DG441DJZ vs DG442CJ+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma DG441DJZ tarafından Renesas Electronics ve DG442CJ+ tarafından Maxim IntegratedAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | DG441DJZ | DG442CJ+ |
|---|---|---|
| Marka | Renesas Electronics | Maxim Integrated |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Switch Configuration | Quad SPST, Normally Closed | 1:1 SPST |
| Number of Channels | 4 | — |
| On-Resistance (Max) | 85 ohm | — |
| Supply Voltage Range | 5 V to 34 V (total supply) | — |
| Typical Supply | +/-15 V | — |
| Logic Compatibility | TTL and CMOS | — |
| Signal Direction | Bidirectional | — |
| Internal Voltage Reference | Yes (for logic thresholds) | — |
| Paket | 16-PDIP | 16-PDIP |
| Montaj Türü | Through Hole | Through hole |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | — |
| Switch Time (tON/tOFF) | [DATA_NEEDED: switching time] | — |
| Off-Leakage Current | [DATA_NEEDED: off-leakage current] | 500 pA |
| On-Leakage Current | [DATA_NEEDED: on-leakage current] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | unknown |
| Drop-In Replacement For | DG201A / DG202 series | — |
| Number of Circuits | — | 4 circuits |
| Contact State | — | Normally open |
| On-Resistance | — | 85 ohm |
| On-Resistance Matching | — | 4 ohm maximum between switches |
| On-Resistance Flatness | — | 9 ohm maximum over the signal range |
| Signal Conduction | — | Bidirectional |
| Switching Behavior | — | Break-before-make |
| Switching Time | — | 170 ns and 250 ns |
| Technology | — | CMOS |
| Besleme Gerilimi | — | 15 V maximum |
| Pin Sayısı | — | 16 pins |
| Package Width | — | 7.62 mm (0.300 inch) |
| Temperature Grade | — | Commercial grade |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Channel-to-Channel Isolation | — | [DATA_NEEDED: channel-to-channel isolation] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |