SP485REN-L vs MAX485EESA+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma SP485REN-L tarafından MaxLinear ve MAX485EESA+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ AktifÖzellik Karşılaştırması
| Parametre | SP485REN-L | MAX485EESA+ |
|---|---|---|
| Marka | MaxLinear | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Half-duplex RS-422/RS-485 transceiver | RS-485/RS-422 Transceiver |
| Maximum Data Rate | 5 Mbps | — |
| Receiver Input Load | 1/10 unit load | — |
| Maximum Nodes per Bus | More than 400 transceivers | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Quiescent Supply Current | 900 uA | 1 mA (typical) |
| İşletim Sıcaklığı Aralığı | -40°C to 85°C | -40 °C to +85 °C |
| Paket | 8-pin SOIC, 3.90 mm wide body | — |
| Montaj Türü | Surface mount | Surface Mount |
| Process Technology | BiCMOS | — |
| Receiver Input Impedance | High impedance | 96 kΩ (1/2 unit load) |
| Duplex Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Logic Supply Voltage | 4.75 V to 5.25 V | — |
| Enhanced ESD Protection | [DATA_NEEDED: enhanced ESD protection level] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Protocol | — | RS-485, RS-422 |
| Duplex | — | Half-Duplex |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Veri Hızı | — | Up to 2.5 Mbps |
| ESD Protection (Bus Pins, HBM) | — | ±15 kV |
| Driver Slew Rate | — | Limited (low-EMI) |
| Number of Nodes on Bus | — | 32 (1/2 unit load) |
| Paket / Kas | — | 8-pin SOIC (SO-8, 3.9 mm body) |
| Lead-Free / RoHS Status | — | Lead-Free, RoHS compliant |
| MSL Seviyesi | — | 1 (Unlimited) |