ATSAMD21J15B-MUT vs ATSAMD21J15B-AUT Karşılaştırma
Ayrıntılı yan yana karşılaştırma ATSAMD21J15B-MUT tarafından Microchip Technology ve ATSAMD21J15B-AUT tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Microchip Technology
ATSAMD21J15B-AUT - 32KB Flash 48MHz Cortex-M0+ MCU | Microchip
ATSAMD21J15B-AUT ✓ AktifÖzellik Karşılaştırması
| Parametre | ATSAMD21J15B-MUT | ATSAMD21J15B-AUT |
|---|---|---|
| Marka | Microchip Technology | Microchip Technology |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Core Architecture | ARM Cortex-M0+ (32-bit) | ARM Cortex-M0+ (32-bit) |
| Family | SAM D21J (Functional Safety - FuSa) | — |
| Maximum CPU Frequency | 48 MHz | — |
| CoreMark/MHz | 2.46 | — |
| Program Flash | 32 KB | — |
| SRAM | 4 KB | 4 KB |
| Paket | 64-QFN (9x9 mm) with EP | 64-pin TQFP (10 x 10 mm) |
| Besleme Gerilimi | 1.62 V to 3.63 V | — |
| İşletim Sıcaklığı | -40 C to +85 C (Industrial) | -40 C to +85 C (AUT suffix) |
| ADC | 12-bit, up to 14 channels | 12-bit, up to 20 channels, 350 ksps |
| DAC | 10-bit, 1 channel | 10-bit, 1 channel, 350 ksps |
| SERCOM | 6 channels (UART/SPI/I2C configurable) | — |
| USB | Full-speed USB 2.0 with on-chip transceiver | USB 2.0 Full-Speed Device with on-chip transceiver |
| Timers/Counters | TC (3x 16-bit), TCC (1x 24-bit) | — |
| RTC | Yes, with 32 kHz crystal support | — |
| Debug Interface | Serial Wire Debug (SWD), 2-pin | — |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 3 (168 hours) | — |
| RoHS Durumu | Compliant | Compliant (Green) |
| Azami Saat Hızı | — | 48 MHz |
| Program Flash Memory | — | 32 KB (32K x 8) |
| Operating Voltage Range | — | 1.62 V to 3.63 V |
| Supply Voltage (typical) | — | 3.3 V |
| I/O Pins | — | Up to 52 GPIO |
| Communication Interfaces | — | 6x SERCOM (UART/SPI/I2C), USB 2.0 Full-Speed Device, I2S |
| Timers | — | TC x3 (16-bit), TCC x2 (24-bit) |
| Touch | — | Peripheral Touch Controller (PTC) |
| Delivery Form | — | Tape & Reel (AUT) |