LM2902KVQDRQ1 vs LM2902WYDT Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2902KVQDRQ1 tarafından Texas Instruments ve LM2902WYDT tarafından STMicroelectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2902KVQDRQ1 - 26V Quad Automotive Op Amp | Texas Instruments
LM2902KVQDRQ1 ✓ AktifÖzellik Karşılaştırması
| Parametre | LM2902KVQDRQ1 | LM2902WYDT |
|---|---|---|
| Marka | Texas Instruments | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Count | 4 channels | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.3 MHz |
| Input Offset Voltage | 2 mV | [DATA_NEEDED: input offset voltage] |
| Common-Mode Rejection Ratio | 80 dB | — |
| Slew Rate | 0.5 V/µs | [DATA_NEEDED: slew rate] |
| Input Bias Current | -0.5 µA | 2 nA |
| İşletim Sıcaklığı Aralığı | -55 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Nominal Test Supply Voltage | 5 V | — |
| Pin Sayısı | 14 pins | — |
| Paket | 14-SOIC | 14-SO |
| Montaj Türü | Surface mount | Surface mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Operating Mode | Single supply or split supply | — |
| Frequency Compensation | Internal | Internal |
| Amplifier Type | General purpose | Standard general-purpose operational amplifier |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | RoHS compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Standard Packaging Quantity | [DATA_NEEDED: standard packaging quantity] | — |
| Number of Amplifiers | — | 4 circuits |
| Open-Loop Gain | — | 100 dB |
| Besleme Akımı | — | 375 uA |
| Input Offset Current | — | 20 nA |
| Maximum Differential Input Voltage | — | 800 V |
| Çıkış Türü | — | Push-pull |
| Number of Independent Amplifiers | — | 4 independent amplifiers |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |