L272D2 vs L272D013TR Karşılaştırma
Ayrıntılı yan yana karşılaştırma L272D2 tarafından onsemi ve L272D013TR tarafından STMicroelectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
STMicroelectronics
L272D013TR - 16V 250kHz Dual Power Op Amp | STMicroelectronics
L272D013TR ✓ AktifÖzellik Karşılaştırması
| Parametre | L272D2 | L272D013TR |
|---|---|---|
| Marka | onsemi | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | High-power dual operational amplifier | Dual power operational amplifier |
| Number of Channels | 2 channels | — |
| Maksimum Çıkış Akımı | 0.7 A | — |
| Minimum Supply Voltage | 4 V | — |
| Maximum Total Supply Voltage | 28 V (±14 V) | — |
| Low Saturation Voltage | [DATA_NEEDED: Low saturation voltage at 0.5 A output and 1.5 V output] | — |
| Thermal Shutdown Temperature | 160 °C | — |
| Input Type | Ground-compatible differential inputs | — |
| Common-Mode Input Range | [DATA_NEEDED: Common-mode input voltage range] | — |
| Differential Input Range | [DATA_NEEDED: Differential input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: Input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | [DATA_NEEDED: Gain-bandwidth product] | 250 kHz |
| Slew Rate | [DATA_NEEDED: Slew rate] | 1 V/µs |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Paket | 16-pin SOIC | 16-pin SO, 3.90 mm width |
| Montaj Türü | Surface mount | Surface mount |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Circuits | — | 2 circuits |
| Supply Voltage Range | — | 4 V to 28 V |
| Output Current | — | 0.7 A maximum per amplifier |
| Application Category | — | General-purpose power amplifier |
| Intended Load | — | Low-impedance loads |
| Output Architecture | — | Power operational amplifier |
| Termal Direnç | — | [DATA_NEEDED: package thermal resistance] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Voltage | — | [DATA_NEEDED: output swing voltage] |