SN65HVD11P vs SN65HVD12P Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN65HVD11P tarafından Texas Instruments ve SN65HVD12P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments
SN65HVD11P ✓ AktifÖzellik Karşılaştırması
| Parametre | SN65HVD11P | SN65HVD12P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Differential transceiver | Differential bus transceiver |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Supported Interfaces | RS-485 and RS-422 | RS-422 and RS-485 |
| Maximum Signaling Rate | 10 Mbps | — |
| Driver Output Type | 3-state differential line driver | Three-state differential output |
| Receiver Type | Differential input line receiver | Differential input line receiver |
| Number of Transceivers per Package | 1 | — |
| Paket | 8-pin PDIP, 7.62 mm pitch | 8-PDIP |
| Pin Sayısı | 8 pins | 8 pins |
| Montaj Türü | Through-hole | Through-hole |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | Greater than 16 kV HBM |
| RS-485 Compliance | Meets or exceeds ISO 8482:1993 | — |
| Transmission Line Type | Balanced transmission line | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Maximum Data Rate | — | 1 Mbps |
| Duplex Mode | — | Half-duplex |
| Maximum Bus Unit Load | — | [DATA_NEEDED: maximum bus unit load] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Sensitivity | — | [DATA_NEEDED: receiver differential sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| ANSI TIA/EIA-485-A Compliance | — | Meets or exceeds |
| ISO 8482:1993 Compliance | — | Meets or exceeds |