EPC1LLC20 vs EPC1PC8CC Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC1LLC20 tarafından Intel ve EPC1PC8CC tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC1LLC20 | EPC1PC8CC |
|---|---|---|
| Marka | Intel | Intel |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | Obsolete | Obsolete |
| Bellek Türü | Serial Configuration Flash | EPROM (OTP, UV-erasable window optional) |
| Bellek Boyutu | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Arayüz | Altera Serial Configuration (4-wire) | — |
| Serial Clock Frequency | 8 MHz maximum | — |
| Supply Voltage (VCC) | 2.7 V to 3.6 V (3.3 V typical) | — |
| Paket | 20-pin PLCC (LLC) | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) |
| Programming Cycles Endurance | 100,000 cycles minimum | — |
| Data Retention | 20 years minimum | — |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | — |
| Programming Mode | In-system via serial interface | — |
| Configuration Compatibility | Altera FLEX, ACEX, APEX, Cyclone, Mercury | — |
| Montaj Türü | Surface Mount (PLCC socket or solder) | Through-Hole (DIP socketable) |
| Lead-Free / RoHS | [DATA_NEEDED: RoHS compliance status] | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant |
| MSL Seviyesi | [DATA_NEEDED: MSL moisture sensitivity level] | 1 (unlimited floor life) |
| Standby Current | [DATA_NEEDED: standby current] | — |
| Fonksiyon | — | FPGA Configuration PROM |
| Configuration Interface | — | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Maximum DCLK Frequency | — | 17.6 MHz (17.6 Mb/s effective bitstream rate) |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: full industrial range from datasheet] |
| Cascade Support | — | Not supported in DIP-8 package (nCASC pin not exposed) |
| Programming Interface | — | JTAG via Altera Quartus / Quartus Prime ByteBlaster |
| Error Detection | — | Built-in CRC during configuration transfer |
| Compatible FPGA Families | — | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria |
| Pin Sayısı | — | 8 |