, integrating 16 KB of Flash memory and 4 KB of SRAM in a 28-pin UFQFPN (4x4 mm) package. The device operates from a 2.0 V to 3.6 V supply, supporting both 2.5 V and 3.3 V typical rails used by sensor, motor, and human-machine-interface (HMI) designs. The suffix "U6" denotes the UFQFPN-28 tape-and-reel packaging option qualified for industrial -40 °C to +85 °C operation. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces such as timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, an MCU belongs to the microcontroller family, which sits inside the integrated-circuit (IC) hierarchy and the embedded-computing product domain. Cortex-M0 is ARM's smallest and most energy-efficient core, designed for deterministic real-time control with a minimal instruction set and ultra-low gate count. Key specifications include a 12-bit ADC with up to 10 external channels, a 16-bit advanced-control timer for motor driving, multiple 16-bit and 32-bit general-purpose timers, communication interfaces (I2C, SPI, USART), an integrated voltage reference, brown-out reset (BOR), and a watchdog timer. The UFQFPN-28 footprint exposes 23 GPIO and embeds a 1-channel DMA controller for offloading data moves from the core, improving determinism in interrupt-driven loops. The architecture uses a single AHB-Lite bus matrix connecting the Cortex-M0 core, Flash, SRAM, and peripherals. The advanced-control timer supports complementary PWM outputs with dead-time insertion and an emergency stop input, making the part well-suited for brushless-DC (BLDC) and permanent-magnet synchronous motor (PMSM) commutation. The 12-bit ADC achieves a 1 µs conversion time and supports hardware oversampling to reach 16-bit effective resolution when required. Typical applications include BLDC and stepper motor control (small fans, pumps, e-bike throttles), sensor nodes and home-automation bridges, low-cost HMI panels and e-metering front-ends, industrial 24 V→3 V signal-conditioning modules, and consumer appliances requiring low pin-count, deterministic control. The wide 2.0–3.6 V range supports direct connection to a single Li-ion cell or to a regulated 3.3 V LDO downstream of a 5 V or 12 V bus. When designing with this MCU, plan the decoupling network (100 nF + 4.7 µF close to VDD pins) and ensure NRST is pulled up with the recommended 10 kΩ and a 100 nF capacitor for noisy industrial enclosures. The BOOT0 pin must be tied to GND through a 10 kΩ resistor on production boards to lock the part into main-Flash boot; floating BOOT0 is a common field-failure cause.

RFQ İletişim
STM32F031K4U6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
STM32F031K4U6

STM32F031K4U6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

The STMicroelectronics STM32F031K4U6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 16 KB of Flash memory and 27 I/O pins, housed in a 32-pin UFQFPN 5 x 5 mm package. The device provides 2.5 V and 3.3 V supply options and is positioned as an entry-level embedded-control MCU for compact industrial, consumer, communications, and automation products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The STM32F031K4U6 belongs to the hierarchy MCU -> embedded microcontroller -> ARM Cortex-M0 microcontroller -> STM32F0 series. Its Cortex-M0 architecture provides a 32-bit RISC processing environment while supporting peripherals commonly required for embedded products, including LIN, timers, PWM, SPI, UART/USART, I2C, IrDA, DMA, I2S, POR, and watchdog functions. The principal feature set includes a 48 MHz maximum operating frequency, 16 KB Flash program memory, a 32-pin compact package, and up to 27 I/O pins. The Flash-oriented organization of 16K x 8 supports embedded firmware storage, while the 5 x 5 mm UFQFPN package is suitable for space-constrained assemblies. Available sourcing information identifies this exact ordering code as a 2.5 V or 3.3 V device. The STM32F031K4U6 combines a general-purpose Cortex-M0 core with serial communication and timing resources suited to real-time control. Its reported peripherals include I2C, IrDA, LINbus, SPI, UART/USART, DMA, I2S, POR, PWM, and WDT. These interfaces allow the MCU to connect sensors, actuators, human-interface devices, communications transceivers, and audio converters without requiring several separate interface devices. Typical uses include compact sensor nodes, industrial control modules, LIN-connected peripherals, communication equipment, motor and actuator controllers, and small consumer products. The 48 MHz processing rate provides additional timing margin for interrupt-driven control and protocol handling, while the 27 available I/O pins support multiple digital connections on a compact board. Designers should verify the exact exposed-pad connection, decoupling requirements, clock configuration, and peripheral pin assignments against the manufacturer documentation before layout release. The target package is a 32-pin UFQFPN, and the thermal behavior of its exposed pad depends on the PCB copper area, solder mask, and thermal via arrangement. The verified excerpts do not provide the complete pin names, so no pin-level assignments are inferred here. This product page consolidates verified distributor pricing, package and memory details, sourced drop-in candidates, and practical selection guidance. It distinguishes documented STM32F031K4U6 attributes from compatibility claims that require schematic, firmware, ADC, clock, and low-power validation before production substitution.

RFQ İletişim
STM32F031K6T6 - 48MHz Cortex-M0 MCU | STMicroelectronics
STM32F031K6T6

STM32F031K6T6 - 48MHz Cortex-M0 MCU | STMicroelectronics

STMicroelectronics STM32F031K6T6 is an ARM Cortex-M0 32-bit RISC microcontroller operating at up to 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 32-LQFP 7 x 7 mm package. The device also provides 25 I/Os, nine timers, a 12-bit ADC, one I2C interface, one SPI/I2S interface, one USART, and operation from 2.0 V to 3.6 V. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and general-purpose I/O in one package. The STM32F031 belongs to the STM32F0 access-line family, where ARM Cortex-M0 -> 32-bit RISC microcontroller -> embedded microcontroller -> semiconductor forms the relevant product hierarchy. Its compact package and mixed-signal peripherals suit cost-sensitive embedded-control products that require deterministic control without a higher-performance MCU. Key features include a 48 MHz ARM Cortex-M0 core, 32 KB of Flash for firmware storage, and 4 KB of SRAM for working memory. The 12-bit ADC supports analog measurement, while the I2C, SPI/I2S, and USART interfaces cover sensor buses, serial peripherals, and point-to-point communication. Nine timers support periodic and timing functions, and the 2.0 V to 3.6 V operating range permits integration with common 3.3 V embedded systems. The STM32F031K6 architecture emphasizes compact control rather than high-performance computation. Its 32-bit Cortex-M0 instruction set provides efficient control-loop execution, while the integrated analog and serial peripherals reduce the need for external components. Available SRAM and Flash should be checked against the final application, particularly when buffering samples, maintaining protocol stacks, or supporting bootloader features. Typical applications include compact sensor controllers, small motor-control systems, industrial monitoring nodes, digital control modules, battery-powered instruments, and communication equipment. The STM32F031K6T6 is particularly relevant where 48 MHz processing, 25 I/Os, and multiple serial interfaces are required within a 32-LQFP footprint. Designers should verify the exact pin assignment, alternate-function requirements, decoupling network, clock configuration, and peripheral instance mapping against the manufacturer datasheet. The 2.0 V minimum supply imposes a 3.3 V rail design constraint, and firmware should include reset, clock, ADC-calibration, and brownout handling appropriate to the selected power architecture. This page consolidates the verified manufacturer specifications, distributor availability references, cross-reference evidence, and engineering guidance into a structured selection resource. It distinguishes verified drop-in evidence from generic MCU alternatives and highlights the limits of using an unqualified third-party replacement in production.

RFQ İletişim
STM32F031K6U6 - 48MHz Cortex-M0 MCU 32KB Flash | STMicroelectronics
STM32F031K6U6

STM32F031K6U6 - 48MHz Cortex-M0 MCU 32KB Flash | STMicroelectronics

The STM32F031K6U6 is a 32-bit entry-level microcontroller from STMicroelectronics based on the ARM Cortex-M0 core, operating at up to 48 MHz with 32 KB of Flash memory and 4 KB of SRAM in a compact 32-pin UFQFPN (5x5 mm) package with exposed pad. A microcontroller (MCU) is a single-chip embedded processor combining a CPU core, memory, and programmable peripherals. The STM32F031K6U6 belongs to the STM32F0 entry-level family within the STM32 MCU ecosystem, positioned as a migration path from 8-bit and 16-bit MCUs to 32-bit ARM performance. It shares tooling, HAL libraries, and STM32CubeMX configuration software with the wider STM32 portfolio, simplifying future upgrades. Key features include a 12-bit ADC with up to 13 channels, 9 timers, and standard communication interfaces: one I2C, one SPI/I2S, and one USART. The device operates from a 2.0V to 3.6V single supply with integrated POR/PDR reset, and offers a CRC calculation unit and DMA controller for data movement without CPU intervention. Real-time performance is supported by a nested vectored interrupt controller (NVIC) and single-cycle multiplier. The Cortex-M0 architecture executes Thumb instruction sets with deterministic interrupt latency, making the device suitable for real-time control loops. The UFQFPN-32 (QFN family) surface-mount package provides a small 5x5 mm footprint with an exposed thermal pad for grounding, ideal for space-constrained boards. Operating temperature spans -40C to +85C for industrial reliability. Typical applications include industrial control, consumer appliances, IoT sensor nodes, small motor control, and power-management subsystems, where low cost, low power consumption, and adequate peripheral integration matter most. Design tip: decouple VDD pins with 100nF ceramics plus a bulk capacitor, feed VDDA from a clean analog supply to preserve ADC accuracy, and keep NRST properly filtered per the ST datasheet layout guidelines for EMI-robust designs.

RFQ İletişim