MPX5100DP vs MPX5100A Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPX5100DP tarafından NXP Semiconductors ve MPX5100A tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP
MPX5100DP ✓ AktifÖzellik Karşılaştırması
| Parametre | MPX5100DP | MPX5100A |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Pressure Type | Differential | Absolute |
| Operating Pressure Range | 0 kPa to 100 kPa (0 to 14.5 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | 5 V (nominal) | — |
| Çıkış Gerilimi Aralığı | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) | 0.2 V to 4.7 V |
| Çıkış Türü | Analog, ratiometric to Vcc | Analog, ratiometric |
| Accuracy | ±2.5% (0 to 85 °C) | ±2.5% (over compensated temperature range) |
| Sensitivity | 45 mV/kPa nominal | 45 mV/kPa |
| İşletim Sıcaklığı | -40 °C to +125 °C | 0 C to +85 C (compensated) |
| Response Bandwidth | 1 kHz (typical) | — |
| Port Configuration | Dual ports, male 0.19" (4.93 mm) tube, same side | Single port (absolute) |
| Paket | 6-SIP Module (through-hole) | 6-SIP Module |
| Signal Conditioning | On-chip amplifier, temperature compensation, calibration | — |
| Technology | Piezoresistive MEMS with bipolar ASIC | — |
| Montaj Türü | Through-Hole (SIP) | Through-Hole |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Full-Scale Span (typical) | — | 4.5 V |
| Besleme Gerilimi | — | 5.0 V (typical) |
| Besleme Akımı | — | 10 mA (typical) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature] |
| Response Time | — | [DATA_NEEDED: response time] |