Ürünler (21.000+)

W77E532A40PL - 40MHz 8051 128KB Flash MCU | Nuvoton
W77E532A40PL

W77E532A40PL - 40MHz 8051 128KB Flash MCU | Nuvoton

The Nuvoton Technology Corporation W77E532A40PL is a 40 MHz, 8-bit 8051-compatible microcontroller with 128KB of program Flash, 1KB of RAM, 36 general-purpose I/O pins, and a 44-pin PLCC package. It operates from a single 5 V supply and executes the standard 8051 instruction set in a four-cycle architecture. An 8051-compatible microcontroller is an embedded controller that retains the classic 8051 programming model and peripheral structure while using an internally redesigned processor core. The W77E532A belongs to the W77 family of enhanced 8051 devices, providing compatibility with 8052 software and the hardware resources expected from a standard 8052, including four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and interrupt sources. Key device characteristics include a 40 MHz operating speed, 128KB of Flash program memory, 1KB of internal RAM, and 36 I/O pins. The redesigned core removes wasted clock and memory cycles, allowing instructions to complete approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency. A 5 V supply and 44-pin J-lead PLCC package make the device suitable for established embedded control platforms rather than new high-density mixed-signal designs. The W77E532A architecture remains instruction-set and 8052 pin compatible while improving execution efficiency. Its 128KB Flash area provides substantially more program storage than many classical 8051 controllers, reducing the need for external program memory in larger control routines. Integrated timers support periodic timing, event counting, and modulation tasks, while the serial port handles low-speed communication with external controllers or data acquisition modules. Typical uses include industrial controllers, data acquisition equipment, communications interfaces, embedded instrumentation, and legacy 8051 system upgrades. The device can also serve as a bridge between an established 8051 software base and a newer PCB revision, provided the board footprint, supply rail, oscillator arrangement, and peripheral assignments match the original controller. When designing around the W77E532A40PL, confirm the 5 V supply tolerance, external crystal or clock connection, Flash programming method, and reset configuration against the manufacturer datasheet. Because the PLCC package is legacy-oriented, it is less convenient than an LQFP or QFP package for automated assembly, hand soldering, or compact consumer products. This page consolidates device specifications, package information, application guidance, and verified same-footprint alternatives into a practical engineering reference. It also highlights where an engineer must confirm pin mapping, timing, and supply requirements before treating a candidate as a functional replacement.

RFQ İletişim
W77I058A25DL - 25MHz 8051 MCU, 32KB Flash | Nuvoton
W77I058A25DL

W77I058A25DL - 25MHz 8051 MCU, 32KB Flash | Nuvoton

The Nuvoton Technology Corporation W77I058A25DL is an 8-bit W77 8051-compatible microcontroller operating at up to 25 MHz, with 32 KB of Flash program memory, 1 KB of RAM, and 32 I/O pins in a 40-pin DIP package. It operates from 3.3 V or 5 V, providing a practical platform for embedded control, data acquisition, instrument panels, and compact automation products. An 8051-compatible microcontroller is an embedded processing component that executes firmware from nonvolatile program memory while providing digital inputs, outputs, timers, serial interfaces, and interrupt-driven control functions. The W77 family combines the widely understood 8051 programming model with integrated Flash memory and modern peripheral integration, placing it within the hierarchy of embedded microcontroller, embedded processor, and semiconductor devices. The W77I058A25DL combines a 25 MHz operating frequency with 32 KB organized as 32K x 8 of Flash memory. Its 1K x 8 RAM provides 1,024 bytes of internal data memory, while 32 I/O pins give the design substantial direct digital connectivity. Operation from both 3.3 V and 5 V supports legacy 5 V control boards as well as lower-voltage systems when the surrounding circuitry is designed for the selected supply level. This part belongs to the W77I family of 8051-based devices. The in-circuit programming and Flash-based program storage support firmware updates and development workflows common to embedded control products. Its DIP format is particularly suitable for prototypes, educational platforms, repair assemblies, and industrial control boards assembled with through-hole sockets rather than compact surface-mount production processes. Typical applications include small industrial controllers, instrument interfaces, keypad and display controllers, programmable timers, laboratory equipment, building-control modules, and motor or relay-control systems. The 32 available I/O pins are useful for digital sensing and actuator signaling, while the 25 MHz clock rate provides a responsive platform for interrupt handling and sequential control loops. Designers should account for the available 1 KB RAM when sizing buffers, stacks, and working variables. Firmware should also include startup and brownout-handling provisions appropriate to the power-supply environment, and unused inputs should be terminated so that the 40-pin DIP implementation remains predictable in noisy industrial equipment. This product page combines the core W77I058A25DL specifications, package characteristics, engineering guidance, and a qualified drop-in comparison. It supports faster sourcing by separating verified device attributes from design assumptions and by identifying the memory and firmware considerations that matter most when replacing a 40-DIP 8051 controller.

RFQ İletişim
W77I058A25PL - 8-Bit 25MHz 32KB Flash MCU | Nuvoton
W77I058A25PL

W77I058A25PL - 8-Bit 25MHz 32KB Flash MCU | Nuvoton

The Nuvoton Technology Corporation W77I058A25PL is an 8-bit W77-series 8051-compatible microcontroller operating at up to 25 MHz, with 32 KB of flash program memory and a 44-pin PLCC package. It operates from 2.7 V to 5.5 V and is specified for temperatures from -40 °C to +85 °C. The device combines a four-cycle 80C51-class core with 1 KB of internal RAM and 36 I/O lines for compact embedded control designs. A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, I/O ports, and peripheral functions onto one device. The 8051-compatible instruction set belongs to the broader 8-bit embedded-controller family. Nuvoton's W77 series targets applications in which deterministic 8-bit control, integrated flash memory, and a broad operating-voltage range are more useful than the compute density or peripheral breadth of a 32-bit processor. The W77I058A25PL provides 32 KB of flash memory organized as 32K x 8, allowing firmware and constant data to be stored on the chip. Its internal data memory is 1K x 8 bytes, and 36 I/O pins provide connections for sensors, switches, displays, actuators, and communication interfaces. The four-cycle 80C51 execution architecture supports clock speeds up to 25 MHz while retaining a familiar programming model. Operation from 2.7 V to 5.5 V makes the device suitable for both 3.3 V and 5 V system environments. The specified -40 °C to +85 °C industrial temperature range supports equipment operating across extended ambient conditions. Its PLCC-44 package also offers a leaded mechanical format useful for through-hole assembly, repair, and designs where connectorized or socketed parts are preferred. Typical uses include industrial control panels, communications equipment, connected peripherals, printer controllers, automotive infotainment interfaces, and fixed-line access products. At 36 I/O, the controller can supervise multiple discrete inputs and outputs while retaining flash-based programmability for product variants and field updates. When designing the board, verify the oscillator and reset implementation against the manufacturer datasheet, reserve all required power pins, and route the 36 I/O signals according to the PLCC-44 pin description. Because PLCC parts can be socketed, confirm solderability and assembly-process requirements early in the mechanical design. This page consolidates the confirmed controller specifications, package details, sourcing information, application guidance, and design considerations into one engineering reference for evaluating the W77I058A25PL in new or existing 8051-compatible equipment.

