IFX007TAUMA1 vs IFX9201SGAUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma IFX007TAUMA1 tarafından Infineon ve IFX9201SGAUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | IFX007TAUMA1 | IFX9201SGAUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Motor Drivers | Motor Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Half-Bridge Motor Driver (H-Bridge half) | — |
| Ağ Yapısı | High-side P-MOSFET + Low-side N-MOSFET with integrated driver | Full H-Bridge (2 half-bridges) |
| Supply Voltage Range | 5.5 V to 40 V | 5 V to 36 V |
| Continuous Load Current | 40 A (typical application) | — |
| MOSFET RDS(on) (typical) | 12.8 mΩ (per switch) | — |
| Logic Input HIGH (IN high) | 1.6 V to 2.0 V | — |
| Logic Input LOW (IN low) | 1.1 V to 1.3 V | — |
| PWM Frequency (max) | 25 kHz | 25 kHz |
| İşletim Sıcaklığı Aralığı | -40 °C to +150 °C (junction) | — |
| Protection Features | Over-temperature, over-current latch, under-voltage lockout, short-circuit | UVLO, OCP, OTP, short-circuit, open-load detection |
| Status Output | Yes (open-drain fault flag) | — |
| Current Sensing | Integrated via low-side RDS(on) sensing (no shunt required) | — |
| Paket | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab | PG-DSO-12-17 (12-BSOP with Exposed Pad) |
| Pin Sayısı | 7 + Tab | — |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL level] |
| RoHS Durumu | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified (per product family) | — |
| Continuous Output Current | — | 6 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) per Switch (typ) | — | [DATA_NEEDED: RDS(on)] |
| Control Interface | — | PWM, DIR, SPI diagnostics |
| SPI Clock Frequency (max) | — | 4 MHz |
| Operating Temperature Range (TJ) | — | -40 C to +125 C |
| Target Applications | — | DC motors, inductive loads, power tools, home appliances, building automation |