LM211DR2G vs LM211DR Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM211DR2G tarafından onsemi ve LM211DR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM211DR2G | LM211DR |
|---|---|---|
| Marka | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Single general-purpose voltage comparator | Single high-speed differential comparator |
| Supply Voltage Range, Single Supply | 5 V to 30 V | — |
| Supply Voltage Range, Split Supply | ±15 V | — |
| Response Time | 200 ns | 115 ns |
| İşletim Sıcaklığı Aralığı | -25 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Çıkış Türü | Open collector | Open-collector / open-emitter |
| Logic Compatibility | DTL, MOS, open-emitter, open-collector, RTL, and TTL | DTL, MOS, RTL, and TTL |
| Number of Comparators | 1 | — |
| Input Isolation | Inputs may be isolated from system ground with split supplies | — |
| Output Reference Flexibility | Loads may be referenced to ground, VCC, or VEE | — |
| Output Drive Capability | Capable of driving lamps and relays | Lamp or relay switching |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Supply Voltage Range | — | 3.5 V to 30 V |
| Positive Logic Supply Example | — | 5 V |
| Dual-Supply Example | — | ±15 V |
| Input Configuration | — | Differential |
| Comparator Quantity | — | 1 comparator |
| Strobe Function | — | Differential comparator with strobe |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |