MAX232NE4 vs MAX232EIN Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX232NE4 tarafından Texas Instruments ve MAX232EIN tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MAX232NE4 | MAX232EIN |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Device Type | Dual EIA-232 driver/receiver transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Veri Hızı | 120 kbit/s | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Supply Configuration | Single 5 V supply | — |
| Charge-Pump Capacitor Value | 1.0 uF | — |
| Input Voltage Level | ±30 V maximum | — |
| Driver Supply Current | 8 mA typical | — |
| ESD Protection | 8 mA typical; ±2 kV human-body-model ESD for the MAX232 family | — |
| Driver Output Level | ±9 V typical | — |
| Protocol | RS-232 / EIA-232 | — |
| Duplex Mode | Full duplex | — |
| Paket | 16-pin PDIP | 16-pin PDIP |
| Package Dimensions | 0.300 in (7.62 mm) DIP width | — |
| Montaj Türü | Through-hole | Through Hole |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | RS-232 transceiver |
| Nominal Supply Voltage | — | 5 V |
| Maximum Data Rate | — | 250 kbps |
| Logic Compatibility | — | TTL/CMOS |
| ESD Protection Standard | — | IEC 61000-4-2 |
| Charge Pump | — | Integrated |
| Pin Sayısı | — | 16 |
| Logic Output Voltage | — | [DATA_NEEDED: logic output voltage] |
| RS-232 Output Voltage | — | [DATA_NEEDED: RS-232 output voltage] |
| Durağan Akım | — | [DATA_NEEDED: quiescent current] |