MCHC705JJ7CPE vs MC68HC908QT2MDW Karşılaştırma
Ayrıntılı yan yana karşılaştırma MCHC705JJ7CPE tarafından NXP Semiconductors ve MC68HC908QT2MDW tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MC68HC908QT2MDW - 8-bit 5V 1.5KB Flash MCU, SO-8 | NXP / Freescale
MC68HC908QT2MDW NrndÖzellik Karşılaştırması
| Parametre | MCHC705JJ7CPE | MC68HC908QT2MDW |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Yaşam Döngüsü Durumu | NRND | NRND |
| Core | HC05 8-bit | — |
| Program Memory Size | 6 KB (6K x 8) OTP | — |
| RAM Size | 224 bytes | — |
| Azami Saat Hızı | 2.1 MHz | — |
| Number of I/O Pins | 14 | — |
| Paket | 20-DIP (0.300", 7.62 mm) | SOEIAJ / SO-8 (gull-wing, 8 terminals) |
| Montaj Türü | Through-Hole (THT) | — |
| ADC | 5-channel, 8-bit (per family datasheet) | [DATA_NEEDED: ADC channel count and resolution for QT2MDW specifically] |
| Timers | 1 x 16-bit with capture/compare | 16-bit timer with input capture / output compare (per QY family header) |
| Serial Interface | SCI (UART) | — |
| İşletim Sıcaklığı | 0C to +70C (C grade) | Automotive grade (-40C to +125C) |
| Program Memory Type | One-Time Programmable (OTP) | — |
| On-chip Monitor ROM | Yes (in-circuit serial programming) | — |
| Internal Oscillator | Yes (typical of HC05 'JJ' family) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED] |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Core Architecture | — | M68HC08 (8-bit CISC, Von Neumann) |
| Family | — | HC08 (QT2 sub-family of QY) |
| Program Memory (Flash) | — | 2 KB |
| RAM | — | 128 bytes |
| Maximum Bus Frequency | — | 8 MHz (internal bus) |
| Supply Voltage Range | — | 3 V to 5 V (typical, per HC08 spec) |
| Watchdog | — | Yes (COP watchdog, on-chip) |
| Brown-out Reset | — | Yes (on-chip low-voltage detect) |
| Low-power Modes | — | Wait and Stop modes |
| Pin Sayısı | — | 8 |
| Debug Interface | — | Single-wire BDM (background debug mode) on IRQ/TCLK |
| Programming | — | On-chip Monitor ROM / in-application programming |
| AEC-Q100 | — | Automotive grade MDW suffix per Freescale part-number convention |