EPC2TC32UCF48 vs EPC2TC32UCAF Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC2TC32UCF48 tarafından Intel ve EPC2TC32UCAF tarafından AlteraAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC2TC32UCF48 | EPC2TC32UCAF |
|---|---|---|
| Marka | Intel | Altera |
| Kategori | Memory ICs | FPGA & CPLD |
| Yaşam Döngüsü Durumu | NRND | Obsolete |
| Bellek Türü | Non-volatile configuration PROM (CMOS Flash-based) | — |
| Memory Density | 1.6 Mbit (1.6 Mb / 32 Mbit raw) | 1.6 Mbit |
| Memory Configuration | Serial configuration bitstream storage | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | 3.0 V to 3.6 V |
| Supply Voltage (VCCIO) | 1.8 V / 2.5 V / 3.3 V (bank-level) | — |
| Output Drive Current (VCCIO) | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] | — |
| Programming Interface | IEEE Std. 1149.1 JTAG (in-system programmable) | IEEE 1149.1 (JTAG) in-system programmable |
| Configuration Interface | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) | FLEX passive serial / passive parallel synchronous / passive parallel asynchronous |
| Supported Configuration Modes | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) | — |
| Daisy Chain Support | Yes (multi-device cascade for >16 Mbit FPGAs) | — |
| Maximum Cascaded Capacity | Up to 16 Mbit total across chain | — |
| İşletim Sıcaklığı | 0C to +70C (commercial) | [DATA_NEEDED: operating temperature range] |
| Paket | 48-pin TQFP (7x7 mm) | 32-pin TQFP (CAF48), 7x7 mm |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| RoHS Durumu | [DATA_NEEDED: confirm RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| Lead Free | [DATA_NEEDED: confirm lead-free] | — |
| Device Type | — | Configuration PROM (CPLD-style boot memory) |
| Supported FPGA Families | — | Altera APEX, Cyclone, Stratix, FLEX (LUT devices) |
| I/O Logic Levels | — | 3.3 V / 2.5 V compatible |
| Daisy-Chain Support | — | Yes (via nCASC pin, multi-device FLEX chain) |
| Compression Support | — | Altera bitstream compression compatible |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |
| Klorürsüz | — | [DATA_NEEDED: halogen-free status] |