MAX3221IDBR vs MAX3221CDBR Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX3221IDBR tarafından Texas Instruments ve MAX3221CDBR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
MAX3221CDBR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3221CDBR ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX3221IDBR | MAX3221CDBR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Single-channel RS-232 line driver and receiver | Single-channel RS-232 line driver/receiver transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| ESD Protection | ±15 kV HBM on serial-port connection pins, including GND | ±15 kV |
| Typical Standby Current | 1 µA | — |
| External Charge-Pump Capacitors | 4 × 0.1 µF | — |
| Receiver Enable Control | 1 dedicated enable input | — |
| Logic Input Compatibility | Accepts 5 V logic input with 3.3 V supply | — |
| RS-232 Compliance | TIA/EIA-232-F and ITU V.28 | — |
| Charge-Pump Architecture | Dual charge-pump circuit | Dual charge-pump circuit |
| Paket | 16-pin SSOP | 16-pin SSOP |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Duplex Mode | — | Full duplex |
| Receiver Control | — | Dedicated enable pin |
| Minimum Operating Temperature | — | -40 °C |
| Maximum Operating Temperature | — | [DATA_NEEDED: maximum operating temperature] |
| Operating Supply Current | — | 1 mA |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Package Dimensions | — | [DATA_NEEDED: package body dimensions] |