SN65HVD12P vs SN65HVD11P Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN65HVD12P tarafından Texas Instruments ve SN65HVD11P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments
SN65HVD11P ✓ AktifÖzellik Karşılaştırması
| Parametre | SN65HVD12P | SN65HVD11P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Differential bus transceiver | Differential transceiver |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Maximum Data Rate | 1 Mbps | — |
| Supported Interfaces | RS-422 and RS-485 | RS-485 and RS-422 |
| Driver Output Type | Three-state differential output | 3-state differential line driver |
| Receiver Type | Differential input line receiver | Differential input line receiver |
| Duplex Mode | Half-duplex | — |
| Paket | 8-PDIP | 8-pin PDIP, 7.62 mm pitch |
| Pin Sayısı | 8 pins | 8 pins |
| Montaj Türü | Through-hole | Through-hole |
| Bus-Pin ESD Protection | Greater than 16 kV HBM | Exceeds 16 kV HBM |
| Maximum Bus Unit Load | [DATA_NEEDED: maximum bus unit load] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Sensitivity | [DATA_NEEDED: receiver differential sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| ANSI TIA/EIA-485-A Compliance | Meets or exceeds | — |
| ISO 8482:1993 Compliance | Meets or exceeds | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Maximum Signaling Rate | — | 10 Mbps |
| Number of Transceivers per Package | — | 1 |
| RS-485 Compliance | — | Meets or exceeds ISO 8482:1993 |
| Transmission Line Type | — | Balanced transmission line |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |