LM2903PWR vs LM2903QPWRQ1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903PWR tarafından Texas Instruments ve LM2903QPWRQ1 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
LM2903QPWRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QPWRQ1 ✓ AktifÖzellik Karşılaştırması
| Parametre | LM2903PWR | LM2903QPWRQ1 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Çıkış Türü | Open-collector | Open-collector, rail-to-rail |
| Input Common-Mode Range | Rail-to-rail | — |
| Supply Voltage Range | ±18V / 36V total | — |
| Maximum Rating of LM2903B Family | Up to 38V | — |
| Input Offset Voltage | 0.37mV maximum | — |
| Input Bias Current | 3.5nA maximum | 25 nA typical |
| Besleme Akımı | 200µA per comparator | 0.4 mA typical per comparator |
| Response Time | 1µs | — |
| ESD Rating | 2kV HBM | — |
| Paket | 8-pin TSSOP | TSSOP (PW), 8 pins |
| Montaj Türü | Surface mount | Surface mount |
| RoHS Durumu | RoHS Compliant | [DATA_NEEDED: RoHS status] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40°C to 125°C |
| Standard Qty | [DATA_NEEDED: standard reel quantity] | — |
| Maximum Supply Voltage | — | 36 V |
| Supply Configuration | — | Single or dual supply |
| Input Offset Current | — | 3 nA typical |
| Automotive Qualification | — | AEC-Q100 Grade 0 and Grade 1 |
| Supply Current Drain | — | Independent of supply voltage |
| ESD Performance | — | 2 kV HBM for the LM2903B-Q1 family |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict Minerals Status | — | [DATA_NEEDED: conflict minerals status] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended output pull-up resistor] |