SN65HVD10P vs SN65HVD12P Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN65HVD10P tarafından Texas Instruments ve SN65HVD12P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | SN65HVD10P | SN65HVD12P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | USB Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Half-duplex RS-485 transceiver | Differential bus transceiver |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Maximum Signaling Rate | 32 Mbps | — |
| Interface Standard | RS-485 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Driver Output Type | Three-state differential line driver | Three-state differential output |
| Receiver Type | Differential line receiver | Differential input line receiver |
| Unit-Load Option | 1/8 unit load, up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | Greater than 16 kV HBM |
| Standards Compliance | ANSI TIA/EIA-485-A and ISO 8482:1993 | — |
| İşletim Sıcaklığı | -40 °C to +85 °C | — |
| Paket | 8-pin PDIP (P) | 8-PDIP |
| Pin Sayısı | 8 pins | 8 pins |
| Montaj Türü | Through-hole | Through-hole |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Device Type | 1/1 transceiver, half-duplex | — |
| Maximum Data Rate | — | 1 Mbps |
| Supported Interfaces | — | RS-422 and RS-485 |
| Maximum Bus Unit Load | — | [DATA_NEEDED: maximum bus unit load] |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Sensitivity | — | [DATA_NEEDED: receiver differential sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| ANSI TIA/EIA-485-A Compliance | — | Meets or exceeds |
| ISO 8482:1993 Compliance | — | Meets or exceeds |