Ürünler (21.000+)

STM8L151G6U3TR - 16MHz 32KB Low-Power MCU | ST (Tape & Reel)
STM8L151G6U3TR

STM8L151G6U3TR - 16MHz 32KB Low-Power MCU | ST (Tape & Reel)

STMicroelectronics STM8L151G6U3TR is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory, and a 28-pin UFQFPN package measuring 4 mm by 4 mm. It operates from a 1.8 V to 3.6 V supply and targets compact embedded systems that require energy-conscious control, mixed-signal measurement, and communication peripherals without requiring a high-end 32-bit processor. An ultra-low-power microcontroller, or ULP MCU, is an energy-efficient semiconductor designed to remain responsive while consuming minimal power during active operation, standby, and wake-up transitions. The STM8L151 belongs to the STM8L EnergyLite family within STMicroelectronics' broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor devices. Its low-power architecture makes it suitable for battery-operated sensors, portable instruments, industrial controls, and connected products that spend substantial time waiting for events. The STM8L151G6U3TR provides 32 KB Flash, 2 KB of on-chip RAM, a 12-bit ADC, and a DAC according to the supplied manufacturer and distributor data. Its integrated peripheral set also includes an RTC, data EEPROM, timers, USART, I2C, SPI, comparators, and LCD support. These resources allow a compact design to sample analog inputs, maintain real-time information, communicate with sensors or external controllers, and drive a segment LCD without requiring several separate devices. The enhanced STM8 CPU core operates at up to 16 MHz, providing up to 16 MIPS according to the manufacturer family information. The device combines a 28-pin 4 mm by 4 mm UFQFPN package with analog and serial-interface functions, enabling high component density in space-constrained products. Its exact peripheral configuration, current consumption, timing limits, and absolute electrical limits should be confirmed against the current STMicroelectronics datasheet before a production design is released. Typical applications include low-energy environmental sensors, battery-powered measurement modules, compact industrial controllers, wearable accessories, smart-home endpoints, and small instrumentation products. For a sensor node, the ADC and timers can support periodic measurements while the RTC and low-power modes help control idle consumption. The USART, I2C, and SPI interfaces support external sensors, transceivers, memory, and host controllers, while LCD support is useful for local human-readable output. A critical design consideration is supply-voltage headroom. The MCU operates from 1.8 V to 3.6 V, so battery chemistry, regulator dropout, transient response, and brownout behavior must be evaluated together. Decoupling capacitors should be placed close to the supply pins, unused inputs should be configured appropriately, and low-power modes should be validated with the intended peripheral states rather than only with the core active. This page consolidates verified manufacturer and distributor information, package and interface guidance, pricing context, and practical application analysis. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet, supporting faster engineering comparison without treating unverified alternatives as drop-in replacements.

RFQ İletişim
STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics
STM8L151G6U6

STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

The STM8L151G6U6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It operates at a clock speed of 16 MHz and features 32 KB of Flash memory, 2 KB of SRAM, and 1 KB of data EEPROM. The device is housed in a compact 28-pin UFQFPN (4x4 mm) package, making it ideal for space-constrained applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), which processes data in 8-bit chunks. It integrates a processor core, memory (Flash, SRAM, EEPROM), and programmable peripherals (timers, communication interfaces, ADC, DAC) on a single integrated circuit. In the system hierarchy, an 8-bit MCU is a type of embedded controller, which falls under the broader category of microcontrollers, which are themselves a subset of integrated circuits used in embedded systems. The STM8L151G6U6 is specifically optimized for ultra-low-power operation, targeting battery-powered and energy-harvesting applications. Key features of the STM8L151G6U6 include a 16 MHz CPU clock, 32 KB Flash memory, 2 KB SRAM, and 1 KB data EEPROM. It also integrates a 12-bit ADC, a 12-bit DAC, two comparators, an RTC, LCD driver, and multiple communication interfaces (USART, I2C, SPI). The device supports a wide supply voltage range of 1.8V to 3.6V, and its ultra-low-power modes include a Halt mode with 0.35 µA current consumption, making it suitable for battery-powered devices. The STM8L151G6U6 is built on ST's low-power 8-bit core, which is designed for energy efficiency. It features a modular peripheral set that is shared across STM8 and STM32 families, simplifying code migration. The device includes a 4-channel DMA controller, which offloads data transfer tasks from the CPU, improving overall system performance. The ultra-low-power design extends battery life in portable applications. Typical applications include portable medical devices, sensor nodes, smart meters, and industrial control systems. The device's low power consumption and rich peripheral set make it ideal for applications requiring long battery life and reliable operation. For example, in a wireless sensor node, the STM8L151G6U6 can wake up periodically, read sensors, and transmit data via its USART or SPI interface, then return to Halt mode to conserve power. When designing with the STM8L151G6U6, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to the VDD and VSS pins. The device's low-power modes require careful configuration of the clock system and peripheral clocks to achieve the specified current consumption. Additionally, the UFQFPN-28 package has an exposed pad that should be connected to ground for optimal thermal performance.

RFQ İletişim
STM8L151G6U7 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151G6U7

STM8L151G6U7 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G6U7 is an ultra-low-power 8-bit CISC microcontroller with a 16 MHz CPU, 32 KB of Flash memory, integrated EEPROM, and a 28-pin UFQFPN 4x4 mm package. It belongs to the medium-density STM8L151x4/6 device family, combining low-power sensing and control capabilities with ADC, DMA, and embedded EEPROM resources. The target is the STM8L EnergyLite line, where the MCU provides dedicated low-power operating modes and fast wake-up behavior for compact, battery-operated systems. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumed during idle, sleep, and standby operation while still providing enough processing capability for control tasks. The STM8L family sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor products. Its CISC architecture and integrated peripherals are intended to reduce external component count in low-speed sensing, metering, portable-instrumentation, and industrial-control designs. Key verified characteristics include a maximum CPU frequency of 16 MHz, 32 KB of Flash organized as 32K x 8, and a 28-pin UFQFPN package. The supplied distributor listing also identifies 2 KB of EEPROM, while the manufacturer describes the STM8L151G6 as a medium-density member of the STM8L ultra-low-power 8-bit family. Its integrated ADC and DMA support makes it useful where sampled analog signals must be transferred without excessive processor involvement. The STM8L151G6U7 architecture is tailored for low-power sensing and embedded control rather than high-throughput applications. Flash provides the main firmware area, integrated EEPROM supports nonvolatile data storage, and the ADC/DMA resources reduce the need for separate signal-acquisition components. The 4x4 mm UFQFPN footprint is suitable for space-constrained assemblies, although its fine pitch requires capable PCB assembly and careful land-pattern design. Typical uses include battery-powered environmental sensors, compact metering instruments, low-speed industrial controllers, portable measurement equipment, and connected sensing nodes. The MCU is appropriate when energy efficiency, integrated data acquisition, and a small footprint matter more than a high-pin-count interface or a large program-memory budget. Designers should also evaluate the available peripheral mix and PCB assembly capability for the 0.6 mm-class package before releasing a design to production. For implementation, follow the STMicroelectronics pin assignment and recommended decoupling guidance rather than relying on a generic QFN land pattern. Verify the exposed-pad connection, programming interface, oscillator arrangement, and ADC input routing against the official device documentation. Because the provided source snippets do not expose the complete pin table, electrical limits, or operating-temperature grades, those details require confirmation in the manufacturer datasheet before layout signoff. This page combines verified manufacturer and distributor facts with package-level selection guidance, comparison criteria, sourcing links, and engineering-oriented usage analysis. It distinguishes confirmed device characteristics from unavailable details instead of estimating missing electrical values, helping engineers make an initial selection while preserving a traceable path to the official STM8L151G6 documentation.

RFQ İletişim
STM8L151K2U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics
STM8L151K2U6

STM8L151K2U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K2U6 is an ultra-low-power 8-bit microcontroller with an STM8L EnergyLite CPU core, operating up to 16 MHz and delivering up to 16 MIPS of processing performance. It includes 4 KB of flash program memory and is supplied in a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device is designed for compact, low-energy embedded systems where fast wake-up, low supply voltage operation, and a broad set of peripheral functions are important. An STM8L is an ultra-low-power microcontroller family within the wider microcontroller and embedded-processing hierarchy. It combines a simple 8-bit CISC architecture with power-management features intended for battery-operated and always-on equipment. The STM8L151x2 and STM8L151x3 devices share the low-density platform, while the K2 designation identifies this 32-pin, 4 KB Flash configuration. This combination allows designers to use the same MCU family for sensing, control, communication, and low-power monitoring functions. The STM8L151K2U6 operates from a 1.8 V to 3.6 V supply, as stated by the manufacturer product information, and provides a maximum clock speed of 16 MHz. Its 41 I/O ports support compact embedded layouts, while the 12-bit and 30-bit peripheral capabilities referenced in the product listing support common control and measurement tasks. The low-power architecture is useful for sensor nodes, industrial controls, portable instruments, and battery-powered accessories. The part is identified as an active, ultra-low-power MCU by STMicroelectronics and is offered in a 32-pin UFQFPN package. Its principal engineering trade-off is the modest 4 KB Flash capacity compared with larger STM8 devices. Firmware should therefore be structured for efficient storage, and application requirements involving graphical interfaces, large protocol stacks, or extensive data logging should be reviewed before design freeze. Typical applications include industrial sensor nodes, low-power wireless-control endpoints, portable measurement products, and embedded accessory controllers. Designers should preserve adequate decoupling close to the supply pins, confirm exposed-pad soldering requirements from the manufacturer datasheet, and validate low-power modes against the actual sensor and communication load. These measures help preserve the intended low-power behavior while maintaining signal integrity and reliable startup. This page organizes the manufacturer product information, distributor listing details, package characteristics, and application guidance for engineers evaluating STM8L151K2U6. It also highlights the memory-density limitation, supply-voltage range, low-power positioning, and practical PCB considerations that distinguish this MCU from larger STM8L variants.

RFQ İletişim
STM8L151K3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K3U3

STM8L151K3U3 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K3U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz enhanced STM8 CPU core, up to 16 MIPS processing performance, and 8 KB of embedded Flash memory. The device is packaged in a 32-pin UFQFPN with exposed pad measuring 5 mm by 5 mm and operates from a 1.8 V to 3.6 V supply range. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals into one compact device. The STM8L belongs to the STM8L EnergyLite family, a low-power branch of STM8 microcontrollers used for embedded control, sensing, communications, and battery-powered products. Its role within an embedded system is to execute application firmware, acquire sensor data, control outputs, and coordinate low-energy operating modes. The STM8L151K3U3 provides 41 I/O ports and an 8 KB Flash program memory within its 32-pin package. Its enhanced STM8 core reaches 16 MIPS at 16 MHz, supporting responsive control tasks while the EnergyLite architecture emphasizes low-power operation. The 1.8 V to 3.6 V operating range accommodates 1.8 V and 3.3 V systems, while the UFQFPN-32 package supports compact surface-mount PCB layouts. The STM8L151x2 and STM8L151x3 devices target low-density designs where memory economy and low power are more important than a large general-purpose peripheral set. The STM8L151K3U3 is the UFQFPN-32 ordering configuration with 8 KB Flash. Firmware should be selected around the STM8L low-power operating model, and unused pins should be handled according to the manufacturer pin-description and connection guidance. Typical applications include low-power sensor nodes, compact industrial controls, building and access equipment, battery-operated instruments, connected sensing devices, and portable products. Its 41 I/O ports are useful for digital monitoring and control, while the 8-bit architecture and 16 MHz clock are appropriate for embedded tasks that do not require a high-performance 32-bit processor. A key design consideration is the exposed-pad thermal and electrical connection in the UFQFPN package. The exposed pad should be connected according to the manufacturer layout guidance, and the PCB should provide suitable copper area for heat spreading and low-impedance supply distribution. Firmware must also verify the device's low-power wake-up behavior against the response time required by the end application. This page combines manufacturer specifications, package and sourcing details, practical application guidance, and verified comparison information. It is intended to help engineers assess whether the STM8L151K3U3's memory size, I/O count, clock rate, voltage range, and low-power architecture match a specific embedded-control design.

RFQ İletişim
STM8L151K3U6 - 16MHz 8KB Low-Power MCU | STMicroelectronics
STM8L151K3U6

STM8L151K3U6 - 16MHz 8KB Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K3U6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with up to 16 MIPS at 16 MHz, 8 KB of Flash memory, and a 32-pin UFQFPN package rated for a 1.8 V to 3.6 V supply range. Its combination of an 8-bit CISC core, compact footprint, and low-power operation suits embedded control, sensing, and connected battery-powered products. An ultra-low-power microcontroller is an embedded semiconductor designed to execute control tasks while minimizing energy consumption during active operation, sleep, and standby. The STM8L151K3 belongs to the STM8L EnergyLite hierarchy of 8-bit microcontrollers, combining real-time control with peripheral integration for compact industrial, consumer, and IoT equipment. The principal characteristics include a maximum clock frequency of 16 MHz, processing performance up to 16 MIPS, 8 KB of program Flash, and approximately 41 I/O ports. According to the STMicroelectronics product page, the enhanced STM8 core increases processing power while retaining the architecture's straightforward embedded-control focus. Operation from 1.8 V to 3.6 V also allows integration with low-energy sensor nodes and modern 3.3 V system rails. The device's 32-pin UFQFPN package provides a compact surface-mount solution with an exposed pad. Its small land pattern is useful in space-constrained products, although thermal design, soldering profile, and exposed-pad layout must follow the manufacturer's package guidance. The specified temperature options cover −40 °C to 85 °C or −40 °C to 125 °C, supporting both commercial and extended-temperature industrial designs. Typical applications include low-power sensor nodes, building and industrial control modules, compact instrumentation, battery-operated accessories, and IoT equipment that periodically wakes to acquire and process data. The 8-bit architecture is especially effective for control loops, user-interface handling, communications, and peripheral coordination where simple instruction execution and deterministic behavior are more important than high computational throughput. When laying out a circuit, treat the exposed thermal pad and its via pattern as part of the electrical and thermal design rather than as an optional copper feature. Confirm pin functions, decoupling requirements, programming connections, and operating limits against the manufacturer datasheet for the exact ordering code before releasing the PCB. This page combines the manufacturer product information with package, application, purchasing, and drop-in replacement guidance to help engineers evaluate the STM8L151K3U6 before schematic capture and PCB layout.

RFQ İletişim
STM8L151K4T3 - 16MHz 16KB Ultra-Low-Power 8-Bit MCU | ST
STM8L151K4T3

STM8L151K4T3 - 16MHz 16KB Ultra-Low-Power 8-Bit MCU | ST

The STMicroelectronics STM8L151K4T3 is an ultra-low-power 8-bit microcontroller operating at up to 16 MHz, with 16 KB of Flash memory and a 32-pin LQFP 7 x 7 mm package. It belongs to the medium-density STM8L ultra-low-power family, combining low-power operation with embedded control peripherals in a compact surface-mount package. A microcontroller is a programmable semiconductor that integrates a CPU, Flash program memory, data memory, timers, communication interfaces, and GPIO into one device. The STM8L family is designed for embedded systems where energy efficiency, deterministic peripheral access, and low standby current are more important than the processing power associated with 32-bit microcontrollers. The STM8L151K4T3 is therefore a microcontroller rather than a general-purpose processor. The device provides 16 KB of Flash memory, up to 16 MHz clocking, and 1 KB of data EEPROM according to the STM8L151 datasheet. Its peripheral set includes real-time clock, timer, LCD, and low-power functions. These characteristics support compact battery-operated products, industrial controllers, measurement equipment, and user-interface systems in which one MCU must combine control logic, display handling, and periodic sensing. The STM8 architecture provides an 8-bit execution model and a compact peripheral set intended for low-cost, low-power control. Ultra-low-power modes allow the MCU to spend substantial operating time in reduced-energy states between sensor readings or user interactions. Design decisions should account for the relationship between active-mode clocking, peripheral activity, and the selected regulator configuration rather than treating the 16 MHz maximum frequency as a continuous-power figure. Typical uses include low-energy sensor nodes, battery-powered meters, industrial control panels, programmable timers, LCD-driven instruments, and compact consumer appliances. In an LCD instrument, the integrated display-related resources can reduce the need for external display-control circuitry. In a battery-powered sensor, low-power operating modes can extend service intervals by reducing the amount of time the processor and peripherals remain active. When designing the PCB, provide the supply and decoupling connections specified in the STMicroelectronics application guidance, keep high-current and sensitive signal paths separated, and verify external component ratings against the selected I/O and supply conditions. Firmware should also use the low-power routines and peripheral configuration sequence described in the device reference documentation rather than assuming a generic 8-bit MCU startup model. This product page organizes the STM8L151K4T3 specifications, qualified same-package alternatives, application guidance, and design notes into a concise engineering reference. It supports initial device selection while directing detailed electrical-limit, pin, and firmware decisions to the manufacturer documentation.

RFQ İletişim
STM8L151K4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K4T6

STM8L151K4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151K4T6 is an ultra-low-power 8-bit STM8L microcontroller rated up to 16 MHz, with 16 KB of Flash memory, 2 KB of RAM and 1 KB of data EEPROM in a 32-pin LQFP (7x7) package. The device combines an STM8 8-bit CPU with low-power operation, analog conversion, timers, RTC capability, LCD support, and serial peripherals, making it suitable for compact embedded systems that must balance processing capability, low standby demand and board area. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while retaining the processing, sensing and communication functions needed for embedded products. The STM8L151 belongs to the STM8L hierarchy of low-power 8-bit MCUs, with the STM8L151K4 family positioned between simpler low-cost STM8 devices and higher-density members with larger memory capacities. Its analog and timing resources allow the MCU to supervise sensors, operate human-interface controls and manage low-speed communications without requiring several discrete components. Key features include 16 KB Flash, 2 KB RAM, 1 KB EEPROM and a maximum 16 MHz clock. Integrated resources include an ADC, DAC, comparators, timers, USART, I2C and SPI interfaces, plus RTC and LCD-related capabilities identified for the STM8L151 family. These peripherals reduce external component count in battery-operated instruments, small industrial controls, sensor nodes and compact consumer equipment. The STM8L architecture is based on an 8-bit CISC-style core and provides an economical platform for control-oriented firmware. Its combination of EEPROM, RTC capability, analog peripherals and multiple communication interfaces allows designers to retain calibration data, acquire analog inputs, produce an analog output and exchange data with external sensors or actuators from one controller. The 32-LQFP package also exposes enough I/O for keypad scanning, display control and peripheral connections in space-constrained designs. Typical applications include battery-powered measurement instruments, compact energy meters, industrial sensor interfaces, LCD-based control panels, environmental monitoring, portable accessories and low-power building-control nodes. Its serial interfaces support sensors and external transceivers, while the timers and comparators simplify periodic sampling, edge detection and threshold-based control tasks. The principal design consideration is the operating-voltage envelope. Distributor data identifies 2.5 V and 3.3 V supply use, while an operating-power-supply indication of 3.6 V also appears in available material; designers must resolve the exact minimum and maximum limits against the manufacturer datasheet for the selected voltage variant before final schematic release. External bypass capacitors, oscillator requirements and unused-pin handling should follow ST's reference guidance. This page consolidates verified manufacturer and distributor information, same-package alternatives, parameter comparisons and practical selection guidance. It adds engineering context around memory, interfaces, analog functions and supply constraints while clearly identifying specifications that still require confirmation from the manufacturer datasheet.

RFQ İletişim
STM8L151K4T6TR - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)
STM8L151K4T6TR

STM8L151K4T6TR - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM8L151K4T6TR is an ultra-low-power 8-bit STM8L microcontroller rated up to 16 MHz, with 16 KB of Flash memory, 2 KB of RAM and 1 KB of data EEPROM in a 32-pin LQFP (7x7) package. The device combines an STM8 8-bit CPU with low-power operation, analog conversion, timers, RTC capability, LCD support, and serial peripherals, making it suitable for compact embedded systems that must balance processing capability, low standby demand and board area. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while retaining the processing, sensing and communication functions needed for embedded products. The STM8L151 belongs to the STM8L hierarchy of low-power 8-bit MCUs, with the STM8L151K4 family positioned between simpler low-cost STM8 devices and higher-density members with larger memory capacities. Its analog and timing resources allow the MCU to supervise sensors, operate human-interface controls and manage low-speed communications without requiring several discrete components. Key features include 16 KB Flash, 2 KB RAM, 1 KB EEPROM and a maximum 16 MHz clock. Integrated resources include an ADC, DAC, comparators, timers, USART, I2C and SPI interfaces, plus RTC and LCD-related capabilities identified for the STM8L151 family. These peripherals reduce external component count in battery-operated instruments, small industrial controls, sensor nodes and compact consumer equipment. The STM8L architecture is based on an 8-bit CISC-style core and provides an economical platform for control-oriented firmware. Its combination of EEPROM, RTC capability, analog peripherals and multiple communication interfaces allows designers to retain calibration data, acquire analog inputs, produce an analog output and exchange data with external sensors or actuators from one controller. The 32-LQFP package also exposes enough I/O for keypad scanning, display control and peripheral connections in space-constrained designs. Typical applications include battery-powered measurement instruments, compact energy meters, industrial sensor interfaces, LCD-based control panels, environmental monitoring, portable accessories and low-power building-control nodes. Its serial interfaces support sensors and external transceivers, while the timers and comparators simplify periodic sampling, edge detection and threshold-based control tasks. The principal design consideration is the operating-voltage envelope. Distributor data identifies 2.5 V and 3.3 V supply use, while an operating-power-supply indication of 3.6 V also appears in available material; designers must resolve the exact minimum and maximum limits against the manufacturer datasheet for the selected voltage variant before final schematic release. External bypass capacitors, oscillator requirements and unused-pin handling should follow ST's reference guidance. This page consolidates verified manufacturer and distributor information, same-package alternatives, parameter comparisons and practical selection guidance. It adds engineering context around memory, interfaces, analog functions and supply constraints while clearly identifying specifications that still require confirmation from the manufacturer datasheet.

RFQ İletişim
STM8L151K4U6 - 16MHz 16KB Flash 8-Bit MCU | STMicroelectronics
STM8L151K4U6

STM8L151K4U6 - 16MHz 16KB Flash 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8L151K4U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz clock, 16 KB of Flash program memory, 41 I/O ports, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. It operates from a 1.8 V to 3.6 V supply and belongs to the medium-density STM8L151x4/6 family. The STM8L151K4U6 combines an 8-bit CPU, embedded Flash, data EEPROM, real-time clock capability, LCD support, timers, communication peripherals, analog conversion, and low-power operating modes in a compact surface-mount package. An ultra-low-power microcontroller is an integrated circuit optimized to complete control tasks while consuming as little energy as possible during active operation, sleep, and deeper low-power states. This makes the STM8L architecture useful for battery-powered sensors, compact industrial controls, connected measurement equipment, and consumer products that must operate for long periods without continuous external power. The STM8L family belongs to the broader hierarchy of 8-bit microcontroller, embedded controller, processor, and semiconductor product categories. The STM8L151K4U6 combines 16 KB Flash with a maximum 16 MHz system clock in a 5 mm by 5 mm UFQFPN package. Its listed peripherals include timers, USART, I2C, SPI, ADC, DAC, comparators, an RTC, and 1 KB data EEPROM. The integrated LCD capability supports segment-based human-interface designs, while the ADC and comparators allow the device to process analog sensor signals without requiring separate interface components. Its 41 I/O ports provide substantial interface flexibility within a compact footprint. The STM8L151x4/6 product family is structured around an 8-bit embedded-control architecture designed for energy-efficient operation. Its combination of serial interfaces supports connections to displays, sensors, transceivers, data converters, and other embedded peripherals. The timer and real-time-clock functions enable periodic measurement, event timing, and low-duty-cycle acquisition, while the analog peripherals support thresholding, signal conditioning, and monitoring functions. Typical applications include battery-operated environmental sensors, compact industrial monitoring modules, low-power data loggers, LCD-driven meters, wearable accessories, appliance control boards, and connected industrial nodes. The device is particularly suitable when a compact 8-bit controller, moderate Flash capacity, and multiple communication interfaces are more appropriate than a higher-cost application processor. Its low operating-voltage range also supports energy harvesting and coin-cell powered designs when the external sensor load permits. Designers should verify the exact pin functions, exposed-pad connection, decoupling requirements, clock configuration, and low-power state transitions in the manufacturer datasheet before layout release. Keep the power and ground connections compact, route sensitive analog inputs away from fast digital signals, and confirm that firmware drivers match the selected package and peripheral set. The UFQFPN body is compact but its fine-pitch footprint still requires controlled solder mask, paste, and assembly processes. This product summary combines the manufacturer family description with distributor specification, package, lifecycle, and interface information. It also organizes drop-in alternatives, application guidance, and engineering considerations so engineers can assess the STM8L151K4U6 against the same-package STM8L family options without relying on a single distributor listing.

RFQ İletişim
STM8L151K6T3 - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics
STM8L151K6T3

STM8L151K6T3 - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K6T3 is an 8-bit ultra-low-power STM8L EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, 1 KB data EEPROM, and a 32-LQFP 7 x 7 mm package. It is designed for energy-sensitive embedded control applications that require low-power operation, compact integration, and embedded peripherals. The device operates from 1.8 V to 3.6 V and is available in the -40°C to +85°C temperature range. Its 41 I/O ports provide substantial external connectivity for sensors, human-interface equipment, and compact control systems. An ultra-low-power 8-bit microcontroller is a category of embedded semiconductor intended to minimize energy consumption while executing control tasks. Within the broader hierarchy, the STM8L151K6T3 belongs to the STM8L family, STM8 8-bit microcontrollers, and the microcontroller product class. Its EnergyLite architecture is relevant to battery-operated instruments, low-power sensors, meters, and portable equipment where duty-cycled sleep operation can extend operating time between battery replacements or maintenance visits. The STM8L151K6T3 provides 32 KB of Flash for firmware, 1 KB of data EEPROM for retained parameters, and a maximum clock frequency of 16 MHz. Its 41 I/O ports support external interfacing, while integrated 12-bit ADC and timer resources reduce the need for separate components. The 1.8 V to 3.6 V operating range accommodates common 2.5 V and 3.3 V system rails. The 32-LQFP package measures 7 x 7 mm and supports surface-mount manufacturing. The STM8L151K6T3 is positioned between simple 8-bit controllers and more complex 32-bit microcontrollers. It provides the direct addressing and compact peripheral set associated with the STM8 family while retaining a 16 MHz operating clock. The 32 KB Flash capacity supports more structured firmware than the smallest STM8 devices, and the inclusion of EEPROM and an ADC makes the part suitable for self-contained measurement and control nodes without extensive external circuitry. Typical applications include compact industrial control modules, battery-powered environmental sensors, electronic utility meters, compact keypads, and low-power human-interface devices. In a sensing product, the MCU can acquire analog measurements through its 12-bit ADC, apply control logic, and manage a low-duty-cycle operating profile. The 41 available I/O ports also make it practical to connect multiple digital inputs, displays, indicators, or communication interfaces. Designers should review the complete manufacturer datasheet for the exact pin assignments, peripheral multiplexing, oscillator options, and low-power modes before laying out the PCB. Particular attention should be paid to supply decoupling, analog-input routing, unused I/O handling, and the configuration of pins shared by multiple peripherals. These details are essential for reliable low-power operation and avoiding conflicts between LCD, timer, ADC, and communication functions. This page consolidates the verified manufacturer, distributor, and cross-reference information for the STM8L151K6T3, then adds application guidance, parameter comparisons, procurement context, and drop-in replacement analysis. It is intended to help engineers identify whether the 32 KB, 16 MHz, 8-bit configuration matches their PCB and firmware requirements before committing to a design.

RFQ İletişim
STM8L151K6T6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8L151K6T6

STM8L151K6T6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8L151K6T6 is an ultra-low-power 8-bit EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, 2 KB RAM and a 32-pin LQFP 7 x 7 mm package. It operates from 1.8 V to 3.6 V according to the available specification data. The device belongs to the medium-density STM8L151x4/6 family, combining an economical 8-bit architecture with low-power-oriented embedded features for compact control systems. An 8-bit microcontroller is a microprocessor core integrated with Flash memory, RAM, timers, serial interfaces, GPIO and other peripherals on one semiconductor package. The STM8L family sits within the broader embedded-controller hierarchy: MCU → microcontroller → embedded processing IC → semiconductor. Its low-power positioning makes it useful where the system must continue monitoring or controlling sensors while limiting energy consumption between active operations. The verified feature set includes 16 MHz maximum clock speed, 32 KB of Flash organized as 32K x 8, 2 KB RAM, an 8-bit instruction set and a 32-pin LQFP package. One indexed source lists 41 I/O ports, although the exact pin names and exposed functions were not included in the supplied data. The LQFP-32 package provides a conventional surface-mount footprint with accessible leads, making the MCU suitable for compact control boards assembled with standard pick-and-place and reflow processes. The STM8L151x4/6 architecture is designed for embedded control rather than high-compute workloads. Its Flash memory supports firmware storage, while the 2 KB SRAM provides working memory for control logic, state variables and peripheral buffers. Operating at up to 16 MHz provides sufficient processing bandwidth for digital control, sensor aggregation, human-interface input, communication tasks and supervisory functions without requiring a higher-complexity MCU. Typical uses include low-power sensor controllers, compact industrial control modules, battery-operated instruments, LCD-oriented control panels, access-control terminals and small automation nodes. The 1.8 V minimum operating voltage supports low-energy system architectures, while the 3.6 V maximum accommodates conventional 3.3 V equipment when the designer applies suitable decoupling and verifies absolute maximum limits. Designers should preserve the STM8L151x4/6 power and peripheral configuration during firmware bring-up, including clock initialization, flash programming, GPIO assignment and low-power mode transitions. Component availability, complete electrical characteristics and exact pin functions should be confirmed against the current STMicroelectronics datasheet before a production layout is released. This product record combines verified distributor specifications, an official manufacturer resource, comparison data and engineering-oriented application guidance. It also distinguishes genuine package-compatible options from broader functional alternatives, helping procurement and design teams evaluate replacement risk without relying on part-name similarity alone.

RFQ İletişim
STM8L151K6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151K6U3

STM8L151K6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K6U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 32 KB Flash memory, and a 32-pin 5 mm × 5 mm UFQFPN package. The verified distributor listing identifies the device as an STM8L EnergyLite MCU with 32 KB Flash, while the manufacturer positions the STM8L151K6 family as part of the STM8L ultra-low-power 8-bit portfolio. It combines an 8-bit CPU with embedded analog and serial peripherals for compact control, sensing, communications, and low-duty-cycle embedded products. An ultra-low-power microcontroller is an embedded semiconductor designed to complete control tasks while minimizing energy consumption between active processing intervals. In the system hierarchy, the STM8L151K6U3 belongs to the microcontroller class, within embedded processors and power-conscious embedded control. Its combination of Flash program memory, data EEPROM, real-time-clock capability, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators allows one device to consolidate several discrete functions on a small PCB. Verified feature information identifies up to 32 KB Flash, 1 KB data EEPROM, RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. The distributor record also confirms 8-bit operation, a 16 MHz maximum frequency, and 32 KB organized as 32K × 8. These resources suit firmware that includes user-interface updates, sensor acquisition, local data logging, communication, timekeeping, and low-power state management without requiring a separate real-time clock or interface-conversion circuitry. The STM8L151K6U3 belongs to STMicroelectronics' STM8L low-power architecture rather than the ARM-based STM32 families. That distinction matters when replacing it: software, instruction set, peripheral implementation, and toolchain assumptions may differ even when another microcontroller offers similar nominal features. ST's product page identifies the medium-density STM8L151x4/6 devices, allowing engineers to distinguish the target from lower-density STM8L151x2/3 parts when planning a redesign. Typical applications include battery-powered utility meters, compact environmental sensors, industrial control modules, wearable accessories, instrument panels, and connected sensor nodes. The target's integrated ADC and comparators suit local analog monitoring, while USART, I2C, and SPI support external sensors, transceivers, displays, and data loggers. The RTC is useful for time-stamped measurements and scheduled low-power operation, although exact current, voltage, timer, ADC, and package-registration details must be taken from the manufacturer documentation. PCB implementation should follow the exact 32-pin UFQFPN land pattern and exposed-pad requirements in the manufacturer package information. Place decoupling capacitors close to supply pins, route sensitive analog inputs away from fast-switching nodes, and confirm thermal-pad soldering against the assembly process. Firmware and peripheral configuration should also use STMicroelectronics' STM8 toolchain rather than assuming STM32 compatibility. This product record combines verified manufacturer positioning, distributor specifications, sourcing links, interface coverage, and replacement-risk guidance. It is intended to accelerate engineering evaluation while clearly separating confirmed facts from parameters that still require confirmation from the official datasheet.

RFQ İletişim
STM8L151K6U6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8L151K6U6

STM8L151K6U6 - 16MHz 32KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8L151K6U6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller operating up to 16 MHz, with 32 KB of Flash memory and a 32-pin UFQFPN package measuring 5 x 5 mm. The device combines a CISC processor core, LCD support, real-time-clock capability and 1 KB of data EEPROM in an energy-conscious platform for embedded control. An ultra-low-power microcontroller is an integrated semiconductor that combines a processor core, memory and peripherals while prioritizing low current consumption during active operation and sleep. The STM8L family belongs to the STM8 8-bit microcontroller hierarchy and addresses battery-powered instruments, compact sensors and low-power industrial products where energy efficiency and a compact footprint are more important than high arithmetic throughput. Verified listing data identifies up to 32 KB of programmable Flash, 16 MHz maximum clock speed, 41 I/O ports, LCD support and a real-time clock. The STM8L151K6U6 also includes 1 KB of data EEPROM, allowing calibration values, configuration data and operating counters to be retained without consuming Flash. Its 1.8 V to 3.6 V supply range supports both 2 V and 3.3 V system architectures. The STM8L architecture provides a direct CISC execution model and a broad set of embedded peripherals rather than an Arm Cortex application processor. Verified distributor information identifies the MCU as an 8-bit device with 16 MHz performance and 32 KB of Flash. The K6U6 designation corresponds to a 32-pin UFQFPN configuration, with an exposed thermal and electrical connection area supporting heat transfer and PCB integration. Typical uses include low-energy sensor nodes, compact LCD instruments, portable measurement products, battery-operated controls and embedded industrial modules. The LCD interface and real-time clock are particularly useful in metering and user-interface designs, while the 41 I/O ports provide connections for sensors, switches, displays and communication peripherals in a small 5 x 5 mm package. Designers should review the complete pin assignment and exposed-pad requirements in the manufacturer datasheet before layout because the supplied verification data does not publish a complete numbered pin table. Decoupling, exposed-pad grounding, programming access and low-power configuration also require board-level validation against the official device documentation. This page consolidates verified manufacturer and distributor information, transparent sourcing limitations, package guidance and engineering-focused comparisons for the STM8L151K6U6. It distinguishes directly comparable STM8L variants from devices that require package or firmware changes and helps procurement teams evaluate the exact 32 KB, 32-pin ordering code.

RFQ İletişim
STM8L151K6U6TR - 16MHz 32KB 8-Bit MCU | STMicroelectronics (Tape & Reel)
STM8L151K6U6TR

STM8L151K6U6TR - 16MHz 32KB 8-Bit MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8L151K6U6TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller operating up to 16 MHz, with 32 KB of Flash memory and a 32-pin UFQFPN package measuring 5 x 5 mm. The device combines a CISC processor core, LCD support, real-time-clock capability and 1 KB of data EEPROM in an energy-conscious platform for embedded control. An ultra-low-power microcontroller is an integrated semiconductor that combines a processor core, memory and peripherals while prioritizing low current consumption during active operation and sleep. The STM8L family belongs to the STM8 8-bit microcontroller hierarchy and addresses battery-powered instruments, compact sensors and low-power industrial products where energy efficiency and a compact footprint are more important than high arithmetic throughput. Verified listing data identifies up to 32 KB of programmable Flash, 16 MHz maximum clock speed, 41 I/O ports, LCD support and a real-time clock. The STM8L151K6U6TR also includes 1 KB of data EEPROM, allowing calibration values, configuration data and operating counters to be retained without consuming Flash. Its 1.8 V to 3.6 V supply range supports both 2 V and 3.3 V system architectures. The STM8L architecture provides a direct CISC execution model and a broad set of embedded peripherals rather than an Arm Cortex application processor. Verified distributor information identifies the MCU as an 8-bit device with 16 MHz performance and 32 KB of Flash. The K6U6 designation corresponds to a 32-pin UFQFPN configuration, with an exposed thermal and electrical connection area supporting heat transfer and PCB integration. Typical uses include low-energy sensor nodes, compact LCD instruments, portable measurement products, battery-operated controls and embedded industrial modules. The LCD interface and real-time clock are particularly useful in metering and user-interface designs, while the 41 I/O ports provide connections for sensors, switches, displays and communication peripherals in a small 5 x 5 mm package. Designers should review the complete pin assignment and exposed-pad requirements in the manufacturer datasheet before layout because the supplied verification data does not publish a complete numbered pin table. Decoupling, exposed-pad grounding, programming access and low-power configuration also require board-level validation against the official device documentation. This page consolidates verified manufacturer and distributor information, transparent sourcing limitations, package guidance and engineering-focused comparisons for the STM8L151K6U6TR. It distinguishes directly comparable STM8L variants from devices that require package or firmware changes and helps procurement teams evaluate the exact 32 KB, 32-pin ordering code.

RFQ İletişim
STM8L151M8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151M8T6

STM8L151M8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151M8T6 is an 8-bit ultra-low-power microcontroller with a 16 MHz maximum clock, 64 KB of embedded Flash memory, and an 80-pin LQFP package measuring 14 x 14 mm. The STM8L151M8T6 supports 1.8 V, 2.5 V, and 3.3 V supply operation, making it suitable for battery-powered, industrial, and low-energy embedded systems. An ultra-low-power microcontroller is an energy-optimized embedded controller designed to maintain useful processing capability while minimizing current consumption during active operation, idle states, and low-power modes. The STM8L15xx family provides an 8-bit STM8 architecture, integrated low-power peripherals, and options for LCD-oriented designs, making it practical for compact control panels, portable instruments, metering equipment, and sensor nodes. Principal features of the STM8L151M8T6 include its 16 MHz enhanced STM8 CPU core, 64 KB Flash program memory, and support for three principal supply levels. The device is packaged in an 80-terminal LQFP for surface-mount assembly and is identified as an industrial-temperature-grade component. Its high-pin-count package also provides substantial I/O capacity for segmented displays, analog measurement channels, serial interfaces, and external sensing elements. The STM8L151M8T6 belongs to a family of ultra-low-power devices with a common software and peripheral architecture. According to the STMicroelectronics STM8L151x6/8 family datasheet, the STM8L151x6/8 devices provide fully pin-to-pin, software, and feature compatibility with the STM8L152x6/8 and STM8L162x8 lines. This shared architecture allows application software and board-level pin planning to be reused across several STM8L variants. Typical applications include battery-operated measurement instruments, compact HMI panels with LCD and key-scan functions, industrial sensor controllers, low-power communication nodes, and embedded access-control equipment. The STM8L151M8T6 is particularly suitable when designers need more GPIO and memory than smaller STM8L packages provide while retaining the low-power characteristics of the 8-bit family. When designing a PCB around the STM8L151M8T6, follow the pin-definition and package-outline drawings in the manufacturer datasheet rather than inferring connections from another STM8L part. Confirm that the selected crystal, LCD segment routing, analog input ranges, and decoupling network match the selected operating mode and supply voltage. This page combines manufacturer family documentation, distributor listing data, drop-in package comparisons, and practical design guidance to support component selection, schematic planning, and sourcing. It also identifies the principal memory, package, voltage, and low-power differences that matter when comparing the STM8L151M8T6 with related STM8L devices.

RFQ İletişim
STM8L151R6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151R6T6

STM8L151R6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151R6T6 is an 8-bit ultra-low-power microcontroller with a 16 MHz clock, 32 KB of Flash program memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It is designed for compact embedded systems that require low power consumption, efficient peripheral integration, and a broad supply-voltage range of 1.8 V to 3.6 V. An ultra-low-power microcontroller is a semiconductor device optimized to complete sensing, control, communication, and monitoring tasks while minimizing energy use during both active and standby operation. Within the device hierarchy, the STM8L151R6T6 belongs to the STM8L family, combines an 8-bit STM8 CPU core with embedded Flash memory, and provides a dedicated platform for low-power embedded control rather than high-performance computing. The device provides 32 KB of Flash memory, 16 MHz maximum clock speed, and 41 I/O ports according to its product data. Its operating voltage extends from 1.8 V to 3.6 V, allowing use in battery-powered products, portable instruments, industrial controls, and consumer equipment. The LCD-related designation identifies its suitability for applications involving display interfaces, while its 64-LQFP package exposes a substantial number of pins for external sensors, actuators, communication interfaces, and mixed-signal connections. Because this is an 8-bit MCU, its computational resources are best suited to control logic, state machines, data acquisition, display handling, and communication rather than intensive graphics, high-bandwidth signal processing, or large operating systems. The 16 MHz clock supports deterministic peripheral timing and responsive application code, while Flash memory provides enough space for embedded firmware and application routines. Typical applications include low-power sensor nodes, compact industrial monitoring equipment, battery-operated meters, portable measurement products, display-equipped control panels, and compact consumer appliances. The combination of low-power operation, 32 KB Flash memory, and 41 I/O ports supports designs that need flexible external connectivity without requiring a large microcontroller package. Board design should follow the manufacturer pinout and pin-description tables exactly. Pay particular attention to supply decoupling, unused-pin treatment, programming access, oscillator requirements, and exposed-pad or thermal-layout guidance applicable to the selected LQFP variant. Confirm the complete electrical limits and peripheral configuration in the manufacturer datasheet before releasing a production schematic. This page organizes the verified electrical identity, lifecycle status, package data, and source links for STM8L151R6T6 while adding application-oriented design guidance, sourcing questions, and same-family replacement analysis. These engineering aids help buyers distinguish configuration and temperature-range changes before approving a substitution.

RFQ İletişim
STM8L151R6T6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)
STM8L151R6T6TR

STM8L151R6T6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM8L151R6T6TR is an 8-bit ultra-low-power microcontroller with a 16 MHz clock, 32 KB of Flash program memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It is designed for compact embedded systems that require low power consumption, efficient peripheral integration, and a broad supply-voltage range of 1.8 V to 3.6 V. An ultra-low-power microcontroller is a semiconductor device optimized to complete sensing, control, communication, and monitoring tasks while minimizing energy use during both active and standby operation. Within the device hierarchy, the STM8L151R6T6TR belongs to the STM8L family, combines an 8-bit STM8 CPU core with embedded Flash memory, and provides a dedicated platform for low-power embedded control rather than high-performance computing. The device provides 32 KB of Flash memory, 16 MHz maximum clock speed, and 41 I/O ports according to its product data. Its operating voltage extends from 1.8 V to 3.6 V, allowing use in battery-powered products, portable instruments, industrial controls, and consumer equipment. The LCD-related designation identifies its suitability for applications involving display interfaces, while its 64-LQFP package exposes a substantial number of pins for external sensors, actuators, communication interfaces, and mixed-signal connections. Because this is an 8-bit MCU, its computational resources are best suited to control logic, state machines, data acquisition, display handling, and communication rather than intensive graphics, high-bandwidth signal processing, or large operating systems. The 16 MHz clock supports deterministic peripheral timing and responsive application code, while Flash memory provides enough space for embedded firmware and application routines. Typical applications include low-power sensor nodes, compact industrial monitoring equipment, battery-operated meters, portable measurement products, display-equipped control panels, and compact consumer appliances. The combination of low-power operation, 32 KB Flash memory, and 41 I/O ports supports designs that need flexible external connectivity without requiring a large microcontroller package. Board design should follow the manufacturer pinout and pin-description tables exactly. Pay particular attention to supply decoupling, unused-pin treatment, programming access, oscillator requirements, and exposed-pad or thermal-layout guidance applicable to the selected LQFP variant. Confirm the complete electrical limits and peripheral configuration in the manufacturer datasheet before releasing a production schematic. This page organizes the verified electrical identity, lifecycle status, package data, and source links for STM8L151R6T6TR while adding application-oriented design guidance, sourcing questions, and same-family replacement analysis. These engineering aids help buyers distinguish configuration and temperature-range changes before approving a substitution.

RFQ İletişim
STM8L151R8T3 - 16MHz 64KB MCU | STMicroelectronics
STM8L151R8T3

STM8L151R8T3 - 16MHz 64KB MCU | STMicroelectronics

The STMicroelectronics STM8L151R8T3 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz CPU, 64 KB of embedded Flash memory, integrated EEPROM, and a 64-pin LQFP package measuring 10 mm by 10 mm. It operates from 1.8 V to 3.6 V and combines low-power sensing and control capabilities with a 12-bit ADC and up to 54 I/O ports. An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption while executing embedded control, measurement, communications, and interface tasks. The STM8L15xx family belongs to the STM8L EnergyLite architecture and is designed for battery-operated sensors, compact industrial controls, portable instruments, and connected products that must retain processing capability while spending little time in active or standby modes. The STM8L151R8T3 combines a maximum 16 MHz enhanced STM8 CPU core with 64 KB Flash and 4 KB EEPROM. Its 12-bit ADC supports embedded analog measurement, while the high I/O count allows multiple digital inputs, outputs, communications interfaces, and external peripheral connections. The 1.8 V to 3.6 V operating range accommodates low-voltage sensor, metering, industrial, and consumer equipment. The LQFP-64 package provides 54 I/O positions and a 10 mm by 10 mm body, making it practical for prototype boards and multiline industrial-control products. Its performance profile is suited to real-time control loops that do not require a 32-bit Cortex-M core but benefit from fast 8-bit execution, embedded nonvolatile data storage, and a broad set of GPIO resources. Integrated EEPROM can retain configuration and calibration values without occupying external Flash space. Typical uses include low-energy environmental monitoring, compact motor and actuator controllers, industrial sensor nodes, portable measurement instruments, access-control equipment, and low-power data-acquisition systems. In each case, the device can combine analog sensing and control logic in a single package while supporting multiple digital interfaces and serial communications. PCB design should preserve clean supply distribution, short analog-signal paths, and stable grounding around the ADC inputs. Place decoupling capacitors close to the supply pins, route high-current or switching signals away from sensitive analog traces, and consult the STM8L151R8 pin and package documentation before assigning every LQFP position. Verify the required clock, reset, programming, and peripheral functions against the device pin table. This product page combines manufacturer and distributor specifications, practical application guidance, verified lifecycle information, and engineering-focused selection criteria. It also distinguishes exact ordering information from broader series-level claims so that engineers can assess the STM8L151R8T3 for low-power embedded designs without relying on a simple catalog summary.

RFQ İletişim
STM8L151R8T6 - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics
STM8L151R8T6

STM8L151R8T6 - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics

The STMicroelectronics STM8L151R8T6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz maximum core frequency, 64 KB of Flash program memory and 4 KB of RAM, housed in a 64-LQFP 10 x 10 mm package. It operates across a 1.8 V, 2.5 V or 3.3 V supply range and is designed for battery-operated, sensor-driven and connected embedded products. STM8L microcontrollers belong to the 8-bit microcontroller and energy-management MCU hierarchy, combining an enhanced STM8 CPU core with low-power operating modes, LCD-oriented peripherals and integrated analog resources. Their role in a system is to execute local control and measurement functions while keeping current consumption low enough for long operating life from a compact energy source. Key characteristics include 64 KB of embedded Flash, 4 KB of SRAM, a maximum clock frequency of 16 MHz and a 64-LQFP package. The STM8L151R8 family is positioned for applications requiring a balance of processing capability, low standby consumption and compact package size. The provided manufacturer and distributor references identify the device as part of the STM8L151x6/8 ultra-low-power family, which also includes STM8L152 and STM8L162 variants. The STM8L151R8T6 is suitable for energy-harvesting meters, industrial sensor nodes, wearable accessories, low-power control panels and small portable instruments. Because the device supports low-voltage operation and an LCD-oriented feature set, it can reduce the need for external components in display-driven designs. Its 64-LQFP outline also provides more I/O than the smaller STM8L151K6 package for designs requiring multiple external connections. When designing around this MCU, verify the exact operating voltage, pin multiplexing, clock configuration and low-power mode entry procedure against the STM8L151x6/8 datasheet. The STM8L151R8T6 is supplied in a tray-oriented ordering code, while STM8L151R8T6TR is the tape-and-reel ordering variant shown in distributor listings. The distinction between ordering formats is commercial rather than a change in the underlying device. This page combines verified manufacturer and distributor information with practical package, sourcing and design guidance. It also highlights the limits of the available data: detailed pin names, electrical timing curves, lifecycle declarations and volume pricing must be confirmed from the current manufacturer datasheet and authorized distributor inventory before a production release.

RFQ İletişim
STM8L151R8T6TR - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics (Tape & Reel)
STM8L151R8T6TR

STM8L151R8T6TR - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8L151R8T6TR is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz maximum core frequency, 64 KB of Flash program memory and 4 KB of RAM, housed in a 64-LQFP 10 x 10 mm package. It operates across a 1.8 V, 2.5 V or 3.3 V supply range and is designed for battery-operated, sensor-driven and connected embedded products. STM8L microcontrollers belong to the 8-bit microcontroller and energy-management MCU hierarchy, combining an enhanced STM8 CPU core with low-power operating modes, LCD-oriented peripherals and integrated analog resources. Their role in a system is to execute local control and measurement functions while keeping current consumption low enough for long operating life from a compact energy source. Key characteristics include 64 KB of embedded Flash, 4 KB of SRAM, a maximum clock frequency of 16 MHz and a 64-LQFP package. The STM8L151R8 family is positioned for applications requiring a balance of processing capability, low standby consumption and compact package size. The provided manufacturer and distributor references identify the device as part of the STM8L151x6/8 ultra-low-power family, which also includes STM8L152 and STM8L162 variants. The STM8L151R8T6TR is suitable for energy-harvesting meters, industrial sensor nodes, wearable accessories, low-power control panels and small portable instruments. Because the device supports low-voltage operation and an LCD-oriented feature set, it can reduce the need for external components in display-driven designs. Its 64-LQFP outline also provides more I/O than the smaller STM8L151K6 package for designs requiring multiple external connections. When designing around this MCU, verify the exact operating voltage, pin multiplexing, clock configuration and low-power mode entry procedure against the STM8L151x6/8 datasheet. The STM8L151R8T6TR is supplied in a tray-oriented ordering code, while STM8L151R8T6TRTR is the tape-and-reel ordering variant shown in distributor listings. The distinction between ordering formats is commercial rather than a change in the underlying device. This page combines verified manufacturer and distributor information with practical package, sourcing and design guidance. It also highlights the limits of the available data: detailed pin names, electrical timing curves, lifecycle declarations and volume pricing must be confirmed from the current manufacturer datasheet and authorized distributor inventory before a production release.

RFQ İletişim
STM8L152C4T3 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM8L152C4T3

STM8L152C4T3 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C4T3 is an ultra-low-power 8-bit microcontroller with a 16 MHz clock, 16 KB of Flash program memory, and a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 1.8 V to 3.6 V supply and provides 41 I/O ports, making it suitable for compact, low-power embedded systems that require substantial peripheral integration. An ultra-low-power microcontroller is an energy-efficient integrated circuit designed to conserve battery energy by combining low-leakage operation, low-power operating modes, and selective peripheral activation. The STM8L family belongs to the broader hierarchy of 8-bit MCU, microcontroller, embedded processor, and semiconductor products used in sensing, metering, control, communications, and human-interface applications. The STM8L152C4T3 combines 16 KB of Flash memory with an integrated real-time clock and LCD controller. Its documented peripheral set also includes timers, USART, I2C, SPI, ADC, DAC, and comparators. These resources allow a designer to implement local sensing, display control, data acquisition, serial communication, and actuator drive functions without relying on several separate discrete devices. Its 16 MHz operating clock provides dedicated processing performance for low-complexity control tasks, while the 41 available I/O ports support compact user interfaces and mixed analog and digital connections. The 1.8 V to 3.6 V operating range accommodates low-voltage battery-powered designs as well as 3.3 V industrial or embedded systems. Component selection should include checking the complete pin description and electrical limits in the manufacturer pinout and datasheet. Typical uses include battery-powered environmental sensors, compact energy meters, industrial control modules, instrument-panel controllers, low-power data loggers, and connected sensing nodes. The LCD controller and real-time clock are especially useful when the design requires a local display and timekeeping without continuously powering a larger processor or display subsystem. PCB design should preserve the required decoupling arrangement, connect unused pins according to the manufacturer guidance, and route high-impedance or sensitive analog signals away from fast-switching nodes. Low-power designs must also account for board leakage, pull-up resistance, and the operating mode selected by firmware, because external circuitry can dominate the final sleep-mode current. This page consolidates the exact orderable MPN, electrical attributes, package information, application guidance, and qualified same-family alternatives into one engineering reference. It also identifies the documentation needed to verify pin assignment, peripheral multiplexing, firmware support, and lifecycle status before a design is released to production.

RFQ İletişim
STM8L152C4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C4T6

STM8L152C4T6 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C4T6 is an ultra-low-power 8-bit Flash microcontroller with a 16 MHz maximum clock, 16 KB of embedded Flash memory, and a 48-pin LQFP package measuring 7 x 7 mm. The STM8L152C4T6 is a medium-density member of the STM8L151x4/6 and STM8L152x4/6 family, combining an energy-efficient 8-bit architecture with LCD support and a broad set of embedded peripherals. It is designed for compact, battery-powered products where low standby current, fast wake-up behavior, and a high pin count are important design priorities. An ultra-low-power microcontroller is a semiconductor that minimizes energy consumption during active operation, standby, and shutdown while retaining enough peripheral capability for embedded control. The STM8L family hierarchy places this device between general-purpose 8-bit Flash MCUs and highly integrated energy-harvesting and low-power control solutions. It belongs to the broader category of embedded microcontrollers, which execute firmware, read sensors, drive displays, and manage communications on a single integrated circuit. The STM8L152C4T6 provides 16 KB of Flash program memory and operates at up to 16 MHz. Its feature set includes an LCD interface, real-time clock capability, timers, USART, I2C, SPI, a 12-bit ADC, DAC, and comparators, as listed in the family datasheet description. These resources support connected sensing, compact human-interface panels, industrial controls, and measurement equipment. The 48-pin LQFP package also provides enough I/O for segment or matrix LCD drive signals alongside communications and discrete control outputs. The STM8L152C4T6 uses a dedicated 8-bit MCU architecture rather than an ARM Cortex core. This makes it suitable for straightforward control loops, protocol handling, and low-cost embedded products where deterministic peripheral access and low standby energy are more valuable than high-level 32-bit processing. Firmware can be organized around the integrated timers, serial interfaces, analog converters, and display controller without requiring a separate display driver IC. Typical applications include low-power metering equipment, battery-operated sensor nodes, compact industrial control panels, security and access-control terminals, and instruments with local LCD displays. The LCD controller, real-time clock, and low-power operating modes are especially useful when a device must present measured information while preserving standby energy. The 48-pin package also suits designs that need multiple I/O, analog inputs, or several peripheral connections on one board. Designers should confirm the exact pin multiplexing, power supply range, clock configuration, and peripheral assignments against the manufacturer datasheet before layout release. Decoupling requirements, LCD segment mapping, ADC reference strategy, and low-power mode entry conditions should be validated early because each can affect the final power budget and board density. The STM8L152C4T6 is normally supplied in an LQFP package for through-hole assembly compatibility and automated PCB placement. This page combines the verified manufacturer and distributor product details with package-specific engineering guidance, practical application fit, interface-selection questions, and honest comparisons against same-family STM8L devices. It helps engineers narrow the STM8L choice before committing to a schematic, PCB footprint, firmware configuration, or sourcing plan.

RFQ İletişim
STM8L152C4T6TR - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM8L152C4T6TR

STM8L152C4T6TR - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C4T6TR is an 8-bit ultra-low-power microcontroller with a 16 MHz core, 16 KB of Flash program memory, 2 KB of RAM, and a 48-LQFP 7 x 7 mm package. It belongs to the STM8L EnergyLite family and combines low-power operation with an integrated RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators. An ultra-low-power microcontroller is an embedded semiconductor designed to execute control and measurement tasks while minimizing energy consumption. The STM8L family hierarchy progresses from MCU to 8-bit microcontroller, ultra-low-power microcontroller, and embedded controller. This positioning makes the STM8L152C4T6TR useful in battery-operated instruments, compact industrial sensors, meter interfaces, and portable equipment where longer standby operation is more important than high computational throughput. The 16 MHz clock rate provides dedicated processing for protocol handling, timing, data acquisition, and supervisory control. Its 16 KB Flash supports firmware and boot logic, while 2 KB of SRAM accommodates working data and stack requirements. The device supports a 3 V operating supply according to distributor records, while the Arrow listing identifies a 2.5 V/3.3 V configuration. Peripheral integration reduces the need for external components for analog measurements, communications, comparisons, and low-power timekeeping. The STM8L152C4T6TR also includes two comparators sharing a bias and voltage reference, as described in the STMicroelectronics STM8L151x4/6 and STM8L152x4/6 datasheet. Its internal reference can be selected or overridden through an I/O. These features are useful for threshold detection, sensor conditioning, battery monitoring, and low-power control loops. The LCD interface and RTC are particularly valuable in metering systems that must retain time and present information while consuming minimal power. Typical uses include compact energy meters, industrial sensor nodes, wearable accessories, low-power instrument panels, security and access peripherals, and battery-powered remote controls. Designers should select capacitors and clock support components according to the manufacturer reference design, provide a stable supply across the operating range, and confirm that each peripheral is clocked and configured for the intended low-power mode. This page consolidates the exact orderable MPN, verified distributor records, manufacturer documentation, application guidance, and same-family replacement considerations. It also highlights where a different STM8L memory configuration or device variant can reuse the 48-LQFP footprint without assuming that every cross-device software and peripheral arrangement is interchangeable.

RFQ İletişim