LM393N vs LM393NG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM393N tarafından Texas Instruments ve LM393NG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM393N | LM393NG |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual General-Purpose Comparator | — |
| Number of Comparators | 2 (dual) | — |
| Çıkış Türü | Open-Collector / Open-Drain (single-ended) | Open-collector |
| Input Offset Voltage (max) | 5 mV (LM393N); 2 mV (LM193/LM393A grade) | — |
| Input Bias Current (typ) | 25 nA | — |
| Supply Voltage Range (single supply) | 2 V to 36 V | — |
| Supply Voltage Range (dual supply) | ±1 V to ±18 V | — |
| Output Sink Current (max) | 16 mA | — |
| Propagation Delay (typ) | 1.3 us (300 mV overdrive) | — |
| Common-Mode Input Range | 0 V to VCC - 1.5 V (ground sensing) | — |
| Quiescent Current (typ) | 0.4 mA per comparator (0.8 mA total) | — |
| İşletim Sıcaklığı Aralığı | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) | [DATA_NEEDED: Operating temperature range] |
| Paket | 8-PDIP (DIP-8, through-hole) | 8-pin PDIP |
| Montaj Türü | Through-Hole | Through-hole |
| RoHS Durumu | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant | [DATA_NEEDED: RoHS status] |
| Comparator Count | — | 2 independent comparators |
| Product Type | — | Precision voltage comparator |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | As low as 2.0 mV |
| Input Current | — | 250 nA |
| Differential Input Voltage Range | — | -38 V to +38 V |
| Single-Supply Operation | — | Supported |
| Split-Supply Operation | — | Supported |
| Single-Supply Common-Mode Range | — | Includes ground |
| Temperature Grade | — | Commercial |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Output Saturation Voltage | — | [DATA_NEEDED: Output saturation voltage] |