SN74LVC1G125DBVR vs NC7SV125P5X Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN74LVC1G125DBVR tarafından Texas Instruments ve NC7SV125P5X tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
SN74LVC1G125DBVR - 1.65-5.5V 3-State Buffer Gate | TI | SOT-23-5
SN74LVC1G125DBVR ✓ Aktifonsemi
NC7SV125P5X - TinyLogic ULP-A Non-Inverting 3-State Buffer, SC-70-5 | onsemi
NC7SV125P5X ✓ AktifÖzellik Karşılaştırması
| Parametre | SN74LVC1G125DBVR | NC7SV125P5X |
|---|---|---|
| Marka | Texas Instruments | onsemi |
| Kategori | Logic ICs | Logic ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | Single non-inverting buffer / line driver | — |
| Logic Family | LVC (Low-Voltage CMOS) | — |
| Number of Elements | 1 | 1 |
| Bits per Element | 1 | — |
| Çıkış Türü | 3-State | 3-State (Tri-State) |
| Supply Voltage (VCC) | 1.65 V to 5.5 V | — |
| Input Voltage Tolerance | Up to 5.5 V (independent of VCC) | — |
| Maximum Quiescent Current (ICC) | 10 uA | — |
| Output Drive (IOUT) | +/-24 mA at 3.3 V | — |
| Output Enable | Active-low OE (high = Hi-Z) | — |
| Ioff / Partial-Power-Down | Supported | — |
| Propagation Delay (tpd) | Specified at 3.3 V (see datasheet) | — |
| İşletim Sıcaklığı | -40C to +125C | -40 °C to +85 °C |
| Paket | SOT-23-5 (DBV) | SC-70-5 |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | 1 (260C, unlimited) | 1 (unlimited floor life) |
| RoHS Durumu | ROHS3 Compliant | Compliant |
| Manufacturer | — | onsemi |
| Series | — | TinyLogic ULP-A |
| Logic Type | — | Buffer, Non-Inverting |
| Number of Bits per Element | — | 1 |
| VCC Supply Voltage | — | 0.9 V to 3.6 V |
| Output Drive (IOH/IOL) at 3.3 V VCC | — | ±24 mA |
| Quiescent Current (ICC) max | — | [DATA_NEEDED: quiescent current in µA] |
| Propagation Delay (tpd) max | — | [DATA_NEEDED: tpd in ns] |
| Lead-Free / Pb-Free | — | Yes |
| Output Enable (OE\) Polarity | — | Active-Low (OE\ high = Hi-Z output) |