RFQ İletişim
W77IC32A25PL - 25MHz ROMless 8051 MCU | Nuvoton
W77IC32A25PL

W77IC32A25PL - 25MHz ROMless 8051 MCU | Nuvoton

Nuvoton Technology Corporation W77IC32A25PL is an 8-bit ROMless W77 Turbo-51 microcontroller operating at 25 MHz, with 1K x 8 RAM, 36 I/O lines, and a 44-pin PLCC package. It is intended for embedded 8051-compatible control systems that require an external program-memory device while retaining a conventional 8-bit MCU architecture. A ROMless 8051 microcontroller is a variation of the MCS-51 microcontroller family in which the program memory is not integrated on the chip. The processor executes its firmware from external memory, allowing application-specific code capacity to be selected during system design. Within the semiconductor hierarchy, W77IC32A25PL belongs to the 8-bit microcontroller class, the broader embedded-processing category, and ultimately the microcontroller and semiconductor ecosystems. The device combines a 25 MHz clock with a 1K x 8 internal RAM array and 36 input/output lines. Its ROMless architecture is useful when firmware must exceed internal program-memory limits, when multiple products share the same external-memory configuration, or when code updates are managed outside the MCU. The -40°C to +85°C operating-temperature range supports industrial-temperature equipment while retaining compatibility with the established 8051 instruction set and peripheral environment. Technically, the W77 family is positioned as a Turbo-51 implementation, meaning that its clock rate is higher than that of the original 12 MHz 8051 class. At 25 MHz, the device offers greater instruction throughput than standard 8051 parts, although actual application performance depends on bus timing, wait states, external-memory access, and the selected memory architecture. The ROMless design makes external address decoding and code-memory interfacing central parts of the hardware design rather than optional functions. Typical uses include industrial controllers, appliance interfaces, embedded data-acquisition equipment, legacy 8051 peripheral boards, and control modules upgraded from slower standard 8051 processors. The broad I/O count allows the MCU to connect switches, displays, relays, sensors, and communication interfaces while the external program-memory bus accommodates larger firmware images. Designers should also account for the external memory interface timing when calculating system-level operating margins. PCB implementation requires a 44-pin PLCC land pattern, careful routing of the external program-memory bus, and decoupling close to the supply pins. Because the PLCC package is not represented by a dedicated diagram key in the XAIPART package library, use the manufacturer package drawing and pin-description table when assigning tracks. Confirm oscillator, reset, I/O, and memory-bus requirements against the manufacturer datasheet before releasing a layout. This product page combines the verified device identity, package and timing information, application guidance, drop-in comparison limits, and practical implementation cautions. It helps engineers determine whether the W77IC32A25PL fits a new 8051 design or whether an existing board requires qualified substitution and software validation.

RFQ İletişim
W77L032A25FL - 25MHz ROMless 8051 MCU | Nuvoton
W77L032A25FL

W77L032A25FL - 25MHz ROMless 8051 MCU | Nuvoton

Nuvoton Technology Corporation W77L032A25FL is an 8-bit ROMless 8051-compatible microcontroller operating at up to 25 MHz, with 1K x 8 RAM, 36 I/O lines, and a 44-BQFP package. It operates from 2.7 V to 5.5 V and uses an internal oscillator. The W77L032 core is designed to complete 8051 instructions faster than a traditional 8051 operating at the same clock speed. An 8051-compatible microcontroller is an embedded processor that implements the widely used MCS-51 instruction set and associated peripheral architecture. Within the embedded-control hierarchy, it belongs to the 8-bit MCU family and provides a simple alternative to larger 16-bit or 32-bit controllers when control logic, serial communications, timers, and limited data processing are the primary requirements. A ROMless device requires an external program-memory interface. Key characteristics include a 25 MHz maximum operating frequency, 1K x 8 bytes of internal RAM, 36 general-purpose I/O pins, and a 2.7 V to 5.5 V supply range. The device is intended for surface-mount assembly in a 44-BQFP package. Its ROMless architecture makes it useful when the application requires external program storage, configuration flexibility, or a larger memory arrangement than an on-chip ROM device provides. The W77L032 core is designed to reduce wasted instruction cycles relative to a conventional 8051 implementation. According to the manufacturer documentation, typical instruction execution can be approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency, depending on the instruction type. This improvement can shorten control-loop execution time without changing the software's 8051 instruction-level compatibility. Typical uses include industrial control panels, compact automation equipment, appliance controllers, serial-interface equipment, and embedded products that already use 8051-compatible code or peripherals. Designers should also consider the external program-memory interface and required memory type when laying out the PCB. For industrial and automotive contexts, verify qualification and operating-temperature requirements before committing the device to a production design. A key implementation consideration is that the external clock, reset, memory, and decoupling connections must follow the pin-assignment and electrical requirements in the W77L032/W77L032A/W77M032A datasheet. Confirm the external memory interface, reset behavior, and I/O allocation in the final schematic rather than deriving them from the package outline alone. This product page consolidates the verified device identity, core specifications, package details, sourcing options, and practical design guidance. It also separates the ROMless W77L032A configuration from related flash-based W77M032A devices, helping engineers compare memory architecture, clock requirements, and PCB compatibility before selection.

RFQ İletişim
W77L032A25PL - 25MHz ROMless 8051 MCU | Nuvoton
W77L032A25PL

W77L032A25PL - 25MHz ROMless 8051 MCU | Nuvoton

Nuvoton Technology Corporation W77L032A25PL is a ROMless 8-bit 8051-compatible microcontroller rated up to 25 MHz, supplied in a 44-pin PLCC package. It operates from 2.7 V to 5.5 V and provides 1K x 8 bits of RAM, an 8-bit data bus, and up to 36 I/O positions according to the catalog information. Its ROMless architecture separates execution storage from the controller, allowing the external program-memory configuration to be selected for the target application. An 8051 microcontroller is an 8-bit embedded-control component that combines a CPU core, memory interfaces, timers, serial communication, and parallel I/O. Within the product hierarchy, the W77L032 belongs to the 8051-compatible microcontroller family, which sits above general-purpose microcontrollers and below the broader category of embedded processors and semiconductors. The principal benefits of this device are its 25 MHz maximum clock, broad 2.7 V to 5.5 V supply range, and generous I/O count for a small 8-bit controller. ROMless operation is particularly useful when code storage must remain external or when a common controller can support several memory configurations. The 44-pin PLCC package also provides a leaded form factor that can simplify inspection, assembly, and prototyping compared with a very small surface-mount package. The W77 architecture uses an 8-bit data bus and provides 1K x 8 bits of RAM. One catalog entry identifies an internal oscillator, while another listing describes the ROM type as flash despite the primary product descriptions identifying the device as ROMless. Engineers should therefore consult the manufacturer datasheet and memory-interface section when confirming the exact external-memory configuration, oscillator arrangement, and timing characteristics for a production design. Typical applications include industrial controllers, serial-interface equipment, data acquisition modules, embedded keypads, motor-control interfaces, and legacy 8051 peripheral controllers. The combination of 36 I/O positions and a 25 MHz clock allows the device to coordinate multiple discrete inputs and outputs while retaining the straightforward programming model associated with 8051-compatible controllers. Design planning should begin with the 44-pin PLCC footprint, external program-memory requirements, oscillator connections, reset behavior, and the allocated I/O functions. Validate every pin against the current manufacturer datasheet before layout release, particularly where firmware depends on external memory timing or specific peripheral multiplexing. This product page consolidates the available electrical, package, sourcing, and replacement information into an engineering-focused selection guide. It also highlights the verified drop-in family options, application guidance, comparison limits, and design checks needed to evaluate the W77L032A25PL for an embedded-control design.

RFQ İletişim
W77L058A25DL - 8-Bit 25MHz 8051 MCU | Nuvoton | 40-Pin PDIP
W77L058A25DL

W77L058A25DL - 8-Bit 25MHz 8051 MCU | Nuvoton | 40-Pin PDIP

The Nuvoton Technology Corporation W77L058A25DL is an 8-bit CISC 8051-compatible microcontroller with a 25 MHz maximum clock, 32 KB of Flash program memory, 32 I/O ports, and a 40-pin PDIP package. Its operating supply range is 2.7 V to 5.5 V, supporting both 3.3 V and 5 V system designs. An 8051-compatible microcontroller is a general-purpose embedded-control device built around an 8-bit processing core, program memory, data memory, I/O ports, timers, serial communication peripherals, and interrupt control. The W77L058A belongs to the broader hierarchy of 8051 core → 8-bit microcontroller → embedded processor → semiconductor. Its DIP format also places it in the through-hole package family and makes it useful for prototype boards, educational systems, and industrial controllers assembled with sockets. Key features include 25 MHz operation, 32 KB (32K × 8) Flash program memory, 1 KB (1K × 8) RAM, 32 general-purpose I/O ports, and an 8-bit data bus. Flash memory supports repeated firmware updates, while the 32 I/O pins provide substantial direct interfacing capacity for digital inputs, outputs, displays, relays, and external peripherals. The 2.7 V to 5.5 V supply range allows operation across common industrial and embedded voltage levels. The W77L058A25DL uses the enhanced 8051 CISC architecture, with an 8-bit data path and program-memory organization typical of that family. Its 40-pin PDIP package exposes 32 I/O functions alongside the core interface and power pins. Unlike a surface-mount design, the through-hole DIP format is particularly convenient for insertion into standard development sockets and can simplify hand assembly, inspection, and replacement. Typical uses include educational 8051 trainers, appliance controllers, small industrial automation modules, digital I/O concentrators, LED displays, and embedded interface boards. The combination of 32 KB Flash, 32 I/O lines, and a 25 MHz clock is suitable for control-oriented firmware that must coordinate multiple discrete inputs and outputs. Designers should still confirm peripheral availability, oscillator requirements, reset behavior, and exact pin assignments in the manufacturer datasheet. For a new design, check the 40-pin footprint, supply decoupling, clock circuit, programming method, and reset requirements before layout. Use a standard 0.1-inch pitch footprint compatible with the PDIP package and route sensitive clock and reset signals away from noisy switching nodes. Firmware development should use the manufacturer-supported 8051 toolchain and verify all register definitions against the device documentation. This page combines the key operating limits, package details, application guidance, and replacement considerations into a design-focused reference. It also highlights the distinction between a true pin-compatible replacement and a merely similar 8-bit microcontroller, helping engineers avoid choosing a component that requires board changes, firmware changes, or an external clock interface.

RFQ İletişim
W77L058A25FL - 8-Bit 80C51 32KB Flash 25MHz MCU | Nuvoton
W77L058A25FL

W77L058A25FL - 8-Bit 80C51 32KB Flash 25MHz MCU | Nuvoton

The Nuvoton Technology Corporation W77L058A25FL is an 8-bit flash microcontroller built on a 4-cycle 8051 core, with 32 KB of on-chip flash memory, a 25 MHz maximum operating frequency and a 2.7 V to 5.5 V supply range, packaged in a 44-pin MQFP (10 x 10 mm) surface-mount package. It targets cost-sensitive, high-volume consumer and industrial control designs that need a small footprint, wide supply tolerance and legacy 8051 toolchain compatibility. An 8-bit microcontroller (MCU) is a self-contained computing element that integrates a CPU core, program memory, data memory and peripherals onto a single die. The classic 8051 core, also called an MCS-51 or C51, remains the most widely installed 8-bit architecture in the industry, and its 4-cycle pipeline (rather than the original 12-cycle design) roughly triples instruction throughput compared with an early 8051. As a member of the wider microcontroller -> embedded processor -> semiconductor hierarchy, this part targets cost-sensitive embedded control rather than signal processing or connectivity. Key features of the W77L058A25FL include 32 KB of flash program memory for in-circuit programmable firmware, a 25 MHz clock rating that delivers up to 25 million instruction cycles per second, and a 2.7 V to 5.5 V operating range that covers both 3.3 V and 5 V system rails. Because the core is an 8051 derivative, existing assembly routines and Keil C51, SDCC or IAR 8051 toolchains can be reused without architectural rework, protecting firmware investment. The 44-pin MQFP (10 x 10 mm) footprint balances I/O count against board area, giving designs four 8-bit ports plus dedicated reset, clock and programming pins in a compact square surface-mount package suitable for automated assembly. As an MCU, the device integrates flash, RAM and standard 8051 peripherals (timers, serial ports and interrupt controller) on one die, eliminating the need for external program memory. Typical applications include small appliance and kitchen equipment controllers, LED driver and dimming modules, household meter and energy-monitoring front panels, industrial sequence controllers, keyboard and panel interface hubs, and compact sensor-node controllers where a 25 MHz 8051 core is sufficient and a 32 KB firmware budget is adequate. When designing around the W77L058A25FL, verify the pin multiplexing of each port against the peripheral assignment required by your firmware, and keep the decoupling network short: a 0.1 uF ceramic plus a 4.7 uF bulk capacitor at VDD/VSS minimizes brownout risk during flash write cycles. The 44-pin square outline also demands careful lead-frame tooling, so confirm the recommended land pattern and reflow profile before committing to volume production. This page consolidates distributor availability, pin- and package-matched drop-in alternatives from the same 8051 family, and practical layout and toolchain notes that go beyond the manufacturer datasheet.

RFQ İletişim
W77L058A25PL - 25MHz 8-Bit 8051 MCU | Nuvoton | PLCC-44
W77L058A25PL

W77L058A25PL - 25MHz 8-Bit 8051 MCU | Nuvoton | PLCC-44

The Nuvoton Technology Corporation W77L058A25PL is a 25 MHz, 8-bit 8051-compatible microcontroller with 32 KB of flash program memory, 1 KB of RAM, and 36 I/O pins in a 44-pin PLCC package. It operates from 2.7 V to 5.5 V and is designed for embedded control systems that require legacy 8051 software compatibility, moderate processing speed, and a compact leaded-chip package. An 8-bit microcontroller is a programmable semiconductor device that integrates a CPU, program memory, data memory, I/O ports, timers, and communication peripherals on one device. The W77L058A25PL belongs to the 8051 microcontroller family within the broader embedded-controller hierarchy. Its four-cycle 8051 core provides predictable instruction execution for motor controls, instrumentation, industrial controllers, and legacy equipment. Key features include a 25 MHz maximum operating frequency, 32 KB of flash memory, 1 KB of internal RAM, and 36 I/O lines. The 2.7 V to 5.5 V supply range allows operation from regulated 3.3 V and 5 V rails. Its 44-pin PLCC package provides 36 usable I/O pins for digital interfaces, control signals, displays, and external peripheral connections. The device retains compatibility with the established 8051 architecture while using flash rather than legacy EPROM or mask-programmed memory. This makes it suitable for designs migrating from older 8051 controllers, as well as new embedded products where an 8-bit control engine remains preferable to a higher-cost application processor. The operating frequency provides additional timing margin for interrupt-driven control, serial communication, and periodic sensing tasks. Typical applications include industrial automation modules, motor and relay controllers, programmable logic controllers, data acquisition equipment, appliance controllers, LED sign controllers, and communication interfaces. Its 36 I/O pins are particularly useful when a design needs multiple discrete control connections without using a larger programmable logic device. PCB design should preserve the PLCC footprint, socket or land pattern, pin numbering, and adequate clearance around the leaded package. Designers should also account for the 2.7 V minimum operating voltage, configure the oscillator and reset circuitry according to the manufacturer datasheet, and validate unused I/O states before production. A socket can simplify prototype replacement but increases board height and contact resistance compared with direct soldering. This product page consolidates the verified electrical identity, package information, sourcing path, application guidance, and qualified engineering trade-offs into one technical reference. It also distinguishes the W77L058A25PL from alternatives that may offer similar general-purpose microcontroller functions without providing the required package-level drop-in compatibility.

RFQ İletişim
W77L516A25DL - 8-Bit 25MHz 8051 MCU | Nuvoton | DIP-40
W77L516A25DL

W77L516A25DL - 8-Bit 25MHz 8051 MCU | Nuvoton | DIP-40

The Nuvoton Technology Corporation W77L516A25DL is an 8-bit W77 8051-compatible microcontroller with a 25 MHz clock, 64 KB of flash program memory, 1 KB of RAM, and 32 I/O pins in a 40-DIP through-hole package. The part combines the established 8051 programming model with a redesigned processor core that reduces wasted clock and memory cycles, allowing many instructions to execute faster than on a traditional 8051 at the same crystal frequency. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral interfaces on one device. The W77L516A belongs to the 8051-compatible MCU family within the broader embedded-controller and integrated-circuit hierarchy. This architecture is useful for industrial controllers, embedded I/O systems, and legacy-compatible products that benefit from an established instruction set and a broad selection of supporting software and peripheral devices. The W77L516A25DL provides 64 KB of flash program memory, 1 KB of internal RAM, 32 general-purpose I/O lines, and operation up to 25 MHz. Its 40-DIP mechanical format supports through-hole assembly and is suited to industrial control boards, test fixtures, embedded instruments, and legacy peripheral-controller designs. Flash memory retains programmed instructions without power, while the available RAM supports working variables, stack operations, and data buffering. The redesigned W77 processor core is the principal technical distinction from an original 8051 implementation. The manufacturer datasheet states that instruction execution is typically 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, depending on the instruction type. This improvement can increase useful processing capacity without changing the nominal clock rate, although final application performance still depends on instruction mix, memory organization, interrupt handling, and peripheral timing. Typical applications include industrial automation controllers, data-acquisition front ends, keypad and display interfaces, motor or relay supervisory logic, test and measurement equipment, and embedded communication modules. A system designer can use the 32 I/O pins for digital inputs, outputs, interrupt-capable signals, serial functions, and external memory or peripheral interfaces, subject to the port configuration and multiplexing described in the manufacturer datasheet. The principal design consideration is hardware compatibility. Before replacing an original 8051 design, verify oscillator requirements, reset behavior, port pin functions, memory addressing, interrupt vectors, external-memory timing, and peripheral pin assignments. The 25 MHz clock rating also requires a suitable crystal or clock source, correct bypass capacitors, and a PCB layout that preserves signal integrity around the oscillator and reset circuitry. This product overview combines the core architecture, memory configuration, package characteristics, replacement considerations, and application guidance with practical information for engineers evaluating the W77L516A25DL in new or legacy 8051-compatible designs.

RFQ İletişim
W77L516A25FL - 25MHz 64KB 8051 MCU | Nuvoton | Embedded Control
W77L516A25FL

W77L516A25FL - 25MHz 64KB 8051 MCU | Nuvoton | Embedded Control

The Nuvoton Technology Corporation W77L516A25FL is an 8-bit W77 8051-compatible microcontroller operating at 25 MHz, with 64 KB of built-in Flash program memory and 1 KB of internal RAM. The device is packaged in a 44-pin BQFP package measuring 10 mm by 10 mm and provides 36 general-purpose I/O pins for embedded control systems. An 8051 microcontroller is a compact CISC-based control processor that integrates CPU registers, program memory, data memory, and peripherals into one device. Its place in the product hierarchy is microcontroller → embedded processor → programmable controller → semiconductor. The W77L516A25FL combines the widely established 8051 instruction set with on-chip Flash, making it suitable for products that benefit from legacy 8051 code compatibility while requiring a modern nonvolatile program-memory implementation. Key features include a 25 MHz operating speed, 64 KB of Flash organized as 64K x 8, 1 KB of SRAM organized as 1K x 8, and 36 I/O lines. The operating-voltage listing spans 2.7 V to 5.5 V, while another technical listing identifies 4.5 V as a relevant operating-voltage value. The device also includes an internal oscillator according to the component specifications. These characteristics position it for compact embedded controllers, industrial automation modules, and cost-sensitive control products with moderate processing requirements. The W77L516A25FL belongs to Nuvoton's W77 series and retains an 8-bit MCU architecture rather than using a 32-bit core. Flash memory allows firmware to be stored without an external program-memory device, reducing the component count in a finished controller. The 36 available I/O pins provide substantial interface capacity for digital inputs, outputs, indicators, and external control signals, although the exact peripheral multiplexing must be assigned from the manufacturer pin-description table. Typical application areas include industrial equipment interfaces, data-collection terminals, programmable control panels, building automation equipment, and compact embedded control modules. A 25 MHz clock provides useful processing headroom for 8051-based supervisory tasks, state machines, communication routines, and peripheral coordination. The 44-pin package also leaves a broader interface budget than many smaller microcontroller packages while remaining compact enough for embedded boards. When laying out a W77L516A25FL board, begin with the manufacturer pin-description table and assign every power, ground, reset, clock, and I/O connection explicitly. Confirm the operating rail required by the selected design, decouple each supply connection locally, and route oscillator and sensitive signals away from high-current switching nodes. The 8051 architecture is mature, but firmware timing, peripheral selection, and pin multiplexing must still be checked against the device documentation. This product page consolidates the core electrical specifications, package information, sourcing details, application guidance, and engineering considerations into a concise engineering reference. It is intended to help designers identify whether the W77L516A25FL's Flash memory, 25 MHz speed, 36 I/O pins, 44-pin BQFP package, and 8051 compatibility fit an embedded-control design.

RFQ İletişim
W77L516A25PL - 25MHz 8-Bit 8051 MCU, 64KB Flash | Nuvoton
W77L516A25PL

W77L516A25PL - 25MHz 8-Bit 8051 MCU, 64KB Flash | Nuvoton

The Nuvoton Technology Corporation W77L516A25PL is an 8-bit 8051-compatible microcontroller operating at 25 MHz, with 64 KB of flash program memory, 1 KB of RAM, and 36 I/O lines in a 44-pin PLCC package. It combines the familiar 8052 instruction set with a redesigned processor core that executes instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same clock frequency. The W77L516A25PL is designed for embedded-control applications requiring deterministic serial communication, timer resources, parallel I/O, and programmable flash storage. An 8-bit microcontroller is a compact processor intended to control embedded systems rather than execute a desktop operating system. Within the semiconductor hierarchy, the W77L516A25PL belongs to the 8051-compatible microcontroller class and retains the standard 8052 peripheral model, including four 8-bit I/O ports, three 16-bit timer/counters, a full-duplex serial port, and interrupt resources. Its instruction-set compatibility allows legacy 8051-oriented code and development practices to be retained during product modernization. The principal device characteristics include 64 KB of flash program memory, 1 KB of on-chip RAM, 36 I/O pins, and a 25 MHz operating frequency. Additional integrated resources identified for this device include a serial port, power-on reset, and a watchdog timer. The redesigned core removes wasted clock and memory cycles, so software timing can improve without changing the external clock speed. Flash memory also provides a more flexible program-storage medium than mask-programmed or one-time-programmable microcontroller implementations. The 44-pin PLCC package provides a leaded, socket-compatible format suited to controllers, interface modules, industrial control boards, and legacy system upgrades. Its pin-compatible 8052 heritage simplifies board-level continuity when a design moves from a conventional 8051-class controller to this faster implementation. Designers should still validate the clock configuration, peripheral allocation, reset behavior, and memory map in the target system rather than assuming every legacy peripheral behaves identically. Typical uses include industrial equipment interfaces, serial protocol bridges, data acquisition modules, appliance controllers, embedded instrumentation, and communication adapters. The combination of four parallel I/O ports, three timers, serial communications, and 36 I/O lines is especially useful for systems that must connect switches, sensors, displays, relays, and legacy peripherals while maintaining predictable control timing. The principal design consideration is preserving compatibility at both software and board level. Confirm that the chosen oscillator and reset circuit meet the datasheet requirements, allocate every pin according to the manufacturer's pin description, and include adequate decoupling. Because this is a legacy-compatible 8-bit architecture, migration planning should also include confirmation of compiler support, bootloader behavior, peripheral register mapping, and any source-code changes required for the faster core. This page combines the manufacturer's device data with practical selection guidance, application context, package information, and verified sourcing links. It is intended to help engineers determine whether the W77L516A25PL fits an existing embedded-control design and how to evaluate compatible W77-family options without overlooking memory, timing, package, or toolchain requirements.

RFQ İletişim
W77L532A25DL - 25MHz 8051 128KB Flash | Nuvoton
W77L532A25DL

W77L532A25DL - 25MHz 8051 128KB Flash | Nuvoton

The Nuvoton Technology Corporation W77L532A25DL is an 8-bit 8051-compatible microcontroller with 128KB of program Flash memory, 1K x 8 RAM, 32 general-purpose I/O pins, and a 25MHz operating frequency in a 40-pin DIP package. It combines the familiar 8051 programming model with a redesigned processor core intended to reduce wasted instruction cycles. An 8051-compatible microcontroller is an embedded-control device built around the classic 8051 instruction set architecture. It combines a CPU core, program memory, data memory, serial and parallel I/O, timers, interrupt control, and other peripherals on one integrated circuit. This hierarchy places the W77L532 within the microcontroller, embedded processor, and semiconductor categories used for industrial controls, communications equipment, and compact control systems. The W77L532A25DL's principal specifications include 128KB (128K x 8) of Flash program memory, 1K x 8 of RAM, 32 I/O lines, and a 25MHz clock rate. Its redesigned core is described as executing 8051 instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal frequency, depending on the instruction type. This provides meaningful performance improvement without changing the established 8051 software environment. The W77L532 is a fast 8051-compatible microcontroller designed to retain software compatibility while improving processor efficiency. Flash memory supports in-system firmware storage and programming workflows, while the 32 available I/O lines allow the device to interface directly with sensors, switches, displays, relays, and data converters. The 25MHz operating point is suitable for embedded control tasks that require more timing margin than a lower-speed 8051 implementation while retaining legacy code compatibility. Typical applications include industrial control panels, data acquisition modules, instrumentation interfaces, serial protocol bridges, appliance controllers, and compact embedded systems. Its 32 I/O pins make it especially useful for systems that need multiple digital inputs and outputs, while 128KB of Flash provides room for application code, protocol handlers, configuration data, and boot routines. Designers should confirm oscillator, reset, and interface requirements against the manufacturer datasheet before laying out the PCB. The 40-pin DIP format simplifies prototyping and through-hole assembly, but the package occupies more board area than a comparable surface-mount controller. Firmware migration also requires attention to timing, interrupt behavior, and peripheral differences rather than assuming complete functional equivalence with every original 8051 device. This product page consolidates the confirmed memory, speed, I/O, package, and architecture characteristics into an engineering-oriented reference. It also distinguishes verified device facts from parameters that require confirmation, helping designers evaluate the W77L532A25DL for 8051-compatible embedded-control designs, sourcing decisions, and legacy board maintenance.

RFQ İletişim
W77L532A25FL - 8-Bit 128KB Flash MCU | Nuvoton
W77L532A25FL

W77L532A25FL - 8-Bit 128KB Flash MCU | Nuvoton

The Nuvoton W77L532A25FL is an 8-bit embedded microcontroller with 128KB of Flash program memory, 36 I/O pins, and a 25 MHz maximum operating frequency. It is packaged in a 44-pin BQFP and includes an 8051 core, serial-port connectivity, a power-on reset peripheral, and a watchdog timer. The device is identified as an active part and is positioned for compact embedded-control designs that require nonvolatile firmware storage and a broad external bus interface. An 8-bit microcontroller is a semiconductor integrated circuit designed to execute embedded instructions using an 8-bit data path. The W77L532A25FL belongs to the 8051-compatible microcontroller hierarchy, combining a CPU core, Flash memory, RAM, serial communication, and dedicated system-control peripherals in one package. Its EBI/EMI interface permits connection to external memory or peripheral devices when the on-chip resources are insufficient. The principal feature set includes 128KB, or 128K × 8, of Flash program memory and 1K × 8 bytes of RAM. Its 36 available I/O lines support peripheral functions and general digital control. At up to 25 MHz, the MCU provides a defined operating speed for embedded tasks. Program-once development is supported by the Flash memory architecture, while power-on reset and watchdog-timer functions improve recovery after startup errors or unexpected program stalls. The W77L532A25FL is an 8-bit MCU rather than a high-performance 32-bit processor. Its architecture is appropriate for deterministic control tasks, data acquisition, communication bridging, keypad and display control, and compact industrial equipment. The 44-pin BQFP exposes substantially more I/O than a small lead-frame package, making external sensors, displays, relays, and memory devices easier to connect while still supporting surface-mount assembly. Typical applications include programmable control panels, instrumentation, serial-interface adapters, industrial controllers, and embedded peripheral modules. Its 36 I/O pins can distribute control signals across multiple external devices, while the EBI/EMI interface provides a route to additional bus-connected components. The serial port is useful for host communication, configuration transfer, firmware updates, or linking the controller to another embedded system. The main design consideration is power and clock planning. Engineers should use the manufacturer's oscillator and reset guidance when creating the clock network, preserve the required supply decoupling arrangement, and confirm that every signal connected to the 36 available I/O pins has a suitable input level. Firmware should also enable the watchdog timer in applications where a hung task could create unsafe equipment behavior. This product record combines the part's core embedded specifications, package information, sourcing structure, and engineering guidance in one concise reference. It supports initial design review by connecting the 8051 core, 128KB Flash memory, 1K × 8 RAM, 25 MHz speed, and 36 I/O capabilities with practical implementation considerations for reliable embedded systems.

RFQ İletişim
W77L532A25PL - 8-Bit 25MHz 128KB Flash MCU | Nuvoton
W77L532A25PL

W77L532A25PL - 8-Bit 25MHz 128KB Flash MCU | Nuvoton

Nuvoton Technology Corporation W77L532A25PL is an 8-bit W77 8051-compatible microcontroller operating at up to 25 MHz, with 128 KB of embedded Flash program memory and 36 I/O pins in a 44-pin PLCC package. The device combines 128 KB (128K x 8) Flash memory with 1K x 8 RAM and is designed for embedded control systems that require deterministic 8-bit processing and a compact leaded package. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O, and peripherals into one device. In the product hierarchy, the W77L532A25PL is an 8-bit MCU, part of the 8051-compatible microcontroller family, and a member of the broader embedded-processing and semiconductor categories. It is intended for control rather than general-purpose computing, making it suitable for industrial controllers, embedded instruments, data-acquisition systems, and compact automation products. The principal device characteristics are a 25 MHz maximum operating frequency, 128 KB of Flash program memory, 1K x 8 RAM, and 36 available I/O lines. Flash program memory supports firmware storage without a separate external memory device, while the 44-pin PLCC package provides a leaded, socket-compatible mechanical format for prototypes and established control-board assemblies. The component is also identified as supporting 3.3 V and 5 V operation, enabling its use in mixed-voltage embedded equipment. The W77L532A25PL uses the 8-bit W77 8051-compatible instruction set and CISC-oriented embedded-control architecture. Its 36 I/O pins provide connectivity for digital sensors, relays, displays, communication interfaces, and actuator-control signals. This combination of moderate clock speed, internal Flash, and a substantial I/O count is useful when the design requires predictable peripheral control without the complexity of a higher-performance processor. Exact peripheral allocations and electrical limits must be confirmed from the manufacturer’s pin-description table before PCB routing. Typical applications include programmable industrial controls, serial protocol bridges, relay and solenoid controllers, embedded measurement instruments, test fixtures, and legacy 8051 peripheral expansion. The 128 KB program capacity is particularly useful for firmware containing communications tables, calibration constants, diagnostics, and application-specific state machines. The 36 I/O lines can distribute control traffic across sensors and actuators while keeping the design within a single package. When integrating the controller, begin with the exact pin-description table, oscillator requirements, and recommended decoupling configuration in the manufacturer datasheet. Preserve the PLCC land pattern, observe the stated operating-voltage range, and validate unused pins according to the device documentation. Because 8051 peripherals and interrupt behavior are architecture-specific, confirm timer, serial, and interrupt resources before assigning them to time-critical functions. This product page combines the key memory, speed, I/O, and package characteristics with application guidance, pin-placement cautions, and a same-package alternative comparison. It also provides a practical sourcing path through the Request a Quote form, helping engineers evaluate whether the W77L532A25PL fits both the original PCB footprint and the required embedded-control functionality.

RFQ İletişim
W77M032A25FL - 8-Bit 25MHz MCU, 36 I/O | Nuvoton
W77M032A25FL

W77M032A25FL - 8-Bit 25MHz MCU, 36 I/O | Nuvoton

The Nuvoton Technology Corporation W77M032A25FL is an 8-bit ROMless microcontroller operating at up to 25 MHz, with 1 KB x 8 RAM, 36 general-purpose I/O pins, and a 44-pin BQFP package. Its 36 available I/O positions make it suitable for compact embedded-control systems that need broad digital connectivity without moving to a larger mixed-signal MCU package. An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and integrated memory, peripherals, and I/O. The W77M032A25FL belongs to the MCU hierarchy used for real-time control, digital interface, measurement, and automation tasks. Unlike a general-purpose processor, it is intended to execute embedded control code close to the sensors, switches, indicators, and communication interfaces connected to its pins. The device provides 1 KB x 8 of SRAM and up to 25 MHz operation. Its internal oscillator supports designs that do not require an external clock source. The 36-I/O configuration supports multiple digital inputs and outputs on a single 44-BQFP device, reducing the need for external I/O expanders in moderate-complexity control designs. The exact embedded program-memory arrangement and peripheral configuration should be confirmed in the manufacturer datasheet before final firmware and PCB design. As a ROMless MCU, application code must be loaded into external program memory rather than residing in an on-chip ROM. The system designer therefore needs to account for the external memory interface, address routing, and programming implementation in the board-level architecture. This makes the device more appropriate for designs with an established external-memory path than for cost-sensitive designs that favor integrated flash memory. Typical uses include industrial keypad and panel control, digital instrumentation, simple motor or relay sequencing, embedded timers, LED status and annunciation systems, and compact automation controllers. Its 36 I/O pins are especially useful when a design must connect multiple discrete inputs and outputs while retaining a 44-pin surface-mount footprint. The primary design consideration is firmware and memory-interface validation. Confirm the external memory requirements, reset behavior, clock configuration, programming method, and complete peripheral assignment in the manufacturer datasheet before schematic release. PCB layout should preserve short, clean routes for clock, reset, and external-memory signals while allowing adequate decoupling around the supply pins. This product page consolidates the verified device specifications, source links, application guidance, design cautions, and replacement analysis into one engineering-focused reference. It also distinguishes confirmed electrical facts from parameters that require confirmation before schematic, firmware, or PCB sign-off.

RFQ İletişim
W78C032C40DL - 40MHz 8051 ROMless MCU | Winbond
W78C032C40DL

W78C032C40DL - 40MHz 8051 ROMless MCU | Winbond

The Winbond W78C032C40DL is an 8-bit 8051-compatible ROMless microcontroller operating up to 40 MHz in a 40-pin DIP package. It provides 256 x 8 RAM, 32 I/O pins, an internal oscillator, one UART, and an external bus interface for embedded control designs. The W78C032 uses a 12T 8051 MCU architecture and operates from 4.5 V to 5.5 V over a 0 °C to 70 °C temperature range. An 8051 microcontroller is an embedded processor family designed around a compact accumulator-based architecture, program memory, internal RAM, serial communication, and configurable digital I/O. The W78C032C40DL belongs to the W78 microcontroller family, combining the established 8051 instruction set with a higher operating speed and a conventional 40-pin through-hole footprint for industrial and legacy-compatible control systems. The main device features include a 40 MHz maximum clock speed, ROMless program-memory architecture, 256 bytes of RAM, 32 I/O lines, one UART, and an external bus interface. The DIP-40 package makes the device suitable for prototypes, controller boards, educational platforms, and equipment where socketed through-hole assembly and easy replacement are preferred. The ROMless architecture requires external program storage, allowing firmware capacity and memory technology to be selected separately. The 12T 8051 core supports compatibility with traditional 12T 8051 designs while providing a practical upgrade path for higher clock speed. The external bus interface can be used for additional memory or peripheral interfacing, while the UART provides a straightforward path for configuration, diagnostics, and host communication. Designers should use the manufacturer pin-description table and application information when assigning the 40 package pins and implementing the external memory bus. Typical applications include industrial controllers, embedded timing modules, serial data concentrators, instrumentation interfaces, educational 8051 platforms, and legacy equipment refreshes. Because the device is ROMless, it is especially useful where external Flash or EPROM storage is acceptable and provides a clear separation between the controller IC and the selected firmware memory. A key design consideration is the relationship between the 4.5 V to 5.5 V supply requirement and the external program-memory interface. The clock, reset circuitry, UART baud rate, and bus timing must all be designed around the 40 MHz operating limit and the package-specific pin assignments. Use the W78C032C40DL datasheet as the controlling reference for electrical limits, timing, memory-interface behavior, and programming guidance. This product summary combines the device identity, core architecture, memory and I/O characteristics, package format, application guidance, and sourcing considerations into a concise engineering reference. It is intended to support initial component selection, board planning, firmware architecture decisions, and replacement assessments before the complete manufacturer documentation is reviewed.

RFQ İletişim
W78C032C40FL - 40MHz 8-Bit ROMless 8051 MCU | Nuvoton
W78C032C40FL

W78C032C40FL - 40MHz 8-Bit ROMless 8051 MCU | Nuvoton

Nuvoton Technology Corporation W78C032C40FL is an 8-bit W78-series 8051-compatible microcontroller with a 40 MHz maximum clock rating, ROMless program memory architecture, 5 V supply operation, and a 44-pin PQFP package. It is designed for embedded control systems that require a compact 8-bit CPU, external program storage, and a conventional parallel microcontroller interface. An 8051-compatible microcontroller is an embedded processing component that executes firmware from external program memory and controls peripherals through dedicated digital I/O and internal resources. The W78 family combines the widely established 8051 instruction set with an extended 8-bit architecture, positioning the device within the broader hierarchy of microcontrollers, embedded processors, and semiconductor control devices. The W78C032C40FL combines ROMless operation, 8-bit processing, a 40 MHz clock classification, and a 5 V operating supply. ROMless construction allows firmware capacity to be determined by an external program-memory device, making this configuration useful when applications require flexible code storage, in-system programming, or firmware separation. Its 44-pin package also provides a larger pin count than many compact 8-bit microcontrollers, supporting applications with more external signals. The architecture is listed as 8-bit 8051 CISC, allowing engineers to use the established W78 programming model and associated development tools. Because the MCU is ROMless, a complete board design must include suitable external program memory and the required bus interface. Clocking, reset, power, and signal conditioning should follow the detailed electrical and timing requirements in the manufacturer datasheet before schematic release. Typical uses include industrial control panels, sensor-conditioning controllers, communication interfaces, programmable logic controllers, appliance controllers, and compact embedded automation modules. The device is particularly relevant to legacy or cost-sensitive 8051 designs where retaining the W78 software ecosystem is more valuable than adopting a different instruction set or requiring a larger pin count. A key design consideration is firmware-memory integration. Confirm that the external memory address, data, and control lines can be routed without compromising timing, while preserving the required oscillator and reset behavior. Because available listing descriptions use inconsistent clock wording, the highest operating frequency and oscillator configuration should be verified against the manufacturer datasheet before the device is specified for timing-critical operation. This page consolidates the documented device identity, package information, sourcing guidance, and engineering considerations into a compact selection reference. It also distinguishes verified manufacturer information from unresolved details, helping engineers identify what must be confirmed before schematic, firmware, and PCB-layout commitments are finalized.

RFQ İletişim
W78C032C40PL - 40MHz ROMless 8051 MCU | Nuvoton
W78C032C40PL

W78C032C40PL - 40MHz ROMless 8051 MCU | Nuvoton

Nuvoton W78C032C40PL is an 8-bit W78 8051-compatible microcontroller operating up to 40 MHz with a 4.5 V to 5.5 V supply range. The device is ROMless, provides 256 x 8 bits of data RAM, and offers 32 general-purpose input/output pins in a 44-pin PLCC package. A microcontroller is a programmable semiconductor that combines a CPU core, memory, input/output ports, and peripheral functions on one integrated circuit. The W78 belongs to the 8051 microcomputer hierarchy, where a small instruction set and dedicated I/O ports provide a practical platform for embedded control. A ROMless configuration requires an external program-memory device, making the MCU suitable for systems where firmware storage is implemented separately from the controller. Principal characteristics include a maximum operating frequency of 40 MHz, an internal oscillator, 32 I/O pins, 256 bytes of data RAM, and a 4.5 V to 5.5 V operating supply range. Its 44-pin PLCC package provides a leaded, surface-mount form factor with J-leads. The Pb-free marking identifies the component as intended for lead-free manufacturing environments, although broader environmental and automotive qualifications should be confirmed separately. The 8-bit architecture is optimized for compact embedded-control logic rather than high-throughput computing. With 32 I/O pins, an external ROM interface, and 256 bytes of internal RAM, the W78C032C40PL can support digital monitoring, sequential logic, human-interface control, and simple peripheral-control functions. Designers should account for the limited RAM when sizing buffers and selecting between direct RAM variables, external data memory, and peripheral registers. Typical applications include industrial control panels, programmable logic controllers, instrumentation, appliance controllers, data-acquisition front ends, and embedded systems that already use the W78 or 8051 instruction set. The 40 MHz clock capability provides additional timing margin for interrupt-driven control loops, while the external program-memory architecture permits firmware capacity to scale independently from the MCU. A critical design consideration is that the controller requires external program memory because it is ROMless. The memory interface, address decoding, reset behavior, oscillator configuration, and bypass components should therefore be implemented according to the manufacturer datasheet. PLCC assembly also requires inspection for solder-joint formation, pin-1 orientation, and adequate board-level clearance around the J-leads. This product page consolidates the core electrical characteristics, replacement candidates, package information, and design considerations needed to evaluate the W78C032C40PL for an existing 8051-compatible embedded-control platform.

RFQ İletişim
W78C438C40FL - 40MHz 8-Bit ROMless MCU | Nuvoton | 100-QFP
W78C438C40FL

W78C438C40FL - 40MHz 8-Bit ROMless MCU | Nuvoton | 100-QFP

Nuvoton Technology Corporation W78C438C40FL is a 40 MHz, 8-bit, ROMless CMOS microcontroller with 40 I/O lines, a 100-QFP package, and a 4.5 V to 5.5 V supply range. Designed as a derivative of the W78C58 microcontroller family, it provides external program-memory addressing and substantial peripheral integration for embedded control systems. The W78C438C is functionally compatible with the W78C32 while extending its memory and I/O capabilities. An 8051-family microcontroller is an embedded-processing device built around a compact 8-bit CPU, program and data memory interfaces, timers, serial communication blocks, and general-purpose I/O. Within the product hierarchy, the W78C438C40FL is an 8-bit microcontroller, an embedded processor, and a system-on-chip platform designed for deterministic control tasks. Its ROMless architecture allows the application program to reside in external memory while the microcontroller executes code and manages peripheral activity. The device operates at up to 40 MHz and provides five general-purpose I/O ports totaling 40 I/O lines according to the manufacturer datasheet. It supports 256 bytes of 8-bit RAM and can use a 64 KB program-memory and 1 MB data-memory addressing arrangement, or memory-mapped chip-select logic. The 4.5 V to 5.5 V operating range supports conventional 5 V industrial and embedded equipment. An external oscillator provides clocking flexibility when the system requires a specific timing source. The W78C438C architecture extends the classic 8051 design with memory-mapped external interfaces and four external interrupts. Its 40 MHz operating capability allows more frequent interrupt servicing and peripheral transfers than lower-speed 8-bit implementations. Because program memory is external, board-level design must account carefully for address decoding, bus timing, access control, and the electrical characteristics of the selected memory devices. The 100-QFP package exposes substantially more interface signals than smaller 8-bit controller packages. Typical applications include industrial automation controllers, data-acquisition and I/O-expansion systems, embedded communication equipment, industrial instrumentation, legacy 8051 peripheral controllers, and custom control platforms requiring external program storage. Its five ports make it useful where numerous digital lines must connect to sensors, relays, displays, memory devices, and bus transceivers. A functional-compatible 8051 software base can also simplify migration from established controller designs. For a new board, verify external memory address decoding and interrupt-priority assignments before committing the layout. Keep high-current bus and output-driver traces separate where practical, provide local bypass capacitance at the supply pins, and confirm all external signals against the pin-description table in the manufacturer datasheet. The W78C438C40FL is also identified as an active lifecycle part, making it appropriate for both new designs and maintenance of existing 8051-based platforms. This page consolidates the core electrical, memory, package, and lifecycle characteristics of the W78C438C40FL with practical implementation guidance, application fit, comparison fields, and design checks. It focuses on decisions engineers must make when integrating a ROMless, high-speed 8-bit microcontroller into an external-memory architecture.

RFQ İletişim
W78C438C40PL - 40MHz ROMless 8051 MCU | Nuvoton | 84-LCC
W78C438C40PL

W78C438C40PL - 40MHz ROMless 8051 MCU | Nuvoton | 84-LCC

Nuvoton Technology Corporation W78C438C40PL is an 8-bit ROMless 8051-compatible microcontroller with a maximum clock speed of 40 MHz, 40 I/O ports, and an 84-pin PLCC package. It operates from a 4.5 V to 5.5 V supply and includes 256 × 8 bytes of internal RAM, making it suitable for embedded control systems requiring external program memory and substantial digital I/O. An 8051-compatible microcontroller is an embedded-processing device built around the classic 8051 instruction set and peripheral architecture. Within the semiconductor hierarchy, this device belongs to the 8-bit microcontroller class, combines a CPU core with memory and I/O interfaces, and provides a programmable platform for industrial equipment, communication controllers, test systems, and legacy-compatible control products. Its 84-pin PLCC package offers many external bus and port connections for designs that exceed the pin count of smaller devices. The W78C438C40PL provides a 40 MHz maximum operating frequency, an 8-bit data bus, and four major groups of 10 I/O lines, totaling 40 I/O ports. It uses 256 bytes of RAM for variables, stack operations, and intermediate data. Because the device is ROMless, program code must be supplied through an external memory interface rather than an internal masked ROM. The 4.5 V to 5.5 V operating range supports conventional 5 V embedded systems. The W78 family architecture combines an 8051-compatible execution core with external program-memory interfacing, serial communication, and extended parallel I/O. EBI/EMI connectivity expands the design beyond the dedicated port pins, enabling access to external memory and peripheral devices. The 84-pin PLCC format supports both legacy socketed assembly workflows and surface-mount production processes, although the exact assembly method depends on board layout and manufacturing capability. Typical uses include industrial sequence controllers, communication equipment, data-acquisition systems, test and measurement instruments, embedded gateways, and legacy 8051 peripheral controllers. The 40 I/O lines are particularly useful for machines requiring multiple digital inputs and outputs, while the external memory interface accommodates larger firmware than the on-chip RAM alone can hold. The serial port supports communication with sensors, converters, and service interfaces when the surrounding firmware provides the required protocol. Designers should allocate the external program-memory bus carefully because it affects board layout, address decoding, and memory timing. Decoupling capacitors should be placed directly beside the supply pins, while exposed clock and high-speed bus routes should remain short. Firmware must also account for the device's ROMless architecture and provide a valid external code-memory interface before operation. This product page combines the exact W78C438C40PL electrical and packaging characteristics with application guidance, compatibility boundaries, and design-oriented implementation notes. It distinguishes the exact 84-LCC device from related W78C438 variants and provides a practical framework for memory interfacing, peripheral expansion, and lifecycle-aware component selection.

RFQ İletişim
W78E051B40DL - 40MHz 8-Bit 8051 Microcontroller | Nuvoton
W78E051B40DL

W78E051B40DL - 40MHz 8-Bit 8051 Microcontroller | Nuvoton

Nuvoton Technology Corporation W78E051B40DL is an 8-bit 8051-compatible microcontroller with 4 KB of program memory, 128 bytes of RAM, 32 general-purpose I/O lines, and a 40 MHz maximum clock in a 40-DIP package. It operates from a 5 V supply and is designed for cost-sensitive embedded control applications requiring deterministic 8-bit processing, parallel digital I/O, and compact through-hole assembly. An 8051-compatible microcontroller is an embedded processing IC that executes a legacy 8051 instruction set while integrating flash program memory, static RAM, timers, serial communication, and parallel I/O. The W78E051B40DL belongs to the broader hierarchy of 8-bit microcontroller, embedded controller, integrated circuit, and semiconductor. Its standard 8051 compatibility simplifies the reuse of established instruction-level code, while flash memory permits in-circuit reprogramming and configuration flexibility. Key features include 4 KB of Flash EPROM, organized as 4K x 8, and 128 x 8 bits of RAM. Four bidirectional, bit-addressable 8-bit I/O ports provide up to 32 I/O pins. The device supports operation up to 40 MHz, enabling the processor and associated peripherals to service timing-sensitive control, communication, and data-handling tasks. Two software-selectable power-reduction modes help reduce energy use when the application does not require continuous processor activity. The W78E51B architecture is fully compatible with the standard 8051 instruction set. Idle mode stops the processor clock while allowing peripheral operation to continue, and power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped without affecting processor state, which can simplify sequencing and clock-control strategies in simple embedded systems. Typical applications include appliance controllers, small industrial control panels, keypad interfaces, LED indication systems, simple motor or relay controllers, and compact 8051-based instruments. Its parallel I/O is useful for discrete input sensing and output control, while its 5 V operation and 40-DIP package are well suited to through-hole educational, prototype, and legacy-control boards. When designing around the W78E051B40DL, preserve the oscillator and reset circuitry required by the selected clock architecture, and keep high-current loads away from port pins because the I/O current limits must be respected. Confirm the complete 40-pin signal map against the manufacturer datasheet before assigning board functions. Use idle mode when peripherals must continue operating but the core can pause, and use power-down mode when the lowest active-state consumption is more important than immediate restart speed. This product page combines the manufacturer-family characteristics, verified package and memory specifications, pinout-design guidance, application fit, and transparent comparison guidance. It is intended to help engineers determine whether the W78E051B40DL matches the required memory size, clock rate, package, power mode, and legacy 8051 software environment before beginning a PCB or firmware design.

RFQ İletişim
W78E051B40FL - 40MHz 8051 MCU, 4KB Flash | Nuvoton
W78E051B40FL

W78E051B40FL - 40MHz 8051 MCU, 4KB Flash | Nuvoton

Nuvoton Technology Corporation W78E051B40FL is a general-purpose 8-bit 8051-compatible microcontroller with 4KB of Flash program memory, 128 bytes of RAM, 36 I/O lines, and a maximum clock speed of 40MHz. The device is packaged in a 44-pin plastic quad flat package, identified as 44-BQFP or 44-PQFP in component listings. An 8051 microcontroller is an embedded processing platform that combines a CPU core, program memory, data memory, parallel I/O ports, timers, serial interfaces, and interrupt-control logic on one integrated circuit. The W78E051B40FL belongs to the 8-bit microcontroller hierarchy, where its standard 8051-compatible instruction set supports compact control systems, industrial controllers, data-acquisition modules, and embedded accessories. The principal device characteristics include 4KB of Flash EPROM, 128 bytes of internal RAM, four 8-bit bidirectional and bit-addressable I/O ports, and an additional 4-bit P4 port. Two 16-bit timer/counter blocks support timing, event counting, and periodic control tasks. Its operating speed reaches 40MHz, allowing the core to execute control sequences more quickly than the lower-clock members of the same 8051 family. The W78E051B series retains compatibility with the standard 8051 instruction set while using Flash rather than a one-time-programmable architecture. That combination preserves familiar compiler and assembly-code compatibility and supports firmware updates where the system's programming process permits reprogramming. The 128-byte RAM is modest, so designs requiring substantial buffers should use external data memory and divide work between the MCU and external components. Typical uses include industrial control panels, motor and relay controllers, instrumentation interfaces, sensor hubs, programmable logic controllers, communications modules, and compact embedded products. The 36 available I/O lines make the device suitable for systems that need multiple digital inputs and outputs, while the 40MHz clock provides additional execution margin for protocol handling and coordinated peripheral activity. The main design constraint is memory capacity. Firmware must fit within the 4KB program-memory limit, and frequently used variables should remain within the 128-byte RAM space. Board designers should also preserve a defined reset and oscillator implementation, validate every port's direction and pull configuration, and confirm the exact pin assignment and electrical limits against the manufacturer datasheet before layout release. This product page consolidates the W78E051B40FL's principal specifications, lifecycle information, package characteristics, replacement constraints, comparison data, and practical design guidance. It also distinguishes verified same-footprint options from broader 8051 alternatives that require additional engineering review.

RFQ İletişim
W78E051B40PL - 8-Bit 40MHz 8051 MCU | Nuvoton
W78E051B40PL

W78E051B40PL - 8-Bit 40MHz 8051 MCU | Nuvoton

Nuvoton Technology Corporation W78E051B40PL is an 8-bit W78 series microcontroller with 4KB (4K x 8) flash program memory, 128 x 8 RAM, 36 I/O pins, a 40MHz operating speed, and a 44-pin PLCC J-lead package. The device combines a compact 8051-compatible architecture with embedded flash memory for cost-sensitive embedded-control designs. A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, and I/O ports into one component. It executes embedded firmware to monitor inputs and control outputs. The W78 family belongs to the broader microcontroller hierarchy, combining an 8-bit processor core with embedded flash and general-purpose I/O for compact control systems. The W78E051B40PL provides 4KB of flash program memory, 128 bytes of RAM, and 36 I/O pins. Its 40MHz maximum speed supports faster instruction execution than lower-speed members of the 8-bit MCU class. The 44-pin PLCC package provides 36 externally accessible I/O functions together with power and control connections, while its J-lead geometry supports through-hole PCB assembly. The W78E051B40PL is identified as an 8-bit W78 microcontroller with 4KB flash and 128 bytes of data memory. This combination is suitable for firmware whose code footprint fits within 4KB and whose working data requirements remain within the available 128-byte RAM. Its 36 I/O pins also provide more external signal connections than many compact 8-bit controllers. Typical uses include small industrial controllers, appliance interfaces, keyboard or panel controllers, embedded timers, simple sequencers, and compact motor or relay control systems. The 36 available I/O pins can connect sensors, indicators, switches and control logic, while the embedded flash supports self-contained firmware execution without an external program-memory device. Designers should verify oscillator, reset, programming, and clock requirements against the manufacturer datasheet before layout. Because the device is supplied in a 44-pin J-lead PLCC package, PCB hole spacing and lead orientation must match the package drawing exactly. Firmware development should also account for the limited 4KB program-memory capacity and 128-byte RAM allocation. This product page consolidates the W78E051B40PL architecture, memory organization, package details, pin-compatible family candidates, application guidance, and design considerations into one engineering-focused reference. It also distinguishes confirmed device characteristics from parameters that require direct confirmation in the manufacturer documentation before schematic or PCB release.

RFQ İletişim