LM2902KVQDR vs LM2902DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2902KVQDR tarafından Texas Instruments ve LM2902DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2902KVQDR | LM2902DG |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Quad general-purpose operational amplifier | — |
| Number of Amplifiers | 4 amplifiers | — |
| Number of Circuits | 4 circuits | — |
| Maximum Supply Voltage | 30 V | 32 V |
| Gain-Bandwidth Product | 1.2 MHz | 1 MHz |
| Improved ESD Protection | 2 kV | — |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Paket | 14-pin SOIC | — |
| Montaj Türü | Surface mount | Surface mount |
| Input Offset Voltage | 600 µV typical | [DATA_NEEDED: input offset voltage] |
| Common-Mode Input Range | To ground | — |
| Differential Input Voltage Capability | High differential input voltage capability | — |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Channel Independence | 4 independent amplifiers | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Quad operational amplifier |
| Number of Amplifier Channels | — | 4 channels |
| Amplifier Category | — | General purpose |
| Slew Rate | — | 0.6 V/µs |
| Minimum Supply Voltage | — | 3 V |
| Input Type | — | True differential inputs |
| Supply Style | — | Single supply |
| Package Type | — | SOIC-14 |
| Total Pin Count | — | 14 pins |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Durağan Akım | — | [DATA_NEEDED: quiescent current] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |