INA114AU vs INA131BP Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA114AU tarafından Texas Instruments ve INA131BP tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA114AU | INA131BP |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Single-amplifier precision instrumentation amplifier | Precision instrumentation amplifier |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Noise | 11 nV/√Hz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Overvoltage Protection | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Maximum Quiescent Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Slew Rate | 0.06 V/µs | 0.7 V/µs |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Paket | 16-pin SOIC, 3.9 mm wide | — |
| Montaj Türü | Surface mount | — |
| Internal Architecture | Three-op-amp instrumentation amplifier | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Internal Amplifier Count | — | 3 amplifiers |
| Nominal Gain | — | 100 V/V |
| Gain Configuration | — | Fixed gain |
| Supply Voltage Range | — | 2.25 V to 18 V |
| Maximum Total Supply Voltage | — | 50 V |
| Signal Bandwidth | — | 70 kHz |
| Adjustment Method | — | On-chip laser trimming |
| Number of Circuits | — | 1 circuit |
| Package Type | — | 8-pin PDIP |
| Pin Sayısı | — | 8 pins |
| Montaj Stili | — | Through-hole |
| Temperature Grade | — | Industrial grade |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power Supply Rejection Ratio | — | [DATA_NEEDED: power supply rejection ratio] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |