LM393NG vs LM393N Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM393NG tarafından onsemi ve LM393N tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM393NG | LM393N |
|---|---|---|
| Marka | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Count | 2 independent comparators | — |
| Product Type | Precision voltage comparator | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Çıkış Türü | Open-collector | Open-Collector / Open-Drain (single-ended) |
| Paket | 8-pin PDIP | 8-PDIP (DIP-8, through-hole) |
| Montaj Türü | Through-hole | Through-Hole |
| Input Offset Voltage | As low as 2.0 mV | — |
| Input Current | 250 nA | — |
| Differential Input Voltage Range | -38 V to +38 V | — |
| Single-Supply Operation | Supported | — |
| Split-Supply Operation | Supported | — |
| Single-Supply Common-Mode Range | Includes ground | — |
| Temperature Grade | Commercial | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Output Saturation Voltage | [DATA_NEEDED: Output saturation voltage] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: Operating temperature range] | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant |
| Comparator Type | — | Dual General-Purpose Comparator |
| Number of Comparators | — | 2 (dual) |
| Input Offset Voltage (max) | — | 5 mV (LM393N); 2 mV (LM193/LM393A grade) |
| Input Bias Current (typ) | — | 25 nA |
| Supply Voltage Range (single supply) | — | 2 V to 36 V |
| Supply Voltage Range (dual supply) | — | ±1 V to ±18 V |
| Output Sink Current (max) | — | 16 mA |
| Propagation Delay (typ) | — | 1.3 us (300 mV overdrive) |
| Common-Mode Input Range | — | 0 V to VCC - 1.5 V (ground sensing) |
| Quiescent Current (typ) | — | 0.4 mA per comparator (0.8 mA total) |