BQ4845S-A4G4 vs BQ4845S-A4NTRG4 Karşılaştırma

Ayrıntılı yan yana karşılaştırma BQ4845S-A4G4 tarafından Texas Instruments ve BQ4845S-A4NTRG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
BQ4845S-A4G4 BQ4845S-A4G4 - Parallel RTC with CPU Supervisor | TI

BQ4845S-A4G4 - Parallel RTC with CPU Supervisor | TI

BQ4845S-A4G4 Unknown
Texas Instruments
BQ4845S-A4NTRG4 BQ4845S-A4NTRG4 - 5V Parallel RTC with Supervisor | TI

BQ4845S-A4NTRG4 - 5V Parallel RTC with Supervisor | TI

BQ4845S-A4NTRG4 ✓ Aktif

Özellik Karşılaştırması

Parametre BQ4845S-A4G4 BQ4845S-A4NTRG4
Marka Texas Instruments Texas Instruments
Kategori Clock & Timing Clock & Timing
Yaşam Döngüsü Durumu Unknown Aktif
Product Type Real-time clock and calendar IC with CPU supervisor Parallel real-time clock and calendar with CPU supervisor
Clock Interface Parallel —
Timekeeping Crystal Frequency 32.768 kHz —
Backup Battery 3 V —
Calendar Range 100 years 100 years
Paket 28-SOIC, 0.295 inch width, 7.50 mm 28-pin SOIC, 7.50 mm width
Montaj Türü Surface mount Surface mount
Supervisor Functions CPU supervisor and watchdog timer —
Alarm and Interrupt Functions Alarm and interrupt functions —
External Memory Control Conditional chip-enable output CEOUT —
Battery Monitoring Battery voltage output VOUT —
Backup Retention Maintains external SRAM information in the absence of system voltage —
System-Level Use Battery-backed system timing and power-failure monitoring —
İşletim Sıcaklığı Aralığı [DATA_NEEDED: Operating temperature range] [DATA_NEEDED: operating temperature range]
Supply Voltage Range [DATA_NEEDED: Supply voltage range] —
Durağan Akım [DATA_NEEDED: Quiescent current] —
Timekeeping Accuracy [DATA_NEEDED: Timekeeping accuracy] —
RoHS Durumu [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Main Supply Voltage Range — 4.75 V to 5.5 V
Backup Battery Voltage Range — 2.3 V to 4 V
Crystal Frequency — 32.768 kHz
Clock Format — BCD
Date Format — BCD
Host Interface — Parallel
Operating Features — Alarm, daylight-saving time, leap year, watchdog timer, processor reset, interrupt, and battery-low warning
Backup Clock Operating Current — Less than 500 nA
Watchdog Input Bias — Approximately 1.6 V through a 100 kilohm-equivalent internal resistor network
Battery Voltage Output — VOUT output available
External SRAM Control — CEOUT write-protection output available
Power-Fail Behavior — Watchdog disabled and WDI disconnected from the internal resistor network below the power-fail threshold
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin