ADM211EARSZ vs ADM213ARSZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM211EARSZ tarafından Analog Devices ve ADM213ARSZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADM211EARSZ | ADM213ARSZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-232 line-driver and receiver transceiver | RS-232 line driver/receiver transceiver |
| Number of Drivers | 4 | 4 |
| Number of Receivers | 5 | 5 |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 230 kbps | 200 kbps |
| External Supply Capacitor | 0.1 µF | — |
| RS-232 Standards | EIA-232E and CCITT V.28 | — |
| Contact ESD Protection | ±8 kV | — |
| Air-Gap ESD Protection | ±15 kV | — |
| Human-Body-Model ESD Protection | ±15 kV | — |
| Paket | 28-pin SSOP | 28-pin SSOP |
| Package Width | 5.30 mm | — |
| Package Body Width | 0.209 inch | — |
| Packaging | Tube | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Besleme Gerilimi | — | 5 V |
| Receivers Active in Shutdown | — | 2 |
| Transmitter Output Swing | — | Approximately ±9 V |
| Receiver Input Voltage Tolerance | — | ±30 V |
| External Capacitor Range | — | 0.1 µF to 10 µF |
| Low-Power Shutdown Power | — | ≤5 µW |
| Low-Power Rating | — | 15 mW |
| Shutdown Control | — | Yes |
| Enable Control | — | Yes |
| Montaj Türü | — | Surface mount |
| Device Function | — | 4 transmitters and 5 receivers |
| Interface Standards | — | EIA-232-E and V.28 |
| RoHS Durumu | — | Compliant |
| Besleme Akımı | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |