LM324ADR2G vs LM324J Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM324ADR2G tarafından onsemi ve LM324J tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM324ADR2G | LM324J |
|---|---|---|
| Marka | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | General Purpose | General-purpose operational amplifier |
| Number of Circuits | 4 | — |
| Supply Voltage Range (Single) | 3 V to 32 V | — |
| Supply Voltage Range (Split) | ±1.5 V to ±16 V | — |
| Gain Bandwidth Product | 1 MHz | — |
| Slew Rate | 0.6 V/µs | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Max) | 3 mV | — |
| Input Offset Voltage (Typ) | [DATA_NEEDED: Input Offset Voltage typical] | — |
| Technology | Bipolar | — |
| Paket / Kas | 14-SOIC (0.154in, 3.90mm Width) | — |
| Montaj Türü | Surface Mount | Through-hole |
| İşletim Sıcaklığı | 0C to +70C (Commercial) | — |
| Packaging | Tape & Reel (R2G suffix) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Supply Current (per amp, typical) | [DATA_NEEDED: Supply Current] | — |
| Number of Amplifiers | — | 4 channels |
| Maximum Supply Voltage | — | 32 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Supply Configuration | — | Single-supply operation |
| Power Class | — | Low power |
| Device Type | — | Military quad operational amplifier |
| Paket | — | 14-CDIP |
| Pin Sayısı | — | 14 pins |
| Package Material | — | Ceramic |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |