LM2904BIDR vs LM2904DG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2904BIDR tarafından Texas Instruments ve LM2904DG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2904BIDR | LM2904DG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Manufacturer | Texas Instruments | — |
| Fonksiyon | Industry-standard dual operational amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Supply Voltage Range (Single) | 3 V to 36 V | — |
| Supply Voltage Range (Dual) | +/-1.5 V to +/-18 V | — |
| Gain-Bandwidth Product (GBW) | 1.2 MHz | — |
| Slew Rate | 0.5 V/us (typical) | 0.3 V/µs |
| Input Offset Voltage | 0.5 mV typical / 3 mV maximum | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | GND to VCC - 1.5 V (single supply) | — |
| Output Swing | Rail-to-rail output | — |
| İşletim Sıcaklığı Aralığı | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-8 (D) | 8-SOIC (0.154, 3.90 mm width) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 1 (Unlimited) | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 2 |
| Maximum Supply Voltage | — | 26 V |
| Single-Supply Operation | — | Up to 26 V |
| Dual-Supply Operation | — | Up to ±13 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Supply-Current Drain | — | 0.7 mA typical |
| Supply-Current Independence | — | Independent of supply voltage |
| Common-Mode Input Range | — | Includes ground |
| Packaging | — | Tube |
| Open-Loop Voltage Gain | — | [DATA_NEEDED: open-loop voltage gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |