MAX1480BEPI+ vs MAX1480BCPI+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX1480BEPI+ tarafından Maxim Integrated ve MAX1480BCPI+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX1480BEPI+ | MAX1480BCPI+ |
|---|---|---|
| Marka | Maxim Integrated | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Complete electrically isolated RS-485/RS-422 data interface | — |
| Transceiver Configuration | 1 driver / 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Veri Hızı | 250 kb/s | 250 kbps |
| Isolation | Electrically isolated | — |
| Driver Slew Rate | Reduced-slew-rate driver | — |
| Receiver Hysteresis | 70 mV | 70 mV |
| Supply Architecture | Single +5 V supply on logic side powers both sides | — |
| Paket | 28-pin PDIP | 28-PDIP (0.600", 15.24 mm wide) |
| Paket / Kas | 28-DIP (0.600 inch, 15.24 mm) | — |
| Montaj Türü | Through-hole | Through-Hole |
| İşletim Sıcaklığı | 0 °C to +70 °C | -40C to +85C |
| Application Category | EMI-sensitive isolated data interfaces | — |
| RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Isolation Voltage | [DATA_NEEDED: isolation voltage rating] | 1000 Vrms (galvanic, transformer-based) |
| Common-Mode Voltage | [DATA_NEEDED: common-mode voltage rating] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Supply Voltage (Logic Side) | — | 5 V (single supply) |
| Number of Nodes on Bus | — | Up to 32 transceivers |
| Slew Rate | — | Reduced (low-EMI drivers) |
| Construction | — | Hybrid microcircuit (CMOS + pulse transformer) |
| RoHS Durumu | — | Compliant |
| Lead-Free / Halogen-Free | — | [DATA_NEEDED: lead-free / halogen-free status] |