EPC1441PI8N vs EPC1441PS8 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC1441PI8N tarafından Altera ve EPC1441PS8 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC1441PI8N | EPC1441PS8 |
|---|---|---|
| Marka | Altera | Intel |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | Son Alış Zamanı | NRND |
| Bellek Türü | OTP Configuration PROM (poly-fuse) | One-Time-Programmable Flash |
| Memory Capacity | 440,800 bits (440 Kbit) | — |
| Configuration Interface | Altera Serial (PS) configuration | — |
| Supply Voltage VCC | 5.0 V nominal (4.75 V to 5.25 V) | — |
| Active Supply Current ICC | [DATA_NEEDED: typical active ICC] | — |
| Standby Supply Current ICCSTBY | approximately 50 uA | — |
| Programming Method | Off-board PROM programmer (poly-fuse OTP) | — |
| Configuration Time | <100 ms typical for FLEX10KA loading | — |
| İşletim Sıcaklığı | -40C to +85C (industrial) | — |
| Paket | 8-pin PDIP (Plastic DIP, through-hole) | SOIC-8 (PS8, 150-mil body) |
| Pin Sayısı | 8 | — |
| Montaj Türü | Through-hole (THT) | Surface Mount |
| Lead-Free / RoHS | Non-RoHS (legacy through-hole); check suffix for Pb-free option | — |
| Compatible FPGA Families | FLEX10K, FLEX10KA, FLEX6000, APEX20K series | APEX II, APEX 20K (including 20K, 20KC, 20KE), Mercury, ACEX 1K, FLEX 6000, FLEX 10KE, FLEX 10KA |
| Family Position | Top-of-family (largest density: 440Kb) | — |
| Programming Voltage | [DATA_NEEDED: VPP programming voltage] | — |
| Endurance | One-time programmable (no reprogram cycles) | — |
| Product Type | — | Enhanced Configuration PROM (serial configuration memory) |
| Memory Density | — | 440 Kbit |
| Arayüz | — | 4-pin serial (nCS, OE, DATA, DCLK) |
| Besleme Gerilimi | — | 3.3 V typical (compatible with Altera FPGAs) |
| Configuration Controller | — | Built-in (handles address counter, oscillator, tri-state DATA) |
| Output Driver | — | Tri-state on DATA pin |
| Configuration Speed | — | Higher DCLK rates vs legacy EPC PROMs (per Altera datasheet) |
| DC Input Absolute Min | — | -0.3 V (with -2.0 V undershoot tolerance < 20 ns) |
| DC Input Absolute Max | — | 7.0 V (with overshoot tolerance < 20 ns) |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| RoHS Durumu | — | unknown |
| Programmability | — | OTP (one-time-programmable) |