MAX3483ESA+ vs MAX3483ECSA+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX3483ESA+ tarafından Maxim Integrated ve MAX3483ECSA+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
MAX3483ECSA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483ECSA+ ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX3483ESA+ | MAX3483ECSA+ |
|---|---|---|
| Marka | Maxim Integrated | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Verified Supply Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Interface Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | — |
| EMI Control | Slew-rate limitation reduces EMI and reflections | — |
| Low-Speed Error-Free Transmission | Up to 250 kbps | — |
| Power Architecture | 3.3V-powered, low-power transceiver | — |
| Paket | 8-SOIC | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Operating Voltage | 3 V to 3.6 V | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Besleme Akımı | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Receiver Output Type | [DATA_NEEDED: receiver output type] | — |
| Termination Requirement | [DATA_NEEDED: termination and biasing details] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Transceiver Configuration | — | 1 driver / 1 receiver, half-duplex |
| Bus Standard | — | RS-485 and RS-422 |
| ESD Protection, Human Body Model | — | ±15 kV |
| ESD Protection, IEC 1000-4-2 Contact Discharge | — | ±8 kV |
| ESD Protection, IEC 1000-4-2 Air Gap Discharge | — | ±15 kV |
| Logic Compatibility | — | 3.3 V operation with 5 V logic interoperability |
| Transmitter Edge Rate | — | Slew-rate limited |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |