DRV8873HPWPR vs DRV8886ATPWPR Karşılaştırma
Ayrıntılı yan yana karşılaştırma DRV8873HPWPR tarafından Texas Instruments ve DRV8886ATPWPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ AktifTexas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ AktifÖzellik Karşılaştırması
| Parametre | DRV8873HPWPR | DRV8886ATPWPR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Motor Type | Brushed DC | Bipolar stepper (2-phase) |
| Ağ Yapısı | H-Bridge (4 N-channel MOSFETs) | — |
| Supply Voltage (VM) | 4.5 V to 38 V | — |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | STEP / DIR (indexer built-in) |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| İşletim Sıcaklığı | -40 C to +125 C | -40 C to +125 C |
| Paket | 24-pin HTSSOP (PWP) with PowerPAD | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 3 (168 hr / 260 C) | 2 |
| RoHS Durumu | Compliant | — |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Number of Half-Bridges | — | 4 (2 H-bridges) |
| Operating Supply Voltage (VM) | — | 8 V to 37 V |
| Maximum Full-Scale Output Current | — | 2 A |
| RMS Output Current (24 V, TA = 25 C) | — | 1.4 A |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Microstepping Levels | — | 1, 2, 4, 8, 16, 32 (up to 1/16 native) |
| Current Sensing | — | Integrated (no external sense resistors) |
| Decay Mode | — | AutoTune (smart-tune, adaptive mixed decay) |
| RDS(on) per FET (typ) | — | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet |
| Protection Features | — | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) |
| Sleep Current | — | [DATA_NEEDED: nSLEEP quiescent current] |
| RoHS / Pb-Free | — | Yes (compliant) |