LM2902DRE4 vs LM2902QDRQ1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2902DRE4 tarafından Texas Instruments ve LM2902QDRQ1 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2902DRE4 | LM2902QDRQ1 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | General Purpose | — |
| Number of Amplifier Channels | 4 circuits | — |
| Maximum Supply Voltage | 26 V | 26 V |
| Single-Supply Operating Range | Up to 26 V | — |
| Dual-Supply Operating Range | ±13 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV typical | 2 mV |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Supply Current Drain | 0.8 mA typical | — |
| İşletim Sıcaklığı Aralığı | -40 °C to +125 °C | — |
| Paket | 14-SOIC | 14-pin SOIC (D) |
| Package Width | 3.90 mm | — |
| Package Body Width | 0.154 mm | — |
| Montaj Türü | Surface Mount | Surface mount |
| Packaging | Tape and Reel | — |
| Pin Sayısı | 14 pins | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 4 independent amplifiers |
| Product Type | — | Quad operational amplifier |
| Minimum Supply Voltage | — | 3 V |
| Output Current per Channel | — | 60 mA |
| Supply Current per Channel | — | 1.4 mA |
| İşletim Sıcaklığı | — | -40°C to 125°C |
| Automotive Qualification | — | Qualified |
| Compensation | — | Internal frequency compensation |
| Lead Pitch | — | [DATA_NEEDED: lead pitch] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |