AMIS30542 vs L6470H Karşılaştırma

Ayrıntılı yan yana karşılaştırma AMIS30542 tarafından onsemi ve L6470H tarafından STMicroelectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre AMIS30542 L6470H
Marka onsemi STMicroelectronics
Kategori Motor Drivers Motor Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Motor Type Bipolar stepper motor —
Çıkış Konfigürasyonu Dual H-bridge (4 half-bridges) —
Maximum Phase Current (RMS) 1500 mA —
Motor Supply Voltage (VBB) 6 V to 30 V —
Logic Supply Voltage (VDD) 3.3 V or 5 V —
Micro-Step Resolution Up to 1/32 step (programmable via SPI) —
On-Chip 5 V Regulator Output 5 V (for external MCU, up to ~50 mA) —
Communication Interface SPI (4-wire, plus NXT/DIR pins) —
Integrated Fly-back Diodes Yes (active fly-back) —
Thermal Protection Thermal warning + thermal shutdown —
Diagnostic Features Short-to-ground, short-to-supply, open-load detection —
SLA (Speed/Load Angle) Output Yes (transparent back-EMF monitor) —
İşletim Sıcaklığı Aralığı -40 C to +125 C -40 °C to +150 °C
Paket NQFP-32 (7x7 mm) HTSSOP-28 (PowerSO-28)
Montaj Türü Surface Mount Surface Mount
MSL Seviyesi 3 3 (168 hours)
RoHS Durumu Compliant Compliant
Supply Voltage Range — 8 V to 45 V
Output Current (Peak) — 3 A per phase
Output Current (RMS) — 2.1 A per phase
Microstepping Resolution — Up to 1/128 step
Control Interface — SPI
Motion Engine — dSPIN™ with programmable acceleration/deceleration
Protection Features — Overcurrent, overtemperature, undervoltage lockout
Thermal Resistance (θJA) — 25 °C/W
Logic Supply Voltage — 3.3 V or 5 V
Standby Current — 5 µA (typ)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin