OPA640P vs OPA642PB Karşılaştırma
Ayrıntılı yan yana karşılaştırma OPA640P tarafından Texas Instruments ve OPA642PB tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | OPA640P | OPA642PB |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Voltage-feedback operational amplifier | Wideband, low-distortion, low-gain operational amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Unity-Gain Bandwidth | 1.3 GHz | — |
| Unity-Gain Stability | Unity-gain stable | — |
| Input Voltage Noise Density | 2.9 nV/√Hz | — |
| Common-Mode Rejection Ratio | 85 dB | — |
| Slew Rate | 350 V/µs | [DATA_NEEDED: slew rate] |
| Low-Harmonic-Distortion Frequency | 10 MHz | — |
| Paket | 8-pin PDIP | 8-pin PDIP, 0.300 inch (7.62 mm) pitch |
| Package Technology | Through-hole DIP | — |
| Package Width | 0.300 in (7.62 mm) | — |
| Number of Terminals | 8 terminals | — |
| Temperature Grade | Industrial | Industrial |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Montaj Türü | Through-hole | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Architecture | — | Single voltage-feedback operational amplifier |
| Supply Voltage Range | — | ±4.5 V to ±5.5 V |
| Single Supply Equivalent Range | — | 9 V to 11 V |
| Stated Gain Figure | — | 90 dB |
| Operating Current | — | 25 uA |
| Durağan Akım | — | 70 uA |
| Pin Sayısı | — | 8 pins |
| Terminal Type | — | Through-hole |
| Package Shape | — | Rectangular |
| Output Current | — | [DATA_NEEDED: output current] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |