ATMEGA8A-MN vs ATMEGA88V-10MJ Karşılaştırma
Ayrıntılı yan yana karşılaştırma ATMEGA8A-MN tarafından Microchip Technology ve ATMEGA88V-10MJ tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Microchip Technology
ATMEGA88V-10MJ - 8-Bit AVR MCU, 8KB Flash, 1.8-5.5V | Microchip
ATMEGA88V-10MJ ObsoleteÖzellik Karşılaştırması
| Parametre | ATMEGA8A-MN | ATMEGA88V-10MJ |
|---|---|---|
| Marka | Microchip Technology | Microchip Technology |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | Aktif | Obsolete |
| Core | AVR 8-bit RISC | — |
| Core Size | 8-Bit | 8-Bit |
| Azami Saat Hızı | 16 MHz | 10 MHz |
| Flash Memory Size | 8 KB (4K x 16) | — |
| EEPROM Size | 512 B | — |
| SRAM Size | 1 KB | — |
| Number of I/O | 23 | — |
| General Purpose Working Registers | 32 x 8-bit | — |
| Timers/Counters | 3 (two 8-bit, one 16-bit with compare modes) | — |
| Communication Interfaces | USART, SPI, TWI (I2C) | USART, SPI, Two-Wire (I2C-compatible) |
| ADC Resolution | 10-bit | — |
| Supply Voltage Range | 2.7 V to 5.5 V (VQFN 16 MHz grade) | — |
| İşletim Sıcaklığı | -40 C to +105 C | — |
| Paket / Kas | 32-VFQFN Exposed Pad (MLF 5x5 mm) | — |
| Montaj Türü | Surface Mount | Surface Mount |
| Programming Interface | ISP (SPI serial programming) | — |
| Sleep Modes | Idle, Power-down, Power-save | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby |
| RoHS Durumu | Compliant (Green) | — |
| Core Processor | — | AVR |
| Program Flash Memory | — | 8 KB |
| SRAM | — | 1 KB |
| EEPROM | — | 512 B |
| Operating Voltage Range | — | 1.8 V to 5.5 V |
| Throughput | — | Up to 10 MIPS at 10 MHz |
| GPIO Count | — | 23 |
| ADC Channels | — | 8 channels, 10-bit |
| Timers | — | 3 (two 8-bit, one 16-bit with compare modes) |
| Debug System | — | debugWIRE on-chip debug |
| Paket | — | 32-VQFN / MLF (32M1) |
| Instructions | — | 131 instructions, mostly single-cycle |