ADM213ARS vs ADM213ARSZ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM213ARS tarafından Analog Devices ve ADM213ARSZ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADM213ARS | ADM213ARSZ |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-232 line transceiver | RS-232 line driver/receiver transceiver |
| Driver Channels | 4 | — |
| Receiver Channels | 5 | — |
| Besleme Gerilimi | +5 V | 5 V |
| Veri Hızı | 200 kBPS | — |
| Alternative Data Rate | 120 kB/s | — |
| External Charge Pump Capacitor | 0.1 µF | — |
| DC-DC Converter | Onboard | — |
| RS-232 Output Swing | ±9 V | — |
| Power Consumption | 15 mW | — |
| Shutdown Power | Less than 5 µW | — |
| Receivers Active in Shutdown | 2 | 2 |
| Receiver Input Level | 30 V | — |
| Latch-Up | Free | — |
| Supported Standards | EIA-232-E and V.28 | — |
| Paket | 28-SSOP | 28-pin SSOP |
| Package Width | 5.30 mm | — |
| Package Lead Span | 0.209 inch | — |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | Compliant |
| Maximum Data Rate | — | 200 kbps |
| Number of Drivers | — | 4 |
| Number of Receivers | — | 5 |
| Transmitter Output Swing | — | Approximately ±9 V |
| Receiver Input Voltage Tolerance | — | ±30 V |
| External Capacitor Range | — | 0.1 µF to 10 µF |
| Low-Power Shutdown Power | — | ≤5 µW |
| Low-Power Rating | — | 15 mW |
| Shutdown Control | — | Yes |
| Enable Control | — | Yes |
| Device Function | — | 4 transmitters and 5 receivers |
| Interface Standards | — | EIA-232-E and V.28 |
| Besleme Akımı | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |