LM358DRG4 vs NCV2904DR2G Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM358DRG4 tarafından Texas Instruments ve NCV2904DR2G tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM358DRG4 | NCV2904DR2G |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | General Purpose | General Purpose Operational Amplifier |
| Number of Circuits | 2 | 2 |
| Number of Amplifiers | 2 | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | — |
| Supply Voltage Range | ±1.5 V to ±16 V | — |
| Paket | 8-SOIC | SOIC-8 (Case 751, D suffix) |
| Pin Sayısı | 8 | — |
| Montaj Türü | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | Low input bias current |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Voltage (Single Supply) | — | 3.0 V to 26 V |
| Supply Voltage (Split Supply) | — | +/-1.5 V to +/-13 V |
| Common Mode Input Range | — | Extends to ground/VEE |
| Output | — | Short circuit protected |
| Input Stage | — | True differential input |
| Compensation | — | Internally compensated |
| ESD Protection | — | ESD clamps on inputs |
| Power Drain | — | Low power drain |
| Qualification | — | NCV automotive grade |