INA2132U vs INA2132UA Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA2132U tarafından Texas Instruments ve INA2132UA tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA2132U | INA2132UA |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Number of Channels | 2 channels | 2 channels |
| Device Type | Dual, low-power, single-supply difference amplifier | — |
| Minimum Supply Voltage | 2.7 V | — |
| Maximum Supply Voltage | 36 V | — |
| Minimum Common-Mode Rejection Ratio | 76 dB | — |
| Minimum Common-Mode Input Voltage | -15 V | — |
| Maximum Common-Mode Input Voltage | 28 V | — |
| Gain Bandwidth Product | 300 kHz | — |
| İşletim Sıcaklığı Aralığı | -40 °C to 85 °C | -40 °C to +85 °C |
| Paket | 14-pin SOIC (D), 0.154 in body width, 3.90 mm nominal width | 14-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Supply Type | Single supply | Single supply |
| Input Offset Voltage | [DATA_NEEDED: maximum input offset voltage] | [DATA_NEEDED: maximum input offset voltage] |
| Durağan Akım | [DATA_NEEDED: quiescent current per amplifier channel] | [DATA_NEEDED: quiescent current per channel] |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing under specified load] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance declaration] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance declaration] | — |
| Amplifier Type | — | Dual low-power single-supply difference amplifier |
| Supply Voltage Range | — | 2.7 V to 36 V |
| Total Supply Voltage | — | 36 V maximum |
| Common-Mode Rejection | — | 76 dB minimum |
| Common-Mode Input Range | — | -15 V to 28 V |
| Gain Bandwidth | — | Approximately 3 MHz |
| Gain | — | 1 dB |
| Package Type | — | SO-14 surface-mount package |
| Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| RoHS Durumu | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |