CC115LRGPR vs CC110LRGPR Karşılaştırma
Ayrıntılı yan yana karşılaştırma CC115LRGPR tarafından Texas Instruments ve CC110LRGPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | CC115LRGPR | CC110LRGPR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | RF Transceivers | RF Transceivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Sub-1 GHz RF Transmitter | — |
| Frequency Bands | 300-348 MHz, 387-464 MHz, 779-928 MHz | — |
| Typical ISM Bands | 315 MHz, 433 MHz, 868 MHz, 915 MHz | — |
| Modulation Formats | FSK, GFSK, OOK | — |
| Maximum Output Power | 12 dBm | — |
| Maximum Data Rate | 600 kbps | [DATA_NEEDED: maximum data rate] |
| RF Architecture | Based on CC1101 transceiver, TX-only | — |
| Wake-to-TX Latency | Approx. 240 us | — |
| Host Interface | SPI (SCLK, SI, SO, CSn) | — |
| Besleme Gerilimi | [DATA_NEEDED: supply voltage range] | 1.8 V to 3.6 V |
| Paket | 20-VQFN (RGP) Exposed Pad | 20-VFQFN (RGP) with exposed pad |
| Pin Sayısı | 20 | — |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı | -40C to +85C | -40C to +85C |
| Receiver | None (pair with CC113L receiver) | — |
| Antenna | Differential RF_N / RF_P, PCB or SMD antenna | — |
| Compliance References | EN 300 220, FCC Part 15 (system-level design) | — |
| Frequency Range | — | 300-348 MHz, 387-464 MHz, 779-928 MHz |
| Fonksiyon | — | RF Transceiver (TxRx) |
| Modulation | — | 2-FSK, GFSK, MSK |
| Sensitivity | — | -120 dBm |
| Arayüz | — | SPI (SCLK, SI, SO, CSn) |
| Band | — | ISM/SRD < 1 GHz |
| Product Family | — | CC110L Value Line (based on CC1101) |
| General Purpose Outputs | — | GDO0, GDO1, GDO2 (configurable) |
| Packet Engine | — | Integrated packet handling with FIFOs |
| RoHS Durumu | — | Compliant |
| Klorürsüz | — | Compliant |
| Country of Origin | — | Philippines |
| TX Output Power | — | [DATA_NEEDED: maximum TX output power] |